Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

A selective determination of copper ions in water samples based on the fluorescence quenching of thiol‐capped CdTe quantum dots

CdTe quantum dots (QDs) capped with different stabilizers, i.e. thioglycolic acid (TGA), 3‐mercaptopropionic acid (MPA) and glutathione (GSH) were investigated as fluorescent probes for the determination of Cu²⁺. The stabilizer was shown to play an important role in both the sensitivity and selectivity for the determination of Cu²⁺. TGA‐capped CdTe QDs showed the highest sensitivity, followed by the MPA and GSH‐capped CdTe QDs, respectively. The TGA‐ and MPA‐capped CdTe QDs were not selective for Cu²⁺ that was affected by Ag⁺. The GSH‐capped CdTe QDs were insensitive to Ag⁺ and were used to determine Cu²⁺ in water samples. Under optimal conditions, quenching of the fluorescence intensity (F₀/F) increased linearly with the concentration of Cu²⁺ over a range of 0.10–4.0 µg/mL and the detection limit was 0.06 µg/mL. The developed method was successfully applied to the determination of Cu²⁺ in water samples. Good recoveries of 93–104%, with a relative standard deviation of < 6% demonstrated that the developed simple method was accurate and reliable. The quenching mechanisms were also described. Copyright © 2015 John Wiley & Sons, Ltd.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of the interaction of a mono‐6‐thio‐β‐cyclodextrin‐capped CdTe quantum dots–methylene blue/methylene green system with herring sperm DNA using a spectroscopic approach

Novel, water‐soluble CdTe quantum dots (QDs) capped with β‐cyclodextrin (β‐CD) and ~ 4.0 nm in diameter were synthesized in aqueous solution, and characterized using transmission electron microscopy (TEM). A fluorescence‐sensing system based on the photoinduced electron transfer (PET) of (mono‐6‐thio‐β‐CD)–CdTe QDs was then designed to measure the interaction of phenothiazine dyes [methylene blue (MB) and methylene green (MG)] with herring sperm DNA (hsDNA). This fluorescence‐sensing system was based on a fluorescence “OFF–ON” mode. First, MB/MG adsorbed on the surface of (mono‐6‐thio‐β‐CD)–CdTe QDs effectively quenches the fluorescence of (mono‐6‐thio‐β‐CD)–CdTe QDs through PET. Then, addition of hsDNA restores the fluorescence intensity of (mono‐6‐thio‐β‐CD)–CdTe QDs, because hsDNA can bind with MB/MG and remove it from the as‐prepared (mono‐6‐thio‐β‐CD)–CdTe QDs. In addition, detailed reaction mechanisms of the (mono‐6‐thio‐β‐CD)–CdTe QDs–MB/MG–hsDNA solution system were studied using optical methods, by comparison with the TGA–CdTe QDs–MB/MG–hsDNA solution system. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of highly luminescent and biocompatible CdTe/CdS/ZnS quantum dots using microwave irradiation: a comparative study of different ligands

We compared the effects of several ligands frequently used in aqueous synthesis, including L‐cysteine, L‐cysteine hydrochloride, N‐acetyl‐L‐cysteine (NAC), glutathione and 3‐mercaptopropionic acid, for microwave synthesis of CdTe quantum dots (QDs) in a sealed vessel with varied temperatures and times, and then developed a rapid microwave‐assisted protocol for preparing highly luminescent, photostable and biocompatible CdTe/CdS/ZnS core–multishell QDs. The effects of molecular structures of these ligands on QD synthesis under high temperatures were explored. Among these ligands, NAC was found to be the optimal ligand in terms of the optical properties of resultant QDs and reaction conditions. The emission wavelength of NAC‐capped CdTe QDs could reach 700 nm in 5 min by controlling the reaction temperature, and the resultant CdTe/CdS/ZnS core–multishell QDs could achieve the highest quantum yields up to 74% with robust photostability. In addition, the effects of temperature, growth time and shell–precursor ratio on shell growth were examined. Finally, cell culturing indicated the low cytotoxicity of CdTe/CdS/ZnS core–multishell QDs as compared to CdTe and CdTe/CdS QDs, suggesting their high potential for applications in biomedical imaging and diagnostics. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive detection of sodium cromoglycate with glutathione‐capped CdTe quantum dots as a novel fluorescence probe

