A conformational switch in vinculin drives formation and dynamics of a talin-vinculin complex at focal adhesions

Dynamic interactions between the cytoskeleton and integrins control cell adhesion, but regulatory mechanisms remain largely undefined. Here, we tested the extent to which the autoinhibitory head-tail interaction (HTI) in vinculin regulates formation and lifetime of the talin-vinculin complex, a proposed mediator of integrin-cytoskeleton bonds. In an ectopic recruitment assay, mutational reduction of HTI drove assembly of talin-vinculin complexes, whereas ectopic complexes did not form between talin and wild-type vinculin. Moreover, reduction of HTI altered the dynamic assembly of vinculin and talin in focal adhesions. Using fluorescence recovery after photobleaching, we show that the focal adhesion residency time of vinculin was enhanced up to 3-fold by HTI mutations. The slow dynamics of vinculin correlated with exposure of its cryptic talin-binding site, and a talin-binding site mutation rescued the dynamics of activated vinculin. Significantly, HTI-deficient vinculin inhibited the focal adhesion dynamics of talin, but not paxillin or alpha-actinin. These data show that talin conformation in cells permits vinculin binding, whereas the autoinhibited conformation of vinculin constitutes the barrier to complex formation. Down-regulation of HTI in vinculin to Kd approximately 10(-7) is sufficient to induce talin binding, and HTI is essential to the dynamics of vinculin and talin at focal adhesions. We therefore conclude that vinculin conformation, as modulated by the strength of HTI, directly regulates the formation and lifetime of talin-vinculin complexes in cells.     

Vinculin activation is necessary for complete talin binding

Focal adhesions are critical to a number of cellular processes that involve mechanotransduction and mechanical interaction with the cellular environment. The growth and strengthening of these focal adhesions is dependent on the interaction between talin and vinculin. This study investigates said interaction and how vinculin activation influences it. Using molecular dynamics, the interaction between talin's vinculin binding site (VBS) and vinculin's domain 1 (D1) is simulated both before and after vinculin activation. The simulations of VBS binding to vinculin before activation suggest the proximity of the vinculin tail to D1 prevents helical movement in D1 and thus prevents binding of VBS. In contrast, interaction of VBS with activated vinculin shows the possibility of complete VBS insertion into D1. In the simulations of both activated and autoinhibited vinculin where VBS fails to fully bind, VBS demonstrates significant hydrophobic interaction with surface residues in D1. These interactions link VBS to D1 even without its proper insertion into the hydrophobic core. Together these simulations suggest VBS binds to vinculin with the following mechanism: 1), VBS links to D1 via surface hydrophobic interactions; 2), vinculin undergoes activation and D1 is moved away from the vinculin tail; 3), helices in D1 undergo conformational change to allow VBS binding; and 4), VBS inserts itself into the hydrophobic core of D1.     

Structural dynamics of alpha-actinin-vinculin interactions

Alpha-actinin and vinculin orchestrate reorganization of the actin cytoskeleton following the formation of adhesion junctions. alpha-Actinin interacts with vinculin through the binding of an alpha-helix (alphaVBS) present within the R4 spectrin repeat of its central rod domain to vinculin's N-terminal seven-helical bundle domain (Vh1). The Vh1:alphaVBS structure suggests that alphaVBS first unravels from its buried location in the triple-helical R4 repeat to allow it to bind to vinculin. alphaVBS binding then induces novel conformational changes in the N-terminal helical bundle of Vh1, which disrupt its intramolecular association with vinculin's tail domain and which differ from the alterations in Vh1 provoked by the binding of talin. Surprisingly, alphaVBS binds to Vh1 in an inverted orientation compared to the binding of talin's VBSs to vinculin. Importantly, the binding of alphaVBS and talin's VBSs to vinculin's Vh1 domain appear to also trigger distinct conformational changes in full-length vinculin, opening up distant regions that are buried in the inactive molecule. The data suggest a model where vinculin's Vh1 domain acts as a molecular switch that undergoes distinct structural changes provoked by talin and alpha-actinin binding in focal adhesions versus adherens junctions, respectively.     

