Luminescence study and dosimetry approach of Ce on an α‐Sr2P2O7 phosphor synthesized by a high‐temperature combustion method

We report synthesis of a cerium‐activated strontium pyrophosphate (Sr₂P₂O₇) phosphor using a high‐temperature combustion method. Samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), photoluminescence (PL) and thermoluminescence (TL). The XRD pattern reveals that Sr₂P₂O₇ has an α‐phase with crystallization in the orthorhombic space group of Pnam. The IR spectrum of α‐Sr₂P₂O₇ displays characteristic bands at 746 and 1190 cm^‐1 corresponding to the absorption of (P₂O₇)^‐4. PL emission spectra exhibit a broad emission band around 376 nm in the near‐UV region due to the allowed 5d–4f transition of cerium and suggest its applications in a UV light‐emitting diode (LED) source. PL also reveals that the emission originates from 5d–4f transition of Ce³⁺ and intensity increases with doping concentration. TL measurements made after X‐ray irradiation, manifest a single intense glow peak at around 192°C, which suggests that this is an outstanding candidate for dosimetry applications. The kinetic parameters, activation energy and frequency factor of the glow curve were calculated using different analysis methods. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence investigation of CaY2Al4SiO12:Dy3+ phosphor synthesized by sol–gel method

Dy³⁺-doped CaY₂Al₄SiO₁₂ phosphors were prepared using the sol–gel method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and energy dispersive spectroscopy analyses (EDS) were used to analyse the crystal structure, morphology, and elemental composition of the prepared samples. The luminescence behaviour of the sample was investigated using photoluminescence (PL) and thermoluminescence (TL) techniques. The prepared CaY₂Al₄SiO₁₂:xDy³⁺ phosphor showed a characteristic blue and yellow emission at ~480 and 583 nm, respectively, with an excitation wavelength of 350 nm. The most intense PL emission was found for a 4 mol% doping concentration of Dy³⁺ ions. The CIE diagram of the phosphor showed bluish-white colour emission. For TL studies, the prepared phosphors were irradiated with a ⁶⁰Co γ (gamma) source and the TL glow curve of the CaY₂Al₄SiO₁₂:0.04Dy³⁺ phosphor showed three overlapped peaks. For the Gaussian peaks, Chen's peak shape method was applied to determine the kinetic parameters of the samples.     

Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and thermoluminescence characterizations of Sr2B5O9Cl:Dy3+ phosphor for TL dosimetry

The photoluminescence (PL) and thermoluminescence (TL) displayed by Dy‐activated strontium haloborate (Sr₂B₅O₉Cl) were studied. A modified solid‐state reaction was employed for the preparation of the phosphor. Photoluminescence spectra showed blue (484 nm) and yellow (575 nm) emissions due to incorporation of Dy³⁺ into host matrix. The Dy‐doped (0.5 mol%) Sr₂B₅O₉Cl was studied after exposure to γ‐irradiation and revealed a prominent glow curve at 261°C with a small hump around 143°C indicating that two types of traps were generated. The glow peak at the higher temperature side (261°C) was more stable than the lower temperature glow peak. The TL intensity was 1.17 times less than that of the standard CaSO₄:Dy thermoluminescence dosimetry (TLD) phosphor, the phosphor showed a linear dose–response curve for different γ‐ray irradiation doses (0.002–1.25 Gy) and fading of 5–7% was observed for higher temperature peaks upon storage. Trapping parameters and their estimated error values have been calculated by Chen's peak shape method and by the initial rise method. Values of activation energies estimated by both these techniques were comparable. The slight difference in activation energy values calculated by Chen's peak shape method indicated the formation of two kinds of traps Furthermore, slight differences in frequency values are due to various escaping and retrapping probabilities. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization and luminescence properties of CaMgSi2O6:Eu2+ blue phosphor