A sensitive and simple analytical strategy for the detection of sodium cromoglycate (SCG) has been established based on a readily detectable fluorescence quenching effect of SCG for glutathione‐capped (GSH‐capped) CdTe quantum dots (QDs). The fluorescence of GSH‐capped CdTe QDs could be efficiently quenched by SCG through electron transfer from GSH‐capped CdTe QDs to SCG. Under optimum conditions, the response was linearly proportional to the concentration of SCG between 0.6419 and 100 µg/mL, with a correlation coefficient (R) of 0.9964; the detection limit (3δ/K) was 0.1926 µg/mL. The optimum conditions and the influence of coexisting foreign substances on the reaction were also investigated. The very effective and simple method reported here has been successfully applied to the determination of SCG in synthetic and real samples. It is believed that the established approach could have good prospects for application in the fields of clinical diseases diagnosis and treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence of the luminol–potassium periodate system enhanced by TGA–capped CdTe quantum dots for the determination of theophylline

The chemiluminescence (CL) behaviour of the luminol–potassium periodate system enhanced by CdTe quantum dots capped with thioglycolic acid (TGA–CdTe QDs) was studied using kinetic experiments, CL spectra, UV–vis absorption spectra and fluorescence spectra. The production of oxygen‐containing reactant intermediates (O₂^?? and OH^?) in the present CL system was verified by CL. The possible CL mechanism was discussed in detail. Furthermore, theophylline (THP) was determined based on its enhancement of the CL intensity of the CdTe QDs–luminol–potassium periodate system coupled with a flow‐injection technique. Under these optimized conditions, the linear range was found to be from 1.0 × 10^?8 to 1.0 × 10^?5 g/mL with a detection limit of 2.8 × 10^?9 g/mL (3σ). The recoveries for the determination of THP in tablets were from 98.2 to 99.6%.     

L‐Cysteine capped CdTe–CdS core–shell quantum dots: preparation,characterization and immuno‐labeling of HeLa cells

Functionalized CdTe–CdS core–shell quantum dots (QDs) were synthesized in aqueous solution via water‐bathing combined hydrothermal method using L‐cysteine (L‐Cys) as a stabilizer. This method possesses both the advantages of water‐bathing and hydrothermal methods for preparing high‐quality QDs with markedly reduced synthesis time, and better stability than a lone hydrothermal method. The QDs were characterized by transmission electronic microscopy and powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The CdTe–CdS QDs with core–shell structure showed both enhanced fluorescence and better photo stability than nude CdTe QDs. After conjugating with antibody rabbit anti‐CEACAM8 (CD67), the as‐prepared l ‐Cys capped CdTe–CdS QDs were successfully used as fluorescent probes for the direct immuno‐labeling and imaging of HeLa cells. It was indicated that this kind of QD would have application potential in bio‐labeling and cell imaging. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of the grafting on the fluorescence properties of CdTe nanocrystals

In this paper, we systematically investigated the influence of graft reagents having an amino or a carboxyl terminus with different chain lengths on the fluorescence properties of water‐soluble thioglycolic acid‐stabilized CdTe nanocrystals (TGA–CdTe). Strong enhancement effects of the grafting on the fluorescence intensity of TGA–CdTe were observed. The experiment results demonstrated that short‐chain‐length grafting can increase the fluorescence intensity of CdTe nanocrystals (NCs) better than long‐chain‐length grafting, and the grafting did not influence the emission wavelength of the CdTe NCs. The fluorescence intensity of the carboxyl‐grafted TGA–CdTe was more stable than that of the amino‐grafted TGA–CdTe at wide pH ranges (pH 5.1–10.0). Copyright © 2009 John Wiley & Sons, Ltd.     