The Interaction of Vinculin with Actin

Vinculin can interact with F-actin both in recruitment of actin filaments to the growing focal adhesions and also in capping of actin filaments to regulate actin dynamics. Using molecular dynamics, both interactions are simulated using different vinculin conformations. Vinculin is simulated either with only its vinculin tail domain (Vt), with all residues in its closed conformation, with all residues in an open I conformation, and with all residues in an open II conformation. The open I conformation results from movement of domain 1 away from Vt; the open II conformation results from complete dissociation of Vt from the vinculin head domains. Simulation of vinculin binding along the actin filament showed that Vt alone can bind along the actin filaments, that vinculin in its closed conformation cannot bind along the actin filaments, and that vinculin in its open I conformation can bind along the actin filaments. The simulations confirm that movement of domain 1 away from Vt in formation of vinculin 1 is sufficient for allowing Vt to bind along the actin filament. Simulation of Vt capping actin filaments probe six possible bound structures and suggest that vinculin would cap actin filaments by interacting with both S1 and S3 of the barbed-end, using the surface of Vt normally occluded by D4 and nearby vinculin head domain residues. Simulation of D4 separation from Vt after D1 separation formed the open II conformation. Binding of open II vinculin to the barbed-end suggests this conformation allows for vinculin capping. Three binding sites on F-actin are suggested as regions that could link to vinculin. Vinculin is suggested to function as a variable switch at the focal adhesions. The conformation of vinculin and the precise F-actin binding conformation is dependent on the level of mechanical load on the focal adhesion.     

Polyphosphoinositides inhibit the interaction of vinculin with actin filaments.

Binding of vinculin to adhesion plaque proteins is restricted by an intramolecular association of vinculin's head and tail regions. Results of previous work suggest that polyphosphoinositides disrupt this interaction and thereby promote binding of vinculin to both talin and actin. However, data presented here show that phosphatidylinositol 4,5-bisphosphate (PI4,5P2) inhibits the interaction of purified tail domain with F-actin. Upon re-examining the effect of PI4,5P2 on the actin and talin-binding activities of intact vinculin, we find that when the experimental design controls for the effect of magnesium on aggregation of PI4,5P2 micelles, polyphosphoinositides promote interactions with the talin-binding domain, but block interactions of the actin-binding domain. In contrast, if vinculin is trapped in an open confirmation by a peptide specific for the talin-binding domain of vinculin, actin binding is allowed. These results demonstrate that activation of the actin-binding activity of vinculin requires steps other than or in addition to the binding of PI4,5P2.     

An asymmetric junctional mechanoresponse coordinates mitotic rounding with epithelial integrity

Epithelia are continuously self-renewed, but how epithelial integrity is maintained during the morphological changes that cells undergo in mitosis is not well understood. Here, we show that as epithelial cells round up when they enter mitosis, they exert tensile forces on neighboring cells. We find that mitotic cell–cell junctions withstand these tensile forces through the mechanosensitive recruitment of the actin-binding protein vinculin to cadherin-based adhesions. Surprisingly, vinculin that is recruited to mitotic junctions originates selectively from the neighbors of mitotic cells, resulting in an asymmetric composition of cadherin junctions. Inhibition of junctional vinculin recruitment in neighbors of mitotic cells results in junctional breakage and weakened epithelial barrier. Conversely, the absence of vinculin from the cadherin complex in mitotic cells is necessary to successfully undergo mitotic rounding. Our data thus identify an asymmetric mechanoresponse at cadherin adhesions during mitosis, which is essential to maintain epithelial integrity while at the same time enable the shape changes of mitotic cells.     

The relationship between force and focal complex development

To adhere and migrate, cells must be capable of applying cytoskeletal force to the extracellular matrix (ECM) through integrin receptors. However, it is unclear if connections between integrins and the ECM are immediately capable of transducing cytoskeletal contraction into migration force, or whether engagement of force transmission requires maturation of the adhesion. Here, we show that initial integrin-ECM adhesions become capable of exerting migration force with the recruitment of vinculin, a marker for focal complexes, which are precursors of focal adhesions. We are able to induce the development of focal complexes by the application of mechanical force to fibronectin receptors from inside or outside the cell, and we are able to extend focal complex formation to vitronectin receptors by the removal of c-Src. These results indicate that cells use mechanical force as a signal to strengthen initial integrin-ECM adhesions into focal complexes and regulate the amount of migration force applied to individual adhesions at localized regions of the advancing lamella.     

