Synthesis of chitosan networks: Swelling, drug release, and magnetically assisted BSA separation using Fe(3)O(4) nanoparticles

Chitosan (CS) nanohydrogel networks were prepared by reaction with glyceroldiglycidylether (GDE) and poly(dimethylsiloxane) (PDMS), as crosslinking agents in an emulsion system. The nanogel content increased with increasing the amount of crosslinkers and reached to a maximum of 90% with GDE. The nanogels structure was characterized by FT-IR, AFM, DSC, and TGA. The average size for CS-GDE and CS-PDMS particles were 59nm and 180nm, respectively. The swelling behavior of nanohydrogels was observed to be dependent on pH, temperature, degree of crosslinking, and on the chemical structure of crosslinker. The equilibrium water content of CS-GDE nanohydrogels reached to a maximum of 600% at neutral pH, and decreased at high and low pH and low temperature. These nanohydrogels were tested for sodium diclofenac (SDF) loading and releasing efficiency. The covalent conjugation of bovine serum albumin (BSA) and magnetic Fe(3)O(4) nanoparticles on the hydrogels were found to hold a potential application in magnetically assisted bioseparation.     

Noncovalent Immobilization of Streptavidin on In Vitro- and In Vivo-Biotinylated Bacterial Magnetic Particles

Biotinylated magnetic nanoparticles were constructed by displaying biotin acceptor peptide (BAP) or biotin carboxyl carrier protein (BCCP) on the surface of bacterial magnetic particles (BacMPs) synthesized by Magnetospirillum magneticum AMB-1. BAP-displaying BacMPs (BAP-BacMPs) were extracted from bacterial cells and incubated with biotin and Escherichia coli biotin ligase. Then the in vitro biotinylation of BAP-BacMPs was confirmed using alkaline phosphatase-labeled antibiotin antibody. In contrast, BacMPs displaying the intact 149 residues of AMB-1 BCCP (BCCP-BacMPs) and displaying the COOH-terminal 78 residues of BCCP (BCCP78-BacMPs) were biotinylated in AMB-1 cells. The in vivo biotinylation of BCCP-BacMPs and BCCP78-BacMPs was thought to be performed by endogenous AMB-1 biotin ligase. Streptavidin was introduced onto biotinylated BacMPs by simple mixing. In an analysis using tetramethyl rhodamine isocyanate-labeled streptavidin, approximately 15 streptavidin molecules were shown to be immobilized on a single BCCP-BacMP. Furthermore, gold nanoparticle-BacMP composites were constructed via the biotin-streptavidin interaction. The conjugation system developed in this work provides a simple, low-cost method for producing biotin- or streptavidin-labeled magnetic nanoparticles. Various functional materials can be site selectively immobilized on these specially designed BacMPs. By combining the site-selective biotinylation technology and the protein display technology, more innovative and attractive magnetic nanomaterials can be constructed.     

Bioconjugation of papain on superparamagnetic nanoparticles decorated with carboxymethylated chitosan

Functionalized Fe3O4 nanoparticles decorated with carboxymethylated chitosan were developed and used as a novel magnetic support for the covalent conjugation of papain, one of the most important industrial proteases. The analyses of transmission electron micrographs (TEM) and X-ray diffraction (XRD) showed that the size and structure of functionalized Fe3O4 nanoparticles had no significant changes after conjugation with papain. Magnetic measurement revealed that the resultant papain-conjugated nanoparticles were superparamagnetic with a saturation magnetization of 59.3 emu/g. Analyses of Fourier transform infrared (FTIR) spectroscopy and measurement of zeta potentials confirmed the conjugation of papain with the functionalized Fe3O4 nanoparticles. Compared with the native papain, the conjugated papain was found to exhibit enhanced enzyme activity, better tolerance to the variations of medium pH and temperature, and improved storage stability as well as good reusability. Considering that the magnetic separation technique possesses the advantages of rapidity, high efficiency, cost-effectiveness, and lack of negative effect on biological activity, such a bioconjugate system may hold potential applications in food, pharmaceutical, leather, cosmetic, and textile industries.     

