Genome-wide SNP identification for the construction of a high-resolution genetic map of Japanese flounder (Paralichthys olivaceus): applications to QTL mapping of Vibrio anguillarum disease resistance and comparative genomic analysis

High-resolution genetic maps are essential for fine mapping of complex traits, genome assembly, and comparative genomic analysis. Single-nucleotide polymorphisms (SNPs) are the primary molecular markers used for genetic map construction. In this study, we identified 13,362 SNPs evenly distributed across the Japanese flounder (Paralichthys olivaceus) genome. Of these SNPs, 12,712 high-confidence SNPs were subjected to high-throughput genotyping and assigned to 24 consensus linkage groups (LGs). The total length of the genetic linkage map was 3,497.29 cM with an average distance of 0.47 cM between loci, thereby representing the densest genetic map currently reported for Japanese flounder. Nine positive quantitative trait loci (QTLs) forming two main clusters for Vibrio anguillarum disease resistance were detected. All QTLs could explain 5.1–8.38% of the total phenotypic variation. Synteny analysis of the QTL regions on the genome assembly revealed 12 immune-related genes, among them 4 genes strongly associated with V. anguillarum disease resistance. In addition, 246 genome assembly scaffolds with an average size of 21.79 Mb were anchored onto the LGs; these scaffolds, comprising 522.99 Mb, represented 95.78% of assembled genomic sequences. The mapped assembly scaffolds in Japanese flounder were used for genome synteny analyses against zebrafish (Danio rerio) and medaka (Oryzias latipes). Flounder and medaka were found to possess almost one-to-one synteny, whereas flounder and zebrafish exhibited a multi-syntenic correspondence. The newly developed high-resolution genetic map, which will facilitate QTL mapping, scaffold assembly, and genome synteny analysis of Japanese flounder, marks a milestone in the ongoing genome project for this species.     

An integrated SSR based linkage map for <Emphasis Type="Italic">Zoysia matrella</Emphasis> L. and <Emphasis Type="Italic">Z. japonica</Emphasis> Steud.

Japanese lawngrass (Zoysia japonica) and Manila grass (Z. matrella) are the two most important and commonly used Zoysia species. A consensus based SSR linkage map was developed for the genus by combining maps from each species. This used previously constructed maps for two Z. japonica populations and a new map from Z. matrella. The new SSR linkage map for Z. matrella was based on 86 F₂ individuals and contained 213 loci and covered a map distance of 1,351.2 cM in 32 linkage groups. Comparison of the three linkage maps constructed from populations with different genetic backgrounds indicated that most markers exhibited a consensus order, although some intervals or regions displayed discrepancy in marker orders or positions. The integrated map comprises 507 loci with a mean interval of 4.1 cM, covering a map distance of 2,066.6 cM in 22 linkage groups. The SSR-based map will allow marker-assisted selection and be useful for the mapping and cloning of economically important genes or quantitative trait loci.     

Construction of an Integrated Map of Haliotis diversicolor Using Microsatellite Markers

Small abalone, Haliotis diversicolor, is naturally distributed along the coastal waters of East Asia from Japan to the Philippines. It is an economically important maricultured species in southern China and Taiwan. Genetic linkage maps for small abalone were constructed using a total of 308 simple sequence repeat markers including 297 novel markers. Segregation data on 96 progeny were genotyped using a pseudo-testcross strategy. Sixteen linkage groups were identified in both female and male maps, consistent with the haploid chromosome number. The female linkage map covered 758.3 cM, with an average interval of 5.2 cM. The male linkage map spanned a total genetic distance of 676.2 cM, with an average interval of 4.5 cM. An integrated map was constructed by incorporating the homologous parental linkage groups, resulting in 16 linkage groups with a total of 762.1 cM. Genome coverage of the integrated linkage map was approximately 80.7%. The genetic linkage maps of small abalone may facilitate marker-assisted selection and quantitative trait loci mapping.     

A genetic linkage map construction for sesame (Sesamum indicum L.)

