Ligase-free subcloning: a versatile method to subclone polymerase chain reaction (PCR) products in a single day.

Often, it is convenient to subclone polymerase chain reaction (PCR) products into a plasmid vector for subsequent replication in bacteria, but conventional subcloning methods often fail. We report a rapid and versatile method to subclone PCR products directionally into a specific site of virtually any plasmid vector. The procedure requires only four primers, does not require DNA ligase, and may be accomplished in a single day. Ligase-free subcloning is performed by incorporating into the PCR primers sequences at the 5' ends that result in PCR products whose 3' ends are complementary to the 3' ends of the recipient linearized plasmid. The PCR product and the linearized plasmid are spliced together in a second PCR reaction in which Taq polymerase extends the complementary overlapping 3' ends (ligation by overlap extension). Denaturation followed by heterologous reannealing and cyclization results in a cyclic recombinant plasmid with two nicks that may be used directly to transform competent Escherichia coli. In our hands, ligase-free subcloning is rapid, and offers many advantages over existing strategies.     

HPLC purification of polymerase chain reaction products for direct sequencing

Same day PCR amplification and sequencing is desired in situations where one needs to sequence a number of PCR products. The rapid, high-yield purification of PCR products via the use of high performance, anion-exchange chromatography yields sequencing results comparable to those obtained from techniques requiring subcloning of the PCR product. This can be achieved by standard dideoxynucleotide sequencing technology without the need to prepare prelabeled primers and additional internal primers or to gel purify the PCR product. In addition, this chromatographic technique offers the potential of isolating several PCR products from the same amplification mixture.     

一步3’RACE快速构建鸡MnSOD全长cDNA克隆Rapid

本研究尝试将触减 PCR与3’ cDNA末端快速扩增（rapid amplification of cDNA ends,RACE）技术进行结合,仅用一条特异性引物和一条通用引物,成功地实现了从3’末端cDNA库对鸡含锰超氧化物歧化酶（manganese-containing superoxide dismutase,MnSOD）全长cDNA的一步3’RACE快速构建。与常规使用的末端PCR或亚克隆方法相比,该法具有快速、省时、经济和特异性好的优点。Abstract: RACE(rapid amplification of cDNA ends) is a popular technique to rapidly obtain the full-length cDNA. After obtaining the 3’cDNA and 5’cDNA fragments with a overlapped region by 3’RACE and 5’RACE, the full-length cDNA could be generated by end-to-end PCR or subcloning. In this study, 3’RACE combined with touch-down PCR was successfully used for the rapid construction of full-length MnSOD cDNA of chickens. Compared with the conventional end-to-end PCR or subcloning, this method, called one-step 3’RACE, is fast, economical and highly specific. It especially fits the rapid construction of full-length cDNA by RACE method.     

ADAR2 induces reproducible changes in sequence and abundance of mature microRNAs in the mouse brain

Adenosine deaminases that act on RNA (ADARs) deaminate adenosines to inosines in double-stranded RNAs including miRNA precursors. A to I editing is widespread and required for normal life. By comparing deep sequencing data of brain miRNAs from wild-type and ADAR2 deficient mouse strains, we detect editing sites and altered miRNA processing at high sensitivity. We detect 48 novel editing events in miRNAs. Some editing events reach frequencies of up to 80%. About half of all editing events depend on ADAR2 while some miRNAs are preferentially edited by ADAR1. Sixty-four percent of all editing events are located within the seed region of mature miRNAs. For the highly edited miR-3099, we experimentally prove retargeting of the edited miRNA to novel 3′ UTRs. We show further that an abundant editing event in miR-497 promotes processing by Drosha of the corresponding pri-miRNA. We also detect reproducible changes in the abundance of specific miRNAs in ADAR2-deficient mice that occur independent of adjacent A to I editing events. This indicates that ADAR2 binding but not editing of miRNA precursors may influence their processing. Correlating with changes in miRNA abundance we find misregulation of putative targets of these miRNAs in the presence or absence of ADAR2.     