Interaction of a flavone loaded on surface-modified dextran-spooled superparamagnetic nanoparticles with β-cyclodextrin and DNA

Flavones are biologically active compounds obtained mainly from plant sources. Pharmaceutically important compounds can be delivered to the physiological target by loading them in carriers like cyclodextrins and magnetic nanoparticles. Herein, the binding of 6-methoxyflavone to β-cyclodextrin and DNA is studied using UV–visible absorption and fluorescence spectroscopy. The loading of 6-methoxyflavone onto a magnetic nanoparticles is employed. β-cyclodextrin encapsulates the 6-methoxyflavone to form an inclusion complex. β-cyclodextrin also used to draw forth 6-methoxyflavone loaded onto a magnetic nanoparticles. The morphology, magnetic property and the crystallite size of the nanoparticles are studied using scanning electron microscopy, vibrating sample magnetometry and X-ray diffraction techniques, respectively. The binding of the drug-loaded magnetic nanoparticles to DNA shows that the compound is accessible to DNA and available mostly on the surface of the nanoparticles despite a modified dextan polymer supposedly encapsulates the flavone.     

Ag/SiO2 core-shell nanoparticle-based surface-enhanced Raman probes for immunoassay of cancer marker using silica-coated magnetic nanoparticles as separation tools

A simple, sensitive and highly specific immunoassay has been developed based on surface-enhanced Raman scattering for human alpha-fetoprotein (AFP), a tumor marker for the diagnosis of hepatocellular carcinoma. This strategy combines the Ag/SiO2 core-shell nanoparticles embedded with rhodamine B isothiocyanate dye molecules as Raman tags and the amino group modified silica-coated magnetic nanoparticle as immobilization matrix and separation tool. In the proposed system, a sandwich-type immunoassay was performed between polyclonal antibody functionalized Ag/SiO2 nanoparticle-based Raman tags and monoclonal antibody modified silica-coated magnetic nanoparticles. The presence of the analyte and the reaction between the antigen and antibody can be monitored by the Raman spectra of the Ag/SiO2 tags. Compared to the previous surface-enhanced Raman immunoassays, the main advantage of this strategy lies in two aspects. One is the high stability of Raman tags derived from the silica shell-coated silver core-shell nanostructure. The other is the use of silica-coated magnetic nanoparticles as immobilization matrix and separation tool, thus avoiding complicated pretreatment and washing steps. We have studied in detail the experimental parameters such as the effects of the antibody concentration modified on the Raman tags and on the magnetic particles, and the immunoreaction time. Using this strategy, concentration of human AFP up to 0.12 microg/ml was detected with a detection limit of 11.5 pg/ml.     

Biogenic synthesis and photocatalysis of Pd-PdO nanoclusters reinforced hierarchical TiO2 films with interwoven and tubular conformations

Hierarchical nanocomposite films with Pd-PdO nanoparticles anchored uniformly on the inner surface of TiO2 nanotubes were achieved through a stepwise bioredox/artificial oxygenation approach by using the natural eggshell membrane (ESM) as a template. The Pd content ratio of Pd-PdO loading could be arbitrarily varied from 0 to 53 wt %, and the ESM-morphic nanocomposites Pd-PdO/TiO2 exhibited porous and multiphasic features, facilitating light transport and molecule accessibility to the active site during photocatalytic reactions. The photocatalytic activity of target nanocomposites was determined by the degradation of rhodamine B. The composites with a ratio of 10 wt % TiO2 (5 wt % Pd of Pd-PdO loading) presented a high degradation efficiency of 99.3% and showed good stability with a second run of about 95.3% and a third run of 94.6%. These composites with structural particularity and complexity are expected to find potential applications in various fields, such as photovoltaic devices, gas sensors, antistatic coating, dye-sensitized solar cells, etc.     

