Synthesis of Arg–Gly–Asp (RGD) Sequence Conjugated Thermo-Reversible Gel via the PEG Spacer Arm as an Extracellular Matrix for a Pheochromocytoma Cell (PC12) Culture

Adhesion molecules composed of Gly–Arg–Gly–Asp–Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 3400) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 days. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 600% in a 10-day trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread. In terms of the cell viability, GRGDS peptides conjugated with the PEG-carrying copolymer gel specifically mediated cell spread. This result supports the theory that specific recognition is the result of interaction between the integrin families on the fibroblast, and the RGD sequence on the p(NiPAAm-co-PEG) copolymer gel.     

Synthesis of Arg-Gly-Asp (RGD) sequence conjugated thermo-reversible gel via the PEG spacer arm as an extracellular matrix for a pheochromocytoma cell (PC12) culture

Adhesion molecules composed of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 3400) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 days. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 600% in a 10-day trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread. In terms of the cell viability, GRGDS peptides conjugated with the PEG-carrying copolymer gel specifically mediated cell spread. This result supports the theory that specific recognition is the result of interaction between the integrin families on the fibroblast, and the RGD sequence on the p(NiPAAm-co-PEG) copolymer gel.     

Enhancement of the adhesion of fibroblasts by peptide containing an Arg-Gly-Asp sequence with poly(ethylene glycol) into a thermo-reversible hydrogel as a synthetic extracellular matrix

In an effort to regulate the behavior of mammalian cell entrapped in a gel, the gels were functionalized with the putative cell-binding (-Arg-Gly-Asp-) (RGD) domain. The adhesion molecules composed of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides and the cell recognition ligands were inculcated into the thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 2000) used as the biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was examined in vitro for its ability to promote cell spreading and to increase the viability of the cells by introducing PEG spacers. ECM poorly adhered to hydrogel lacking adhesion molecules permitting only a 20% spread of the seeded cells after 10 days. When the PEG spacer arms, which were immobilized by a peptide linkage, had been integrated into the hydrogel, the conjugation of RGD improved cell spreading by 600% in a 10-day trial.     

Incorporation of Sulfonylurea into N-Isopropylacrylamide as an Extracellular Matrix for an Artificial Pancreas

High-molecular-weight N-isopropylacrylamide copolymers with small amounts of sulfonylurea (SU, typically 2-4 mol% in the feed) were synthesized by free radical polymerization in benzene. SU-incorporated polymer solutions (5, 6, 8, and 10% w/v) in a culture medium (pH 7.4, 0.15 M ionic strength) with islet cells were mixed and poured into Millicells which supported gel formation. In order to increase the gelation temperature, the SU-incorporated copolymer gel, p(NiPAAm-co-SU), was blended with the p(NiPAAm-co-AAc) polymer at a ratio of 4 to 96. Interaction between the islet cells and the synthetic matrix of SU-incorporated copolymer gel resulted in effective cell viability and such cell functions as insulin secretion. To verify the specific interaction between the SU (K⁺ channel closer)-incorporated copolymer and islet cells, the cells were pretreated with diazoxide, an agonist of the ATP-sensitive K⁺ channel (K⁺ channel opener), before interaction between the polymer and islet cells. This treatment suppressed the action of SU on the islet cells. The results from this study provide evidence that the SU-incorporated copolymer stimulated insulin secretion by specific interaction between SU moieties in the polymer and the islet cells.     