Global profiling of miRNAs and the hairpin precursors: insights into miRNA processing and novel miRNA discovery

MicroRNAs (miRNAs) constitute an important class of small regulatory RNAs that are derived from distinct hairpin precursors (pre-miRNAs). In contrast to mature miRNAs, which have been characterized in numerous genome-wide studies of different organisms, research on global profiling of pre-miRNAs is limited. Here, using massive parallel sequencing, we have performed global characterization of both mouse mature and precursor miRNAs. In total, 87 369 704 and 252 003 sequencing reads derived from 887 mature and 281 precursor miRNAs were obtained, respectively. Our analysis revealed new aspects of miRNA/pre-miRNA processing and modification, including eight Ago2-cleaved pre-miRNAs, eight new instances of miRNA editing and exclusively 5′ tailed mirtrons. Furthermore, based on the sequences of both mature and precursor miRNAs, we developed a miRNA discovery pipeline, miRGrep, which does not rely on the availability of genome reference sequences. In addition to 239 known mouse pre-miRNAs, miRGrep predicted 41 novel ones with high confidence. Similar as known ones, the mature miRNAs derived from most of these novel loci showed both reduced abundance following Dicer knockdown and the binding with Argonaute2. Evaluation on data sets obtained from Caenorhabditis elegans and Caenorhabditis sp.11 demonstrated that miRGrep could be widely used for miRNA discovery in metazoans, especially in those without genome reference sequences.     

A novel system for large-scale sequencing of cDNA by PCR amplification.

We have developed a method for constructing a library containing the 3' end fragment of cDNA for large-scale sequencing of cDNA clones. The average size of the insert was 270 bp. Cell lysates that carry plasmids having the cDNA insert were subjected to PCR amplification of the cDNA moiety and the products were subjected to sequencing analysis using an autosequencer. With this protocol, sample preparation became a non-limiting step, that allowed us to sequence as many samples as the autosequencer could handle.     

Accurate clinical genetic testing for autoinflammatory diseases using the next-generation sequencing platform MiSeq

Autoinflammatory diseases occupy one of a group of primary immunodeficiency diseases that are generally thought to be caused by mutation of genes responsible for innate immunity, rather than by acquired immunity. Mutations related to autoinflammatory diseases occur in 12 genes. For example, low-level somatic mosaic NLRP3 mutations underlie chronic infantile neurologic, cutaneous, articular syndrome (CINCA), also known as neonatal-onset multisystem inflammatory disease (NOMID). In current clinical practice, clinical genetic testing plays an important role in providing patients with quick, definite diagnoses. To increase the availability of such testing, low-cost high-throughput gene-analysis systems are required, ones that not only have the sensitivity to detect even low-level somatic mosaic mutations, but also can operate simply in a clinical setting. To this end, we developed a simple method that employs two-step tailed PCR and an NGS system, MiSeq platform, to detect mutations in all coding exons of the 12 genes responsible for autoinflammatory diseases. Using this amplicon sequencing system, we amplified a total of 234 amplicons derived from the 12 genes with multiplex PCR. This was done simultaneously and in one test tube. Each sample was distinguished by an index sequence of second PCR primers following PCR amplification. With our procedure and tips for reducing PCR amplification bias, we were able to analyze 12 genes from 25 clinical samples in one MiSeq run. Moreover, with the certified primers designed by our short program—which detects and avoids common SNPs in gene-specific PCR primers—we used this system for routine genetic testing. Our optimized procedure uses a simple protocol, which can easily be followed by virtually any office medical staff. Because of the small PCR amplification bias, we can analyze simultaneously several clinical DNA samples with low cost and can obtain sufficient read numbers to detect a low level of somatic mosaic mutations.     

Half-site editing: an in vitro mutagenesis procedure for truncating a DNA fragment and introducing a new restriction site

Half-site editing is an in vitro mutagenesis procedure designed for use in making precise plasmid constructions. Like many in vitro mutagenesis techniques, this procedure involves hybridization of a mutagenic oligonucleotide primer to single-stranded template DNA followed by polymerization with DNA polymerase I (Klenow). Half-site editing differs from other techniques in two main ways. First, T4 DNA polymerase treatment truncates the target DNA at a point determined by the primer and repairs any mismatches to the sequence specified by the primer. Second, a blunt-end ligation step is included. This ligation exploits the symmetry inherent in most restriction sites to create a desired restriction site at the truncated end of the target DNA fragment. Half-site editing has been used to place ClaI restriction sites at the 3' end of the yeast pyruvate kinase promoter and at two positions at the 5' end of the yeast acetolactate synthase coding sequence.     

Single-cell cDNA-PCR: removal of contaminating genomic DNA from total RNA using immobilized DNase I.