Ratiometric fluorescent detection of Cu2+ based on dual‐emission ZIF‐8@rhodamine‐B nanocomposites

Zeolitic imidazolate framework‐8 (ZIF‐8) loading rhodamine‐B (ZIF‐8@rhodamine‐B) nanocomposites was proposed and used as ratiometric fluorescent sensor to detect copper(II) ion (Cu²⁺). Scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray powder diffraction, nitrogen adsorption/desorption isotherms and fluorescence emission spectroscopy were employed to characterize the ZIF‐8@rhodamine‐B nanocomposites. The results showed the rhodamine‐B was successfully assembled on ZIF‐8 based on the π‐π interaction and the hydrogen bond between the nitrogen atom of ZIF‐8 and –COOH of rhodamine‐B. The as‐obtained ZIF‐8@rhodamine‐B nanocomposites were octahedron with size about 150–200 nm, had good water dispersion, and exhibited the characteristic fluorescence emission of ZIF‐8 at 335 nm and rhodamine‐B at 575 nm. The Cu²⁺ could quench fluorescence of ZIF‐8 rather than rhodamine‐B. The ZIF‐8 not only acted as the template to assemble rhodamine‐B, but also was employed as the signal fluorescence together with the fluorescence of rhodamine‐B as the reference to construct a novel ratiometric fluorescent sensor to detect Cu²⁺. The resulted ZIF‐8@rhodamine‐B nanocomposite fluorescence probe showed good linear range (68.4 nM to 125 μM) with a low detection limit (22.8 nM) for Cu²⁺ combined with good sensitivity and selectivity. The work also provides a better way to design ratiometric fluorescent sensors from ZIF‐8 and other fluorescent molecules.     

Adsorption of bovin serum albumin (BSA) onto the magnetic chitosan nanoparticles prepared by a microemulsion system

The adsorption characteristics of BSA onto the magnetic chitosan nanoparticles have been investigated in this paper. The magnetic chitosan nanoparticles were prepared by adding the basic precipitant of NaOH solution into a W/O microemulsion system. The morphology of magnetic chitosan nanoparticles was observed by transmission electron microscope (TEM). It was found that the diameter of magnetic chitosan nanoparticles was from 10nm to 20 nm, and the nanoparticles suspending in the aqueous solution could easily aggregate by a magnet, which suggested that the nanoparticles had good magnetic characteristics. The BSA adsorption experiment indicated that when pH of BSA solution was equal to 4, the maximum adsorption loading reached 110 mg/g. Through measuring the zeta potential of BSA solution and the magnetic nanoparticles, it was found that under this situation the surface of BSA took the negative charge, but the magnetic nanoparticles took the positive charge. Due to the small diameter, the adsorption equilibrium of BSA onto the nanoparticles reached very quickly within 10 min. The adsorption equilibrium of BSA onto the magnetic chitosan nanoparticles fitted well with the Freundlich model. The experimental results showed that the magnetic chitosan nanoparticles have potential to be used for the quick pretreatment in the protein analysis process.     

Amino-functionalized cellulose nanoparticles: preparation, characterization, and interactions with living cells

Spherical nanoparticles with sizes from 80 to 200 nm are obtained by self-assembly of highly functionalized 6-deoxy-6-(ω-aminoalkyl)aminocellulosecarbamates. The particles are very stable, nontoxic, and possess primary amino groups that are accessible to further modifications in aqueous suspension. The particles can be labeled with rhodamine B isothiocyanate without changing their size, stability, and shape. The nanoparticles obtained are investigated by means of photo correlation spectroscopy, zeta potential measurements, SEM and fluorescence spectroscopy. Incorporation of the nanoparticles in human foreskin fibroblasts BJ-1-htert and breast carcinoma MCF-7 cells without any transfection reagent is proved by means of confocal laser scanning microscopy.     

