High-density polymerase-mediated incorporation of fluorochrome-labeled nucleotides

DNA-polymerase-mediated incorporation of different fluorochrome-labeled nucleotides (FdNTPs) was investigated with the goals of optimizing the high-density labeling of probes and exploring DNA sequencing strategies that rely on the controlled, sequential addition of such compounds. By systematically evaluating variables--including polymerase type, buffer conditions, and fluorochrome chemistries--a rational strategy for the sequential addition of labeled nucleotides to a DNA template was demonstrated. A simple structural model of the polymerase-DNA template complex that considered the fluorochrome moiety of the FdNTPs and the linker length also guided this strategy. Complementary results that portend the use of simple photobleaching to enable the reliable quantitation of consecutive additions are presented.     

Consecutive incorporation of fluorophore-labeled nucleotides by mammalian DNA polymerase β

In the present study, we investigated mammalian polymerases that consecutively incorporate various fluorophore-labeled nucleotides. We found that rat DNA polymerase β (pol β) consecutively incorporated fluorophore-labeled nucleotides to a greater extent than four bacterial polymerases, Sequenase Version 2.0, Vent_R (exo-), DNA polymerase IIIα and the Klenow fragment, and the mammalian polymerases DNA polymerase α and human DNA polymerase δ, under mesophilic conditions. Furthermore, we investigated the kinetics of correct or mismatched incorporation with labeled nucleotides during synthesis by rat pol β. The kinetic parameters K_m and k_cat were measured and used for evaluating: (i) the discrimination against correct pair incorporation of labeled nucleotides relative to unlabeled nucleotides; and (ii) the fidelity for all nucleotide combinations of mismatched pairs in the presence of labeled or unlabeled nucleotides. We also investigated the effect of fluorophore-labeled nucleotides on terminal deoxynucleotidyl transferase activity of rat pol β. We have demonstrated for the first time that mammalian pol β can consecutively incorporate various fluorophore-labeled dNTPs. These findings suggest that pol β is useful for high-density labeling of DNA probes and single-molecule sequencing for high-speed genome analysis.     

DNA sequencing by synthesis with degenerate primers

The degenerate primer-based sequencing Was developed by a synthesis method(DP-SBS)for high-throughput DNA sequencing,in which a set of degenerate primers are hybridized on the arrayed DNA templates and extended by DNA polymerase on microarrays.In this method,adifferent set of degenerate primers containing a give nnumber(n)of degenerate nucleotides at the 3'-ends were annealed to the sequenced templates that were immobilized on the solid surface.The nucleotides(n 1)on the template sequences were determined by detecting the incorporation of fluorescent labeled nucleotides.The fluorescent labeled nucleotide was incorporated into the primer in a base-specific manner after the enzymatic primer extension reactions and nine-base length were read out accurately.The main advanmge of the DP-SBS is that the method only uses very conventional biochemical reagents and avoids the complicated special chemical reagents for removing the labeled nucleotides and reactivating the primer for further extension.From the present study,it is found that the DP-SBS method is reliable,simple,and cost-effective for laboratory-sequencing a large amount of short DNA fragments.     

Progress towards single-molecule DNA sequencing: a one color demonstration

Single molecules of fluorescently labeled nucleotides were detected during the cleavage of individual DNA fragments by a processive exonuclease. In these experiments, multiple (10-100) strands of DNA with tetramethyl rhodamine labeled dUMP (TMR-dUMP) incorporated into the sequence were anchored in flow upstream of the detection region of an ultra sensitive flow cytometer. A dilute solution of Exonuclease I passed over the microspheres. When an exonuclease attached to a strand, processive digestion of that strand began. The liberated, labeled bases flowed through the detection region and were detected at high efficiency at the single-molecule level by laser-induced fluorescence. The digestion of a single strand of DNA by a single exonuclease was discernable in these experiments. This result demonstrates the feasibility of single-molecule DNA sequencing. In addition, these experiments point to a new and practical means of arriving at a consensus sequence by individually reading out identical sequences on multiple fragments.     

