Substrate specificity of beta-collagenase from Clostridium histolyticum

The substrate specificity of beta-collagenase from Clostridium histolyticum has been investigated by measuring the rate of hydrolysis of more than 50 tri-, tetra-, penta-, and hexapeptides covering the P3 to P3' subsites of the substrate. The choice of peptides was patterned after sequences found in the alpha 1 and alpha 2 chains of type I collagen. Each peptide contained either a 2-furanacryloyl (FA) or cinnamoyl (CN) group in subsite P2 or the 4-nitrophenylalanine (Nph) residue in subsite P1. Hydrolysis of the P1-P1' bond produces an absorbance change in these chromophoric peptides that has been used to quantitate the rates of their hydrolysis under first order conditions ([S] much less than KM) from kcat/KM values have been obtained. The identity of the amino acids in all six subsites (P3-P3') markedly influences the hydrolysis rates. In general, the best substrates have Gly in subsites P3 and P1', Pro or Ala in subsite P2', and Hyp, Arg, or Ala in subsite P3'. This corresponds well with the frequency of occurrence of these residues in the Gly-X-Y triplets of collagen. In contrast, the most rapidly hydrolyzed substrates do not have residues from collagen-like sequences in subsites P2 and P1. For example, CN-Nph-Gly-Pro-Ala is the best known substrate for beta-collagenase with a kcat/KM value of 4.4 X 10(7) M-1 min-1, in spite of the fact that there is neither Pro nor Ala in P2 or Hyp nor Ala in P1. These results indicate that the previously established rules for the substrate specificity of the enzyme require modification.     

Real-time NMR studies on a transient folding intermediate of barstar.

The refolding of barstar, the intracellular inhibitor of barnase, is dominated by the slow formation of a cis peptidyl prolyl bond in the native protein. The triple mutant C40/82A P27A in which two cysteine residues and one trans proline were replaced by alanine was used as model system to investigate the kinetics and structural consequences of the trans/cis interconversion of Pro48. One- and two-dimensional real-time NMR spectroscopy was used to follow the trans/cis interconversion after folding was initiated by rapid dilution of the urea denatured protein. Series of 1H, 15N HSQC spectra acquired with and without the addition of peptidyl prolyl isomerase unambiguously revealed the accumulation of a transient trans-Pro48 intermediate within the dead time of the experiment. Subtle chemical shift differences between the native state and the intermediate spectra indicate that the intermediate is predominantly native-like with a local rearrangement in the Pro48 loop and in the beta-sheet region including residues Tyr47, Ala82, Thr85, and Val50.     

Complementary substrate specificities of class I and class II collagenases from Clostridium histolyticum

The substrate specificities of three class I (beta, gamma, and eta) and three class II (sigma, epsilon, and zeta) collagenases from Clostridium histolyticum have been investigated by quantitating the kcat/KM values for the hydrolysis of 53 synthetic peptides with collagen-like sequences covering the P3 through P3 subsites of the substrate. For both classes of collagenases, there is a strong preference for Gly in subsites P1' and P3. All six enzymes also prefer substrates that contain Pro and Ala in subsites P2 and P2' and Hyp, Ala, or Arg in subsite P3'. This agrees well with the occupancies of these sites by these residues in type I collagen. However, peptides with Glu in subsites P2 or P2' are not good substrates, even though Glu occurs frequently in these positions in collagen. Conversely, all six enzymes prefer aromatic amino acids in subsite P1, even though such residues do not occur in this position in type I collagen. In general, the class II enzymes have a broader specificity than the class I enzymes. However, they are much less active toward sequences containing Hyp in subsites P1 and P3'. Thus, the two classes of collagenases have similar but complementary sequence specificities. This accounts for the ability of the two classes of enzymes to synergistically digest collagen.     

Kinetic and modeling studies of S3-S3' subsites of HIV proteinases.