Sesame (Sesamum indicum L.) is one of the oldest oilseed crops with high seed oil quality. The first sesame genetic linkage map based on F2 segregating population of an intraspecific cross between two cultivars was constructed. Using three types of PCR-based markers, 284 polymorphic loci including 10 EST-SSR marker, 30 AFLP marker and 244 RSAMPL marker, respectively, had been screened. Subsequently, a total of 220 molecular markers were mapped in 30 linkage groups covering a genetic length of 936.72 cM, and the average distance between markers was 4.93 cM. In this map, the linkage groups contained from 2 to 33 loci each and ranged in distance from 6.44 cM to 74.52 cM. Based on map information, sesame genome length was estimated to be approximately 1,232.53 cM, and genome coverage of this map was about 76.0%. As a starting point of sesame genome study, the genetic linkage map will be hopeful to tag traits of breeding interest and further aid in the sesame molecular breeding. Furthermore, RSAMPL marker had been also appreciated in this paper, for its first usage in genetic map construction and higher utilization potential in some crop species lacking much genome information.     

Construction of a genetic linkage map in Fenneropenaeus chinensis using SNP markers

Genetic linkage maps of Fenneropenaeus chinensis were constructed using a “double pseudo-testcross” strategy with 200 single nucleotide polymorphisms (SNPs) markers. This study represents the first SNP genetic linkage map for F. chinensis. The parents and F ₁ progeny of 100 individuals were used as mapping populations. 21 genetic linkage groups in the male and female maps were identified. The male linkage map was composed of 115 loci and spanned 879.7 cM, with an average intermarker spacing of 9.4 cM, while the female map was composed of 119 loci and spanned 876.2 cM, with an average intermarker spacing of 8.9 cM. The estimated coverage of the linkage maps was 51.94% for the male and 53.77% for the female, based on two estimates of genome length. The integrated map contains 180 markers distributed in 16 linkage groups, and spans 899.3 cM with an average marker interval of 5.2 cM. This SNP genetic map lays the foundation for future shrimp genomics and genetic breeding studies, especially the discovery of gene or regions for economically important traits in Chinese shrimp.     

Genetic Linkage Map Construction and QTL Mapping of Salt Tolerance Traits in Zoysiagrass (Zoysia japonica)

Zoysiagrass (Zoysia Willd.) is an important warm season turfgrass that is grown in many parts of the world. Salt tolerance is an important trait in zoysiagrass breeding programs. In this study, a genetic linkage map was constructed using sequence-related amplified polymorphism markers and random amplified polymorphic DNA markers based on an F₁ population comprising 120 progeny derived from a cross between Zoysia japonica Z105 (salt-tolerant accession) and Z061 (salt-sensitive accession). The linkage map covered 1211 cM with an average marker distance of 5.0 cM and contained 24 linkage groups with 242 marker loci (217 sequence-related amplified polymorphism markers and 25 random amplified polymorphic DNA markers). Quantitative trait loci affecting the salt tolerance of zoysiagrass were identified using the constructed genetic linkage map. Two significant quantitative trait loci (qLF-1 and qLF-2) for leaf firing percentage were detected; qLF-1 at 36.3 cM on linkage group LG4 with a logarithm of odds value of 3.27, which explained 13.1% of the total variation of leaf firing and qLF-2 at 42.3 cM on LG5 with a logarithm of odds value of 2.88, which explained 29.7% of the total variation of leaf firing. A significant quantitative trait locus (qSCW-1) for reduced percentage of dry shoot clipping weight was detected at 44.1 cM on LG5 with a logarithm of odds value of 4.0, which explained 65.6% of the total variation. This study provides important information for further functional analysis of salt-tolerance genes in zoysiagrass. Molecular markers linked with quantitative trait loci for salt tolerance will be useful in zoysiagrass breeding programs using marker-assisted selection.     