Label-free DNA sequencing using Millikan detection

A label-free method for DNA sequencing based on the principle of the Millikan oil drop experiment was developed. This sequencing-by-synthesis approach sensed increases in bead charge as nucleotides were added by a polymerase to DNA templates attached to beads. The balance between an electrical force, which was dependent on the number of nucleotide charges on a bead, and opposing hydrodynamic drag and restoring tether forces resulted in a bead velocity that was a function of the number of nucleotides attached to the bead. The velocity of beads tethered via a polymer to a microfluidic channel and subjected to an oscillating electric field was measured using dark-field microscopy and used to determine how many nucleotides were incorporated during each sequencing-by-synthesis cycle. Increases in bead velocity of approximately 1% were reliably detected during DNA polymerization, allowing for sequencing of short DNA templates. The method could lead to a low-cost, high-throughput sequencing platform that could enable routine sequencing in medical applications.     

Long,Processive Enzymatic DNA Synthesis Using 100% Dye-Labeled Terminal Phosphate-Linked Nucleotides

We demonstrate the efficient synthesis of DNA with complete replacement of the four deoxyribonucleoside triphosphate (dNTP) substrates with nucleotides carrying fluorescent labels. A different, spectrally separable fluorescent dye suitable for single molecule fluorescence detection was conjugated to each of the four dNTPs via linkage to the terminal phosphate. Using these modified nucleotides, DNA synthesis by φ29 DNA polymerase was observed to be processive for products thousands of bases in length, with labeled nucleotide affinities and DNA polymerization rates approaching unmodified dNTP levels. Results presented here show the compatibility of these nucleotides for single-molecule, real-time DNA sequencing applications.     

T4 DNA polymerase: Rates and processivity on single-stranded DNA templates

Three different methods have been used to determine the rate at which an individual bacteriophage T4 DNA polymerase molecule moves when synthesizing DNA on a single-stranded DNA template chain. These methods agree in suggesting an in vitro rate for this enzyme of about 250 nucleotides per second at 37 °C. This rate is close to the rate at which bacteriophage T4 replication forks move in vivo (about 500 nucleotides per second). Comparison with the overall amount of DNA synthesis seen in in vitro reactions reveals that only a small fraction of the T4 DNA polymerase molecules present are synthesizing DNA at any one time. This is explicable in terms of the limited processivity of the enzyme in these reactions, along with its capacity for non-productive DNA binding to the DNA template molecules.     

Long, processive enzymatic DNA synthesis using 100% dye-labeled terminal phosphate-linked nucleotides

We demonstrate the efficient synthesis of DNA with complete replacement of the four deoxyribonucleoside triphosphate (dNTP) substrates with nucleotides carrying fluorescent labels. A different, spectrally separable fluorescent dye suitable for single molecule fluorescence detection was conjugated to each of the four dNTPs via linkage to the terminal phosphate. Using these modified nucleotides, DNA synthesis by phi 29 DNA polymerase was observed to be processive for products thousands of bases in length, with labeled nucleotide affinities and DNA polymerization rates approaching unmodified dNTP levels. Results presented here show the compatibility of these nucleotides for single-molecule, real-time DNA sequencing applications.     

Structure of an intermediate in the replication of bacteriophage φX174 deoxyribonucleic acid: The initiation site for DNA replication