Kinetic analysis and modeling studies of HIV-1 and HIV-2 proteinases were carried out using the oligopeptide substrate [formula: see text] and its analogs containing single amino acid substitutions in P3-P3' positions. The two proteinases acted similarly on the substrates except those having certain hydrophobic amino acids at P2, P1, P2', and P3' positions (Ala, Leu, Met, Phe). Various amino acids seemed to be acceptable at P3 and P3' positions, while the P2 and P2' positions seemed to be more restrictive. Polar uncharged residues resulted in relatively good binding at P3 and P2 positions, while at P2' and P3' positions they gave very high Km values, indicating substantial differences in the respective S and S' subsites of the enzyme. Lys prevented substrate hydrolysis at any of the P2-P2' positions. The large differences for subsite preference at P2 and P2' positions seem to be at least partially due to the different internal interactions of P2 residue with P1', and P2' residue with P1. As expected on the basis of amino acid frequency in the naturally occurring cleavage sites, hydrophobic residues at P1 position resulted in cleavable peptides, while polar and beta-branched amino acids prevented hydrolysis. On the other hand, changing the P1' Pro to other amino acids prevented substrate hydrolysis, even if the substituted amino acid had produced a good substrate in other oligopeptides representing naturally occurring cleavage sites. The results suggest that the subsite specificity of the HIV proteinases may strongly depend on the sequence context of the substrate.     

Quantitative evaluation of each catalytic subsite of cathepsin B for inhibitory activity based on inhibitory activity-binding mode relationship of epoxysuccinyl inhibitors by X-ray crystal structure analyses of complexes

To quantitatively estimate the inhibitory effect of each substrate-binding subsite of cathepsin B (CB), a series of epoxysuccinyl derivatives with different functional groups bound to both carbon atoms of the epoxy ring were synthesized, and the relationship between their inhibitory activities and binding modes at CB subsites was evaluated by the X-ray crystal structure analyses of eight complexes. With the common reaction in which the epoxy ring of inhibitor was opened to form a covalent bond with the SgammaH group of the active center Cys29, the observed binding modes of the substituents of inhibitors at the binding subsites of CB enabled the quantitative assessment of the inhibitory effect of each subsite. Although the single blockage of S1' or S2' subsite exerts only the inhibitory effect of IC50 = approximately 24 microM (k2 = approximately 1250 M(-1) s(-1)) or approximately 15 microM (k2 = approximately 1800 M(-1) s(-1)), respectively, the synchronous block of both subsites leads to IC50 = approximately 23 nM (k2 = 153,000 - 185,000 M(-1) s(-1)), under the condition that (i) the inhibitor possesses a P1' hydrophobic residue such as Ile and a P2' hydrophobic residue such as Ala, Ile or Pro, and (ii) the C-terminal carboxyl group of a P2' residue is able to form paired hydrogen bonds with the imidazole NH of His110 and the imidazole N of His111 of CB. The inhibitor of a Pn' > or = 3' substituent was not potentiated by collision with the occluding loop. On the other hand, it was suggested that the inhibitory effects of Sn subsites are independent of those of Sn' subsites, and the simultaneous blockage of the funnel-like arrangement of S2 and S3 subsites leads to the inhibition of IC50 = approximately 40 nM (k2 = approximately 66,600 M(-1) s(-1)) regardless of the lack of Pn' substituents. Here we present a systematic X-ray structure-based evaluation of structure-inhibitory activity relationship of each binding subsite of CB, and the results provide the structural basis for designing a more potent CB-specific inhibitor.     

Cleavage specificity of cucumisin, a serine protease, with synthetic substrates

The substrate specificity of a plant serine protease, cucumisin (EC 3.4.21.25), was studied by the use of synthetic oligopeptides and peptidyl-pNA substrates. Since P1'-Ser, Ala, and Gly substrates were hydrolyzed rapidly, cucumisin appears to prefer a small side chain at the P1' position of the oligopeptide substrate. The k(cat)/Km for the hydrolysis of P1-Leu, Ala, Phe, and Glu substrates demonstrated that they were preferentially cleaved over P1-Lys, diaminopropionic acid (Dap), Gly, Val, and Pro substrates. From the digestion of peptidyl-pNAs, the specificity of the protease was determined to be broad, but the preferential cleavage sites were hydrophobic amino acid residues at the P1 position.     

