Selective binding of collagen subtypes by integrin alpha 1I, alpha 2I, and alpha 10I domains

Four integrins, namely alpha(1)beta(1), alpha(2)beta(1), alpha(10)beta(1), and alpha(11)beta(1), form a special subclass of cell adhesion receptors. They are all collagen receptors, and they recognize their ligands with an inserted domain (I domain) in their alpha subunit. We have produced the human integrin alpha(10)I domain as a recombinant protein to reveal its ligand binding specificity. In general, alpha(10)I did recognize collagen types I-VI and laminin-1 in a Mg(2+)-dependent manner, whereas its binding to tenascin was only slightly better than to albumin. When alpha(10)I was tested together with the alpha(1)I and alpha(2)I domains, all three I domains seemed to have their own collagen binding preferences. The integrin alpha(2)I domain bound much better to fibrillar collagens (I-III) than to basement membrane type IV collagen or to beaded filament-forming type VI collagen. Integrin alpha(1)I had the opposite binding pattern. The integrin alpha(10)I domain was similar to the alpha(1)I domain in that it bound very well to collagen types IV and VI. Based on the previously published atomic structures of the alpha(1)I and alpha(2)I domains, we modeled the structure of the alpha(10)I domain. The comparison of the three I domains revealed similarities and differences that could potentially explain their functional differences. Mutations were introduced into the alphaI domains, and their binding to types I, IV, and VI collagen was tested. In the alpha(2)I domain, Asp-219 is one of the amino acids previously suggested to interact directly with type I collagen. The corresponding amino acid in both the alpha(1)I and alpha(10)I domains is oppositely charged (Arg-218). The mutation D219R in the alpha(2)I domain changed the ligand binding pattern to resemble that of the alpha(1)I and alpha(10)I domains and, vice versa, the R218D mutation in the alpha(1)I and alpha(10)I domains created an alpha(2)I domain-like ligand binding pattern. Thus, all three collagen receptors appear to differ in their ability to recognize distinct collagen subtypes. The relatively small structural differences on their collagen binding surfaces may explain the functional specifics.     

Divalent cations stabilize the alpha 1 beta 1 integrin I domain.

Recent structural and functional analyses of alpha integrin subunit I domains implicate a region in cation and ligand binding referred to as the metal ion-dependent adhesion site (MIDAS). Although the molecular interactions between Mn2+ and Mg2+ and the MIDAS region have been defined by crystallographic analyses, the role of cation in I domain function is not well understood. Recombinant alpha 1 beta 1 integrin I domain (alpha1-I domain) binds collagen in a cation-dependent manner. We have generated and characterized a panel of antibodies directed against the alpha1-I domain, and selected one (AJH10) that blocks alpha 1 beta 1 integrin function for further study. The epitope of AJH10 was localized within the loop between the alpha 3 and alpha 4 helices which contributes one of the metal coordination sites of the MIDAS structure. Kinetic analyses of antibody binding to the I domain demonstrate that divalent cation is required to stabilize the epitope. Denaturation experiments demonstrate that cation has a dramatic effect on the stabilization of the I domain structure. Mn2+ shifts the point at which the I domain denatures from 3.4 to 6.3 M urea in the presence of the denaturant, and from 49.5 to 58.6 degrees C following thermal denaturation. The structural stability provided to the alpha1-I domain by divalent cations may contribute to augmented ligand binding that occurs in the presence of these cations.     

The relative influence of metal ion binding sites in the I-like domain and the interface with the hybrid domain on rolling and firm adhesion by integrin alpha4beta7

We examined the effect of conformational change at the beta(7) I-like/hybrid domain interface on regulating the transition between rolling and firm adhesion by integrin alpha(4)beta(7). An N-glycosylation site was introduced into the I-like/hybrid domain interface to act as a wedge and to stabilize the open conformation of this interface and hence the open conformation of the alpha(4) beta(7) headpiece. Wild-type alpha(4)beta(7) mediates rolling adhesion in Ca(2+) and Ca(2+)/Mg(2+) but firm adhesion in Mg(2+) and Mn(2+). Stabilizing the open headpiece resulted in firm adhesion in all divalent cations. The interaction between metal binding sites in the I-like domain and the interface with the hybrid domain was examined in double mutants. Changes at these two sites can either counterbalance one another or be additive, emphasizing mutuality and the importance of multiple interfaces in integrin regulation. A double mutant with counterbalancing deactivating ligand-induced metal ion binding site (LIMBS) and activating wedge mutations could still be activated by Mn(2+), confirming the importance of the adjacent to metal ion-dependent adhesion site (ADMIDAS) in integrin activation by Mn(2+). Overall, the results demonstrate the importance of headpiece allostery in the conversion of rolling to firm adhesion.     