Replicative form DNA composed of a closed complementary strand and a discontinuous viral strand has been isolated from cells infected with bacteriophage φX174 during the period of single-strand DNA synthesis. This RFII DNA was degraded by the restriction enzyme from Hemophilus influenzae, endonuclease R, and the products analyzed by polyacrylamide gel electrophoresis. The results indicate that there are two types of discontinuity in the viral strands of these molecules: (1) 65% of the molecules contain a gap, which causes a discrete increase in mobility of a specific restriction enzyme fragment, R3. This gap can be selectively repaired with Escherichia coli DNA polymerase I and nucleoside triphosphates, but the molecules are not converted to RFI by addition of E. coli polynueleotide ligase to the reaction mixture. Approximately 30 moles of radioactive TTP are incorporated per mole of RF DNA. (2) 35% of the RF molecules contain a discontinuity, which does not result in a detectable change in mobility of any restriction enzyme fragment. These RF molecules can be converted to RFI by the action of ligase and polymerase I in the presence of nucleoside triphosphates, with incorporation of only approximately one mole of radioactive TTP, specifically into fragment R3, per mole of RF DNA.When the reaction of late RFII DNA and polymerase I is allowed to proceed beyond the repair of the discontinuity, radioactive nucleotides are incorporated into endonuclease R fragments adjacent to R3 in the 5′ → 3′ direction. This technique was utilized to determine a partial order of endonuclease R fragments in φX174.These results suggest that the synthesis of single-strand DNA is initiated from a unique point in cistron A and proceeds clockwise round the φX174 genetic map (cistron order: ABCDEFGH). A comparison of these results with other studies on φX174 suggests that DNA synthesis in all stages of φX174 replication may be initiated from a specific locus on the genome, at or near cistron A.     

DNA sequencing with direct blotting electrophoresis.

A method for transferring the DNA molecules of sequencing reaction mixtures onto an immobilizing matrix during electrophoresis has been developed. A blotting membrane moves with constant speed across the end of a very short, denaturing gel and collects the molecules according to size. A constant distance between bands for molecules differing in length by one nucleotide is obtained over a large range (approximately 600 nucleotides with a 5% gel), simplifying the determination of DNA sequences considerably. Reliable sequences of 500 nucleotides can be read and sequence features up to greater than 1000 nucleotides are revealed in a single experiment. The sequencing of a potential Z-DNA-forming fragment from Escherichia coli DNA is given as an example and possible further developments are discussed.     

A simple procedure for parallel sequence analysis of both strands of 5'-labeled DNA

Ligation of a 5'-labeled DNA restriction fragment results in a circular DNA molecule carrying the two 32Ps at the reformed restriction site. Double digestions of the circular DNA with the original enzyme and a second restriction enzyme cleavage near the labeled site allows direct chemical sequencing of one 5'-labeled DNA strand. Similar double digestions, using an isoschizomer that cleaves differently at the 32P-labeled site, allows direct sequencing of the now 3'-labeled complementary DNA strand. It is possible to directly sequence both strands of cloned DNA inserts by using the above protocol and a multiple cloning site vector that provides the necessary restriction sites. The simultaneous and parallel visualization of both DNA strands eliminates sequence ambiguities. In addition, the labeled circular molecules are particularly useful for single-hit DNA cleavage studies and DNA footprint analysis. As an example, we show here an analysis of the micrococcal nuclease-induced breaks on the two strands of the somatic 5S RNA gene of Xenopus borealis, which suggests that the enzyme may recognize and cleave small AT-containing palindromes along the DNA helix.     

Multiple structures of adeno-associated virus DNA: analysis of terminally labeled molecules with endonuclease R-Hae III.

The double-stranded form of adeno-associated virus (AAV) DNA has about 20 sites sensitive to endonuclease R.Hae III from Haemophilus aegypitus; the fragments produced fall into about 13 size classes, 8 of which contain single fragments. The location of the Hae III-produced AAV fragments relative to the three EcoR1 fragments was determined. Using revised figures for the molecular weights of the Hae III cleavage products of phiX174 replicative form DNA, we calculated that AAV DNA contains about 4,000 nucleotides. After Hae III digestiion of duplex DNA terminally labeled with 32P using polynucleotide kinase, the majority of fragments containing a 5' 32P label were about 40 nucleotides in length, and fragments of similar size were generated from each end, suggesting that the Hae site closest to the end is within the terminal repetition. Two more-slowly-migrating cleavage products also bore 5' 32P end label. These three terminally labeled species were also generated from single-stranded AAV DNA by digestion with Hae III, and evidence that one may have a nonlinear ("rabbit-ear") structure is presented. The predominant 5' terminal base was identified as thymine for both the plus and minus strands of AAV. Single-stranded AAV molecules could not be efficiently covalently circularized by incubation with polynucleotide ligase or ligase plus T4 DNA polymerase.     