Sequence specificity of human skin fibroblast collagenase. Evidence for the role of collagen structure in determining the collagenase cleavage site

The sequence specificity of human skin fibroblast collagenase has been investigated by measuring the rate of hydrolysis of 16 synthetic octapeptides covering the P4 through P4' subsites of the substrate. The choice of peptides was patterned after potential collagenase cleavage sites (those containing either the Gly-Leu-Ala or Gly-Ile-Ala sequences) found in types I, II, and III collagens. The initial rate of hydrolysis of the P1-P1' bond of each peptide has been measured by quantitating the concentration of amino groups produced upon cleavage after reaction with fluorescamine. The reactions have been carried out under first-order conditions ([S] much less than KM) and kcat/KM values have been calculated from the initial rates. The amino acids in subsites P3 (Pro, Ala, Leu, or Asn), P2 (Gln, Leu, Hyp, Arg, Asp, or Val), P1' (Ile or Leu), and P4' (Gln, Thr, His, Ala, or Pro) all influence the hydrolysis rates. However, the differences in the relative rates observed for these octapeptides cannot in themselves explain why fibroblast collagenase hydrolyzes only the Gly-Leu and Gly-Ile bonds found at the cleavage site of native collagens. This supports the notion that the local structure of collagen is important in determining the location of the mammalian collagenase cleavage site.     

Modulation of activity and substrate binding modes by mutation of single and double subsites +1/+2 and -5/-6 of barley alpha-amylase 1.

Enzymatic properties of barley alpha-amylase 1 (AMY1) are altered as a result of amino acid substitutions at subsites -5/-6 (Cys95-->Ala/Thr) and +1/+2 (Met298-->Ala/Asn/Ser) as well as in the double mutants, Cys95-->Ala/Met298-->Ala/Asn/Ser. Cys95-->Ala shows 176% activity towards insoluble Blue Starch compared to wild-type AMY1, kcat of 142 and 211% towards amylose DP17 and 2-chloro-4-nitrophenyl beta-d-maltoheptaoside (Cl-PNPG7), respectively, but fivefold to 20-fold higher Km. The Cys95-->Thr-AMY1 AMY2 isozyme mimic exhibits the intermediary behaviour of Cys95-->Ala and wild-type. Met298-->Ala/Asn/Ser have slightly higher to slightly lower activity for starch and amylose, whereas kcat and kcat/Km for Cl-PNPG7 are < or = 30% and < or = 10% of wild-type, respectively. The activity of Cys95-->Ala/Met298-->Ala/Asn/Ser is 100-180% towards starch, and the kcat/Km is 15-30%, and 0.4-1.1% towards amylose and Cl-PNPG7, respectively, emphasizing the strong impact of the Cys95-->Ala mutation on activity. The mutants therefore prefer the longer substrates and the specificity ratios of starch/Cl-PNPG7 and amylose/Cl-PNPG7 are 2.8- to 270-fold and 1.2- to 60-fold larger, respectively, than of wild-type. Bond cleavage analyses show that Cys95 and Met298 mutations weaken malto-oligosaccharide binding near subsites -5 and +2, respectively. In the crystal structure Met298 CE and SD (i.e., the side chain methyl group and sulfur atom) are near C(6) and O(6) of the rings of the inhibitor acarbose at subsites +1 and +2, respectively, and Met298 mutants prefer amylose for glycogen, which is hydrolysed with a slightly lower activity than by wild-type. Met298 AMY1 mutants and wild-type release glucose from the nonreducing end of the main-chain of 6"'-maltotriosyl-maltohexaose thus covering subsites -1 to +5, while productive binding of unbranched substrate involves subsites -3 to +3.     