Labeling of BSA and imaging of mouse T‐lymphocyte as well as mouse spleen tissue by l‐glutathione capped CdTe quantum dots

l ‐glutathione capped highly fluorescent CdTe quantum dots (QDs) were prepared by an aqueous approach and used as fluorescent labels to link albumin bovine serum (BSA) and rat anti‐mouse CD4, which was expressed on mouse T‐lymphocyte and mouse spleen tissue. The sharp and narrow emission peaks showed that the as‐prepared QDs have desirable dispersibility, uniformity and good fluorescence properties. Both CdTe–BSA and CdTe–CD4 conjugates showed an enhancement of fluorescence intensity over that of bare CdTe QDs. The experimental result of gel electrophoresis confirmed the successful conjugation of CdTe–BSA and CdTe–CD4. The fluorescent microscopic images of CdTe–CD4 labeled mouse T‐lymphocyte cells and mouse spleen tissue were compared with that obtained from fluorescein isothiocyanate labeling. It was demonstrated that the CdTe QDs‐based probe exhibited much better photostability and fluorescence intensity than fluorescein isothiocyanate, showing a good application potential in the immuno‐labeling of cells and tissues. Copyright © 2009 John Wiley & Sons, Ltd.     

Study on the fluorescence resonance energy transfer between CdS quantum dots and Eosin Y

Water‐soluble CdS quantum dots (QDs) were prepared using mercaptoacetic acid (TGA) as the stabilizer in an aqueous system. A fluorescence resonance energy transfer (FRET) system was constructed between water‐soluble CdS QDs (donor) and Eosin Y (acceptor). Several factors that impacted the fluorescence spectra of the FRET system, such as pH (3.05–10.10), concentration of Eosin Y (2–80 mg/L) and concentration of CdS QDs (2–80 mg/L), were investigated and refined. Donor‐to‐acceptor ratios, the energy transfer efficiency (E) and the distance (r) between CdS QDs and Eosin Y were obtained. The results showed that a FRET system could be established between water‐soluble CdS QDs and Eosin Y at pH 5.0; donor‐to‐acceptor ratios demonstrated a 1: 8 proportion of complexes; the energy transfer efficiency (E) and the distance (r) between the QDs and Eosin Y were 20.07% and 4.36 nm,respectively. Copyright © 2014 John Wiley & Sons, Ltd.     

Core–shell structured CdTe/CdS@SiO2@CdTe@SiO2 composite fluorescent spheres: Synthesis and application for Cd2+ detection

Core–shell structured quantum dot (QD)–silica fluorescent nanoparticles have attracted a great deal of attention due to the excellent optical properties of QDs and the stability of silica. In this study, core–shell structured CdTe/CdS@SiO₂@CdTe@SiO₂ fluorescent nanospheres were synthesized based on the Stöber method using multistep silica encapsulation. The second silica layer on the CdTe QDs maintained the optical stability of nanospheres and decreased adverse influences on the probe during subsequent processing. Red‐emissive CdTe/CdS QDs (630 nm) were used as a built‐in reference signal and green‐emissive CdTe QDs (550 nm) were used as a responding probe. The fluorescence of CdTe QDs was greatly quenched by added S^2?, owing to a S^2?‐induced change in the CdTe QDs surface state in the shell. Upon addition of Cd²⁺ to the S^2?‐quenched CdTe/CdS@SiO₂@CdTe@SiO₂ system, the responding signal at 550 nm was dramatically restored, whereas the emission at 630 nm remained almost unchanged; this response could be used as a ratiometric ‘off–on’ fluorescent probe for the detection of Cd²⁺. The sensing mechanism was suggested to be: the newly formed CdS‐like cluster with a higher band gap facilitated exciton/hole recombination and effectively enhanced the fluorescence of the CdTe QDs. The proposed probe shows a highly sensitive and selective response to Cd²⁺ and has potential application in the detection of Cd²⁺ in environmental or biological samples.     