In vitro and in vivo accumulation of magnetic nanoporous silica nanoparticles on implant materials with different magnetic properties

Background

In orthopedic surgery, implant-associated infections are still a major problem. For the improvement of the selective therapy in the infection area, magnetic nanoparticles as drug carriers are promising when used in combination with magnetizable implants and an externally applied magnetic field. These implants principally increase the strength of the magnetic field resulting in an enhanced accumulation of the drug loaded particles in the target area and therewith a reduction of the needed amount and the risk of undesirable side effects. In the present study magnetic nanoporous silica core–shell nanoparticles, modified with fluorophores (fluorescein isothiocyanate/FITC or rhodamine B isothiocyanate/RITC) and poly(ethylene glycol) (PEG), were used in combination with metallic plates of different magnetic properties and with a magnetic field. In vitro and in vivo experiments were performed to investigate particle accumulation and retention and their biocompatibility.

Results

Spherical magnetic silica core–shell nanoparticles with reproducible superparamagnetic behavior and high porosity were synthesized. Based on in vitro proliferation and viability tests the modification with organic fluorophores and PEG led to highly biocompatible fluorescent particles, and good dispersibility. In a circular tube system martensitic steel 1.4112 showed superior accumulation and retention of the magnetic particles in comparison to ferritic steel 1.4521 and a Ti90Al6V4 control. In vivo tests in a mouse model where the nanoparticles were injected subcutaneously showed the good biocompatibility of the magnetic silica nanoparticles and their accumulation on the surface of a metallic plate, which had been implanted before, and in the surrounding tissue.

Conclusion

With their superparamagnetic properties and their high porosity, multifunctional magnetic nanoporous silica nanoparticles are ideal candidates as drug carriers. In combination with their good biocompatibility in vitro, they have ideal properties for an implant directed magnetic drug targeting. Missing adverse clinical and histological effects proved the good biocompatibility in vivo. Accumulation and retention of the nanoparticles could be influenced by the magnetic properties of the implanted plates; a remanent martensitic steel plate significantly improved both values in vitro. Therefore, the use of magnetizable implant materials in combination with the magnetic nanoparticles has promising potential for the selective treatment of implant-associated infections.

     

Erythrocyte reagents for detecting antibodies to species-specific staphylococcal antigens

Antigenic species-specifics (S. aureus and S. epidermidis) erythrocyte diagnosticums have been obtained with the use of different loading methods. The cross reaction of passive hemagglutination with homologous and heterologous sera have demonstrated that conjugation with amidole ensures the maximum effectiveness and species specificity of diagnosticums in comparison with other conjugation methods.     

Chitosan nanoparticles targeted to the tumor-associated ganglioside GD2

Methodological approaches to the creation of nanoparticles based on chitosan derivatives and targeted to the GD2-positive tumor cells were developed. The GD2-specific monoclonal antibodies and their Fab-fragments and scFv-fragments were obtained and studied as vector molecules. Various methods for covalent conjugation of these molecules to the nanoparticles were also studied. It was shown that site-specific conjugation of scFv-fragments of GD2-specific antibodies to the chitosan nanoparticles by using a reagent BMPS is the optimal approach to create targeted chitosan-based nanoparticles directed to tumor-associated ganglioside GD2.     

The Identification and Purification of Pyronin and Rhodamine Dyes

The purity of 27 commercial pyronin and rhodamine samples was studied by thin-layer chromatography and visible spectroscopy. Seven different red dyes were detected and separated. The chemical identities of 6 of these were established by nuclear magnetic resonance spectroscopy. The identities of samples sold as rhodamine B and rhodamine 6G were as labelled 8 out of 9 times, the pyronin (G)Y samples were as labelled 5 out of 8 times and the 10 samples sold as acridine red, pyronin B, rhodamine 36 and rhodamine S were always incorrectly labelled. The dextrin and salt contents of the dyes were determined by solvent extraction of the dye with dry methanol or ethanol. Amounts of dextrin and salt varied from none to nearly 90%. Practical methods for identification, separation of coloured components and removal of dextrin and salt are given.     