Roles of the N-terminal domain and remote substrate binding subsites in activity of the debranching barley limit dextrinase

Barley limit dextrinase (HvLD) of glycoside hydrolase family 13 is the sole enzyme hydrolysing α-1,6-glucosidic linkages from starch in the germinating seed. Surprisingly, HvLD shows 150- and 7-fold higher activity towards pullulan and β-limit dextrin, respectively, than amylopectin. This is investigated by mutational analysis of residues in the N-terminal CBM-21-like domain (Ser14Arg, His108Arg, Ser14Arg/His108Arg) and at the outer subsites +2 (Phe553Gly) and +3 (Phe620Ala, Asp621Ala, Phe620Ala/Asp621Ala) of the active site. The Ser14 and His108 mutants mimic natural LD variants from sorghum and rice with elevated enzymatic activity. Although situated about 40 Å from the active site, the single mutants had 15–40% catalytic efficiency compared to wild type for the three polysaccharides and the double mutant retained 27% activity for β-limit dextrin and 64% for pullulan and amylopectin. These three mutants hydrolysed 4,6-O-benzylidene-4-nitrophenyl-6³-α-d-maltotriosyl-maltotriose (BPNPG3G3) with 51–109% of wild-type activity. The results highlight that the N-terminal CBM21-like domain plays a role in activity. Phe553 and the highly conserved Trp512 sandwich a substrate main chain glucosyl residue at subsite +2 of the active site, while substrate contacts of Phe620 and Asp621 at subsite +3 are less prominent. Phe553Gly showed 47% and 25% activity on pullulan and BPNPG3G3, respectively having a main role at subsite +2. By contrast at subsite +3, Asp621Ala increased activity on pullulan by 2.4-fold, while Phe620Ala/Asp621Ala retained only 7% activity on pullulan albeit showed 25% activity towards BPNPG3G3. This outcome supports that the outer substrate binding area harbours preference determinants for the branched substrates amylopectin and β-limit dextrin.     

Rapid determination of substrate specificity of Clostridium histolyticum beta-collagenase using an immobilized peptide library.

The molecular basis of the substrate specificity of Clostridium histolyticum beta-collagenase was investigated using a combinatorial method. An immobilized positional peptide library, which contains 24,000 sequences, was constructed with a 7-hydroxycoumarin-4-propanoyl (Cop) fluorescent group attached at the N terminus of each sequence. This immobilized peptide library was incubated with C. histolyticum beta-collagenase, releasing fluorogenic fragments in the solution phase. The relative substrate specificity (k(cat)/K(m)) for each member of the library was determined by measuring fluorescence intensity in the solution phase. Edman sequencing was used to assign structure to subsites of active substrate mixtures. Collectively, the substrate preference for subsites (P(3)-P(4)') of C. histolyticum beta-collagenase was determined. The last position on the C-terminal side in which the identity of the amino acids affects the activity of the enzyme is P(4)', and an aromatic side chain is preferred in this position. The optimal P(1)'-P(3)' extended substrate sequence is P(1)'-Gly/Ala, P(2)'-Pro/Xaa, and P(3)'-Lys/Arg/Pro/Thr/Ser. The Cop group in either the P(2) or P(3) position is required for a high substrate activity with C. histolyticum beta-collagenase. S(2) and S(3) sites of the protease play a dominant role in fixing the substrate specificity. The immobilized peptide library proved to be a powerful approach for assessing the substrate specificity of C. histolyticum beta-collagenase, so it may be applied to the study of other proteases of interest.     

Study on substrate specificity at subsites for severe acute respiratory syndrome coronavirus 3CL protease

Autocleavage assay and peptide-based cleavage assay were used to study the substrate specificity of 3CL protease from the severe acute respiratory syndrome coronavirus. It was found that the recognition between the enzyme and its substrates involved many positions in the substrate, at least including residues from P4 to P2＇. The deletion of either P4 or P2＇ residue in the substrate would decrease its cleavage efficiency dramatically. In contrast to the previous suggestion that only small residues in substrate could be accommodated to the S 1＇ subsite, we have found that bulky residues such as Tyr and Trp were also acceptable. In addition, based on both peptide-based assay and autocleavage assay, Ile at the PI＇ position could not be hydrolyzed, but the mutant L27A could hydrolyze the Ile peptide fragment. It suggested that there was a stereo hindrance between the S 1＇ subsite and the side chain of Ile in the substrate. All 20 amino acids except Pro could be the residue at the P2＇ position in the substrate, but the cleavage efficiencies were clearly different. The specificity information of the enzyme is helpful for potent anti-virus inhibitor design and useful for other coronavirus studies.     