A procedure utilizing immobilized DNase I that allows the efficient amplification of cDNA by PCR from a single cell in the absence of contaminating genomic DNA is described. DNase I treated, total RNA derived from single cells was reverse transcribed into cDNA followed by PCR using beta-actin and c-fos specific primers that recognize different exons of the respective genes. Amplification products corresponding to cDNA, but not to genomic sequences, were detected after treatment with immobilized DNase I in samples previously shown to be contaminated with genomic DNA. This method allows the efficient removal of DNA contaminating total RNA derived from a single cell.     

Improved annotation of C. elegans microRNAs by deep sequencing reveals structures associated with processing by Drosha and Dicer

MicroRNAs (miRNAs) are small regulatory RNAs that are essential in all studied metazoans. Research has focused on the prediction and identification of novel miRNAs, while little has been done to validate, annotate, and characterize identified miRNAs. Using Illumina sequencing, ～20 million small RNA sequences were obtained from Caenorhabditis elegans. Of the 175 miRNAs listed on the miRBase database, 106 were validated as deriving from a stem-loop precursor with hallmark characteristics of miRNAs. This result suggests that not all sequences identified as miRNAs belong in this category of small RNAs. Our large data set of validated miRNAs facilitated the determination of general sequence and structural characteristics of miRNAs and miRNA precursors. In contrast to previous observations, we did not observe a preference for the 5' nucleotide of the miRNA to be unpaired compared to the 5' nucleotide of the miRNA*, nor a preference for the miRNA to be on either the 5' or 3' arm of the miRNA precursor stem-loop. We observed that steady-state pools of miRNAs have fairly homogeneous termini, especially at their 5' end. Nearly all mature miRNA-miRNA* duplexes had two nucleotide 3' overhangs, and there was a preference for a uracil in the first and ninth position of the mature miRNA. Finally, we observed that specific nucleotides and structural distortions were overrepresented at certain positions adjacent to Drosha and Dicer cleavage sites. Our study offers a comprehensive data set of C. elegans miRNAs and their precursors that significantly decreases the uncertainty associated with the identity of these molecules in existing databases.     

Analysis of the 3' UTR of the ART3 and ART4 gene by 3' inverse RACE-PCR.

3' Rapid amplification of cDNA ends (3' RACE) is a polymerase chain reaction (PCR) based technique which has been developed to analyse 3' ends of partially known cDNA sequences. To improve the effectiveness of the technique, many investigators have modified the RACE protocol. Here, we describe an alternative procedure for analysing 3' mRNA ends which is based on DNA ligase-mediated self circularization and inverse PCR. This technique is simple and characterized by the exclusive use of gene-specific primers and the absence of unspecific adaptor sequences to obtain highly specific PCR products. We applied the method to analyze the 3' UTR of human mono-ADP-ribosyltransferase (ART) 3 mRNA in testis and heart muscle and of ART4 mRNA in HEL cells. The obtained sequences of ART3 and ART4 mRNA corresponded to data base entries of the respective mRNAs. No adenylate/uridylate-rich elements (AREs) were found in the 3' UTR of ART3 mRNA while one ARE class I motif was detected in the 3' UTR of ART4 mRNA.     

Direct and crossover PCR amplification to facilitate Tn5supF-based sequencing of lambda phage clones.

The 264 bp mini-transposon Tn5supF was constructed to sequence DNAs cloned in phage lambda without extensive shotgun subcloning or primer walking. Unique sequences near each transposon end serve as primer binding sites, and a supF gene is used to select transposition to lambda. We describe here PCR methods that facilitate Tn5supF-based sequencing. In a first pass, insertions are mapped relative to the ends of the cloned fragment using pairs of primers specific for vector DNA next to the cloning site and for a Tn5supF end. Most insertions not mapped in this step are near the center of the cloned fragment or in the vector arms, and are then mapped relative to the two innermost insertions by 'crossover' PCR. This involves amplification from primers on different DNA molecules, and generates hybrid DNA products whose lengths correspond to the distances between the two insertions. We routinely amplified more than 6 kb in direct PCR and 3 kb in crossover PCR; at the limit we amplified up to approximately 10 kb in direct PCR and approximately 6 kb in crossover PCR, but not reproducibly. Crossover PCR products were also obtained with insertions separated by only 200 bp, indicating that no rare sites are needed to switch templates. PCR products were purified by adsorption and then elution from glass slurry, and sequenced directly. Ladders of more than 400 bp were obtained from primer sites on each DNA strand; 2 kb was read from crossover PCR products, and showed that they were amplified with fidelity. In conclusion, direct and crossover PCR methods expedite transposon insertion mapping, and yield templates for accurate sequencing of both DNA strands.     