Preparation of pH‐stimuli‐responsive PEG–TGA/TGH‐capped CdTe QDs and their application in cell labeling

A pH‐sensitive and double functional nanoprobe was designed and synthesized in a water‐soluble system using thioglycolic acid (TGA) and mercapto‐acetohydrazide (TGH) as the stabilizers. TGA is biocompatible because the carboxyl group is easily linked to biological macromolecules. At the same time, the hydrazide on TGH reacts with the aldehyde on poly(ethylene glycol) (PEG) and forms a hydrazone bond. The hydrazone bond ruptured at specific pH values and exhibited pH‐stimuli‐responsive characteristics. As an optical imaging probe, the PEG–TGA/TGH‐capped CdTe quantum dots (QDs) had high quality, with a fluorescence efficiency of 25–30%, and remained stable for at least five months. This pH‐responsive factor can be used for the effective release of CdTe QDs under the acidic interstitial extracellular environment of tumor cells. This allows the prepared pH‐stimuli‐responsive nanoprobes to show fluorescence signals for use in cancer cell imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile synthesis and photophysical characterization of luminescent CdTe quantum dots for Forster resonance energy transfer based immunosensing of staphylococcal enterotoxin B

Aqueous phase synthesis of CdTe quantum dots (QDs) with surface functionalization for bioconjugation remains the best approach for biosensing and bioimaging applications. We present a facile aqueous phase method to prepare CdTe QDs by adjusting precursor and ligand concentrations. CdTe QDs had photoluminescence quantum yield up to ≈33% with a narrow spectral distribution. The powder X‐ray diffraction profile elucidated characteristic broad peaks of zinc blende cubic CdTe nanoparticles with 2.5–3 nm average crystalline size having regular spherical morphology as revealed by transmission electron microscopy. Infra‐red spectroscopy confirmed disappearance of characteristic absorptions for –SH thiols inferring thiol coordinated CdTe nanoparticles. The effective molar concentration of 1 : 2.5 : 0.5 respectively for Cd²⁺/3‐mercaptopropionic acid/HTe^– at pH 9 ± 0.2 resulted in CdTe quantum dots of 2.2–3.06 nm having band gap in the range 2.74–2.26 eV respectively. Later, QD₅₂₃ and QD₆₀₁ were used for monitoring staphylococcal enterotoxin B (SEB; a bacterial superantigen responsible for food poisoning) using Forster resonance energy transfer based two QD fluorescence. QD₅₂₃ and QD₆₀₁ were bioconjugated to anti‐SEB IgY antibody and SEB respectively according to carbodiimide protocol. The mutual affinity between SEB and anti‐SEB antibody was relied upon to obtain efficient energy transfer between respective QDs resulting in fluorescence quenching of QD₅₂₃ and fluorescence enhancement of QD₆₀₁. Presence of SEB in the range 1–0.05 µg varied the rate of fluorescence quenching of QD₅₂₃, thereby demonstrating efficient use of QDs in the Forster resonance energy transfer based immunosensing method by engineering the QD size. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly luminescent CdTe/CdS/ZnO core/shell/shell quantum dots fabricated using an aqueous strategy

To create core/shell/shell quantum dots (QDs) with high stability against a harmful chemical environment, CdTe/CdS QDs were coated with a ZnO shell in an aqueous solution. An interfaced CdS layer sandwiched between a CdTe core and ZnO shell provided relaxation of the strain at the core/shell interface since lattice parameters of CdS are intermediate between those of CdTe and ZnO. The photoluminescence (PL) peak wavelength of the core/shell/shell QDs was shifted from 569 to 615 nm by adjusting the size of CdTe cores and thickness of CdS and ZnO shells, along with the highest PL quantum yield of the core/shell/shell QDs reaching 80%, which implies promising applications in the field of biomedical labeling. Due to the decrease of surface defects, it was observed that PL lifetimes significantly increased at room temperature as follows: 29.6 34.2, and 47.5 ns for CdTe (537 nm), CdTe/CdS (555 nm) and CdTe/CdS/ZnO (581 nm) QDs, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

The interaction of CuInS2/ZnS/TGA quantum dots with tyrosine kinase inhibitor and its application

