Stereochemistry of a diastereoisomeric amphiphile and the species of the lipase influence enzyme activity in the transesterification catalyzed by a lipase-co-lyophilizate with the amphiphile in organic media

Modified Candida rugosa and Pseudomonas cepacia lipase (CRL and PCL) were co-lyophilized with two pairs of synthetic diastereoisomeric amphiphiles, d- and l-2-(2,3,4,5,6-pentahydroxy-hexanoylamino)-propyl]-carbamoyl-propionylamino)-pentanedioic acid didodecyl ester (d- and l-BIG2C₁₂CA); d- and l-2-(2,3,4,5,6-pentahydroxy-hexanoylamino)-pentanedioic acid didodecyl ester (d- and l-2C₁₂GE). Enzyme activities of the modified lipase in the transesterification in organic solvent were evaluated. Both pairs of the diastereoisomeric amphiphiles showed enhanced enzyme activity in the transacetylation between racemic sulcatol and isopropenyl acetate in diisopropyl ether, catalyzed by the PCL-co-lyophilizate, by 19–48 fold when compared to the native lipase lyophilized from buffer alone independent of the stereochemistry of the amphiphiles, while in the case of the CRL-co-lyophilizate only the l-BIG2C₁₂CA showed enhanced enzyme activity in the transbutyrylation between racemic solketal and vinyl butyrate in cyclohexane as high as 68–78 fold.     

Partition of protein (lipase) through insoluble complex with amphiphiles

Summary An insoluble complex of soluble protein (lipase fraction) and commercially available amphiphile was prepared. The extraction of protein from complex revealed that the protein interacted with amphiphile was specific. The capacity of a protein to form the insoluble complex depended on its solubility and on amphiphile used in preparing solution. It suggested that the commercially available amphiphiles might be effective for partitioning soluble protein.     

Enhancement of Candida rugosa lipase activity in non-aqueous media by co-lyophilization with amphiphiles from aqueous solution

Modified Candida rugosa lipase was co-lyophilized with two gemini-type amphiphiles, l- and d-2-(3-bis-[3-(2,3,4,5,6-pentahydroxy-hexanoylamino)-propyl]-carbamoyl -propionylamino)-pentanedioic acid didodecyl ester or dodecanoic acid 2-[(3-bis-[3-(2,3,4,5,6-pentahydroxy-hexanoylamino)-propyl]-carbamoyl -propionyl)-(2-dodecanoyloxy-ethyl)-amino]-ethyl ester. Enzymatic activities of the modified lipases in the transesterification between racemic 2,2-dimethyl-1,3-dioxolane-4-methanol and vinyl butyrate in cyclohexane were enhanced as much as by 37-78, 1.5–5- and 41–83-fold of magnitude relative to that of native enzyme, respectively. The lack of significant enhancement of the enzymatic activity, only in the case of the d-isomeric amphiphile-modified lipase, was considered from the topological view of the amphiphile.     

Lipolytic enzymes with improved activity and selectivity upon adsorption on polymeric nanoparticles

Nanostructured polystyrene (PS) and polymethylmethacrylate (PMMA) were used as carriers for the preparation of bioconjugates with lipolytic enzymes, such as Candida rugosa lipase (CRL) and Pseudomonas cepacia lipase (PCL). Simple addition of the lipase solution to the polymeric nanoparticles under protein-friendly conditions (pH 7.6) led to the formation of polymer-enzyme bioconjugates. Energy filtered-transmission electron microscopy (EF-TEM) performed on immuno-gold labeled samples revealed that the enzyme preferentially binds to the polymer nanoparticles and that the binding does not affect the nanostructured features of the carriers. The studies performed on the activity of the bioconjugates pointed out that the lipases adsorbed onto polymeric nanoparticles show an improved performance in terms of activity and selectivity with respect to those shown by lipases adsorbed on the same non-nanostructured carriers. The residual activities of CRL and PCL immobilized on nanostructured PMMA and PS reached 60% and 74%, respectively. Moreover, we found that enantioselectivity and pH and thermal stability increase upon immobilization. These results highlight the fact that new protein conformers with improved enantioselectivity stabilized after adsorption on nanoparticles are obtained. On the basis of the chemical structures of the selected polymers and the slopes of the adsorption isotherms, a hydrophobic binding model for lipase/nanostructured polymers is suggested.     