Investigation of MC3T3-E1 cell behavior on the surface of GRGDS-coupled chitosan

The GRGDS (Gly-Arg-Gly-Asp-Ser) peptide has intermediate affinity to alphaVbeta3 and alphaIIbbeta3, which are the integrins most reported to be involved in bone function. In this study, biomimetic chitosan films modified with GRGDS peptide were prepared and were used as a substrate for the in vitro culture of MC3T3-E1 cells in order to investigate the effect of GRGDS modification on MC3T3-E1 cell behavior. The results of electron spectroscopy for chemical analysis (ESCA), attenuated total reflection-Fourier transform infrared spectra (ATR-FTIR), and amino acid analysis (AAA) demonstrated that the chitosan films were successfully modified with GRGDS peptides and that the surface density of the immobilized GRGDS was on the order of 10(-9) mol/cm2. The immobilization of the GRGDS sequence on chitosan as well as the peptide concentration play a significant role in MC3T3-E1 cell behavior. MC3T3-E1 cell attachment, proliferation, migration, differentiation, and mineralization were remarkably greater on GRGDS-coupled chitosan than on unmodified chitosan. Besides, the degree of acceleration of these biological processes was found to be dependent on peptide density. Competitive inhibition of MC3T3-E1 cell attachment using soluble GRGDS peptides indicated that the interaction of MC3T3-E1 cells with the surface of the materials was ligand-specific. Cytoskeleton organization in the fully spread MC3T3-E1 cells was highly obvious on GRGDS-coupled chitosan when compared to the lack of actin fibers noted in the round MC3T3-E1 cells on unmodified chitosan. These results suggest that MC3T3-E1 cell function can be modulated, in a peptide density-dependent manner, by the immobilization of GRGDS peptide on chitosan used for scaffold-based bone tissue engineering.     

Incorporation of sulfonylurea into N-isopropylacrylamide as an extracellular matrix for an artificial pancreas.

High-molecular-weight N-isopropylacrylamide copolymers with small amounts of sulfonylurea (SU, typically 2-4 mol% in the feed) were synthesized by free radical polymerization in benzene. SU-incorporated polymer solutions (5, 6, 8, and 10% w/v) in a culture medium (pH 7.4, 0.15 M ionic strength) with islet cells were mixed and poured into Millicells which supported gel formation. In order to increase the gelation temperature, the SU-incorporated copolymer gel, p(NiPAAm-co-SU), was blended with the p(NiPAAm-co-AAc) polymer at a ratio of 4 to 96. Interaction between the islet cells and the synthetic matrix of SU-incorporated copolymer gel resulted in effective cell viability and such cell functions as insulin secretion. To verify the specific interaction between the SU (K+ channel closer)-incorporated copolymer and islet cells, the cells were pretreated with diazoxide, an agonist of the ATP-sensitive K+ channel (K+ channel opener), before interaction between the polymer and islet cells. This treatment suppressed the action of SU on the islet cells. The results from this study provide evidence that the SU-incorporated copolymer stimulated insulin secretion by specific interaction between SU moieties in the polymer and the islet cells.     

Improved long-term culture of hepatocytes in a hydrogel containing Arg-Gly-Asp (RGD)

Freshly harvested primary rat hepatocytes, which had been entrapped in a synthetic extracellular matrix, were examined for differentiated morphology and enhanced liver-specific functions for long-term culture. A copolymer of N-isopropylacrylamide (98 mol % in the feed) and acrylic acid [poly(NiPAAm-co-AAc)], and the adhesion molecule, Arg-Gly-Asp (RGD), incorporated into a hydrogel, were used to entrap hepatocytes. Over 28 days' culture, the hepatocytes in the RGD-incorporated gel maintained higher viability and produced albumin and urea at constant rates, while there was lower cell viability and less albumin secretion by hepatocytes in poly(NiPAAm-co-AAc). Hepatocytes cultured in the gel with RGD incorporated into it constitutes a potentially useful three-dimensional cell system for application in a bio-artificial liver device.     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Phenotype of hepatocyte spheroids in Arg-GLY-Asp (RGD) containing a thermo-reversible extracellular matrix

The spheroid of specific cells is often regarded as the better form in artificial organs and mammalian cell bioreactors for improved cell-specific functions. In this study, freshly harvested primary rat hepatocytes, which had been cultivated as spheroids and entrapped in a synthetic thermo-reversible extracellular matrix, were examined for differentiated morphology and enhanced liver-specific functions as compared to a control set (hepatocytes in single-cell form). A copolymer of N-isopropylacrylamide (98 mole % in the feed) and acrylic acid (poly(NiPAAm-co-AAc)), and the adhesion molecule, an Arg-Gly-Asp (RGD)-incorporated thermo-reversible matrix, were used to entrap hepatocytes in the form of either spheroids or single cells. In a 28-day culture period, the spheroids in the RGD-incorporated gel maintained higher viability and produced albumin and urea at constant rates, while there was lower cell viability and less albumin secretion by the spheroids in p(NiPAAm-co-AAc). Hepatocytes cultured as spheroids in the RGD-incorporated gel would constitute a potentially useful three-dimensional cell system for application in a bio-artificial liver device.     