Distinct roles of beta1 metal ion-dependent adhesion site (MIDAS), adjacent to MIDAS (ADMIDAS), and ligand-associated metal-binding site (LIMBS) cation-binding sites in ligand recognition by integrin alpha2beta1

Integrin-ligand interactions are regulated in a complex manner by divalent cations, and previous studies have identified ligand-competent, stimulatory, and inhibitory cation-binding sites. In collagen-binding integrins, such as alpha2beta1, ligand recognition takes place exclusively at the alpha subunit I domain. However, activation of the alphaI domain depends on its interaction with a structurally similar domain in the beta subunit known as the I-like or betaI domain. The top face of the betaI domain contains three cation-binding sites: the metal-ion dependent adhesion site (MIDAS), the ADMIDAS (adjacent to MIDAS), and LIMBS (ligand-associated metal-binding site). The role of these sites in controlling ligand binding to the alphaI domain has yet to be elucidated. Mutation of the MIDAS or LIMBS completely blocked collagen binding to alpha2beta1; in contrast mutation of the ADMIDAS reduced ligand recognition but this effect could be overcome by the activating monoclonal antibody TS2/16. Hence, the MIDAS and LIMBS appear to be essential for the interaction between alphaI and betaI, whereas occupancy of the ADMIDAS has an allosteric effect on the conformation of betaI. An activating mutation in the alpha2 I domain partially restored ligand binding to the MIDAS and LIMBS mutants. Analysis of the effects of Ca(2+), Mg(2+), and Mn(2+) on ligand binding to these mutants showed that the MIDAS is a ligand-competent site through which Mn(2+) stimulates ligand binding, whereas the LIMBS is a stimulatory Ca(2+)-binding site, occupancy of which increases the affinity of Mg(2+) for the MIDAS.     

Determinants of ligand binding specificity of the alpha(1)beta(1) and alpha(2)beta(1) integrins.

The alpha(1)beta(1) and alpha(2)beta(1) integrins are cell surface collagen receptors. Cells expressing the alpha(1)beta(1) integrin preferentially adhere to collagen IV, whereas cells expressing the alpha(2)beta(1) integrin preferentially adhere to collagen I. Recombinant alpha(1) and alpha(2) integrin I domains exhibit the same collagen type preferences as the intact integrins. In addition, the alpha(2) integrin I domain binds echovirus 1; the alpha(1) I domain does not. To identify the structural components of the I domains responsible for the varying ligand specificities, we have engineered several alpha(1)/alpha(2) integrin I domain chimeras and evaluated their virus and collagen binding activities. Initially, large secondary structural components of the alpha(2) I domain were replaced with corresponding regions of the alpha(1) I domain. Following analysis in echovirus 1 and collagen binding assays, chimeras with successively smaller regions of alpha(1) I were constructed and analyzed. The chimeras were analyzed by ELISA with several different alpha(2) integrin monoclonal antibodies to assess their proper folding. Three different regions of the alpha(1) I domain, when present in the alpha(2) I domain, conferred enhanced collagen IV binding activity upon the alpha(2) I domain. These include the alpha3 and alpha5 helices and a portion of the alpha6 helix. Echovirus 1 binding was lost in a chimera containing the alphaC-alpha6 loop; higher resolution mapping identified Asn(289) as playing a critical role in echovirus 1 binding. Asn(289) had not been implicated in previous echovirus 1 binding studies. Taken together, these data reveal the existence of multiple determinants of ligand binding specificities within the alpha(1) and alpha(2) integrin I domains.     