Talin tension sensor reveals novel features of focal adhesion force transmission and mechanosensitivity

Integrin-dependent adhesions are mechanosensitive structures in which talin mediates a linkage to actin filaments either directly or indirectly by recruiting vinculin. Here, we report the development and validation of a talin tension sensor. We find that talin in focal adhesions is under tension, which is higher in peripheral than central adhesions. Tension on talin is increased by vinculin and depends mainly on actin-binding site 2 (ABS2) within the middle of the rod domain, rather than ABS3 at the far C terminus. Unlike vinculin, talin is under lower tension on soft substrates. The difference between central and peripheral adhesions requires ABS3 but not vinculin or ABS2. However, differential stiffness sensing by talin requires ABS2 but not vinculin or ABS3. These results indicate that central versus peripheral adhesions must be organized and regulated differently, and that ABS2 and ABS3 have distinct functions in spatial variations and stiffness sensing. Overall, these results shed new light on talin function and constrain models for cellular mechanosensing.     

Vinculin binding in its closed conformation by a helix addition mechanism

Vinculin links integrin receptors to the actin cytoskeleton by binding to talin. Vinculin is held in an inactive, closed-clamp conformation through hydrophobic interactions between its head and tail domains, and vinculin activation has long been thought to be dependent upon severing the head-tail interaction. Talin, alpha-actinin, and the invasin IpaA of Shigella flexneri sever vinculin's head-tail interaction by inserting an alpha-helix into vinculin's N-terminal four-helical bundle, provoking extensive conformational changes by a helical bundle conversion mechanism; these alterations in vinculin structure displace its tail domain, allowing vinculin to bind to its other partners. IpaA harbors two juxtaposed alpha-helical vinculin-binding sites (VBS) in its C-terminus. Here, we report that the lower affinity VBS of IpaA can also bind to the adjacent C-terminal four-helical bundle of vinculin's head domain through a helix addition mechanism. These hydrophobic interactions do not alter the conformation of this helical bundle, and the architecture of the complex suggests that IpaA can simultaneously interact with both of the four-helical bundle domains of vinculin's N-terminus to stabilize vinculin-IpaA interactions.     

The structure and regulation of vinculin

Vinculin is a ubiquitously expressed actin-binding protein frequently used as a marker for both cell-cell and cell-extracellular matrix (focal adhesion) adherens-type junctions, but its function has remained elusive. Vinculin is made up of a globular head linked to a tail domain by a short proline-rich sequence, and an intramolecular interaction between the head and tail masks the numerous ligand-binding sites in the protein. Determination of the crystal structure of vinculin has shed new light on the way that these ligand-binding sites are regulated. The picture that emerges is one in which vinculin stabilizes focal adhesions and thereby suppresses cell migration, an effect that is relieved by transient changes in the local concentrations of inositol phospholipids. However, the finding that vinculin modulates the signalling pathways involved in apoptosis suggests that additional roles for vinculin remain to be discovered.     

Three-dimensional structure of vinculin bound to actin filaments

Vinculin plays a pivotal role in cell adhesion and migration by providing the link between the actin cytoskeleton and the transmembrane receptors, integrin and cadherin. We used a combination of electron microscopy, computational docking, and biochemistry to provide an atomic model of how the vinculin tail binds actin filaments. The vinculin tail actin binding site comprises two distinct regions. One of these regions is exposed in the full-length autoinhibited conformation of vinculin, whereas the second site is sterically occluded by vinculin's N-terminal domain. The partial accessibility of the F-actin binding site in the autoinhibited full-length vinculin structure suggests that F-actin can act as part of a combinatorial input framework with other binding partners such as alpha-catenin or talin to induce vinculin head-tail dissociation, thus promoting vinculin activation. Furthermore, binding to F-actin potentiates a local rearrangement in the vinculin tail that in turn promotes vinculin dimerization and, hence, formation of actin bundles.     

ARF1 Mediates Paxillin Recruitment to Focal Adhesions and Potentiates Rho-stimulated Stress Fiber Formation in Intact and Permeabilized Swiss 3T3 Fibroblasts

