Sugar‐feeding behaviour and longevity of European Culicoides biting midges

Most haematophagous insect vectors can also use sugar as an energy source; thus their sugar‐feeding behaviour influences their longevity and blood‐feeding rate and hence their vectorial capacity. Scant information is available on the sugar‐feeding behaviour of Culicoides Latreille biting midges (Diptera: Ceratopogonidae), which are vectors of bluetongue and Schmallenberg viruses. The longevity of laboratory‐reared Culicoides nubeculosus (Meigen) under fluctuating temperatures (16 and 28 °C) and with access to water or water and blood was on average 6.4 days and 8.9 days, respectively, which was around one third of the lifespan of siblings with access to sugar or sugar and blood (22.2 days and 27.1 days, respectively). Access to honeydew significantly increased the midge's longevity, whereas the provision of extrafloral nectaries had no impact. Females with access to sugar produced a significantly higher number of eggs (65.5 ± 5.2) than their starved sisters (45.4 ± 8.4). More than 80% of field‐caught female Culicoides from the two most abundant European groups, Obsoletus (n = 2243) and Pulicaris (n = 805), were fructose‐positive. Fructose‐positivity was high in all physiological stages and no seasonal variability was noted. The high rate of natural sugar feeding of Culicoides offers opportunities for the development of novel control strategies using toxic sugar baits and for the monitoring of vector‐borne diseases using sugar‐treated FTA (nucleic acid preservation) cards in the field.     

Trap placement and attractant choice affect capture and create sex and parity biases in collections of the biting midge,Culicoides sonorensis

Culicoides sonorensis Wirth & Jones (Diptera: Ceratopogonidae) is the primary North American vector of bluetongue virus (BTV), which can cause high morbidity and mortality in ruminant livestock or wildlife. Worldwide, most Culicoides surveillance relies on light (usually UV) traps typically placed near animals or larval development sites. However, the trapping method can cause sex, species and parity biases in collections. We collected C. sonorensis from three dairies in California using suction traps baited with CO₂, UV light or CO₂ + UV placed near animals, wastewater ponds, or in fields. Higher numbers of parous females were collected using CO₂ + UV traps, although this difference was only significant on one dairy. UV traps were poor at collecting nulliparous females, but the addition of UV to a trap increased the abundance of males in a collection. Traps set in open fields collected significantly higher numbers of males and females than in either of the other two locations. In some cases, there was a significant interaction between the trap type and site. We discuss the limitations of traditional trapping methodologies for C. sonorensis and make suggestions for vector surveillance.     

Multiple night‐time light‐emitting diode lighting strategies impact grassland invertebrate assemblages

White light‐emitting diodes (LEDs) are rapidly replacing conventional outdoor lighting technologies around the world. Despite rising concerns over their impact on the environment and human health, the flexibility of LEDs has been advocated as a means of mitigating the ecological impacts of globally widespread outdoor night‐time lighting through spectral manipulation, dimming and switching lights off during periods of low demand. We conducted a three‐year field experiment in which each of these lighting strategies was simulated in a previously artificial light naïve grassland ecosystem. White LEDs both increased the total abundance and changed the assemblage composition of adult spiders and beetles. Dimming LEDs by 50% or manipulating their spectra to reduce ecologically damaging wavelengths partially reduced the number of commoner species affected from seven to four. A combination of dimming by 50% and switching lights off between midnight and 04:00 am showed the most promise for reducing the ecological costs of LEDs, but the abundances of two otherwise common species were still affected. The environmental consequences of using alternative lighting technologies are increasingly well established. These results suggest that while management strategies using LEDs can be an effective means of reducing the number of taxa affected, averting the ecological impacts of night‐time lighting may ultimately require avoiding its use altogether.     

Laboratory and field evaluations of chemical and plant‐derived potential repellents against Culicoides biting midges in northern Spain

The efficacy of 23 compounds in repelling Culicoides biting midges (Diptera: Ceratopogonidae), particularly Culicoides obsoletus (Meigen) females, was determined by means of a Y‐tube olfactometer. The 10 most effective compounds were further evaluated in landing bioassays. The six most promising compounds (including chemical and plant‐derived repellents) were evaluated at 10% and 25% concentrations in field assays using Centers for Disease Control (CDC) light traps. At least three compounds showed promising results against Culicoides biting midges with the methodologies used. Whereas olfactometer assays indicated DEET at 1 µg/µL to be the most effective repellent, filter paper landing bioassays showed plant‐derived oils to be better. Light traps fitted with polyester mesh impregnated with a mixture of octanoic, decanoic and nonanoic fatty acids at 10% and 25% concentrations collected 2.2 and 3.6 times fewer midges than control traps and were as effective as DEET, which is presently considered the reference standard insect repellent. The best plant‐derived product was lemon eucalyptus oil. Although these have been reported as safe potential repellents, the present results indicate DEET and the mixture of organic fatty acids to be superior and longer lasting.     