Construction of the First High-Density Genetic Linkage Map and Analysis of Quantitative Trait Loci for Growth-Related Traits in <Emphasis Type="Italic">Sinonovacula constricta</Emphasis>

The razor clam (Sinonovacula constricta) is an important aquaculture species, for which a high-density genetic linkage map would play an important role in marker-assisted selection (MAS). In this study, we constructed a high-density genetic map and detected quantitative trait loci (QTLs) for Sinonovacula constricta with an F₁ cross population by using the specific locus amplified fragment sequencing (SLAF-seq) method. A total of 315,553 SLAF markers out of 467.71 Mreads were developed. The final linkage map was composed of 7516 SLAFs (156.60-fold in the parents and 20.80-fold in each F₁ population on average). The total distance of the linkage map was 2383.85 cM, covering 19 linkage groups with an average inter-marker distance of 0.32 cM. The proportion of gaps less than 5.0 cM was on average 96.90%. A total of 16 suggestive QTLs for five growth-related traits (five QTLs for shell height, six QTLs for shell length, three QTLs for shell width, one QTL for total body weight, and one QTL for soft body weight) were identified. These QTLs were distributed on five linkage groups, and the regions showed overlapping on LG9 and LG13. In conclusion, the high-density genetic map and QTLs for S. constricta provide a valuable genetic resource and a basis for MAS.     

A Simple Sequence Repeat- and Single-Nucleotide Polymorphism-Based Genetic Linkage Map of the Brown Planthopper,Nilaparvata lugens

In this study, we developed the first genetic linkage map for the major rice insect pest, the brown planthopper (BPH, Nilaparvata lugens). The linkage map was constructed by integrating linkage data from two backcross populations derived from three inbred BPH strains. The consensus map consists of 474 simple sequence repeats, 43 single-nucleotide polymorphisms, and 1 sequence-tagged site, for a total of 518 markers at 472 unique positions in 17 linkage groups. The linkage groups cover 1093.9 cM, with an average distance of 2.3 cM between loci. The average number of marker loci per linkage group was 27.8. The sex-linkage group was identified by exploiting X-linked and Y-specific markers. Our linkage map and the newly developed markers used to create it constitute an essential resource and a useful framework for future genetic analyses in BPH.     

Construction of High-Density Genetic Linkage Maps and Mapping of Growth-Related Quantitative Trail Loci in the Japanese Flounder (Paralichthys olivaceus)

High-density genetic linkage maps were constructed for the Japanese flounder (Paralichthys olivaceus). A total of 1624 microsatellite markers were polymorphic in the reference family. Linkage analysis using JoinMap 4.0 resulted in the mapping of 1487 markers to 24 linkage groups, a result which was consistent with the 24 chromosomes seen in chromosome spreads. The female map was composed of 1257 markers, covering a total of 1663.8 cM with an average interval 1.35 cM between markers. The male map consisted of 1224 markers, spanning 1726.5 cM, with an average interval of 1.44 cM. The genome length in the Japanese flounder was estimated to be 1730.3 cM for the females and 1798.0 cM for the males, a coverage of 96.2% for the female and 96.0% for the male map. The mean recombination at common intervals throughout the genome revealed a slight difference between sexes, i.e. 1.07 times higher in the male than female. High-density genetic linkage maps are very useful for marker-assisted selection (MAS) programs for economically valuable traits in this species and for further evolutionary studies in flatfish and vertebrate species. Furthermore, four quantiative trait loci (QTL) associated with growth traits were mapped on the genetic map. One QTL was identified for body weight on LG 14 f, which explained 14.85% of the total variation of the body weight. Three QTL were identified for body width on LG14f and LG14m, accounting for 16.75%, 13.62% and 13.65% of the total variation in body width, respectively. The additive effects were evident as negative values. There were four QTL for growth traits clustered on LG14, which should prove to be very useful for improving growth traits using molecular MAS.     