Site-directed mutagenesis of the arginine-glycine-aspartic acid sequence in osteopontin destroys cell adhesion and migration functions

Osteopontin (OPN) is a secreted calcium-binding phosphoprotein produced in a variety of normal and pathological contexts, including tissue mineralization and cancer. OPN contains a conserved RGD (arg-gly-asp) amino acid sequence that has been implicated in binding of OPN to cell surface integrins. To determine whether the RGD sequence in OPN is required for adhesive and chemotactic functions, we have introduced two site-directed mutations in the RGD site of the mouse OPN cDNA, in which the RGD sequence was either deleted or mutated to RGE (arg-gly-glu). In order to test the effect of these mutations on OPN function, we expressed control and mutated mouse OPN in E. coli as recombinant glutathione-S-transferase (GST)-OPN fusion proteins. Control mouse GST-OPN was functional in cell adhesion assays, supporting attachment and spreading of mouse (malignant PAP2 ras-transformed NIH 3T3, and, to a lesser extent, normal NIH 3T3 fibroblasts) and human (MDA-MB-435 breast cancer, and normal gingival fibroblast) cells. In contrast, neither of the RGD-mutated OPN proteins (“delRGD” or “RGE”) supported adhesion of any of the cell lines, even when used at high concentrations or for long assay times. GRGDS (gly-arg-gly-asp-ser) peptides inhibited cell adhesion to intact GST-OPN, as well as to fibronectin and vitronectin. In chemotaxis assays, GST-OPN promoted directed cell migration of both malignant (PAP2, MDA-MB-435) and normal (gingival fibroblast, and NIH 3T3) cells, while RGD-mutated OPN proteins did not. Together these results suggest that the conserved RGD sequence in OPN is required for the majority of the protein's cell attachment and migration-stimulating functions.     

Lectin-mediated attachment and ingestion of yeast cells and erythrocytes by hamster fibroblasts

Yeast cell attachment to Concanavalin A (ConA)-coated fibroblasts depends on the degree of saturation of ConA-binding sites on the fibroblast. Under comparable conditions, fresh mouse erythrocytes fail to establish stable contacts with ConA-coated fibroblasts. The interaction of ConA-coated erythrocytes with fibroblasts and of non-coated erythrocytes with wheat germ agglutinin (WGA)-coated fibroblasts is remarkably less efficient than that of yeast cells interacting with ConA-coated fibroblasts. Ingestion of attached cells was not observed in any of the above lectin-mediated cell-cell interactions. Yeast cells coated with ConA show a high extent of attachment to fibroblasts (three-fold that of yeast cell attachment to ConA-coated fibroblasts). The attachment is highly temperature sensitive, being 3 times more at 37 °C than at 14 °C. A significant fraction of attached yeast cells (˜46%) is ingested by the fibroblasts during the 60 min incubation at 37 °C. The ingestion exhibits a strong temperature dependence, being nil at 14 °C and amounting to 150 and 600 ingested yeast cells per 100 fibroblasts at 24 °C and 37 °C, respectively. Transmission and scanning electron microscopy of ConA-mediated yeast cell-fibroblast interaction indicates a tighter interaction when the yeast cells are coated with ConA than when the fibroblasts are coated with ConA. Thus spreading of the plasma membrane around the attached yeast cell as well as transduction of attachment to ingestion could be triggered only under conditions of a very extensive multibridge interaction between the two apposing surfaces. Such an interaction is not achieved when the mobility of ConA-receptors within the fibroblast membrane plane is restricted as a result of crosslinking with ConA.     