Evidence that ligand and metal ion binding to integrin alpha 4beta 1 are regulated through a coupled equilibrium

We have used the highly selective alpha(4)beta(1) inhibitor 2S-[(1-benzenesulfonyl-pyrrolidine-2S-carbonyl)-amino]-4-[4-methyl-2S-(methyl-[2-[4-(3-o-tolyl-ureido)-phenyl]-acetyl]-amino)-pentanoylamino]-butyric acid (BIO7662) as a model ligand to study alpha(4)beta(1) integrin-ligand interactions on Jurkat cells. Binding of [(35)S]BIO7662 to Jurkat cells was dependent on the presence of divalent cations and could be blocked by treatment with an excess of unlabeled inhibitor or with EDTA. K(D) values for the binding of BIO7662 to Mn(2+)-activated alpha(4)beta(1) and to the nonactivated state of the integrin that exists in 1 mm Mg(2+), 1 mm Ca(2+) were <10 pm, indicating that it has a high affinity for both activated and nonactivated integrin. No binding was observed on alpha(4)beta(1) negative cells. Through an analysis of the metal ion dependences of ligand binding, several unexpected findings about alpha(4)beta(1) function were made. First, we observed that Ca(2+) binding to alpha(4)beta(1) was stimulated by the addition of BIO7662. From solution binding studies on purified alpha(4)beta(1), two types of Ca(2+)-binding sites were identified, one dependent upon and the other independent of BIO7662 binding. Second, we observed that the metal ion dependence of ligand binding was affected by the affinity of the ligand for alpha(4)beta(1). ED(50) values for the metal ion dependence of the binding of BIO7762 and the binding of a lower affinity ligand, BIO1211, differed by 2-fold for Mn(2+), 30-fold for Mg(2+), and >1000-fold for Ca(2+). Low Ca(2+) (ED(50) = 5-10 microm) stimulated the binding of BIO7662 to alpha(4)beta(1). The effects of microm Ca(2+) closely resembled the effects of Mn(2+) on alpha(4)beta(1) function. Third, we observed that the rate of BIO7662 binding was dependent on the metal ion concentration and that the ED(50) for the metal ion dependence of BIO7662 binding was affected by the concentration of the BIO7662. These studies point to an even more complex interplay between metal ion and ligand binding than previously appreciated and provide evidence for a three-component coupled equilibrium model for metal ion-dependent binding of ligands to alpha(4)beta(1).     

Determination of metal ion binding sites within the hairpin ribozyme domains by NMR

Cations play an important role in RNA folding and stabilization. The hairpin ribozyme is a small catalytic RNA consisting of two domains, A and B, which interact in the transition state in an ion-dependent fashion. Here we describe the interaction of mono-, di-, and trivalent cations with the domains of the ribozyme, as studied by homo- and heteronuclear NMR spectroscopy. Paramagnetic line broadening, chemical shift mapping, and intermolecular NOEs indicate that the B domain contains four to five metal binding sites, which bind Mn(2+), Mg(2+), and Co(NH(3))(6)(3+). There is no significant structural change in the B domain upon the addition of Co(NH(3))(6)(3+) or Mg(2+). No specific monovalent ion binding sites exist on the B domain, as determined by (15)NH(4)(+) binding studies. In contrast to the B domain, there are no observable metal ion interactions within the internal loop of the A domain. Model structure calculations of Mn(2+) interactions at two sites within the B domain indicate that the binding sites comprise major groove pockets lined with functional groups oriented so that multiple hydrogen bonds can be formed between the RNA and Mn(H(2)O)(6)(2+) or Co(NH(3))(6)(3+). Site 1 is very similar in geometry to a site within the P4-P6 domain of the Tetrahymena group I intron, while site 2 is unique among known ion binding sites. The site 2 ion interacts with a catalytically essential nucleotide and bridges two phosphates. Due to its location and geometry, this ion may play an important role in the docking of the A and B domains.     