A blue CaMgSi₂O₆:Eu²⁺ phosphor was prepared by the solid‐state reaction method and the phosphor characterized in terms of crystal structure, particle size, photoluminescence (PL), thermoluminescence (TL) and mechanoluminescence (ML) properties using X‐ray diffraction (XRD), transmission electron microscopy (TEM), PL spectroscopy, TLD reader and ML impact technique. The XRD result shows that phosphor is formed in a single phase and has a monoclinic structure with the space group C2/c. Furthermore, the PL excitation spectra of Eu²⁺‐doped CaMgSi₂O₆ phosphor showed a strong band peak at 356 nm and the PL emission spectrum has a peak at 450 nm. The depths and frequency factors of trap centers were calculated using the TL glow curve by deconvolution method in which the trap depths were found to be 0.48 and 0.61 eV. The formation of CaMgSi₂O₆:Eu²⁺ phosphor was confirmed by Fourier transform infrared spectroscopy. The ML intensity increased linearly with the impact velocity of the piston used to deform the phosphor. It was shown that the local piezoelectricity‐induced electron bombardment model is responsible for the ML emission. Finally, the optical properties of CaMgSi₂O₆:Eu²⁺ phosphors are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Fracto‐mechanoluminescence and thermoluminescence properties of UV and γ‐irradiated Ca2Al2SiO7:Ce3+ phosphor

Ce³⁺‐doped calcium aluminosilicate phosphor was prepared by a combustion‐assisted method at an initiating temperature of 600°C. Structural characterization was carried out using X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The absorption spectra of Ca₂Al₂SiO₇:Ce³⁺ showed an absorption edge at 230 nm. The optical characterization of Ca₂Al₂SiO₇:Ce³⁺ phosphor was investigated in a fracto‐mechanoluminescence (FML) and thermoluminescence (TL) study. The peak of ML intensity increased as the height of impact of the moving piston increased. The TL intensity of Ca₂Al₂SiO₇:Ce³⁺ was recorded for different exposure times of UV and γ‐irradiation and it was observed that TL intensity was maximum for a UV irradiation time of 30 min and for a γ‐dose of 1180 Gy. The TL intensity had three peaks for UV irradiation at temperatures 82°C, 125°C and 203°C. Also the TL intensity had a single peak at 152°C for γ‐irradiation. The TL and ML emission spectra of Ca₂Al₂SiO₇:Ce³⁺ phosphor showed maximum emission at 400 nm. The possible mechanisms involved in the TL and ML processes of the Ca₂Al₂SiO₇:Ce³⁺ phosphor are also explained. Copyright © 2015 John Wiley & Sons, Ltd.     

Europium doped Sr2YNbO6 double perovskite phosphor for photoluminescence and thermoluminescence properties

A luminescent double perovskite phosphor Sr₂YNbO₆ doped with Eu³⁺ crystallized to the monoclinic phase and was synthesized successfully via a conventional high-temperature combustion method. The formation of the crystal structure, phase purity, and surface morphology were studied using X-ray diffraction patterns and scanning electron microscopy. The characteristic vibrations between the atoms of the functional groups present in phosphor were studied using Fourier transform infrared spectra analysis. The luminescence properties of the prepared phosphors were investigated in terms of photoluminescence (PL) and thermoluminescence (TL). PL excitation spectra exhibited charge transfer bands and the characteristic 4f⁶ transitions of Eu³⁺. A prominent PL emission was obtained for the phosphor doped with 4 mol% Eu³⁺ under the 396 nm excitation wavelength. PL emission quenching was observed for the higher doping concentrations due to a multipole–multipole interaction. A highly intense PL emission arose due to the hypersensitive ⁵D₀–⁷F₂ electric dipole transition of Eu³⁺ that dominated the emission spectra. The thermal stability of the phosphor was examined through temperature-dependent PL. The TL properties of the Sr₂YNbO₆ double perovskites irradiated with a ⁹⁰Sr beta source at different doses were measured. The double perovskite phosphors under study showed a linear dose–response with increasing beta dose, ranging from 1 Gy to 10 Gy. Trapping parameters of the TL glow curves were determined using Chen's peak shape method and computerized glow curve deconvolution (CGCD). CGCD fitting of the TL glow curves revealed that it was consisted of three major peaks and followed second-order kinetics. The estimated activation energies were determined using different methods and were comparable and significant.     