Intracellular localization of integrin-like protein and its roles in osmotic stress-induced abscisic acid biosynthesis in Zea mays

Summary. Plants have evolved many mechanisms to cope with adverse environmental stresses. Abscisic acid (ABA) accumulates significantly in plant cells in response to drought conditions, and this is believed to be a major mechanism through which plants enhance drought tolerance. In this study, we explore the possible mechanisms of osmotic stress perception by plant cells and the consequent induction of ABA biosynthesis. Immunoblotting and immunofluorescence localization experiments, using a polyclonal antibody against human integrin β1, revealed the presence of a protein in Zea mays roots that is similar to the integrin proteins of animals and mainly localized in the plasma membrane. Treatment with GRGDS, a synthetic pentapeptide containing an RGD domain, which interacted specifically with the integrin protein and thus blocked the cell wall–plasma membrane interaction, significantly inhibited osmotic stress-induced ABA biosynthesis in cells, and the GRGDS analog which does not contain the RGD domain had no effect. Our results show that a strong interaction exists between the cell wall and plasma membrane and that this interaction is largely mediated by integrin-like proteins. They also imply that the cell wall and/or cell wall–plasma membrane interaction plays important roles in the perception of osmotic stress. Accordingly, we conclude that the cell wall and/or cell wall–plasma membrane interaction mediated by the integrin-like protein plays important roles in osmotic stress-induced ABA biosynthesis in Zea mays. Correspondence: J. S. Liang, College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009, People’s Republic of China.     

Arg-Gly-Asp (RGD) sequence conjugated in a synthetic copolymer bearing a sugar moiety for improved culture of parenchymal cells (hepatocytes)

A copolymer, including a Gly-Arg-Gly-Asp-Ser (GRGDS) sequence and sugar moieties, was synthesized for the culturing of parenchymal cells (hepatocytes). Hepatocyte cells attached to poly[N-p-vinylbenzyl-d-maltonamide-co-6-(p-vinylbenzamido)-hexanoic acid-GRGDS] [poly(VMA-co-VBRGD)]-coated dishes grew approximately 60% better than on other polymer-coated surface for 12 h. Also, about 80% greater albumin secretion (0.38 pg ml^–1) and about 70% greater urea synthesis (0.495 pg ml^–1) from hepatocytes were produced in this matrix as compared with unstimulated cells. The behaviour of hepatocytes on poly(VMA-co-VBGRGDS)-coated dishes was not distinct from those attached to a collagen. The conjugation of the adhesion molecules of the RGD peptide in the poly(VMA-co-VBGRGDS) copolymer therefore specifically interacts with integrin families on the hepatocyte cell membrane.     

The synergy peptide PHSRN and the adhesion peptide RGD mediate cell adhesion through a common mechanism

This work reports on the role of the synergy peptide PHSRN in mediating the adhesion of cells. The attachment of baby hamster kidney cells and 3T3 Swiss fibroblasts to model substrates presenting either GRGDS or PHSRN was evaluated using self-assembled monolayers of alkanethiolates on gold presenting the peptide ligands mixed with tri(ethylene glycol) groups. These substrates permit rigorous control over the structures and densities of peptide ligands and at the same time prevent nonspecific interactions with adherent cells. Both cell types attached efficiently to monolayers presenting either the RGD or the PHSRN peptide but not to monolayers presenting scrambled peptide GRDGS or HRPSN. Cell attachment was comparable on substrates presenting either peptide ligand but less efficient than on substrates presenting the protein fibronectin. The degree of cell spreading, however, was substantially higher on substrates presenting RGD relative to PHSRN. Staining of 3T3 fibroblasts with anti-vinculin and phalloidin revealed clear cytoskeletal filaments and focal adhesions for cells attached by way of either RGD or PHSRN. Inhibition experiments showed that the attachment of 3T3 fibroblasts to monolayers presenting RGD could be inhibited completely by a soluble RGD peptide and partially by a soluble PHSRN peptide. IMR 90 fibroblast attachment to monolayers presenting PHSRN could be inhibited with anti-integrin alpha(5) or anti-integrin beta(1) antibody. This work demonstrates unambiguously that PHSRN alone can support the attachment of cells and that the RGD and PHSRN bind competitively to the integrin receptors.     