alpha 11beta 1 integrin recognizes the GFOGER sequence in interstitial collagens

The integrins alpha(1)beta(1), alpha(2)beta(1), alpha(10)beta(1), and alpha(11)beta(1) are referred to as a collagen receptor subgroup of the integrin family. Recently, both alpha(1)beta(1) and alpha(2)beta(1) integrins have been shown to recognize triple-helical GFOGER (where single letter amino acid nomenclature is used, O = hydroxyproline) or GFOGER-like motifs found in collagens, despite their distinct binding specificity for various collagen subtypes. In the present study we have investigated the mechanism whereby the latest member in the integrin family, alpha(11)beta(1), recognizes collagens using C2C12 cells transfected with alpha(11) cDNA and the bacterially expressed recombinant alpha(11) I domain. The ligand binding properties of alpha(11)beta(1) were compared with those of alpha(2)beta(1). Mg(2+)-dependent alpha(11)beta(1) binding to type I collagen required micromolar Ca(2+) but was inhibited by 1 mm Ca(2+), whereas alpha(2)beta(1)-mediated binding was refractory to millimolar concentrations of Ca(2+). The bacterially expressed recombinant alpha(11) I domain preference for fibrillar collagens over collagens IV and VI was the same as the alpha(2) I domain. Despite the difference in Ca(2+) sensitivity, alpha(11)beta(1)-expressing cells and the alpha(11) I domain bound to helical GFOGER sequences in a manner similar to alpha(2)beta(1)-expressing cells and the alpha(2) I domain. Modeling of the alpha I domain-collagen peptide complexes could partially explain the observed preference of different I domains for certain GFOGER sequence variations. In summary, our data indicate that the GFOGER sequence in fibrillar collagens is a common recognition motif used by alpha(1)beta(1), alpha(2)beta(1), and also alpha(11)beta(1) integrins. Although alpha(10) and alpha(11) chains show the highest sequence identity, alpha(2) and alpha(11) are more similar with regard to collagen specificity. Future studies will reveal whether alpha(2)beta(1) and alpha(11)beta(1) integrins also show overlapping biological functions.     

A minimized human integrin alpha(5)beta(1) that retains ligand recognition

Two isolated recombinant fragments from human integrin alpha(5)beta(1) encompassing the FG-GAP repeats III to VII of alpha(5) and the insertion-type domain from beta(1), respectively, are structurally well defined in solution, based on CD evidence. Divalent cation binding induces a conformational adaptation that is achieved by Ca(2+) or Mg(2+) (or Mn(2+)) with alpha(5) and only by Mg(2+) (or Mn(2+)) with beta(1). Mn(2+) bound to beta(1) is highly hydrated ( approximately 3 water molecules), based on water NMR relaxation, in agreement with a metal ion-dependent adhesion site-type metal coordination. Each fragment saturated with Mg(2+) (or Mn(2+)) binds a recombinant fibronectin ligand in an RGD-dependent manner. A conformational rearrangement is induced on the fibronectin ligand upon binding to the alpha(5), but not to the beta(1) fragment, based on CD. Ligand binding results in metal ion displacement from beta(1). Both alpha(5) and beta(1) fragments form a stable heterodimer (alpha(5)beta(1) mini-integrin) that retains ligand recognition to form a 1:1:1 ternary complex, in the presence of Mg(2+), and induces a specific conformational adaptation of the fibronectin ligand. A two-site model for RGD binding to both alpha and beta integrin components is inferred from our data using low molecular weight RGD mimetics.     

High resolution structures of p-aminobenzamidine- and benzamidine-VIIa/soluble tissue factor: unpredicted conformation of the 192-193 peptide bond and mapping of Ca2+, Mg2+, Na+, and Zn2+ sites in factor VIIa