In vivo antitumour activity of amphiphilic silicon(IV) phthalocyanine with axially ligated rhodamine B

We explore the possible cellular cytotoxic activity of an amphiphilic silicon(IV) phthalocyanine with axially ligated rhodamine B under ambient light experimental environment as well as its in vivo antitumour potential using Hep3B hepatoma cell model. After loading into the Hep3B hepatoma cells, induction of cellular cytotoxicity and cell cycle arrest were detected. Strong growth inhibition of tumour xenograft together with significant tumour necrosis and limited toxicological effects exerted on the nude mice could be identified.     

ANTICANCER MEDICINES (DOXORUBICIN AND METHOTREXATE) CONJUGATED WITH MAGNETIC NANOPARTICLES FOR TARGETING DRUG DELIVERY THROUGH IRON

The uptake of iron is increased by cancer cells. Iron magnetic nanoparticles (MNP) can be used as a nanovehicle for immobilization of anticancer medicines and to integrate them at a target site. The anticancer medicines doxorubicin (DOX) and methotrexate (MTX) were immobilized separately and in combination onto MNP by a glutaraldehyde activation method and confirmed by magnetic nanoparticles linked immunosorbent assay (MagLISA) and Fourier-transform infrared (FTIR) spectroscopy. The phenol peaks of DOX and MTX at 2896.6 cm^?1 to 2912.5 cm^?1 in FTIR spectra of immobilized medicines indicated the conjugation. Affinity-purified anti-DOX and anti-MTX antibodies were used to evaluate the coupling of DOX and MTX onto MNP, and the binding was found 34.6% to 37.2% and 51.8% to 54.3% separately, respectively. The immobilization of DOX and MTX in combination onto MNP was 18% and 27%, respectively. HeLa and B cells were cultured with DOX-MNP, MTX-MNP, and DOX-MNP-MTX separately, and MagLISA indicated that the binding of DOX-MNP/MTX-MNP was 41.5% to 45% with HeLa cells and 20% to 26% with B cells. No significant difference was observed in binding of DOX-MNP-MTX with HeLa and B cells. Results also indicated that the release of medicines at pH 5.0 is more (39% to 44%) than at pH 7.4 (3.7% to 10.2%). Sixteen to 22% more killing effect was observed on HeLa cells than on B cells. In immunohistochemical staining, more deposition of brown color on HeLa cells than on B cells may be due to more expression of iron-binding sites on cancer cells. The dual property of MNP can be used for binding of medicines and for targeting drug delivery.     

"Clickable", trifunctional magnetite nanoparticles and their chemoselective biofunctionalization

A multifunctional iron oxide based nanoformulation for combined cancer-targeted therapy and multimodal imaging has been meticulously designed and synthesized using a chemoselective ligation approach. Novel superparamagnetic magnetite nanoparticles simultaneously functionalized with amine, carboxyl, and azide groups were fabricated through a sequence of stoichiometrically controllable partial succinylation and Cu (II) catalyzed diazo transfer on the reactive amine termini of 2-aminoethylphosphonate grafted magnetite nanoparticles (MNPs). Functional moieties associated with MNP surface were chemoselectively conjugated with rhodamine B isothiocyanate (RITC), propargyl folate (FA), and paclitaxel (PTX) via tandem nucleophic addition of amine to isothithiocyanates, Cu (I) catalyzed azide--alkyne click chemistry and carbodiimide-promoted esterification. An extensive in vitro study established that the bioactives chemoselectively appended to the magnetite core bequeathed multifunctionality to the nanoparticles without any loss of activity of the functional molecules. Multifunctional nanoparticles, developed in the course of the study, could selectively target and induce apoptosis to folate-receptor (FR) overexpressing cancer cells with enhanced efficacy as compared to the free drug. In addition, the dual optical and magnetic properties of the synthesized nanoparticles aided in the real-time tracking of their intracellular pathways also as apoptotic events through dual fluorescence and MR-based imaging.     