Deciphering the role of charge,hydration, and hydrophobicity for cytotoxic activities and membrane interactions of bile acid based facial amphiphiles

We synthesized four cationic bile acid based facial amphiphiles featuring trimethyl ammonium head groups. We evaluated the role of these amphiphiles for cytotoxic activities against colon cancer cells and their membrane interactions by varying charge, hydration and hydrophobicity. The singly charged cationic Lithocholic acid based amphiphile (LCA-TMA₁) is most cytotoxic, whereas the triply charged cationic Cholic acid based amphiphile (CA-TMA₃) is least cytotoxic. Light microscopy and Annexin-FITC assay revealed that these facial amphiphiles caused late apoptosis. In addition, we studied the interactions of these amphiphiles with model membrane systems by Prodan-based hydration, DPH-based anisotropy, and differential scanning calorimetry. LCA-TMA₁ is most hydrophobic with a hard charge causing efficient dehydration and maximum perturbations of membranes thereby facilitating translocation and high cytotoxicity against colon cancer cells. In contrast, the highly hydrated and multiple charged CA-TMA₃ caused least membrane perturbations leading to low translocation and less cytotoxicity. As expected, Chenodeoxycholic acid and Deoxycholic acid based amphiphiles (CDCA-TMA₂, DCA-TMA₂) featuring two charged head groups showed intermediate behavior. Thus, we deciphered that charge, hydration, and hydrophobicity of these amphiphiles govern membrane interactions, translocation, and resulting cytoxicity against colon cancer cells.     

Molecular assemblies of diazafluorenone Schiff-base amphiphiles. I. Bilayer membrane and its electrochemical oscillations

A new kind of diazafluorenone Schiff base amphiphile has been synthesized from 1,10-phenanthroline. The superior self-assembling properties of the amphiphiles are advantageous for forming surface monolayer and bilayer membranes (BLMs). BLMs formed with these amphiphiles possess very good stability and electrochemical oscillations. The possibility is suggested of developing a new type of chemical sensor with the ability to distinguish various metal ions from the patterns of electrochemical oscillations.     

脂肪族类两亲物对肌浆网膜蛋白结构的影响

本文观察和比较了六种C_(18)脂肪族类两亲物(fatty amphiphile,FA),包括硬脂酸(stearic acid)、硬脂胺(stearyl amine)、硬脂醇(stearyl alcohol)、油酸(oleic acid)、油胺(oleylamine)和油醇(oleyl alcohol),对肌浆网(sarcoplasmic reticulum,SR)钙泵蛋白结构的影响。当FA∶SR(μmol∶mg)的比例为2.67∶1—21.33∶1时,除油醇(oleyl alcohol)外,其余五种FA引起天然兔骨骼肌肌浆网蛋白内源荧光强度降低。随FA∶SR比例升高,降低幅度加大。五种FA的最大降低幅度在10—32％之间。其中带电荷FA比不带电荷FA的作用强,但均未见峰位位移。当FA∶SR的比例为2.67∶1时,除硬脂醇(stearyl alcohol)外,其余五种FA使N-(3-芘)-马来酰胺(N-(3-pyrene)maleimide,N-(3-p)-M)修饰的SR蛋白巯基荧光强度分别上升9％,40％,150％,193％和5％,但也未见峰位位移。ATP可减弱胺类FA引起的SR蛋白内源荧光降低和巯基荧光升高的幅度。油酸、油胺和硬脂胺既抑制SRCa~(2+),Mg~(2+)-ATPase活力和SR钙蓄积,又使SR钙泵蛋白的巯基修饰荧光显著上升。提示C_(18)脂肪族类两亲物使SR功能受损与其引起钙泵蛋白构象的显著变化有关。     

Maltose-neopentyl glycol (MNG) amphiphiles for solubilization, stabilization and crystallization of membrane proteins