A first-generation microsatellite linkage map of the Japanese quail

A linkage map of the Japanese quail (Coturnix japonica) genome was constructed based upon segregation analysis of 72 microsatellite loci in 433 F(2) progeny of 10 half-sib families obtained from a cross between two quail lines of different genetic origins. One line was selected for long duration of tonic immobility, a behavioural trait related to fearfulness, while the other was selected based on early egg production. Fifty-eight of the markers were resolved into 12 autosomal linkage groups and a Z chromosome-specific linkage group, while the remaining 14 markers were unlinked. The linkage groups range from 8 cM (two markers) to 206 cM (16 markers) and cover a total map distance of 576 cM with an average spacing of 10 cM between loci. Through comparative mapping with chicken (Gallus gallus) using orthologous markers, we were able to assign linkage groups CJA01, CJA02, CJA05, CJA06, CJA14 and CJA27 to chromosomes. This map, which is the first in quail based solely on microsatellites, is a major step towards the development of a quality molecular genetic map for this valuable species. It will provide an important framework for further genetic mapping and the identification of quantitative trait loci controlling egg production and fear-related behavioural traits in quail.     

Construction of a SNP-based genetic linkage map for kiwifruit using next-generation restriction-site-associated DNA sequencing (RADseq)

Kiwifruit is a perennial horticultural crop species of the Actinidiaceae family and has high nutritional value. For a species with a long generation time, traditional breeding and genetic improvement is predicted to take more than 20 years to obtain superior cultivars. Thus, marker-assisted selection (MAS) should be used to accelerate the breeding process. Development of a genetic linkage map and molecular markers are pre-requisites for MAS of crop species. Here, we report a genome-wide SNP-based genetic map of kiwifruit by analysing next-generation restriction-site-associated DNA sequencing (RADseq) reads. To construct a genetic linkage map, a 102 F1 line mapping population of Actinidia chinensis (2n = 58) was derived by combining parents that had contrasting phenotypic traits. The maternal map contained 4112 SNP loci and spanned a distance of 3821 cM, with an average adjacent-marker interval length of 0.929 cM. The map length of the 29 linkage groups ranged from 78.3 to 169.9 cM, with an average length of 131.8 cM. High levels of collinearity between the 29 genetic maps with the kiwifruit reference genome were found. The genetic map developed in this study can serve as an important platform to improve kiwifruit research, including anchoring unmapped scaffolds of the kiwifruit genome sequence and mapping QTLs (quantitative trait loci) that control economically important traits.     

An RFLP-based genetic map of pearl millet (Pennisetum glaucum)

Analysis of a sample of diverse pearl millet genotypes with 200 genomic DNA probes revealed this crop species to be extremely polymorphic. Among these genotypes, 85% of probes detected polymorphism using only two restriction enzymes, with an average pair-wise polymorphism between all of the probe-enzyme combinations of 56%. Two crosses were employed to construct an RFLP-based genetic map. In an intervarietal F₂ population, derived from a single F₁ plant, 181 loci were placed on a linkage map. The total length of this map, which comprised seven linkage groups, was 303 cM and the average map distance between loci was about 2 cM, although a few intervals in excess of 10 cM were present at the ends of a few linkage groups. Very few clones, including those which hybridized to more than one copy, detected more than one locus in the pearl millet genome. The analysis was complicated initially because 83 of the 181 loci mapped to a single linkage group. Analysis of a second cross identified a probable translocation breakpoint in the middle of this large linkage group.     

A genetic linkage map for coho salmon (Oncorhynchus kisutch)

Construction of genetic linkage maps is an important first step for a variety of genomic applications, such as selective breeding in aquaculture, comparative studies of chromosomal evolution and identification of loci that have played key roles in the evolution of a species. Here we present a sex-specific linkage map for coho salmon. The map was constructed using 148 AFLP markers, 133 microsatellite loci and the phenotypic locus SEX . Twenty-four linkage groups spanning 287.4 cM were mapped in males, and 33 linkage groups spanning 429.7 cM were mapped in females. Several male linkage groups corresponded to two female linkage groups. The combination of linkage groups across both sexes appeared to characterize regions of 26 chromosomes. Two homeologous chromosomes were identified based on information from duplicated loci. Homologies between the coho and rainbow trout maps were examined. Eighty-six loci were found to form common linkage relationships between the two maps; these relationships provided evidence for whole-arm fissions, fusions and conservation of chromosomal regions in the evolution of these two species.     