Agar quality of commercial agarophytes from different geographical origins: 1. Physical and rheological properties

Six economically important species ofGracilaria, from a number of commercial sources around the world, andGracilariopsis lemaneiformis, collected from two Japanese localities, were used as the sources of raw material for the evaluation of agar quality. Agar-agar was extracted by pretreatment with various concentratrions of NaOH (0%, 3%, 5%, 7%, 10%) incubated at 80 °C for 2 h. Agar yield, viscosity, dynamic gelling and melting temperature and gel texture were determined for 1.5% agar gels. The highest agar yield was obtained fromG. gracilis from Argentina (39.5%), while the lowest was from BrazilianG. gracilis (13.37%). Dynamic gelling temperature was highest in the agar fromG. gracilis from Turkey (59 °C) and lowest in the non-alkali treated agar isolated fromG. edulis from Indonesia (46 °C). Melting temperature ranged from 96 °C in the agars from the JapaneseGracilariopsis andG. chilensis from Chile to 69 °C in the non-alkali treated agar fromG. edulis from Indonesia. In general, all species produced an agar with high gel strength after treatment with 5% NaOH, except forG. chilensis and the twoGracilariopsis species, which produced an agar with high gel strength after treatment with 3, 7 and 10% NaOH. The highest gel strength (2056 ± 13.6 cm^–2) and hardest gel (261 ± 19.89 g mm^–2) were obtained fromG. lemaneiformis from Japan (Oita Prefecture) after treatment with 7 and 10% NaOH respectively. The lowest gel strength (351 ± 93 cm^–2) was obtained fromG. gracilis from Brazil after treatment with 3% NaOH. The softest gel (66.31 ± 9.63 g mm^–2) was isolated fromG. tenuistipitata from China, after treatment with 3% NaOH. The most flexible gel (11.62 ± 0.31 g mm^–2 × 10²) was obtained fromG. chilensis from Chile after treatment with 3% NaOH.Author for correspondence     

Phenotype of hepatocyte spheroids in synthetic thermo-reversible extracellular matrix

Aggregates of specific cells are often regarded as a better form in artificial organs and mammalian cell bioreactors in terms of cell-specific functionality. In this study, the morphology and liver-specific functions of freshly harvested primary rat hepatocytes, which were cultivated as spheroids and entrapped in a synthetic thermo-reversible extracellular matrix, were examined and compared to a control (hepatocytes in single cell form). A copolymer of N-isopropylacrylamide (98 mole % in feed) and acrylic acid (poly(NiPAAm-co-AAc)), a thermo-reversible copolymer gel matrix, was used to entrap hepatocytes either in spheroids or single cells. During a 7-day culture period, the spheroids maintained higher viability and produced albumin and urea at a relatively constant rate, while the single cell culture showed a slight increase in cell numbers and a reduction in albumin secretion. Hepatocytes cultured as spheroids present a potentially useful three-dimensional cell culture system for application in a bioartificial liver device.     

Modulation of adhesion,spreading and cytoskeleton organization of 3T3 fibroblasts by sulfonic groups present on polymer surfaces

The early phase of 3T3 fibroblast interaction with sulfonated styrene copolymer surfaces, of two sulfonic group densities and thus of differing wettability, was studied. The sulfonic groups present on copolymer surfaces affected the behaviour of cells, i.e. they stimulated cell adhesion, activated cell spreading and influenced cytoskeleton reorganization. The relative number of adhering cells correlated, while the number of spreading cells inversely correlated, with the surface density of sulfonic groups. Cell shape and the pattern of distribution of F-actin, alpha-actinin and vinculin in the interacting cells also depend on the surface density of sulfonic groups. On surfaces of high sulfonic group density, highly polarized cells were observed with F-actin bundles. On surfaces of low sulfonic group density, the cells spread with a square-like morphology with F-actin organized in stress fibres. In contrast, the cells spread poorly on nonsulfonated surfaces and cell adhesion was unaffected by surface wettability. The contribution of alpha(5)beta(1), alpha(4), and beta(5)integrins to the cell interaction with fibronectin (FN) and vitronectin (VN) adsorbed from serum-containing medium on polymer surfaces was examined. Our results suggest that surface sulfonic groups influence the conformation of FN and VN adsorbed on polymer surfaces and, in turn, determine the integrins that are involved in cell adhesion.     