The understanding of integral membrane protein (IMP) structure and function is hampered by the difficulty of handling these proteins. Aqueous solubilization, necessary for many types of biophysical analysis, generally requires a detergent to shield the large lipophilic surfaces of native IMPs. Many proteins remain difficult to study owing to a lack of suitable detergents. We introduce a class of amphiphiles, each built around a central quaternary carbon atom derived from neopentyl glycol, with hydrophilic groups derived from maltose. Representatives of this maltose-neopentyl glycol (MNG) amphiphile family show favorable behavior relative to conventional detergents, as manifested in multiple membrane protein systems, leading to enhanced structural stability and successful crystallization. MNG amphiphiles are promising tools for membrane protein science because of the ease with which they may be prepared and the facility with which their structures may be varied.     

Novel cationic vesicle platform derived from vernonia oil for efficient delivery of DNA through plant cuticle membranes

Novel cationic amphiphilic compounds were prepared from vernonia oil, a natural epoxidized triglyceride, and studied with respect to vesicle formation, encapsulation of biomaterials such as DNA, and their physical stability and transport through isolated plant cuticle membranes. The amphiphiles studied were a single-headed compound III (a quaternary ammonium head group with two alkyl chains) and a triple-headed compound IV, which is essentially three molecules of compound III bound together through a glycerol moiety. Vesicles of the two amphiphiles, prepared by sonication in water and solutions of uranyl acetate or the herbicide 2,4-D (2,4-dichloropenoxy acetic acid), were examined by TEM, SEM, AFM, and confocal laser systems and had a spherical shape which encapsulated the solutes with diameters between 40 and 110 nm. Vesicles from amphiphile IV could be made large enough to encapsulate a condensed 5.2kb DNA plasmid (pJD328). Vesicles of amphiphile IV were also shown to pass intact across isolated plant cuticle membranes and the rate of delivery of encapsulated radio-labeled 2,4-D through isolated plant cuticle membranes obtained with these vesicles was clearly greater in comparison to liposomes prepared from dipalmitopyl phosphatidylcholine (DPPC) and the control, nonencapsulated 2,4-D. Vesicles from amphiphiles III and IV were found to be more stable than those of liposomes from DPPC. The data indicate the potential of vesicles prepared from the novel amphiphile IV to be a relatively efficient nano-scale delivery system to transport DNA and other bioactive agents through plant biological barriers. This scientific approach may open the way for further development of efficient in vivo plant transformation systems.     

Effect of reaction parameters on synthesis of citronellyl methacrylate by lipase-catalyzed transesterification

The methacrylate ester of citronellol was synthesized using various lipases as catalyst. The effect of different reaction parameters such as amount of lipase, solvent, temperature, and acylating agent on the conversion of citronellol to citronellyl methacrylate was studied. Methyl methacrylate, vinyl methacrylate, and 2,3-butanedione mono-oxime methacrylate were used as acylating agents. Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Pseudomonas cepacia lipase (Amano-PS) were used as biocatalysts. Diisopropyl ether (DIPE) was found to be the most suitable solvent. The stereoselectivity of CRL in transesterification of (+/-)-citronellol was tested for the optimized reaction parameters.     

Structural characterization of bacteriophage M13 solubilization by amphiphiles

The structural properties of bacteriophage M13 during disassembly were studied in different membrane model systems, composed of a homologue series of the detergents sodium octyl sulfate, sodium decyl sulfate, and sodium dodecyl sulfate. The structural changes during phage disruption were monitored by spin-labeled electron spin resonance (ESR) and circular dichroism spectroscopy. For the purpose of ESR spectroscopy the major coat protein mutants V31C and G38C were site-directed spin labeled in the intact phage particle. These mutants were selected because the mutated sites are located in the hydrophobic part of the protein, and provide good reporting locations for phage integrity. All amphiphiles studied were capable of phage disruption. However, no significant phage disruption was detected below the critical micelle concentration of the amphiphile used. Based on this finding and the linear dependence of phage disruption by amphiphiles on the phage concentration, it is suggested that the solubilization of the proteins of the phage coat by amphiphiles starts with an attachment to and penetration of amphiphile molecules into the phage particle. The amphiphile concentration in the phage increases in proportion to the amphiphile concentration in the aqueous phase. Incorporation of the amphiphile in the phage particle is accompanied with a change in local mobility of the spin-labeled part of the coat protein and its secondary structure. With increasing the amphiphile concentration in the phage particle, a concentration is reached where the concentration of the amphiphile in the aqueous phase is around its critical micelle concentration. A further increase in amphiphile concentration results in massive phage disruption. Phage disruption by amphiphiles appears to be dependent on the phage coat mutations. It is concluded that phage disruption is dependent on a hydrophobic effect, since phage solubilization could significantly be increased by keeping the hydrophilic part of the amphiphile constant, while increasing its hydrophobic part.     