Luminescence characteristics of Na3Ca2(SO4)3F: Ce3+ fluoride material

A new Na₃Ca₂(SO₄)₃F: Ce³⁺ phosphor synthesized by a solid state diffusion method is reported. The photoluminescence study showed a single high intensity emission peak at 307 nm wavelength when excited by UV light of wavelength 278 nm. An unresolved peak of comparatively less intensity was also observed at 357 nm along with the main peak. The characteristic emission of dopant Ce in Na₃Ca₂(SO₄)₃F phosphor clearly indicated that it resides in the host lattice in trivalent form. The emission peak can be attributed to 5d → 4f transition of rare earth Ce³⁺. The prepared sample is also characterized for its thermoluminescence properties. The TL glow curve of prepared sample showed a single broad peak at 147°C. The trapping parameters are also evaluated by Chen's method. The values of trap depth (E) and frequency factor (s) were found to be 0.64 ± 0.002 eV and 1.43 × 10⁷ s^–1 respectively. The study of PL and TL along with evaluation of trapping parameters has been undertaken and discussed for the first time. Copyright © 2014 John Wiley & Sons, Ltd.     

Intensity enhancement of photoluminescence in Tb3+/Eu3+ co-doped Ca14Zn6Al10O35 phosphor for WLEDs

This article focuses on the effect of monovalent cation doping on the optical properties of rare earth (RE = Eu³⁺, Tb³⁺) co-doped Ca₁₄Zn₆Al₁₀O₃₅ which has been synthesized by a low temperature combustion method. Crystalline phase of the Ca₁₄Zn₆Al₁₀O₃₅ phosphor was examined and confirmed by X-ray diffraction measurement. Under near-ultraviolet light excitation Eu³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor exhibit characterization of Eu³⁺ emission bands that are located at a maximum wavelength (λ_max) of approximately 470 nm and other peaks centred at 593 nm and 615 nm, respectively. With Tb³⁺-doped Ca₁₄Zn₆Al₁₀O₃₅ phosphor showing a green emission band centred at 544 nm under near-ultraviolet range. Furthermore, we studied the energy transfer process in Eu³⁺/Tb³⁺pair and enhancement in photoluminescence (PL) intensity with doping different charge compensation. Here we obtained the optimum PL emission intensity of the phosphor in broad and intense visible spectral range which may be significant for the fabrication of white light emitting diodes (WLEDs).     

Luminescence studies on Al4B2O9:Eu2+ phosphor crystals

A novel blue‐emitting phosphor, Eu²⁺‐doping Al₄B₂O₉, was prepared via a modified solid‐state reaction. Al₄B₂O₉:Eu²⁺ nanoparticles with diameters varying in a range from 20 to 50 nm were obtained using urea as an auxiliary reagent at the optimum temperature of 850°C. The crystallization and particle sizes of Al₄B₂O₉:Eu²⁺ were investigated using powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence (PL) results showed that Al₄B₂O₉:Eu²⁺ phosphor could be efficiently excited by the ultraviolet region from 240 to 410 nm, exhibiting bright blue emission. Further investigation on concentration‐dependent emission spectra indicated that the Al_3.997B₂O₉:Eu²⁺_0.003 phosphor exhibited the strongest luminescent, and the relative PL intensity decreased with increasing Eu²⁺ concentration due to concentration quenching. In addition, the concentration quenching for the one‐Eu‐site emission centers was caused by the electric multipole–multipole interaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of a blue-emitting Sr(3.5) Y(6.5) O(2) (PO(4) )(1.5) (SiO(4) )(4.5) :Eu(2+) phosphor

A novel blue‐emitting Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:Eu²⁺ phosphor was synthesized via a solid‐state reaction. Powder X‐ray diffraction (XRD) analysis demonstrated that the Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5 host had a hexagonal crystal structure in the space group P6₃/m and unit cell parameters a = 9.418 Å, c = 6.900 Å. The as‐prepared phosphor showed a blue emission and all the main emission peaks were located at around 466 nm for different excitation wavelengths of 297, 333 and 391 nm. The temperature dependence of the photoluminescence property was investigated in the range 20–250 °C, and the emission intensity decreased to 71% of the initial value at room temperature on increasing the temperature to 150 °C. According to the classical theory of fluorescent thermal quenching, the activation energy (ΔE) for the thermal quenching luminescence of the as‐prepared Sr_3.45Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:0.05Eu²⁺ phosphor was determined to be 0.20 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Mechanoluminescence,thermoluminescence, photoluminescence studies on Ca3Y2Si3O12:RE3+ (RE3+ = Dy3+and Eu3+) phosphors