Peptidyl-prolyl cis-trans isomerase activity as studied by dynamic proton NMR spectroscopy

Recently the identity of the peptidyl-prolyl cis-trans isomerase (PPIase), which accelerates the cis/trans isomerization of prolyl peptide bonds and cyclophilin, the binding protein for the immunosuppressive drug Cyclosporin A (CsA), was discovered. The PPIase catalysis toward the substrate Suc-Ala-Phe-Pro-Phe-pNA has been studied by 1H NMR spectroscopy. Using the bandshape analysis technique the rate of interconversion between the cis and trans isomers of the substrate could be measured in the presence of PPIase and under equilibrium conditions. The acceleration is inhibited by equimolar amounts of CsA. The results provide evidence that the PPIase catalysis is more complex than a simple exchange between two states.     

Active site of chondroitin AC lyase revealed by the structure of enzyme-oligosaccharide complexes and mutagenesis

The crystal structures of Flavobacterium heparinium chondroitin AC lyase (chondroitinase AC; EC 4.2.2.5) bound to dermatan sulfate hexasaccharide (DS(hexa)), tetrasaccharide (DS(tetra)), and hyaluronic acid tetrasaccharide (HA(tetra)) have been refined at 2.0, 2.0, and 2.1 A resolution, respectively. The structure of the Tyr234Phe mutant of AC lyase bound to a chondroitin sulfate tetrasaccharide (CS(tetra)) has also been determined to 2.3 A resolution. For each of these complexes, four (DS(hexa) and CS(tetra)) or two (DS(tetra) and HA(tetra)) ordered sugars are visible in electron density maps. The lyase AC DS(hexa) and CS(tetra) complexes reveal binding at four subsites, -2, -1, +1, and +2, within a narrow and shallow protein channel. We suggest that subsites -2 and -1 together represent the substrate recognition area, +1 is the catalytic subsite and +1 and +2 together represent the product release area. The putative catalytic site is located between the substrate recognition area and the product release area, carrying out catalysis at the +1 subsite. Four residues near the catalytic site, His225, Tyr234, Arg288, and Glu371 together form a catalytic tetrad. The mutations His225Ala, Tyr234Phe, Arg288Ala, and Arg292Ala, revealed residual activity for only the Arg292Ala mutant. Structural data indicate that Arg292 is primarily involved in recognition of the N-acetyl and sulfate moieties of galactosamine, but does not participate directly in catalysis. Candidates for the general base, removing the proton attached to C-5 of the glucuronic acid at the +1 subsite, are Tyr234, which could be transiently deprotonated during catalysis, or His225. Tyrosine 234 is a candidate to protonate the leaving group. Arginine 288 likely contributes to charge neutralization and stabilization of the enolate anion intermediate during catalysis.     

Peptide substrate specificities and protein cleavage sites of human endometase/matrilysin-2/matrix metalloproteinase-26