Enzymatic Resolutions of Heterocyclic Alcohols

The butyrates and acetates of heterocyclic alcohols like 3 - hydroxy tetrahydrofuran and - pyran, 3- and 4 - chromanol as well as the corresponding sulfur heterocycles were hydrolyzed using lipase from Candida rugosa (CRL) and from Pseudomonas cepacia, (PCL). Poor to excellent enantioselectivities were obtained depending on the structure of the substrates. An electrostatic amendment to the steric substrate model for PGL is proposed.     

Enzymatic Resolutions of Heterocyclic Alcohols

The butyrates and acetates of heterocyclic alcohols like 3 - hydroxy tetrahydrofuran and - pyran, 3- and 4 - chromanol as well as the corresponding sulfur heterocycles were hydrolyzed using lipase from Candida rugosa (CRL) and from Pseudomonas cepacia, (PCL). Poor to excellent enantioselectivities were obtained depending on the structure of the substrates. An electrostatic amendment to the steric substrate model for PGL is proposed.     

Effects of lipid structure on energy transfer from carbazolyl to anthryl groups in a lipid bilayer.

Two types of chromophoric amphiphiles were synthesized: one of them possesses a molecular structure of N,N-dialkyl aromatic amino acid (5X18 type, where X is A or Cz), and the other alpha,gamma-dialkylglutamate connected to aromatic amino acid (mXG12 type, where m is an integer). 5-N-Ethylcarbazolyl and 9-anthryl groups were chosen as the chromophore, and introduced to each amino acid derivative. All the amphiphiles formed assembly showing gel-liquid crystalline phase transition. The phase-transition temperature of the assembly composed of mXG12-type amphiphile was higher than that of 5X18-type amphiphile. Absorption and CD spectra of 6-(trimethylammonium)hexanoyl-L-3-(5-N-ethylcarbazolyl) alanine N,N-dioctadecylamide bromide (5Cz18) in the assembly indicated the absence of strong ground-state interactions between the carbazolyl groups, while those of 6-(trimethylammonium)hexanoyl-L-3-(5-N-ethylcarbazolyl)alanyl-L-gl utamic acid alpha,gamma-didodecyl ester (5CzG12) or 11-(trimethylammonium)undecanoyl-L-3-(5-N-ethylcarbazolyl)al anyl-L-glutamic acid alpha,gamma-didodecyl ester (10CzG12) indicated the ground-state interactions based on dimer or higher aggregates. Fluorescence spectra of 5Cz18 showed very weak excimer emission, while excimer and/or excited dimer or higher aggregates were observed in the assembly of 5CzG12 or 10CzG12. Similar results were obtained for amphiphiles (mAG12) with anthryl and hydroxyethyldimethylammonium groups in places respectively of carbazolyl and trimethylammonium groups of 5CzG12 and 10CzG12. Taking these results together into consideration, the molecular packing of mXG12 in the assembly should be tighter than that of 5X18. In the binary assembly of 6-(trimethylammonium)hexanoyl-L-3-(9-anthryl) alanine N,N-dioctadecylamide bromide (5A18)/5Cz18 (1/99 mol/mol), about 60% of photoenergy absorbed by the carbazolyl groups was transferred to the anthryl groups, indicating an efficient energy migration along the two-dimensional array of carbazolyl chromophores of 5Cz18. On the other hand, in the mCzG12/mAG12 binary assembly, the energy-transfer efficiency was much lower due to the formation of dimer or the higher aggregates acting as energy-dissipating sites.     