Focal adhesion assembly and actin stress fiber formation were studied in serum-starved Swiss 3T3 fibroblasts permeabilized with streptolysin-O. Permeabilization in the presence of GTPγS stimulated rho-dependent formation of stress fibers, and the redistribution of vinculin and paxillin from a perinuclear location to focal adhesions. Addition of GTPγS at 8 min after permeabilization still induced paxillin recruitment to focal adhesion–like structures at the ends of stress fibers, but vinculin remained in the perinuclear region, indicating that the distributions of these two proteins are regulated by different mechanisms. Paxillin recruitment was largely rho-independent, but could be evoked using constitutively active Q71L ADP-ribosylation factor (ARF1), and blocked by NH₂-terminally truncated Δ17ARF1. Moreover, leakage of endogenous ARF from cells was coincident with loss of GTPγS- induced redistribution of paxillin to focal adhesions, and the response was recovered by addition of ARF1. The ability of ARF1 to regulate paxillin recruitment to focal adhesions was confirmed by microinjection of Q71LARF1 and Δ17ARF1 into intact cells. Interestingly, these experiments showed that V14RhoA- induced assembly of actin stress fibers was potentiated by Q71LARF1. We conclude that rho and ARF1 activate complimentary pathways that together lead to the formation of paxillin-rich focal adhesions at the ends of prominent actin stress fibers.     

A Molecular Dynamics Investigation of Vinculin Activation

Vinculin activation plays a critical role in focal adhesion initiation and formation. In its native state, vinculin is in an autoinhibitory conformation in which domain 1 prevents interaction of the vinculin tail domain with actin by steric hindrance. Once activated, vinculin is able to interact with both actin and talin. Several hypotheses have been put forth addressing the mechanisms of vinculin activation. One set of studies suggests that vinculin interaction with talin is sufficient to cause activation, whereas another set of studies suggests that a simultaneous interaction with several binding partners is necessary to achieve vinculin activation. Using molecular-dynamics (MD) simulations, we investigate the mechanisms of vinculin activation and suggest both a trajectory of conformational changes leading to vinculin activation, and key structural features that are likely involved in stabilizing the autoinhibited conformation. Assuming that the simultaneous interaction of vinculin with both actin and talin causes a stretching force on vinculin, and that vinculin activation results from a removal of steric hindrance blocking the actin-binding sites, we simulate with MD the stretching and activation of vinculin. The MD simulations are further confirmed by normal-mode analysis and simulation after residue modification. Taken together, the results of these simulations suggest that bending of the vinculin-binding-site region in vinculin away from the vinculin tail is the likely trajectory of vinculin activation.     

Tyrosine phosphorylation and cytoskeletal tension regulate the release of fibroblast adhesions

We have investigated the mechanisms by which fibroblasts release their adhesions to the extracellular matrix substrata using a permeabilized cell system in which the adhesions remain relatively stable. A large number of different molecules were assayed for their effect on focal adhesion stability using immunofluorescence with antibodies against different focal adhesion constituents. ATP uniquely stimulates a rapid breakdown of focal adhesions, and at high ATP concentrations (> 5 mM), many cells are released from the dish. The remaining cells appear contracted with talin, alpha-actinin, and vinculin localized diffusely throughout the cell. Integrin containing tracks of variable intensity outline the regions where cells had resided before they detached from the substratum. At lower ATP concentrations (0.5-5 mM) the cells remain spread; however the focal adhesion components, including integrin, show an array of phenotypes ranging from diffusely localized throughout the cell to a localization in small, thin focal adhesions. Okadaic acid, a serine, threonine phosphatase inhibitor, enhances the contracted phenotype, even at low concentrations (0.5 mM) of ATP. The localization of focal adhesion components is different in okadaic acid-treated cells. In highly contracted cells, integrin is present in tracks where the cells resided before the contraction; however focal adhesions are no longer apparent. Talin, vinculin, and alpha-actinin localize in trabecular networks toward the periphery of the cell. Interestingly, phosphotyrosine staining as well as nascent, intracellular integrin precedes the recruitment of focal adhesion constituents into the trabecular network. The ATP-stimulated focal adhesion breakdown appears to operate through two mechanisms. First, ATP stimulates the tyrosine phosphorylation of several cytoskeletally associated proteins. These tyrosine phosphorylations correlated well with focal adhesion breakdown. Furthermore, addition of a recombinant, constitutively active tyrosine phosphatase inhibits both the tyrosine phosphorylations and the breakdown of the focal adhesions. None of the major tyrosine phosphoproteins are FAK, integrin, tensin, paxillin, or other phosphoproteins implicated in focal adhesion assembly. The second mechanism is cell contraction. High ATP concentrations, or lower ATP concentrations in the presence of okadaic acid induce cell contraction. Inhibiting the contraction by addition of a heptapeptide IRICRKG, which blocks the actin-myosin interaction, also inhibits focal adhesion breakdown. Neither the peptide nor the phosphatase inhibits focal adhesion breakdown under all conditions suggesting that both tension and tyrosine phosphorylations mediate the release of adhesions.     