Label-free electrochemical immunosensor for the determination of fetoprotein based on core-shell-shell nanocomposite particles

A new approach toward the development of advanced immunosensors based on chemically functionalized core-shell-shell magnetic nanocomposite particles, and the preparation, characteristics, and measurement of relevant properties of the immunosensor useful for the detection of alpha-1-fetoprotein (AFP) in clinical immunoassays. The core-shell NiFe2O4/3-aminopropyltriethoxysilance (APTES) (NiFe2O4@APTES) was initially prepared by covalent conjugation, then gold nanoparticles were adsorbed onto the surface of NiFe2O4@APTES, and then anti-AFP molecules were conjugated on the gold nanoparticles. The core-shell-shell nanocomposite particles not only had the properties of magnetic nanoparticles, but also provided a good biocompatibility for the immobilization of biomolecules. The core-shell-shell nanostructure present good magnetic properties to facilitate and modulate the way it was integrated into a carbon paste. The analytical performance of the immunosensor was investigated by using an electrochemical method. Under optimal conditions, the resulting composite presents good electrochemical response for the detection of AFP, and exhibits wide linear range from 0.9 to 110 ng/mL AFP with a detection limit of 0.5 ng/mL. Moreover, the proposed immunosensors were used to analyze AFP in human serum specimens. Analytical results, obtained for the clinical serum specimen by the developed immunosensor, were in accordance with those assayed by the standard ELISA. Importantly, the proposed immunoassay system could be further developed for the immobilization of other antigens or biocompounds.     

Polyaniline-assisted silver nanoparticles: a novel support for the immobilization of α-amylase

The size distribution of nanomaterials and their similarity in size with enzyme molecules together with other advantageous properties such as thermal stability, high surface-to-volume ratio, and irradiation resistance have revolutionized nanobiocatalytic approaches in various areas of enzyme technology. In the present study, polyaniline-assisted Ag nanocomposites were synthesized using ammonium peroxydisulfate as oxidant. These nanocomposites were used as a support for the covalent conjugation of α-amylase, one of the important industrial enzymes. X-ray diffraction study showed that the crystalline nature of nanocomposites was increased in the presence of Ag nanoparticles. Thermogravimetric and differential thermal analysis revealed that the synthesized nanocomposites retained significantly very high thermal stability. Scanning electron micrograph showed that Ag nanoparticles were homogeneously dispersed in polyaniline film providing large surface area and microenvironment for enzyme loading. Fourier transform infrared spectroscopy confirmed the conjugation of α-amylase to the functionalized nanocomposites. The conjugated α-amylase exhibited better tolerance to variations in the medium pH and temperature compared with the native enzyme. Immobilized α-amylase hydrolyzes starch more efficiently as compared to the free enzyme in batch process.     

Accumulation of magnetic nanoparticles in plants grown on soils of Apsheron peninsula

The disclosure of magnetic nanoparticles in five plant species growing in Apsheron peninsula have been detected by the EPR method. The EPR spectra of these nanoparticles proved to be similar to those of synthesized magnetic nanoparticles. The result demonstrated that plants are capable of absorbing magnetic nanoparticles from the soil. The accumulation of nanoparticles in plants is confirmed by the presence of a broad EPR signal whose maximum position of the low-field component changes from g = 2.38 and halfwidth of the signal of 32 mT at room temperature to g = 2.71 and 50-55 mT at 80 K. The intensity of the broad EPR signal for plants grown in radioactively contaminated areas (170-220 mkR per h) was substantially lower compared with plants grown on clean soil. The parameters of the broad EPR signal and its dependence on the temperature of recording were identical with those for synthetic magnetic nanoparticles. The photosynthetic activity and changes in the genome of irradiated plants by the analysis of PCR products were studied.