The interactions between thioglycolic acid‐capped‐CuInS₂/ZnS quantum dots (CuInS₂/ZnS/TGA QDs) and tyrosine kinase inhibitor (TKI) were investigated using fluorescence, ultraviolet–visible spectrometry and Fourier transform infrared spectrometry. The results indicated that the fluorescence intensity of CuInS₂/ZnS/TGA could be quenched by imatinib, dasatinib, nilotinib, gefitinib and erlotinib, which hinted that CuInS₂/ZnS/TGA QDs could be used in the detection of TKI in active pharmaceutical ingredients (API). Calibration curves showed good linear correlation and low detection limits. The average recovery was between 98 and 102%. Moreover, the nature of the fluorescence quenching mechanism of CuInS₂/ZnS/TGA QDs by TKI was discussed. A ground state complex was formed by hydrogen bonding between the carboxyl group of CuInS₂/ZnS/TGA QDs and the amino group of TKI. This led to an increase in non‐radiative transition and fluorescence quenching of CuInS₂/ZnS/TGA QDs. Copyright © 2014 John Wiley & Sons, Ltd.     

Mercaptopropionic acid–capped CdTe quantum dots as fluorescence probe for the determination of salicylic acid in pharmaceutical products

Mercaptopropionic acid (MPA)–capped cadmium telluride (CdTe) quantum dot (QDs) fluorescent probes were synthesized in aqueous solution and used for the determination of salicylic acid. The interaction between the MPA–capped CdTe QDs and salicylic acid was studied using fluorescence spectroscopy and some parameters that could modify the fluorescence were investigated to optimize the measurements. Under optimum conditions, the quenched fluorescence intensity of MPA–capped CdTe QDs was linearly proportional to the concentration of salicylic acid in the range of 0.5–40 µg mL^–1 with a coefficient of determination of 0.998, and the limit of detection was 0.15 µg mL^–1. The method was successfully applied to the determination of salicylic acid in pharmaceutical products, and satisfactory results were obtained that were in agreement with both the high pressure liquid chromatography (HPLC) method and the claimed values. The recovery of the method was in the range 99 ± 3% to 105 ± 9%. The proposed method is simple, rapid, cost effective, highly sensitivity and eminently suitable for the quality control of pharmaceutical preparation. The possible mechanisms for the observed quenching reaction was also discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of N‐Acetyl‐L‐Cysteine‐Capped CdTe Quantum Dots on Bovine Serum Albumin and Bovine Hemoglobin: Isothermal Titration Calorimetry and Spectroscopic Investigations

The interactions of N‐acetyl‐L‐cysteine‐capped CdTe quantum dots (QDs) with bovine serum albumin (BSA) and bovine hemoglobin (BHb) were investigated by isothermal titration calorimetry (ITC), fluorescence, synchronous fluorescence, fluorescence lifetime, ultraviolet–visible absorption, and circular dichroism techniques. Fluorescence data of BSA–QDs and BHb–QDs revealed that the quenching was static in every system. While CdTe QDs changed the microenvironment of tryptophan in BHb, the microenvironment of BSA kept unchanged. Adding CdTe QDs affected the skeleton and secondary structure of the protein (BSA and BHb). The ITC results indicated that the interaction between the protein (BSA and BHb) and QDs‐612 was spontaneous and the predominant force was hydrophobic interaction. In addition, the binding constants were determined to be 1.19 × 10⁵ L mol^?1 (BSA–QDs) and 2.19 × 10⁵ L mol^?1 (BHb–QDs) at 298 K. From these results, we conclude that CdTe QDs have a larger impact on the structure of BHb than BSA.     

Determination of ethanol using permanganate–CdS quantum dot chemiluminescence system

A novel and highly sensitive chemiluminescence (CL) method for the determination of ethanol was developed based on the CdS quantum dots (QDs)–permanganate system. It was found that KMnO₄ could directly oxidize CdS QDs in acidic media resulting in relatively high CL emission. A possible mechanism was proposed for this reaction based on UV/Vis absorption, fluorescence and the generated CL emission spectra. However, it was observed that ethanol had a remarkable inhibition effect on this system. This effect was exploited in the determination of ethanol within the concentration range 12–300 µg/L, with detection at 4.3 µg/L. In order to evaluate the capability of presented method, it was satisfactorily utilized in the determination of alcohol in real samples. Copyright © 2014 John Wiley & Sons, Ltd.