Human endometase/matrilysin-2/matrix metalloproteinase-26 (MMP-26) is a novel epithelial and cancer-specific metalloproteinase. Peptide libraries were used to profile the substrate specificity of MMP-26 from the P4-P4' sites. The optimal cleavage motifs for MMP-26 were Lys-Pro-Ile/Leu-Ser(P1)-Leu/Met(P1')-Ile/Thr-Ser/Ala-Ser. The strongest preference was observed at the P1' and P2 sites where hydrophobic residues were favored. Proline was preferred at P3, and Serine was preferred at P1. The overall specificity was similar to that of other MMPs with the exception that more flexibility was observed at P1, P2', and P3'. Accordingly, synthetic inhibitors of gelatinases and collagenases inhibited MMP-26 with similar efficacy. A pair of stereoisomers had only a 40-fold difference in K(i)(app) values against MMP-26 compared with a 250-fold difference against neutrophil collagenase, indicating that MMP-26 is less stereoselective for its inhibitors. MMP-26 autodigested itself during the folding process. Two of the major autolytic sites were Leu(49)-Thr(50) and Ala(75)-Leu(76), which still left the cysteine switch sequence (PHC(82)GVPD) intact. This suggests that Cys(82) may not play a role in the latency of the zymogen. Interestingly, inhibitor titration studies revealed that only approximately 5% of the total MMP-26 molecules was catalytically active, indicating that the thiol groups of Cys(82) in the active molecules may be dissociated or removed from the active site zinc ions. MMP-26 cleaved Phe(352)-Leu(353) and Pro(357)-Met(358) in the reactive loop of alpha(1)-proteinase inhibitor and His(140)-Val(141) in insulin-like growth factor-binding protein-1, probably rendering these substrates inactive. Among the fluorescent peptide substrates analyzed, Mca-Pro-Leu-Ala-Nva-Dpa-Ala-Arg-NH(2) displayed the highest specificity constant (30,000/molar second) with MMP-26. This report proposes a working model for the future studies of pro-MMP-26 activation, the design of inhibitors, and the identification of optimal physiological and pathological substrates of MMP-26 in vivo.     

Mutagenesis and subsite mapping underpin the importance for substrate specificity of the aglycon subsites of glycoside hydrolase family 11 xylanases

Glycoside hydrolase family (GH) 11 xylanase A from Bacillus subtilis (BsXynA) was subjected to site-directed mutagenesis to probe the role of aglycon active site residues with regard to activity, binding of decorated substrates and hydrolysis product profile. Targets were those amino acids identified to be important by 3D structure analysis of BsXynA in complex with substrate bound in the glycon subsites and the + 1 aglycon subsite. Several aromatic residues in the aglycon subsites that make strong substrate–protein interactions and that are indispensable for enzyme activity, were also important for the specificity of the xylanase. In the + 2 subsite of BsXynA, Tyr65 and Trp129 were identified as residues that are involved in the binding of decorated substrates. Most interestingly, replacement of Tyr88 by Ala in the + 3 subsite created an enzyme able to produce a wider variety of hydrolysis products than wild type BsXynA. The contribution of the + 3 subsite to the substrate specificity of BsXynA was established more in detail by mapping the enzyme binding site of the wild type xylanase and mutant Y88A with labelled xylo-oligosaccharides. Also, the length of the cord – a long loop flanking the aglycon subsites of GH11 xylanases – proved to impact the hydrolytic action of BsXynA. The aglycon side of the active site cleft of BsXynA, therefore, offers great potential for engineering and design of xylanases with a desired specificity.     

Prime region subsite specificity characterization of human cathepsin D: the dominant role of position 128.

In order to contribute to our understanding of cathepsin D (CatD) active site specificity, two series of chromogenic octapeptides with systematic substitutions in positions P2' and P3' were synthesized. This panel was characterized with native human liver cathepsin D (nHuCatD) and yielded information concerning specificity trends within the S2' and S3' subsites. The pepstatin inhibited crystal structure of nHuCatD (Baldwin et al., 1993) was then utilized in conjunction with these subsite preference data to identify residues suspected of contributing to "prime" side subsite specificity. These residues were targeted for site-directed mutagenesis using the re-engineered recombinant model, "short" pseudocathepsin D (Beyer & Dunn, 1996). As a result of these analyses it was determined that prime region subsites do contribute to the unique specificity of human CatD. Furthermore, it was ascertained that the poly-proline loop does not have an active role in S3' subsite specificity. Lastly, it appears that Ile128 has a dominant role on S2' subsite specificity whereas Val130 does not.     

The amino acid sequence of human chorionic gonadotropin. The alpha subunit and beta subunit.