Improvements in Pyrosequencing technology by employing Sequenase polymerase

Pyrosequencing is a DNA sequencing technique based on the bioluminometric detection of inorganic pyrophosphate, which is released when nucleotides are incorporated into a target DNA. Since the technique is based on an enzymatic cascade, the choice of enzymes is a critical factor for efficient performance of the sequencing reaction. In this study we have analyzed the performance of an alternative DNA polymerase, Sequenase, on the sequencing performance of the Pyrosequencing technology. Compared to the Klenow fragment of DNA polymerase I, Sequenase could read through homopolymeric regions with more than five T bases. In addition, Sequenase reduces remarkably interference from primer-dimers and loop structures that give rise to false sequence signals. By using Sequenase, synchronized extensions and longer reads can be obtained on challenging templates, thereby opening new avenues for applications of Pyrosequencing technology.     

Synthesis of Novel Tyrosinyl FRET Cassettes,Terminators, and Their Potential Use in DNA Sequencing

Abstract

Fluorescence resonance energy transfer (FRET) dye labeled cassettes and terminators with one or more donor dyes (fluorescein) and acceptor dye (rhodamine dyes) with benzofuran or tyrosine linker moieties were synthesized. These terminators were evaluated for their energy transfer and DNA sequencing potential using thermostable DNA polymerase.     

Single molecule linear analysis of DNA in nano-channel labeled with sequence specific fluorescent probes

An array of nano-channels was fabricated from silicon based semiconductor materials to stretch long, native dsDNA. Here we present a labeling scheme in which it is possible to identify the location of specific sequences along the stretched DNA molecules. The scheme proceeds by first using the strand displacement activity of the Vent (exo-) polymerase to generate single strand flaps on nicked dsDNA. These single strand flaps are hybridized with sequence specific fluorophore-labeled probes. Subsequent imaging of the DNA molecules inside a nano-channel array device allows for quantitative identification of the location of probes. The highly efficient DNA hybridization on the ss-DNA flaps is an excellent method to identify the sequence motifs of dsDNA as it gives us unique ability to control the length of the probe sequence and thus the frequency of hybridization sites on the DNA. We have also shown that this technique can be extended to a multi color labeling scheme by using different dye labeled probes or by combining with a DNA- polymerase-mediated incorporation of fluorophore-labeled nucleotides on nicking sites. Thus this labeling chemistry in conjunction with the nano-channel platform can be a powerful tool to solve complex structural variations in DNA which is of importance for both research and clinical diagnostics of genetic diseases.     

Automated forward and reverse ratcheting of DNA in a nanopore at 5-Å precision

An emerging DNA sequencing technique uses protein or solid-state pores to analyze individual strands as they are driven in single-file order past a nanoscale sensor. However, uncontrolled electrophoresis of DNA through these nanopores is too fast for accurate base reads. Here, we describe forward and reverse ratcheting of DNA templates through the α-hemolysin nanopore controlled by phi29 DNA polymerase without the need for active voltage control. DNA strands were ratcheted through the pore at median rates of 2.5-40 nucleotides per second and were examined at one nucleotide spatial precision in real time. Up to 500 molecules were processed at ～130 molecules per hour through one pore. The probability of a registry error (an insertion or deletion) at individual positions during one pass along the template strand ranged from 10% to 24.5% without optimization. This strategy facilitates multiple reads of individual strands and is transferable to other nanopore devices for implementation of DNA sequence analysis.