Factor VIIa (FVIIa) consists of a gamma-carboxyglutamic acid (Gla) domain, two epidermal growth factor-like domains, and a protease domain. FVIIa binds seven Ca(2+) ions in the Gla, one in the EGF1, and one in the protease domain. However, blood contains both Ca(2+) and Mg(2+), and the Ca(2+) sites in FVIIa that could be specifically occupied by Mg(2+) are unknown. Furthermore, FVIIa contains a Na(+) and two Zn(2+) sites, but ligands for these cations are undefined. We obtained p-aminobenzamidine-VIIa/soluble tissue factor (sTF) crystals under conditions containing Ca(2+), Mg(2+), Na(+), and Zn(2+). The crystal diffracted to 1.8A resolution, and the final structure has an R-factor of 19.8%. In this structure, the Gla domain has four Ca(2+) and three bound Mg(2+). The EGF1 domain contains one Ca(2+) site, and the protease domain contains one Ca(2+), one Na(+), and two Zn(2+) sites. (45)Ca(2+) binding in the presence/absence of Mg(2+) to FVIIa, Gla-domainless FVIIa, and prothrombin fragment 1 supports the crystal data. Furthermore, unlike in other serine proteases, the amide N of Gly(193) in FVIIa points away from the oxyanion hole in this structure. Importantly, the oxyanion hole is also absent in the benzamidine-FVIIa/sTF structure at 1.87A resolution. However, soaking benzamidine-FVIIa/sTF crystals with d-Phe-Pro-Arg-chloromethyl ketone results in benzamidine displacement, d-Phe-Pro-Arg incorporation, and oxyanion hole formation by a flip of the 192-193 peptide bond in FVIIa. Thus, it is the substrate and not the TF binding that induces oxyanion hole formation and functional active site geometry in FVIIa. Absence of oxyanion hole is unusual and has biologic implications for FVIIa macromolecular substrate specificity and catalysis.     

Structural analysis of the alpha(2) integrin I domain/procollagenase-1 (matrix metalloproteinase-1) interaction

Previous studies have established that ligation of keratinocyte alpha(2)beta(1) integrin by type I collagen induces expression of matrix metalloproteinase-1 (MMP-1) and that MMP-1 activity is required for the alpha(2)beta(1) integrin-dependent migration of primary keratinocytes across collagenous matrices. We now present evidence that MMP-1 binds the alpha(2)beta(1) integrin via the I domain of the alpha(2) integrin subunit. Using an enzyme-linked immunosorbent assay with purified human MMP-1 and recombinant alpha(2) integrin I domain, we showed that the alpha(2) integrin I domain specifically bound in a divalent cation-dependent manner to both the pro and active forms of MMP-1, but not to MMP-3 or MMP-13. Although both the I domain and MMP-1 bind divalent cations, MMP-1 bound, in a divalent cation-dependent manner, to alpha(2) integrin I domains containing metal ion-dependent adhesion sites motif mutations that prevent divalent cation binding to the I domain, demonstrating that the metal ion dependence is a function of MMP-1. Using a series of MMP-1-MMP-3 and MMP-1-MMP-13 chimeras, we determined that both the linker domain and the hemopexin-like domain of MMP-1 were required for optimal binding to the I domain. The alpha(2) integrin/MMP-1 interaction described here extends an emerging paradigm in matrix biology involving anchoring of proteinases to the cell surface to regulate their biological activities.     

Distinct recognition of collagen subtypes by alpha(1)beta(1) and alpha(2)beta(1) integrins. Alpha(1)beta(1) mediates cell adhesion to type XIII collagen

Two integrin-type collagen receptors, alpha(1)beta(1) and alpha(2)beta(1), are structurally very similar. However, cells can concomitantly express the both receptors and they might have independent functions. Here, Chinese hamster ovary (CHO) cells, which lack endogenous collagen receptors, were transfected with either alpha(1) or alpha(2) integrin cDNA. Cells were allowed to adhere to various collagen types and their integrin function was tested by observing the progression of cell spreading. The cells expressing alpha(1)beta(1) integrin could spread on collagen types I, III, IV, and V but not on type II, while alpha(2)beta(1) integrin could mediate cell spreading on collagen types I-V. Type XIII is a transmembrane collagen and its interaction with the integrins has not been previously studied. CHO-alpha1beta1 cells could spread on human recombinant type XIII collagen, unlike CHO-alpha2beta1 cells. Integrins alpha(1)beta(1) and alpha(2)beta(1) recognize collagens with the specific alphaI domains. The alpha(1)I and alpha(2)I domains were produced as recombinant proteins, labeled with europium and used in a sensitive solid-phase binding assay based on time-resolved fluorescence. alpha(1)I domain, unlike the alpha(2)I domain, could attach to type XIII collagen. The results indicate, that alpha(1)beta(1) and alpha(2)beta(1) have different ligand binding specificity. Distinct recognition of different collagen subtypes by the alphaI domains can partially explain the differences seen in cell spreading. However, despite the fact that CHO-alpha1beta1 cells could not spread on type II collagen alpha(1)I domain could bind to this collagen type. Thus, the cell spreading on collagens may also be regulated by factors other than the integrins.     