AFLP-based genetic linkage map for the red flour beetle (Tribolium castaneum)

The red flour beetle (Tribolium castaneum) is a major pest of stored grain and grain products and a popular model species for a variety of ecological, evolutionary, and developmental biology studies. Development of a linkage map based on reproducible and highly polymorphic molecular markers would greatly facilitate research in these disciplines. We have developed a genetic linkage map using 269 amplified fragment length polymorphism (AFLP) markers. Ten previously known random amplified polymorphic DNA (RAPD) markers were used as anchor markers for linkage group assignment. The linkage map was constructed through genotyping two independent F(2) segregating populations with 48 AFLP primer combinations. Each primer combination generated an average of 4.6 AFLP markers eligible for linkage mapping. The length of the integrated map is 573 cM, giving an average marker resolution of 2.0 cM and an average physical distance per genetic distance of 350 kb/cM. A cluster of loci on linkage group 3 exhibited significant segregation distortion. We have also identified six X-linked and two Y-linked markers. Five mapped AFLP fragments were sequenced and converted to sequence-tagged site (STS) markers.     

A first‐generation microsatellite linkage map of the ruff

A linkage map of the ruff (Philomachus pugnax) genome was constructed based on segregation analysis of 58 microsatellite loci from 381 captive‐bred individuals spanning fourteen breeding years and comprising 64 families. Twenty‐eight of the markers were resolved into seven linkage groups and five single marker loci, homologous to known chicken (Gallus gallus) and zebra finch (Taeniopygia guttata) chromosomes. Linkage groups range from 10.1 to 488.7 cM in length and covered a total map distance of 641.6 cM, corresponding to an estimated 30–35% coverage of the ruff genome, with a mean spacing of 22.9 cM between loci. Through comparative mapping, we are able to assign linkage groups Ppu1, Ppu2, Ppu6, Ppu7, Ppu10, Ppu13, and PpuZ to chromosomes and identify several intrachromosomal rearrangements between the homologs of chicken, zebra finch, and ruff microsatellite loci. This is the first linkage map created in the ruff and is a major step toward providing genomic resources for this enigmatic species. It will provide an essential framework for mapping of phenotypically and behaviorally important loci in the ruff.     

A restriction fragment length polymorphism based linkage map of a diploid Avena recombinant inbred line population.

A population of 100 F6-derived recombinant inbred lines was developed from the cross of two diploid (2n = 14) Avena accessions, CI3815 (A. strigosa) and C11994 (A. wiestii). Restriction fragment length polymorphism (RFLP) probes previously mapped in other grass species were used to develop a framework linkage map suitable for comparative genetics. Nine linkage groups were identified among the 181 loci mapped, with an average interlocus distance of 5 cM, and a total genetic map length of 880 cM. A cluster of five tightly linked crown rust resistance genes (Pca) was localized on the map, as were five loci identified by disease resistance gene analogs from maize, sorghum, and wheat. None of the five loci identified by the gene analogs were linked to the Pca locus. The linkage map was compared with previously published diploid and hexaploid linkage maps in an attempt to identify homologous or homoeologous chromosomes between populations. Locus orders and linkage relationships were poorly conserved between the A. strigosa x A. wiestii map and other Avena maps. In spite of mapping complications due to duplications within a basic genome a well as the allopolyploid constitution of many Avena species, such map comparisons within Avena provide further evi dence of substantial chromosomal rearrangement between species within Avena.     

Construction of genetic linkage maps and QTL mapping for X-disease resistance in tetraploid chokecherry (Prunus virginiana L.) using SSR and AFLP markers