Biosynthesis and Characterization of Poly(3-hydroxybutyrate-co-3- hydroxyhexanoate) from Palm Oil Products in a Wautersia eutropha Mutant

Palm kernel oil, palm olein, crude palm oil and palm acid oil were used for the synthesis of poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)] by a mutant strain of Wautersia eutropha (formerly Ralstonia eutropha) harboring the Aeromonas caviae polyhydroxyalkanoate (PHA) synthase gene. Palm kernel oil was an excellent carbon source for the production of cell biomass and P(3HB-co-3HHx). About 87% (w/w) of the cell dry weight as P(3HB-co-3HHx) was obtained using 5 g palm kernel oil/l. Gravimetric and microscopic analyses further confirmed the high PHA content in the recombinant cells. The molar fraction of 3HHx remained constant at 5 mol % regardless of the type and concentration of palm oil products used. The small amount of 3HHx units was confirmed by ¹³C NMR analysis. The number average molecular weight (M_n) of the PHA copolymer produced from the various palm oil products ranged from 27 0000 to 46 0000 Da. The polydispersity was in the range of 2.6–3.9.     

Covalent attachment of an Arg-Gly-Asp sequence peptide to derivatizable polyacrylamide surfaces: support of fibroblast adhesion and long-term growth

A synthetic nonapeptide (Tyr-Ala-Val-Thr-Gly-Arg-Gly-Asp-Ser), which includes the adhesive Arg-Gly-Asp (RGD) sequence, was covalently immobilized on chemically well-defined polyacrylamide gel surfaces utilizing N-succinimidyl active esters. The amount of peptide immobilized varied linearly with the concentration added to the gels. Immobilization was approximately 80% efficient (based on peptide added), resulting in up to 17.5 nmol peptide/cm2 gel surface. Balb/c 3T3 mouse fibroblast cells adhered readily to peptide-derivatized surfaces, even in the absence of serum. Furthermore, surfaces derivatized with 2 nmol peptide/cm2 gel supported long-term fibroblast growth at a rate and to an extent comparable to that on tissue culture plastic. Surfaces derivatized with a control nonapeptide having no RGD sequence were nonsupportive of cell attachment or growth. The immobilization technology used to derivatize the gel surfaces with adhesive nonapeptide can be modified to allow coderivatization with proteins, glycoproteins, glycosides, or other amine-containing compounds to test their effects on long-term cell behaviors.     

Production of a novel copolyester of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids by Pseudomonas sp. 61-3 from sugars

 Pseudomonas sp. 61-3 (isolated from soil) produced a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA) of C₆, C₈, C₁₀ and C₁₂, when sugars of glucose, fructose and mannose were fed as the sole carbon source. The polyester produced was a blend of homopolymer and copolymer, which could be fractionated with boiling acetone. The acetone-insoluble fraction of the polyester was a homopolymer of 3-hydroxybutyrate units [poly (3HB)], while the acetone-soluble fraction was a copolymer [poly(3HB-co-3HA)] containing both short- and medium-chain-length 3-hydroxyalkanoate units ranging from C₄ to C₁₂:44 mol% 3-hydroxybutyrate, 5 mol% 3-hydroxyhexanoate, 21 mol% 3-hydroxyoctanoate, 25 mol% 3-hydroxydecanoate, 2 mol% 3-hydroxydodecanoate and 3 mol% 3-hydroxy-5-cis-dodecenoate. The copolyester was shown to be a random copolymer of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoate units by analysis of the ¹³C-NMR spectrum. The poly(3HB) homopolymer and poly (3HB-co-3HA) copolymer were produced simultaneously within cells from glucose in the absence of any nitrogen source, which suggests that Pseudomonas sp. 61-3 has two types of polyhydroxy-alkanoate syntheses with different substrate specificities. Received: 9 June 1995/Received last revision: 30 October 1995/Accepted: 6 November 1995