Dy³⁺ and Eu³⁺ activated Ca₃Y₂Si₃O₁₂ phosphors were synthesized by the solid‐state synthesis method. The phosphors were characterized by X‐ray diffraction (XRD), mechanoluminescence (ML), thermoluminescence (TL) and photoluminescence (PL) to determine structure and luminescence. For ML glow curves, only one peak was observed, as only one type of luminescence centre was formed during irradiation. The Ca₃Y₂Si₃O₁₂:Dy³⁺ TL glow curve showed a single peak at 151.55°C and the Ca₃Y₂Si₃O₁₂:Eu³⁺ TL glow curve peaked at 323°C with a small peak at 192°C, indicating that two types of traps were activated. The trapping parameters for both the samples were calculated using Chen's peak shape method. Dy³⁺‐activated Ca₃Y₂Si₃O₁₂ showed emission at 482 and 574 nm when excited by a 351 nm excitation wavelength, whereas the Eu³⁺‐activated Ca₃Y₂Si₃O₁₂ phosphor PL emission spectra showed emission peaks at 613 nm, 591 nm, 580 nm when excited at 395 nm wavelength. When excited at 466 nm, prominent emission peaks were observed at their respective positions with very slight shifts. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of nanocrystalline Mg2P2O7:Eu phosphor

Thermoluminescence (TL) measurements were carried out on europium (Eu) doped magnesium pyrophosphate (Mg₂P₂O₇) nanopowders using gamma irradiation in the dose range of 0.1 to 3 kGy. The powder samples were successfully synthesized by chemical co‐precipitation synthesis route. The formation and crystallinity of the compound was confirmed by powder X‐ray diffraction (PXRD) pattern. The estimated particle size was found to be in nanometer scale by using Debye Scherer's formula. A scanning electron microscopy (SEM) study was carried out for the morphological characteristics of as synthesized Mg₂P₂O₇:Eu phosphor. Photoluminescence (PL) study was carried out to confirm the presence of the rare‐earth ion and its valence state. The TL analysis of synthesized samples were performed after the irradiation of Mg₂P₂O₇:Eu with cobalt‐60 (⁶⁰Co) gamma rays. The high and low intensity peaks of TL glow curve appeared at around 400 K, 450 K, 500 K and 596 K respectively. The appreciable shift in peak positions has been observed for different concentrations of Eu ion. The trapping parameters, namely activation energy (E), order of kinetics (b) and frequency factor (s) have been determined using thermal cleaning process, peak shape (Chen's) method and glow curve deconvolution (GCD) functions.     

Evaluation of trapping parameters of γ‐rays irradiated Dy3+‐doped LaPO4 phosphors

Thermoluminescence (TL) materials are widely used in radiation measurements. The best‐known applications of TL materials are in the dosimetry of ionizing radiation, and in CTV screen phosphors, scintillators, X‐ray laser materials, etc. The TL glow curve and its kinetic parameters for annealed LaPO₄ at different constant temperatures and for Dy³⁺‐doped LaPO₄ phosphors irradiated by gamma‐rays are reported here. The samples were irradiated using a ⁶⁰Co gamma‐ray source at a dose of 10 Gy and the heating rate used for TL measurements was 5ºC/s. The samples were characterized using X‐ray diffraction (XRD), Fourier transform infrared, transmission electron microscopy and TL techniques. The XRD pattern shows that the prepared phosphor has a good crystalline structure with an average crystallite size of ~ 18 nm. The samples show good TL peaks for 0.05, 0.1 and 0.2 mole % doping concentrations of Dy³⁺ ions and anneal above 400ºC. The TL glow curve characteristics of annealed LaPO₄ and Dy³⁺‐doped LaPO₄ were analyzed and trapping parameters calculated using various methods. All TL glow curves obey the second‐order kinetics with a single glow peak, which reveals that only one set of trapping parameter is set for a particular temperature. The TL sensitivity was found to depend upon the annealing temperature and Dy³⁺ doping concentration. The prepared sample may be a new nano phosphor and be useful in TL dosimetry. Copyright © 2014 John Wiley & Sons, Ltd.     