Electrical conduction behavior of organic light‐emitting diodes using fluorinated self‐assembled monolayer with molybdenum oxide‐doped hole transporting layer

The electrical conductivity behavior of a fluorinated self‐assembled monolayer (FSAM) of a molybdenum oxide (MoOx)‐doped α‐naphthyl diamine derivative (α‐NPD) in organic light‐emitting diodes (OLEDs) was investigated. The current density of the MoOx‐doped α‐NPD/FSAM device was proportional to its voltage owing to smooth carrier injection through the FSAM and the high carrier density of its bulk. The temperature‐dependent characteristics of this device were investigated. The current density–voltage characteristics at different temperatures were almost the same owing to its very low activation energy. The activation energy of the device was estimated to be 1.056 × 10^?2 [eV] and was very low due to the inelastic electron tunneling of FSAM molecules. Copyright © 2014 John Wiley & Sons, Ltd.     

Eu3+‐tetrakis β‐diketonate complexes for solid‐state lighting application

Eu³⁺–β‐diketonate complexes are used, for example, in solid‐state lighting (SSL) or light‐converting molecular devices. However, their low emission quantum efficiency due to water molecules coordinated to Eu³⁺ and low photostability are still problems to be addressed. To overcome such challenges, we synthesized Eu³⁺ tetrakis complexes based on [Q][Eu(tfaa)₄] and [Q][Eu(dbm)₄] (Q1 = C₂₆H₅₆N⁺, Q2 = C₁₉H₄₂N⁺, and Q3 = C₁₇H₃₈N⁺), replacing the water molecules in the tris stoichiometry. The tetrakis β‐diketonates showed desirable thermal stability for SSL and, under excitation at 390 nm, they displayed the characteristic Eu³⁺ emission in the red spectral region. The quantum efficiencies of the dbm complexes achieved values as high as 51%, while the tfaa complexes exhibited lower quantum efficiencies (28–33%), but which were superior to those reported for the tris complexes. The structures were evaluated using the Sparkle/PM7 model and comparing the theoretical and the experimental Judd–Ofelt parameters. [Q1][Eu(dbm)₄] was used to coat a near‐UV light‐emitting diode (LED), producing a red‐emitting LED prototype that featured the characteristic emission spectrum of [Q1][Eu(dbm)₄]. The emission intensity of this prototype decreased only 7% after 30 h, confirming its high photostability, which is a notable result considering Eu³⁺ complexes, making it a potential candidate for SSL.     

Latitudinal diversity of biting midge species within the Obsoletus group across three habitats in Europe

Culicoides species from the Obsoletus group are important vectors of bluetongue and Schmallenberg virus. This group consists of several species that cannot easily be identified using morphological characteristics. Therefore, limited information is available about their distribution and habitat preferences. In this study, we aimed to elucidate the species composition of the Obsoletus group in three habitat types at climatically different latitudes across Europe. Traps were placed in three habitat types in three countries at different latitudes. After DNA extraction, biting midges were identified using PCR and gel electrophoresis. Extraction of DNA using Chelex proved to be a cost and time efficient method for species identification. A latitudinal effect on the relative abundance of species from the Obsoletus group was found. Species composition was unique for most country‐habitat combinations. The majority of biting midges were either C. obsoletus s.s. or C. scoticus, and both species were found at all latitudes and habitats. Their wide distribution and their high abundance at livestock farms make these species likely candidates for rapid farm‐to‐farm transmission of pathogens throughout Europe. Our results emphasize the need to differentiate Obsoletus group species to better understand their ecology and contribution to pathogen transmission.     