Molecular cloning of the rat integrin alpha 1-subunit: a receptor for laminin and collagen

Integrin heterodimers mediate a variety of adhesive interactions, including neuronal attachment to and process outgrowth on laminin. We report here the cloning and primary sequence of an M-200 kD integrin alpha subunit that associates with the integrin beta 1 subunit to form a receptor for both laminin and collagen. Similarities in ligand-binding specificity, relative molecular mass and NH2-terminal sequence make this a strong candidate for the rat homologue of the alpha subunit of the human integrin VLA-1. The full-length rat alpha 1 cDNAs encode a protein containing a purative signal sequence and a mature polypeptide of 1,152 amino acids, with extracellular, transmembrane and cytoplasmic domains. Several structural features are conserved with other integrin alpha chains, including (a) a sequence motif repeated seven times in the NH2-terminal half; (b) potential Ca2+/Mg2+ binding sites in repeats 5, 6, and 7, and (c) alignment of at least 14 of 23 cysteine residues. This rat alpha 1 sequence also contains a 206-amino acid I domain, inserted between repeats 2 and 3, that is homologous to I domains found in the same position in the alpha subunits of several integrins (VLA-2, Mac-1, LFA-1, p150). The rat alpha 1 and human VLA-2 apha subunits share greater than 50% sequence identity in the seven repeats and I domain, suggesting that these sequence identities may underlie some of their similar ligand-binding specificities. However, the rat integrin alpha 1 subunit has several unique features, including a 38-residue insert between two Ca2+/Mg2+ binding domains, and a divergent 15-residue cytoplasmic sequence, that may potentially account for unique functions of this integrin.     

Structures of the alpha L I domain and its complex with ICAM-1 reveal a shape-shifting pathway for integrin regulation

The structure of the I domain of integrin alpha L beta 2 bound to the Ig superfamily ligand ICAM-1 reveals the open ligand binding conformation and the first example of an integrin-IgSF interface. The I domain Mg2+ directly coordinates Glu-34 of ICAM-1, and a dramatic swing of I domain residue Glu-241 enables a critical salt bridge. Liganded and unliganded structures for both high- and intermediate-affinity mutant I domains reveal that ligand binding can induce conformational change in the alpha L I domain and that allosteric signals can convert the closed conformation to intermediate or open conformations without ligand binding. Pulling down on the C-terminal alpha 7 helix with introduced disulfide bonds ratchets the beta 6-alpha 7 loop into three different positions in the closed, intermediate, and open conformations, with a progressive increase in affinity.     

Integrin alpha(2)I domain recognizes type I and type IV collagens by different mechanisms

The collagens are recognized by the alphaI domains of the collagen receptor integrins. A common structural feature in the collagen-binding alphaI domains is the presence of an extra helix, named helix alphaC. However, its participation in collagen binding has not been shown. Here, we have deleted the helix alphaC in the alpha(2)I domain and tested the function of the resultant recombinant protein (DeltaalphaCalpha(2)I) by using a real-time biosensor. The DeltaalphaCalpha(2)I domain had reduced affinity for type I collagen (430 +/- 90 nM) when compared with wild-type alpha(2)I domain (90 +/- 30 nM), indicating both the importance of helix alphaC in type I collagen binding and that the collagen binding surface in alpha(2)I domain is located near the metal ion-dependent adhesion site. Previous studies have suggested that the charged amino acid residues, surrounding the metal ion-dependent adhesion site but not interacting with Mg(2+), may play an important role in the recognition of type I collagen. Direct evidence indicating the participation of these residues in collagen recognition has been missing. To test this idea, we produced a set of recombinant alpha(2)I domains with mutations, namely D219A, D219N, D219R, E256Q, D259N, D292N, and E299Q. Mutations in amino acids Asp(219), Asp(259), Asp(292), and Glu(299) resulted in weakened affinity for type I collagen. When alpha(2) D219N and D292N mutations were introduced separately into alpha(2)beta(1) integrin expressed on Chinese hamster ovary cells, no alterations in the cell spreading on type I collagen were detected. However, Chinese hamster ovary cells expressing double mutated alpha(2) D219N/D292N integrin showed remarkably slower spreading on type I collagen, while spreading on type IV collagen was not affected. The data indicate that alpha(2)I domain binds to type I collagen with a different mechanism than to type IV collagen.     