Identification of LIM3 as the principal determinant of paxillin focal adhesion localization and characterization of a novel motif on paxillin directing vinculin and focal adhesion kinase binding

Paxillin is a 68-kD focal adhesion phosphoprotein that interacts with several proteins including members of the src family of tyrosine kinases, the transforming protein v-crk, and the cytoskeletal proteins vinculin and the tyrosine kinase, focal adhesion kinase (FAK). This suggests a function for paxillin as a molecular adaptor, responsible for the recruitment of structural and signaling molecules to focal adhesions. The current study defines the vinculin- and FAK-interaction domains on paxillin and identifies the principal paxillin focal adhesion targeting motif. Using truncation and deletion mutagenesis, we have localized the vinculin-binding site on paxillin to a contiguous stretch of 21 amino acids spanning residues 143-164. In contrast, maximal binding of FAK to paxillin requires, in addition to the region of paxillin spanning amino acids 143-164, a carboxyl-terminal domain encompassing residues 265-313. These data demonstrate the presence of a single binding site for vinculin, and at least two binding sites for FAK that are separated by an intervening stretch of 100 amino acids. Vinculin- and FAK-binding activities within amino acids 143-164 were separable since mutation of amino acid 151 from a negatively charged glutamic acid to the uncharged polar residue glutamine (E151Q) reduced binding of vinculin to paxillin by >90%, with no reduction in the binding capacity for FAK. The requirement for focal adhesion targeting of the vinculin- and FAK-binding regions within paxillin was determined by transfection into CHO.K1 fibroblasts. Significantly and surprisingly, paxillin constructs containing both deletion and point mutations that abrogate binding of FAK and/or vinculin were found to target effectively to focal adhesions. Additionally, expression of the amino-terminal 313 amino acids of paxillin containing intact vinculin- and FAK-binding domains failed to target to focal adhesions. This indicated other regions of paxillin were functioning as focal adhesion localization motifs. The carboxyl-terminal half of paxillin (amino acids 313-559) contains four contiguous double zinc finger LIM domains. Transfection analyses of sequential carboxyl-terminal truncations of the four individual LIM motifs and site-directed mutagenesis of LIM domains 1, 2, and 3, as well as deletion mutagenesis, revealed that the principal mechanism of targeting paxillin to focal adhesions is through LIM3. These data demonstrate that paxillin localizes to focal adhesions independent of interactions with vinculin and/or FAK, and represents the first definitive demonstration of LIM domains functioning as a primary determinant of protein subcellular localization to focal adhesions.     

PREL1 provides a link from Ras signalling to the actin cytoskeleton via Ena/VASP proteins

Ena/VASP family proteins are important modulators of cell migration and localize to focal adhesions, stress fibres and the very tips of lamellipodia and filopodia. Proline-rich proteins like vinculin and zyxin are well established interaction partners, which mediate Ena/VASP-recruitment via their EVH1-domains to focal adhesions and stress fibres. However, it is still unclear, which binding partners Ena/VASP proteins may have at lamellipodia tips and how their recruitment to these cellular protrusions is regulated. Here, we report the identification of a novel protein with high similarity to the C. elegans MIG-10 protein, which we termed PREL1 (Proline Rich EVH1 Ligand). PREL1 is a 74 kDa protein and shares homology with the Grb7-family of signalling adaptors. We show that PREL1 directly binds to Ena/VASP proteins and co-localizes with them at lamellipodia tips and at focal adhesions in response to Ras activation. Moreover, PREL1 directly binds to activated Ras in a phosphoinositide-dependent manner. Thus, our data pinpoint PREL1 as the first direct link between Ras signalling and cytoskeletal remodelling via Ena/VASP proteins during cell migration and spreading.     