Identification of bloodmeals of the Scottish biting midge, Culicoides impunctatus, by indirect enzyme-linked immunosorbent assay (ELISA)

Abstract. An indirect enzyme-linked immunosorbent assay (ELISA) has been developed to identify the bloodmeal sources of Culicoides impunctatus Goetghebuer. Nightly light trapping in Scotland, between April and September 1992, caught a total of 344 blood-engorged female C. impunctatus , all in May, June and July. The insects were stored in 70% ethanol and tested 5–7 months later. Bloodmeal sources were positively identified for 246 (71.5%). Bovine hosts were most common (38.4%), followed by deer (23.0%) and sheep (9.9%). Only one midge had fed on human blood. Relatively freshly fed (<24h), fully engorged females gave the clearest results. The wider applications of the technique to the study of Culicoides host preferences is discussed.     

Luminescent properties of Ca3SiO4Cl2 co‐doped with Ce3+ and Eu2+ for near‐ultraviolet light‐emitting diodes

Ca₃SiO₄Cl₂ co‐doped with Ce³⁺,Eu²⁺ was prepared by high temperature reaction. The structure, luminescent properties and the energy transfer process of Ca₃SiO₄Cl₂: Ce³⁺,Eu²⁺ were investigated. Eu²⁺ ions can give enhanced green emission through Ce³⁺ → Eu²⁺ energy transfer in these phosphors. The green phosphor Ca_2.9775SiO₄Cl₂:0.0045Ce³⁺,0.018Eu²⁺ showed intense green emission with broader excitation in the near‐ultraviolet light range. A green light‐emitting diode (LED) based on this phosphor was made, and bright green light from this green LED could be observed by the naked eye under 20 mA current excitation. Hence it is considered to be a good candidate for the green component of a three‐band white LED. Copyright © 2015 John Wiley & Sons, Ltd.     

Observation of an improved healing process in superficial skin wounds after irradiation with a blue‐LED haemostatic device

The healing process of superficial skin wounds treated with a blue‐LED haemostatic device is studied. Four mechanical abrasions are produced on the back of 10 Sprague Dawley rats: two are treated with the blue‐LED device, while the other two are left to naturally recover. Visual observations, non‐linear microscopic imaging, as well as histology and immunofluorescence analyses are performed 8 days after the treatment, demonstrating no adverse reactions neither thermal damages in both abraded areas and surrounding tissue. A faster healing process and a better‐recovered skin morphology are observed: the treated wounds show a reduced inflammatory response and a higher collagen content.

Blue LED induced photothermal effect on superficial abrasions.     

Performance of light‐emitting diode traps for collecting sand flies in entomological surveys in Argentina

The performance of two light‐emitting diode traps with white and black light for capturing phlebotomine sand flies, developed by the Argentinean Leishmaniasis Research Network (REDILA‐WL and REDILA‐BL traps), were compared with the traditional CDC incandescent light trap. Entomological data were obtained from six sand fly surveys conducted in Argentina in different environments. Data analyses were conducted for the presence and the abundance of Lutzomyia longipalpis, Migonemyia migonei, and Nyssomyia whitmani (106 sites). No differences were found in presence/absence among the three types of traps for all sand fly species (p>0.05). The collection mean of Lu. longipalpis from the REDILA‐BL didn´t differ from the CDC trap means, nor were differences seen between the REDILA‐WL and the CDC trap collection means (p>0.05), but collections were larger from the REDILA‐BL trap compared to the REDILA‐WL trap (p<0.05). For Mg. migonei and Ny. whitmani, no differences were found among the three types of traps in the number of individuals captured (p>0.05). These results suggest that both REDILA traps could be used as an alternative capture tool to the original CDC trap for surveillance of these species, and that the REDILA‐BL will also allow a comparable estimation of the abundance of these flies to the CDC light trap captures. In addition, the REDILA‐BL has better performance than the REDILA‐WL, at least for Lu. longipalpis.     

Phylogenetic status and matrilineal structure of the biting midge, Culicoides imicola, in Portugal, Rhodes and Israel

The biting midge Culicoides imicola Kieffer (Diptera: Ceratopogonidae) is the most important Old World vector of African horse sickness (AHS) and bluetongue (BT). Recent increases of BT incidence in the Mediterranean basin are attributed to its increased abundance and distribution. The phylogenetic status and genetic structure of C. imicola in this region are unknown, despite the importance of these aspects for BT epidemiology in the North American BT vector. In this study, analyses of partial mitochondrial cytochrome oxidase subunit I gene (COI) sequences were used to infer phylogenetic relationships among 50 C. imicola from Portugal, Rhodes, Israel, and South Africa and four other species of the Imicola Complex from southern Africa, and to estimate levels of matrilineal subdivision in C. imicola between Portugal and Israel. Eleven haplotypes were detected in C. imicola, and these formed one well-supported clade in maximum likelihood and Bayesian trees implying that the C. imicola samples comprise one phylogenetic species. Molecular variance was distributed mainly between Portugal and Israel, with no haplotypes shared between these countries, suggesting that female-mediated gene flow at this scale has been either limited or non-existent. Our results provide phylogenetic evidence that C. imicola in the study areas are potentially competent AHS and BT vectors. The geographical structure of the C. imicola COI haplotypes was concordant with that of BT virus serotypes in recent BT outbreaks in the Mediterranean basin, suggesting that population subdivision in its vector can impose spatial constraints on BT virus transmission.     