Conversion of a mechanosensitive channel protein from a membrane-embedded to a water-soluble form by covalent modification with amphiphiles

Covalent modification of integral membrane proteins with amphiphiles may provide a general approach to the conversion of membrane proteins into water-soluble forms for biophysical and high-resolution structural studies. To test this approach, we mutated four surface residues of the pentameric Mycobacterium tuberculosis mechanosensitive channel of large conductance (MscL) to cysteine residues as anchors for amphiphile attachment. A series of modified ion channels with four amphiphile groups attached per channel subunit was prepared. One construct showed the highest water solubility to a concentration of up to 4mg/ml in the absence of detergent. This analog also formed native-like, alpha-helical homo-pentamers in the absence of detergent as judged by circular dichroism spectroscopy, size-exclusion chromatography and various light-scattering techniques. Proteins with longer, or shorter polymers attached, or proteins modified exclusively with polar cysteine-reactive small molecules, exhibited reduced to no solubility and higher-order aggregation. Electron microscopy revealed a homogeneous population of particles consistent with a pentameric channel. Solubilization of membrane proteins by covalent attachment of amphiphiles results in homogeneous particles that may prove useful for crystallization, solution NMR spectroscopy, and electron microscopy.     

Controlled micelle conjugation via charged peptide amphiphiles

Abstract We report the first demonstration of nonionic detergent micelle conjugation and phase separation using purpose‐synthesized, peptide amphiphiles, C₁₀‐(Asp)₅ and C₁₀‐(Lys)₅. Clustering is achieved in two different ways. Micelles containing the negatively charged peptide amphiphile C₁₀‐(Asp)₅ are conjugated (a) via a water‐soluble, penta‐Lys mediator or (b) to micelles containing the C₁₀‐(Lys)₅ peptide amphiphile. Both routes lead to phase separation in the form of oil‐rich globules visible in the light microscope. The hydrophobic nature of these regions leads to spontaneous partitioning of hydrophobic dyes into globules that were found to be stable for weeks to months. Extension of the conjugation mechanism to micelles containing a recently discovered, light‐driven proton pump King Sejong 1‐2 (KS1‐2) demonstrates that a membrane protein may be concentrated using peptide amphiphiles while preserving its native conformation as determined by characteristic UV absorption. The potential utility of these peptide amphiphiles for biophysical and biomedical applications is discussed.     

Immobilization of Candida rugosa lipase on poly(allyl glycidyl ether-co-ethylene glycol dimethacrylate) macroporous polymer particles

Macroporous polymer particles containing surface epoxy groups were synthesized for immobilization of Candida rugosa lipase (CRL). The effect of incorporation of two different sets of monomers [allyl glycidyl ether (AGE) and glycidyl methacrylate (GMA)] and the effect of crosslinking density on immobilization of lipase were studied. AGE-co-EGDM polymers gave higher binding and expression of lipase than GMA-co-EGDM polymers. Optimization of immobilization parameters was done with respect to immobilization time and enzyme loading. Amongst AGE-co-EGDM polymer series, AGE-150 polymer found to give maximum lipase activity yield and therefore evaluated for temperature, pH and storage stability. Under optimum conditions, AGE-150 polymer gave 78.40% of activity yield. Immobilized lipase on AGE-150 showed a broader pH, higher temperature and excellent storage stability.     

Interaction of amphiphiles with integral membrane proteins. II. A simple, minimal model for the nonspecific interaction of amphiphiles with the anion exchanger of the erythrocyte membrane