PREL1 provides a link from Ras signalling to the actin cytoskeleton via Ena/VASP proteins

Ena/VASP family proteins are important modulators of cell migration and localize to focal adhesions, stress fibres and the very tips of lamellipodia and filopodia. Proline-rich proteins like vinculin and zyxin are well established interaction partners, which mediate Ena/VASP-recruitment via their EVH1-domains to focal adhesions and stress fibres. However, it is still unclear, which binding partners Ena/VASP proteins may have at lamellipodia tips and how their recruitment to these cellular protrusions is regulated. Here, we report the identification of a novel protein with high similarity to the C. elegans MIG-10 protein, which we termed PREL1 (Proline Rich EVH1 Ligand). PREL1 is a 74 kDa protein and shares homology with the Grb7-family of signalling adaptors. We show that PREL1 directly binds to Ena/VASP proteins and co-localizes with them at lamellipodia tips and at focal adhesions in response to Ras activation. Moreover, PREL1 directly binds to activated Ras in a phosphoinositide-dependent manner. Thus, our data pinpoint PREL1 as the first direct link between Ras signalling and cytoskeletal remodelling via Ena/VASP proteins during cell migration and spreading.     

Shigella applies molecular mimicry to subvert vinculin and invade host cells

Shigella flexneri, the causative agent of bacillary dysentery, injects invasin proteins through a type III secretion apparatus upon contacting the host cell, which triggers pathogen internalization. The invasin IpaA is essential for S. flexneri pathogenesis and binds to the cytoskeletal protein vinculin to facilitate host cell entry. We report that IpaA harbors two vinculin-binding sites (VBSs) within its C-terminal domain that bind to and activate vinculin in a mutually exclusive fashion. Only the highest affinity C-terminal IpaA VBS is necessary for efficient entry and cell-cell spread of S. flexneri, whereas the lower affinity VBS appears to contribute to vinculin recruitment at entry foci of the pathogen. Finally, the crystal structures of vinculin in complex with the VBSs of IpaA reveal the mechanism by which IpaA subverts vinculin's functions, where S. flexneri utilizes a remarkable level of molecular mimicry of the talin-vinculin interaction to activate vinculin. Mimicry of vinculin's interactions may therefore be a general mechanism applied by pathogens to infect the host cell.     

Dissecting focal adhesions in cells differentially expressing calreticulin: a microscopy study

Background information. Our previous studies have shown that calreticulin, a Ca²⁺‐binding chaperone located in the endoplasmic reticulum, affects cell—substratum adhesions via the induction of vinculin and N‐cadherin. Cells overexpressing calreticulin contain more vinculin than low expressers and make abundant contacts with the substratum. However, cells that express low levels of calreticulin exhibit a weak adhesive phenotype and make few, if any, focal adhesions. To date, the identity of the types of focal adhesions made by calreticulin overexpressing and low expressing cells has not been dissected. Results. The results of the present study show that calreticulin affects fibronectin matrix assembly in L fibroblast cell lines that differentially express the protein, and that these cells also differ profoundly in focal adhesion formation. Although the calreticulin overexpressing cells generate numerous interference‐reflection‐microscopy‐dark, vinculin‐ and paxillin‐containing classical focal contacts, as well as some fibrillar adhesions, the cells expressing low levels of calreticulin generate only a few weak focal adhesions. The fibronectin receptor was found to be clustered in calreticulin overexpressing cells, but diffusely distributed over the cell surface in low expressing cells. Plating L fibroblasts on fibronectin‐coated substrata induced extensive spreading in all cell lines tested. However, although calreticulin overexpressing cells were induced to form classical vinculin‐rich focal contacts, the low calreticulin expressing cells overcame their weak adhesive phenotype by induction of many tensin‐rich fibrillar adhesions, thus compensating for the low level of vinculin in these cells. Conclusions. We propose that calreticulin affects fibronectin production and, thereby, assembly, and it indirectly influences the formation and/or stability of focal contacts and fibrillar adhesions, both of which are instrumental in matrix assembly and remodelling.     

Migration of F9 parietal endoderm cells is regulated by the ERK pathway

Cell migration is regulated by the action of many signaling pathways that are activated in specific regions of migrating cells. Extracellular regulated kinase 1/2 (ERK) signaling can modulate the migration of cells by controlling the turnover of focal adhesions and the dynamics of actin polymerization. Focal adhesion turnover is necessary for cell migration, and the formation of strong actin stress fibers and mature focal adhesions puts the brakes on cell migration. We used F9 wild-type and vinculin null (vin-/-) parietal endoderm (PE) outgrowth to study the role of the ERK signaling pathway in cell migration. Upon plating of F9 embryoid bodies (EBs) onto laminin-coated dishes, PE cells migrate away from the EBs, providing an in vitro model for studying directed migration of this embryonic cell type. Our results suggest that the ERK pathway regulates PE cell migration by affecting the formation of focal adhesions and lamellipodia through the action of myosin light chain kinase (MLCK).