The amino acid sequences of both the alpha and beta subunits of human chorionic gonadotropin have been determined. The amino acid sequence of the alpha subunit is: Ala - Asp - Val - Gln - Asp - Cys - Pro - Glu - Cys-10 - Thr - Leu - Gln - Asp - Pro - Phe - Ser - Gln-20 - Pro - Gly - Ala - Pro - Ile - Leu - Gln - Cys - Met - Gly-30 - Cys - Cys - Phe - Ser - Arg - Ala - Tyr - Pro - Thr - Pro-40 - Leu - Arg - Ser - Lys - Lys - Thr - Met - Leu - Val - Gln-50 - Lys - Asn - Val - Thr - Ser - Glu - Ser - Thr - Cys - Cys-60 - Val - Ala - Lys - Ser - Thr - Asn - Arg - Val - Thr - Val-70 - Met - Gly - Gly - Phe - Lys - Val - Glu - Asn - His - Thr-80 - Ala - Cys - His - Cys - Ser - Thr - Cys - Tyr - Tyr - His-90 - Lys - Ser. Oligosaccharide side chains are attached at residues 52 and 78. In the preparations studied approximately 10 and 30% of the chains lack the initial 2 and 3 NH2-terminal residues, respectively. This sequence is almost identical with that of human luteinizing hormone (Sairam, M. R., Papkoff, H., and Li, C. H. (1972) Biochem. Biophys. Res. Commun. 48, 530-537). The amino acid sequence of the beta subunit is: Ser - Lys - Glu - Pro - Leu - Arg - Pro - Arg - Cys - Arg-10 - Pro - Ile - Asn - Ala - Thr - Leu - Ala - Val - Glu - Lys-20 - Glu - Gly - Cys - Pro - Val - Cys - Ile - Thr - Val - Asn-30 - Thr - Thr - Ile - Cys - Ala - Gly - Tyr - Cys - Pro - Thr-40 - Met - Thr - Arg - Val - Leu - Gln - Gly - Val - Leu - Pro-50 - Ala - Leu - Pro - Gin - Val - Val - Cys - Asn - Tyr - Arg-60 - Asp - Val - Arg - Phe - Glu - Ser - Ile - Arg - Leu - Pro-70 - Gly - Cys - Pro - Arg - Gly - Val - Asn - Pro - Val - Val-80 - Ser - Tyr - Ala - Val - Ala - Leu - Ser - Cys - Gln - Cys-90 - Ala - Leu - Cys - Arg - Arg - Ser - Thr - Thr - Asp - Cys-100 - Gly - Gly - Pro - Lys - Asp - His - Pro - Leu - Thr - Cys-110 - Asp - Asp - Pro - Arg - Phe - Gln - Asp - Ser - Ser - Ser - Ser - Lys - Ala - Pro - Pro - Pro - Ser - Leu - Pro - Ser-130 - Pro - Ser - Arg - Leu - Pro - Gly - Pro - Ser - Asp - Thr-140 - Pro - Ile - Leu - Pro - Gln. Oligosaccharide side chains are found at residues 13, 30, 121, 127, 132, and 138. The proteolytic enzyme, thrombin, which appears to cleave a limited number of arginyl bonds, proved helpful in the determination of the beta sequence.     

Carboxy-monopeptidase substrate specificity of human cathepsin X

Cathepsin X is a papain-like cysteine protease with restricted positional specificity, acting primarily as a carboxy-monopeptidase. We mapped the specificities at the S2, S1, and S1' subsites of human cathepsin X by systematically and independently substituting the P2, P1, and P1' positions of the carboxy-monopeptidase substrate Abz-FRF(4NO(2)) with natural amino acids. Human cathepsin X has broad S2, S1, and S1' specificities within two orders of magnitude in k(cat)/K(M), excluding proline that is not tolerated at these subsites. Glycine is not favored in S2, but is among the preferred residues in S1 and S1', which highlights S2 as the affinity-determinant subsite. The presence of peculiar residues at several binding site positions (Asp76, His234, Asn75, and Glu72) does not translate into a markedly different sequence specificity profile relative to other human cathepsins. These findings suggest that a specific function of human cathepsin X is unlikely to result from sequence specificity, but rather from a combination of its unique positional specificity and the co-localization of enzyme and substrate in a specific cellular environment.