Characteristics of fibrinogen binding to the domain of CD11c, an alpha subunit of p150,95.

beta2 integrins on leukocytes play important roles on cell-cell or cell-matrix adhesion through their ability to bind multiple ligands. The alpha subunits of leukocyte CD11/CD18 integrins contain an approximately 200-amino-acid inserted domain (I-domain) which is implicated in ligand binding function. To understand the characteristics of ligand binding to the alpha subunit of beta2 integrin p150,95 (CD11c/CD18), a recombinant form of the I-domain of CD11c was generated and analyzed for the interaction with fibrinogen, one of the ligands of p150,95. It was found that the CD11c I-domain bound fibrinogen specifically. Fibrinogen binding to the CD11c I-domain was inhibited by a molar excess of fragment E, a central domain of fibrinogen, and not by that of fragment D, a distal domain of fibrinogen, suggesting that CD11c/CD18 recognizes a central domain of fibrinogen. Divalent cations such as Mg(2+) and Mn(2+) were required for fibrinogen binding to the CD11c I-domain. Also alanine substitutions on the putative metal binding sites of the CD11c I-domain such as Asp(242) and Tyr(209) reduced its ability to bind fibrinogen. These data reinforce the fact that the divalent cation is a prerequisite for ligand binding of the CD11c I-domain.     

Monkey rotavirus binding to alpha2beta1 integrin requires the alpha2 I domain and is facilitated by the homologous beta1 subunit

Rotaviruses utilize integrins during virus-cell interactions that lead to infection. Cell binding and infection by simian rotavirus SA11 were inhibited by antibodies (Abs) to the inserted (I) domain of the alpha2 integrin subunit. To determine directly which integrins or other proteins bind rotaviruses, cell surface proteins precipitated by rotaviruses were compared with those precipitated by anti-alpha2beta1 Abs. Two proteins precipitated by SA11 and rhesus rotavirus RRV from MA104 and Caco-2 cells migrated indistinguishably from alpha2beta1 integrin, and SA11 precipitated beta1 from alpha2beta1-transfected CHO cells. These viruses specifically precipitated two MA104 cell proteins only, but an additional 160- to 165-kDa protein was precipitated by SA11 from Caco-2 cells. The role of the alpha2 I domain in rotavirus binding, infection, and growth was examined using CHO cell lines expressing wild-type or mutated human alpha2 or alpha2beta1. Infectious SA11 and RRV, but not human rotavirus Wa, specifically bound CHO cell-expressed human alpha2beta1 and, to a lesser extent, human alpha2 combined with hamster beta1. Binding was inhibited by anti-alpha2 I domain monoclonal Abs (MAbs), but not by non-I domain MAbs to alpha2, and required the presence of the alpha2 I domain. Amino acid residues 151, 221, and 254 in the metal ion-dependent adhesion site of the alpha2 I domain that are necessary for type I collagen binding to alpha2beta1 were not essential for rotavirus binding. Rotavirus-alpha2beta1 binding led to increased virus infection and RRV growth. SA11 and RRV require the alpha2 I domain for binding to alpha2beta1, and their binding to this integrin is distinguishable from that of collagen.     