Chokecherry (Prunus virginiana L.) (2n = 4x = 32) is a unique Prunus species for both genetics and disease resistance research due to its tetraploid nature and known variations in X-disease resistance. X-disease is a destructive disease of stone fruit trees, causing yield loss and poor fruit quality. However, genetic and genomic information on chokecherry is limited. In this study, simple sequence repeat (SSR) and amplified fragment length polymorphism (AFLP) markers were used to construct genetic linkage maps and to identify quantitative trait loci (QTLs) associated with X-disease resistance in chokecherry. A segregating population (101 progenies) was developed by crossing an X-disease-resistant chokecherry line (RC) with a susceptible chokecherry line (SC). A total of 498 DNA markers (257 SSR and 241 AFLP markers) were mapped on the two genetic maps of the two parental lines (RC and SC). The map of RC contains 302 markers assigned to 14 linkage groups covering 2,089 cM of the genome. The map of SC has 259 markers assigned to 16 linkage groups covering 1,562.4 cM of the genome. The average distance between two markers was 6.9 cM for the RC map and 6.0 cM for the SC map. One QTL located on linkage group 15 on the map of SC was found to be associated with X-disease resistance. Genetic linkage maps and the identified QTL linked to X-disease resistance will further facilitate genetic research and breeding of X-disease resistance in chokecherry and other Prunus species.     

A first genetic linkage map of mulberry (Morus spp.) using RAPD, ISSR, and SSR markers and pseudotestcross mapping strategy

To lay the foundation for molecular breeding efforts, the first genetic linkage map of mulberry (2n=2x=28) was constructed with 50 F1 full-sib progeny using randomly amplified polymorphic DNA (RAPD), inter-simple sequence repeat (ISSR), and simple sequence repeat (SSR) markers and two-way pseudotestcross mapping strategy. We selected 100 RAPD, 42 ISSR, and 9 SSR primers that amplified 517 markers, of which 188 (36.36%) showed a test-cross configuration, corresponding to the heterozygous condition in one parent and null in the other. Two separate female and male maps were constructed using 94 each of female- and male-specific testcross markers, containing 12 female linkage groups and 14 male linkage groups. At a minimum logarithm of the odds (LOD) score threshold of 6.0 and at a maximum map distance of 20 cM, the female map covered a 1,196.6-cM distance, with an average distance of 15.75 cM and maximum map distance of 37.9 cM between two loci; the male-specific map covered a 1,351.7-cM distance, with an average distance of 18.78 cM and a maximum map distance between two loci is of 34.7 cM. The markers distributed randomly in all linkage groups without any clustering. All 12 linkage groups in the female-specific map consisted of 4–10 loci ranging in length from 0 to 140.4 cM, and in the male-specific map, the 13 largest linkage groups (except linkage group 12, which contained three loci) consisted of 4–12 loci, ranging in length from 53.9 to 145.9 cM and accounting for 97.22% of the total map distance. When mapping, progeny pass through their juvenile phase and assume their adult characters, mapping morphological markers and identification of quantitative trait loci for adaptive traits will be the primary target. In that sense, our map provides reference information for future molecular breeding work on Morus and its relatives.     

A molecular linkage map of olive (Olea europaea L) based on RAPD, microsatellite, and SCAR markers.

An integrated molecular linkage map of olive (Olea europaea L.) was constructed based on randomly amplified polymorphic DNA (RAPD), sequence characterized amplified region (SCAR), and microsatellite markers using the pseudo-testcross strategy. A mapping population of 104 individuals was generated from an F1 full-sib family of a cross between 'Frantoio' and 'Kalamata'. The hybridity of the mapping population was confirmed by genetic similarity and nonmetric multidimensional scaling. Twenty-three linkage groups were mapped for 'Kalamata', covering 759 cM of the genome with 89 loci and an average distance between loci of 11.5 cM. Twenty-seven linkage groups were mapped for 'Frantoio', covering 798 cM of the genome with 92 loci and an average distance between loci of 12.3 cM. For the integrated map, 15 linkage groups covered 879 cM of the genome with 101 loci and an average distance between loci of 10.2 cM. The size of the genomic DNA was estimated to be around 3000 cM. A sequence characterized amplified region marker linked to olive peacock disease resistance was mapped to linkage group 2 of the integrated map. These maps will be the starting point for studies on the structure, evolution, and function of the olive genome. When the mapping progeny pass through their juvenile phase and assume their adult characters, mapping morphological markers and identification of quantitative trait loci for adaptive traits will be the primary targets.