Direct sequencing and bidirectional allele specific polymerase chain reaction of the bovine beta-casein B variant.

We have used the polymerase chain reaction (PCR) to amplify exon VII of the bovine beta-casein gene. The mutations responsible for the B variant were identified by direct sequencing of the amplification products. A bidirectional allele-specific PCR method (BAS-PCR) has been developed using oligonucleotides overlapping the mutation site at their 3' ends. This new procedure allows a rapid and reliable discrimination between the B and non-B alleles of beta-casein.     

Identification and sequencing of two isopentenyladenosine-modified transfer RNAs from Chinese hamster ovary cells.

To determine the presence and identity of isopentenyladenosine-containing transfer RNAs (tRNAs) in a mammalian cell line, we adopted a novel method to isolate, clone and sequence these RNAs. This method was based on 3' polyadenylation of the tRNA prior to cDNA synthesis, PCR amplification, cloning and DNA sequencing. Using this unique procedure, we report the cloning and sequencing of the selenocysteine-tRNA and mitochondrial tryptophan-tRNA from Chinese hamster ovary cells which contain this specific tRNA modification. This new method will be useful in the identification of other tRNAs and other small RNAs where the primary sequence is unknown.     

Long PCR Product Sequencing (LoPPS): a shotgun-based approach to sequence long PCR products

Here we describe a practical procedure for sequencing long PCR products. The method relies on ultrasonic shearing of PCR products, resulting in fragments 700-1,000 nt long. Termini are subsequently repaired to obtain blunt ends and 3' A-overhangs are added before TA cloning. A predetermined number of clones are sequenced using an insert-independent primer to obtain an overlapping contig covering the full length of the PCR product. This method is cost effective and enables the complete sequencing of any large PCR product in a high-throughput format. Processing of amplified DNA requires 3 h handling time prior to the ligation step, and the clone library is available 2 d later. The complete sequence information is obtained approximately 5 d after the PCR step, depending on the sequencing procedure adopted.     

A rapid method for site-specific mutagenesis and directional subcloning by using the polymerase chain reaction to generate recombinant circles

Site-specific mutagenesis and directional subcloning were accomplished by using the polymerase chain reaction to generate products that can recombine to form circular DNA. This DNA was transfected into E. coli without phosphorylation of primers, restriction enzyme digestion or ligation. Specifically, the polymerase chain reaction was used to generate products that when combined, denatured and reannealed, form double-stranded DNA with discrete, cohesive single-stranded ends. The generation of these cohesive ends of DNA permits the formation of precise, directional DNA joints without dependence on enzyme restriction sites. The primers were designed such that these cohesive single-stranded ends annealed to form circular DNA. The recombinant of interest was generated following only 14 amplification cycles. These recombinant circles of DNA were directly transfected into E. coli. In the mutagenesis protocol, the desired mutant was obtained at 83%-100% efficiency. Unwanted mutations were not detected, indicating a less than 0.025% nucleotide misincorporation frequency. In the directional subcloning protocol, inserts were positioned precisely in the recipient plasmid and were in the correct orientation. One unwanted mutation was detected after sequencing 900 bases, indicating a 0.11% nucleotide misincorporation frequency. Each manipulation, from setting up for the DNA amplification to transfection into E. coli. can easily be accomplished in one day.     

利用Taq DNA聚合酶对PCR产物直接进行顺序分析

Taq DNA聚合酶具有反应速度快、温度作用范围广及良好的续进性等特点,可视为一种理想的DNA顺序分析酶。本文首先对非对称性PCR扩增过程中单、双链DNA产物的积累情况进行了分析,然后采用标记延伸二步法,对Taq DNA聚合酶的性质及影响因素进行分析。为进一步改进Taq DNA聚合酶测序的方法,本反应建立了“Klenow-型”的直接掺入标记同位素测序法,即在反应液中加入与标记核苷酸相应的一定浓度的冷dNTP。此法不但解决了二步法中引物后部分DNA顺序无法读出的缺点,而且简化了反应步骤,亦能得到令人满意的顺序分析结果,每次可读出至少400碱基的序列。