Different cation sensitivities and binding site domains of Na+-Ca2+-K+ and Na+-Ca2+ exchangers

We examined inhibitory effects of external multivalent cations Ni(2+), Co(2+), Cd(2+), La(3+), Mg(2+), and Mn(2+) on reverse-mode exchange of the K(+)-dependent Na(+)/Ca(2+) exchanger NCKX2 and the K(+)-independent exchanger NCX1 expressed in CCL-39 cells by measuring the rate of Ca(2+) uptake with radioisotope tracer and electrophysiological techniques. The apparent affinities for block of Ca(2+) uptake by multivalent cations was higher in NCKX2 than NCX1, and the rank order of inhibitory potencies among these cations was different. Additional experiments also showed that external Li(+) stimulated reverse-mode exchange by NCX1, but not NCKX2 in the presence of 5 mM K(+). Thus, both exchangers exhibited differential sensitivities to not only K(+) but also many other external cations. We attempted to locate the putative binding sites within the alpha motifs for multivalent cations by site-directed mutagenesis experiments. The cation affinities of NCKX2 were altered by mutations of amino acid residues in the alpha-1 motif, but not by mutations in the alpha-2 motif. These results contrast with those for NCX1 where mutations in both alpha-1 and alpha-2 motifs have been shown previously to affect cation affinities. Susceptibility tests with sulfhydryl alkylating agents suggested that the alpha-1 and alpha-2 motifs are situated extracellularly and intracellularly, respectively, in both exchangers. A topological model is proposed in which the extracellular-facing alpha-1 motif forms an external cation binding site that includes key residues N203, G207C, and I209 in NCKX2, while both alpha-1 and alpha-2 motifs together form the binding sites in NCX1.     

Effects of conformational activation of integrin alpha 1I and alpha 2I domains on selective recognition of laminin and collagen subtypes

Collagen receptor integrins alpha 1 beta 1 and alpha 2 beta 1 can selectively recognize different collagen subtypes. Here we show that their alpha I domains can discriminate between laminin isoforms as well: alpha 1I and alpha 2I recognized laminin-111, -211 and -511, whereas their binding to laminin-411 was negligible. Residue Arg-218 in alpha1 was found to be instrumental in high-avidity binding. The gain-of-function mutation E318W makes the alpha 2I domain to adopt the "open" high-affinity conformation, while the wild-type alpha 2I domain favors the "closed" low-affinity conformation. The E318W mutation markedly increased alpha 2I domain binding to the laminins (-111, -211 and -511), leading us to propose that the activation state of the alpha 2 beta 1 integrin defines its role as a laminin receptor. However, neither wild-type nor alpha 2IE318W domain could bind to laminin-411. alpha 2IE318W also bound tighter to all collagens than alpha 2I wild-type, but it showed reduced ability to discriminate between collagens I, IV and IX. The corresponding mutation, E317A, in the alpha 1I domain transformed the domain into a high-avidity binder of collagens I and IV. Thus, our results indicate that conformational activation of integrin alpha 1I and alpha 2I domains leads to high-avidity binding to otherwise disfavored collagen subtypes.     

The top of the inserted-like domain of the integrin lymphocyte function-associated antigen-1 beta subunit contacts the alpha subunit beta -propeller domain near beta-sheet 3

We find that monoclonal antibody YTA-1 recognizes an epitope formed by a combination of the integrin alpha(L) and beta(2) subunits of LFA-1. Using human/mouse chimeras of the alpha(L) and beta(2) subunits, we determined that YTA-1 binds to the predicted inserted (I)-like domain of the beta(2) subunit and the predicted beta-propeller domain of the alpha(L) subunit. Substitution into mouse LFA-1 of human residues Ser(302) and Arg(303) of the beta(2) subunit and Pro(78), Thr(79), Asp(80), Ile(365), and Asn(367) of the alpha(L) subunit is sufficient to completely reconstitute YTA-1 reactivity. Antibodies that bind to epitopes that are nearby in models of the I-like and beta-propeller domains compete with YTA-1 monoclonal antibody for binding. The predicted beta-propeller domain of integrin alpha subunits contains seven beta-sheets arranged like blades of a propeller around a pseudosymmetry axis. The antigenic residues cluster on the bottom of this domain in the 1-2 loop of blade 2, and on the side of the domain in beta-strand 4 of blade 3. The I domain is inserted between these blades on the top of the beta-propeller domain. The antigenic residues in the beta subunit localize to the top of the I-like domain near the putative Mg(2+) ion binding site. Thus, the I-like domain contacts the bottom or side of the beta-propeller domain near beta-sheets 2 and 3. YTA-1 preferentially reacts with activated LFA-1 and is a function-blocking antibody, suggesting that conformational movements occur near the interface it defines between the LFA-1 alpha and beta subunits.