Limited attractant range of the black‐light suction trap for the capture of Culicoides biting midges (Diptera: Ceratopogonidae)

The suction light trap (LT) is a standard tool used to capture Culicoides biting midges, when estimating abundances, and mapping species ranges. The exact range of attraction of the LT is in dispute, however, with several studies indicating the range to vary widely, between 4 and 50 m. In this study, the attractant range of a LT, set at various distances (0, 1, 2, 3, 5 and 8 m) from a cow tethered at pasture, is assessed in two trials conducted on a dairy farm in the Netherlands in 2013 and 2014. In the first trial, sweep‐netting and light‐trapping was performed concurrently. Although a Spearman Rank correlation of 0.89 (P = 0.03) showed the two sets of abundance results to be highly correlated, species prevalence differed significantly according to the method used: the Culicoides obsoletus complex dominated the LT observations, whereas Culicoides chiopterus and Culicoides dewulfi were more abundant in those obtained by sweep‐net, due to the former taxon being largely nocturnal, the latter diurnal. There is a distinct negative logarithmic relationship between Culicoides abundance and distance from the vertebrate host, with midge abundance, in the LT, increasing significantly only when it is placed very close to the bait animal, at a distance of 0–1 m. The sharp decay function in the number of Culicoides caught with increasing distance from the LT, limits the comparison of LT surveillance data obtained under various settings, even from within a climatically homogeneous geographical region such as north‐western Europe.     

Preparation of balanced trichromatic white phosphors for solid‐state white lighting

High quality white light‐emitting diodes (LEDs) employ multi‐component phosphor mixtures to generate light of a high color rendering index (CRI). The number of distinct components in a typical phosphor mix usually ranges from two to four. Here we describe a systematic experimental technique for starting with phosphors of known chromatic properties and arriving at their respective proportions for creating a blended phosphor to produce light of the desired chromaticity. This method is applicable to both LED pumped and laser diode (LD) pumped white light sources. In this approach, the radiometric power in the down‐converted luminescence of each phosphor is determined and that information is used to estimate the CIE chromaticity coordinate of light generated from the mixed phosphor. A suitable method for mixing multi‐component phosphors is also described. This paper also examines the effect of light scattering particles in phosphors and their use for altering the spectral characteristics of LD‐ and LED‐generated light. This is the only approach available for making high efficiency phosphor‐converted single‐color LEDs that emit light of wide spectral width.     

Artifact‐free objective‐type multicolor total internal reflection fluorescence microscopy with light‐emitting diode light sources—Part I

Total internal reflection fluorescence excitation (TIRF) microscopy allows the selective observation of fluorescent molecules in immediate proximity to an interface between different refractive indices. Objective‐type or prism‐less TIRF excitation is typically achieved with laser light sources. We here propose a simple, yet optically advantageous light‐emitting diode (LED)‐based implementation of objective‐type TIRF (LED‐TIRF). The proposed LED‐TIRF condenser is affordable and easy to set up at any epifluorescence microscope to perform multicolor TIRF and/or combined TIRF‐epifluorescence imaging with even illumination of the entire field of view. Electrical control of LED light sources replaces mechanical shutters or optical modulators. LED‐TIRF microscopy eliminates safety burdens that are associated with laser sources, offers favorable instrument lifetime and stability without active cooling. The non‐coherent light source and the type of projection eliminate interference fringing and local scattering artifacts that are associated with conventional laser‐TIRF. Unlike azimuthal spinning laser‐TIRF, LED‐TIRF does not require synchronization between beam rotation and the camera and can be monitored with either global or rolling shutter cameras. Typical implementations, such as live cell multicolor imaging in TIRF and epifluorescence of imaging of short‐lived, localized translocation events of a Ca²⁺‐sensitive protein kinase C α fusion protein are demonstrated.