Ca2Al2SiO7:Ce3+ phosphors for mechanoluminescence dosimetry

A series of Ce³⁺ ion single‐doped Ca₂Al₂SiO₇ phosphors was synthesized by a combustion‐assisted method at an initiating temperature of 600 °C. The samples were annealed at 1100 °C for 3 h and their X‐ray diffraction patterns confirmed a tetragonal structure. The phase structure, particle size, surface morphology and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) spectroscopy techniques. Thermoluminescence (TL) intensity increased with increase in ultraviolet (UV) light exposure time up to 15 min. With further increase in the UV irradiation time the TL intensity decreases. The increase in TL intensity indicates that trap concentration increased with UV exposure time. A broad peak at 121 °C suggested the existence of a trapping level. The peak of mechanoluminescence (ML) intensity versus time curve increased linearly with increasing impact velocity of the moving piston. Mechanoluminescence intensity increased with increase in UV irradiation time up to 15 min. Under UV‐irradiation excitation, the TL and ML emission spectra of Ca₂Al₂SiO₇:Ce³⁺ phosphor showed the characteristic emission of Ce³⁺ peaking at 400 nm (UV–violet) and originating from the Ce³⁺ transitions of 5d‐4f (²F_5/2 and ²F_7/2). The photoluminescence (PL) emission spectra for Ca₂Al₂SiO₇:Ce³⁺ were similar to the ML/TL emission spectra. The mechanism of ML excitation and the suitability of the Ca₂Al₂SiO₇:Ce³⁺phosphor for radiation dosimetry are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of UV irradiation on different types of luminescence of SrAl2O4:Eu,Dy phosphors

This paper reports the luminescence behavior of Sr_0.097Al₂O₄:Eu_0.01,Dy_0.02 phosphors under UV‐irradiation. The effect of UV‐irradiation on afterglow (AG), thermoluminescence (TL) and mechanoluminescence (ML) of Sr_0.097Al₂O₄:Eu_0.01,Dy_0.02 phosphors is investigated. The space group of Sr_0.097Al₂O₄:Eu_0.01,Dy_0.02 phosphors is monoclinic P2₁. The prepared phosphors exhibit a long AG, intense TL and ML. It is found that the AG, ML intensity and TL increase with increasing duration of irradiation time. The ML intensity decreases with successive impact of the load onto the phosphors, whereby the diminished ML intensity can be recovered by UV‐irradiation. Copyright © 2016 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence characteristics of Sr3B2O6:Eu2+ yellow phosphor

Sr₃B₂O₆:Eu²⁺ yellow phosphor was prepared by the combustion method. The crystalline structure, photoluminescence and thermoluminescence properties of Sr₃B₂O₆:Eu²⁺ were investigated extensively. The X‐ray diffraction result indicates that the Sr₃B₂O₆:Eu²⁺ phosphor exhibited a rhombohedral crystal structure. The emission spectra under a 435 nm excited wavelength showed an intense broad band peaking at 574 nm, which corresponds to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ion. There were two different sites of Sr replaced by Eu in host lattice. The concentration quenching process between Eu²⁺ ions is determined and the corresponding concentration quenching mechanism was verified as dipole‐quadrupole interaction. The glow curve under 3 Gy β‐ ray irradiation had the glow peak at 160°C and the average activation energy was defined as about 0.98 eV. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence characterization of Dy and Eu doped Na6Mg(SO4)4 phosphors