In a previous paper we have reported on the structural perturbation of the erythrocyte membrane anion exchanger by a regular series of model amphiphiles, as shown by differential scanning calorimetry (Gruber, H.J. and Low, P.S., Biochim. Biophys. Acta, preceding article). Now the data are interpreted by a model in which the effects of amphiphile structure upon buffer-membrane partitioning are well separated from the dependence of the intrinsic potencies of membrane-bound amphiphiles upon amphiphile structure. The buffer-membrane partitioning situation was demonstrated to regularly change between extremes within a series of homologous amphiphiles, i.e. from a negligible to a predominant fraction of total amphiphile in the sample residing in the membrane. Based upon this demonstration a large number of reports on the chain length dependence of apparent potency could be reinterpreted in terms of chain length profiles of intrinsic potency, allowing for a comparison of the responses of various membrane proteins to homologous series of amphiphiles. The response patterns for chain length variation could be divided into three distinct classes: the intrinsic potency (i) can be independent of chain length over a very wide range of length, (ii) it can be rather independent up to a critical length where a sudden cut-off in potency occurs, or (iii) it can drop monotonically over a wide range of chain length. The intrinsic potency values of saturated fatty acids in destabilizing the anion exchanger were interpreted by very simple assumptions: only direct interactions between amphiphiles and target proteins and a simple amphiphile partition equilibrium between a pool of equivalent low affinity sites on the protein and the bulk lipid matrix. The observed monotonic decay of the intrinsic potency of saturated fatty acids with increasing chain length from C8 to C20 was translated into a constant increment of free energy by which each additional CH2 favors the transfer away from sites on the protein towards the bulk lipid matrix. Arguments were presented suggesting that the direct interaction between amphiphiles and target protein is completely nonspecific for alkyl chain length while the residual specificity for shorter over longer amphiphiles is due to the higher tendency of longer chains to preferentially bind in the bulk lipid matrix. Thus a completely new role of the lipid as a competitor, rather than a mediator, was postulated.     

Morphological characterization of exovesicles and endovesicles released from human erythrocytes following treatment with amphiphiles.

In order to morphologically characterize exo- and endovesicles released during treatment of erythrocytes with amphiphiles and to look for possible amphiphile-specific effects on the vesiculation pattern, human erythrocytes were treated at 37 degrees C with amphiphiles at concentrations where they exhibit maximum protection against hypotonic haemolysis (cAHmax). Released exo-and endovesicles and treated cells were studied by means of transmission (TEM) and scanning (SEM) electron microscopy. All sphero-echinocytogenic amphiphiles induced a release of both spherical and tubular exovesicles. Dodecyl maltoside, a nonionic amphiphile with a bulky polar head, induced a release of predominantly tubular exovesicles, while all other sphero-echinocytogenic amphiphiles induced a release of predominantly spherical exovesicles. Some branched tubular exovesicles were released by a double-chained cationic amphiphile. Tail- and tongue-like structures were often seen on the exovesicles. Spherical exovesicles were frequently invaginated. Stomatocytogenic amphiphiles induced endovesiculation. In erythrocytes treated with most of the stomatocytogenic amphiphiles the endovesicles were clustered, but with some amphiphiles the endovesicles were randomly distributed. Large ringformed endovesicles (octaethyleneglycol alkyl ethers) and endovesicles in chains (octyl and decyl glucopyranoside) also occurred. The endovesicle membrane was often budding onto the lumen of the vesicle and in some cases this could ultimately lead to a vesicle inside the endovesicle. We conclude that amphiphiles do not only trigger vesiculation, but may also specifically affect the vesiculation processes.     

Enhancement of activity and selectivity of Candida rugosa lipase and Candida antarctica lipase A by bioimprinting and/or immobilization for application in the selective ethanolysis of fish oil

Candida rugosa lipase (CRL) and Candida antarctica lipase A (CALA) with improved activity and selectivity were prepared for use in organic solvent media. CRL bioimprinted with fatty acids exhibited eightfold enhanced transesterification activity in hexane. Combination of bioimprinting and coating with lecithin or with immobilization did not improve the activity further. CALA was immobilized with and without bioimprinting, none of which improved the activity. All modified lipases were tested for selective ethanolysis of fish oil to concentrate omega-3 polyunsaturated fatty acids (PUFA). None of the preparations, except the immobilized ones catalysed ethanolysis. Immobilized CRL-catalyzed ethanolysis giving 27% (v/v) ethyl esters (EE) in 48 h, of which 43 mol% was oleic acid but no PUFA was detected in the EE fraction. Fatty acid selectivity of CALA was significantly improved by immobilization combined with bioimprinting, resulting in 5.5-fold lower omega-3 PUFA in EE.