A series of single‐phase phosphors based on Na₆Mg(SO₄)₄ (Z_eff = 11.70) doped with Dy and Eu was prepared by the wet chemical method. The photoluminescence (PL) and thermoluminescence (TL) properties of Dy³⁺‐ and Eu³⁺‐activated Na₆Mg(SO₄)₄ phosphors were investigated. The characteristic emissions of Dy³⁺ and Eu³⁺ were observed in the Na₆Mg(SO₄)₄ host. The TL glow curve of the Na₆Mg(SO₄)₄:Dy phosphor consisted of a prominent peak at 234°C and a very small hump at 158°C. The TL sensitivity of the Na₆Mg(SO₄)₄:Dy phosphor was found to be four times less than the commercialized CaSO₄:Dy phosphor. The TL dose–response of the Na₆Mg(SO₄)₄:Dy phosphor was studied from a dose range of 5–10 kGy and the linear dose–response was observed up to 1 kGy which is good for a microcrystalline phosphor. Trapping parameters for both the samples were calculated using the Initial Rise and Chen's peak shape methods.     

Luminescence properties of Ce-doped ZrO2 phosphors synthesized by combustion method

Zr_1−xCe_xO₂ with x = 0.005, 0.01, 0.02, and 0.03 samples were synthesized using a combustion technique. The X-ray diffraction results revealed that Ce-doped ZrO₂ nanoparticles were in a monoclinic structure up to 1 mol% Ce concentration. The increase in the Ce concentration caused more distortion in the monoclinic structure of zirconia. The samples showed a mixed phase (monoclinic + tetragonal) beyond 1 mol% Ce content. The crystallite size (D) and strain (ε) were calculated from the Williamson–Hall equation. The D decreased from 25 ± 1 to 20 ± 1 nm and ε increased from 0.03 to 0.28% with an increase in Ce concentration. Photoluminescence (PL) spectra of Zr_1−xCe_xO₂ showed emission in the blue region under an excitation wavelength of 290 nm. Zr_0.995Ce_0.005O₂ showed the highest PL intensity with an average lifetime of 0.93 μs, and the PL intensity decreased with the increase in the Ce concentration. Thermoluminescence (TL) glow curves of Zr_1−xCe_xO₂ were measured after gamma irradiation (500 Gy) with a heating rate of 5 K s⁻¹. The TL curve of Zr_0.995Ce_0.005O₂ showed two prominent peaks at 412 K (peak 1) and 600 K (peak 2). The first TL glow peak was shifted towards a higher temperature at 440 K above 1 mol% Ce concentration. Repetitive TL measurements on the same aliquot exhibited excellent repeatability. Kinetic parameters associated with the TL peaks were calculated using the curve fitting method. Peak 1 followed non-first-order kinetics. The value of the activation energy of the 440 K peak was found to be 0.95 ± 0.01 eV for Zr_0.99Ce_0.01O₂. These findings showed that Zr_1−xCe_xO₂ might be used in lighting and radiation dosimeter applications.     

Synthesis and photoluminescence properties of Sm3+‐doped YAl3(BO3)4 phosphor

A near ultraviolet excitable phosphor based on Sm³⁺‐doped YAl₃(BO₃)₄ has been synthesized by modified solid‐state reaction at 1000°C. The phase purity and photoluminescence (PL) behavior of the phosphor are studied in detail using the powder X‐ray diffraction technique and PL measurements. X‐ray diffraction reveals that the phase purity of YAl₃(BO₃)₄ critically depends upon the boric acid concentration. The phosphor has strong excitation at 406 nm in the near ultraviolet region (350–420 nm) and its emission peaks were monitored at 564, 599 and 643 nm. Further, detailed PL analysis demonstrates that the substitution of Sm³⁺ ions at sites of Y³⁺ and Al³⁺ ions enhances the PL efficiency of the phosphor appreciably. First, the PL efficiency of YAl₃(BO₃)₄:Sm³⁺ was compared with commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The Fourier transform infrared study provides essential information regarding the change in metal–oxygen bond vibrations of the phosphor. The morphology of the phosphor was investigated through scanning electron microscopy, which reveals that the phosphor possessed distorted spherical and rectangular shapes with average grain sizes in the range 0.5–1 µm. Copyright © 2013 John Wiley & Sons, Ltd.