Polylactic acid composites incorporating casein functionalized cellulose nanowhiskers

Background

Polylactic acid (PLA) is considered to be a sustainable alternative to petroleum-based polymers for many applications. Using cellulose fiber to reinforce PLA is of great interest recently due to its complete biodegradability and potential improvement of the mechanical performance. However, the dispersion of hydrophilic cellulose fibers in the hydrophobic polymer matrix is usually poor without using hazardous surfactants. The goal of this study was to develop homogenously dispersed cellulose nanowhisker (CNW) reinforced PLA composites using whole milk casein protein, which is an environmentally compatible dispersant.

Results

In this study, whole milk casein was chosen as a dispersant in the PLA-CNW system because of its potential to interact with the PLA matrix and cellulose. The affinity of casein to PLA was studied by surface plasmon resonance (SPR) imaging. CNWs were functionalized with casein and used as reinforcements to make PLA composites. Fluorescent staining of CNWs in the PLA matrix was implemented as a novel and simple way to analyze the dispersion of the reinforcements. The dispersion of CNWs in PLA was improved when casein was present. The mechanical properties of the composites were studied experimentally. Compared to pure PLA, the PLA composites had higher Young’s modulus. Casein (CS) functionalized CNW reinforced PLA (PLA-CS-CNW) at 2 wt% filler content maintained higher strain at break compared to normal CNW reinforced PLA (PLA-CNW). The Young’s modulus of PLA-CS-CNW composites was also higher than that of PLA-CNW composites at higher filler content. However, all composites exhibited lower strain at break and tensile strength at high filler content.

Conclusions

The presence of whole milk casein improved the dispersion of CNWs in the PLA matrix. The improved dispersion of CNWs provided higher modulus of the PLA composites at higher reinforcement loading and maintained the strain and stress at break of the composites at relatively low reinforcement loading. The affinity of the dispersant to PLA is important for the ultimate strength and stiffness of the composites.

     

Direct fabrication of all-cellulose nanocomposite from cellulose microfibers using ionic liquid-based nanowelding

All-cellulose nanocomposite was directly fabricated using nanowelding of cellulose microfibers as a starting material, in 1-butyl-3-methylimidazolium chloride (BMIMCl) as a solvent, for the first time. The average diameter of the reinforcing component (undissolved nanofibrils) in the nanocomposite made directly from cellulose microfibers (NC-microfiber) was 53 ± 16 nm. Owing to its high mechanical properties (tensile strength of 208 MPa and Young's modulus of 20 GPa), high transparency (76% at a wavelength of 800 nm), and complete barrier to air and biodegradability, the NC-microfiber is regarded as a high multiperformance material. The NC-microfiber made directly from cellulose microfibers showed similar macro-, micro-, and nanostructures and the same properties as those made from solvent-based welding of ground cellulose nanofibers (NC-nanofiber). Omitting the step of cellulose nanofiber production makes the direct production of all-cellulose nanocomposite from cellulose microfibers easier, shorter, and cheaper than using cellulose nanofibers as starting material. The direct nanowelding of macro/micrometer-sized materials is theorized to be a fundamental approach for making nanocomposites.     

Surface area and porosity of acid hydrolyzed cellulose nanowhiskers and cellulose produced by Gluconacetobacter xylinus

The physical parameters of cellulose such as surface area and porosity are important in the development of cellulose composites which may contain valuable additives which bind to cellulose. In this area, the use of acid hydrolyzed nano-dimensional cellulose nanowhiskers (CNWs) has attracted significant interest, yet the surface area and porosity of these materials have not been explored experimentally. The objective of this work was to characterize the surface area and porosity of CNWs from different origins (plant cotton/bacterium Gluconacetobacter xylinus) and different acid treatments (H₂SO₄/HCl) by N₂ adsorption; as well as to compare surface area and porosity of bacterial cellulose synthesized by static and agitated cultures. Our results showed that CNWs produced from H₂SO₄/HCl exhibited significantly increased surface area and porosity relative to starting material cotton fiber CF11. Micropores were generated in HCl hydrolyzed CNWs but not in H₂SO₄ hydrolyzed CNWs. Bacterial CNWs exhibited larger surface area and porosity compared to plant CNWs. Cellulose synthesized by G. xylinus ATCC 700178 from agitated cultures also exhibited less surface area and porosity than those from static cultures.     

Orientation of the agarose gel matrix in pulsed electric fields.

The technique of transient electric birefringence was used to investigate the effect of pulsed electric fields on the orientation of the agarose gel matrix. Orientation of the gel was observed at all electric field strengths. Very slow, time-dependent effects were observed when pulses of 10-100 V/cm were applied to 1% gels for 0.5-2 seconds, indicating that domains of the matrix were being oriented by the electric field. The sign of the birefringence reversed when the direction of the applied electric field was reversed, indicating that the domains tend to orient in the perpendicular direction after field reversal. Theories of gel electrophoresis will need to incorporate the orientation of the matrix in order to provide a complete explanation of electrophoresis in agarose gels.     

Modeling crystal and molecular deformation in regenerated cellulose fibers

Experimental deformation micromechanics of regenerated cellulose fibers using Raman spectroscopy have been widely reported. Here we report on computer modeling simulations of Raman band shifts in modes close to the experimentally observed 1095 cm(-1) band, which has previously been shown to shift toward a lower wavenumber upon application of external fiber deformation. A molecular mechanics approach is employed using a previously published model structure of cellulose II. Changing the equilibrium c-spacing of this structure and then performing a minimization routine mimics tensile deformation. Normal-mode analysis is then performed on the minimized structure to predict the Raman-intensive vibrations. By using a dot-product analysis on the predicted eigenvectors it is shown that some Raman active modes close to the 1095 cm(-1) band interchange at certain strain levels. Nevertheless, when this is taken into account it is shown that it is possible to find reasonable agreement between theory and experiment. The effect of the experimentally observed broadening of the Raman bands is discussed in terms of crystalline and amorphous regions of cellulose, and this is compared to the lack of X-ray broadening to explain why discrepancies between theory and experiment are present. A hybrid model structure with a series-parallel arrangement of amorphous and misaligned amorphous-crystalline domains is proposed which is shown to agree with what is observed experimentally. Finally, the theoretical crystal modulus for cellulose II is reported as 98 GPa, which is shown to be in agreement with other studies and with an experimental measurement using synchrotron X-ray diffraction.     

Transient electric birefringence of agarose gels. I. Unidirectional electric fields

The orientation of agarose gels in pulsed electric fields has been studied by the technique of transient electric birefringence. The unidirectional electric fields ranged from 2 to 20 V/cm in amplitude and 1 to 100 s in duration, values within the range typically used for pulsed field gel electrophoresis (PFGE). Agarose gels varying in concentration from 0.3 to 2.0% agarose were studied. The sign of the birefringence varied randomly from one gel to another, as described previously [J. Stellwagen & N. C. Stellwagen (1989), Nucleic Acids Research, Vol. 17, 1537–1548]. The sign and amplitude of the birefringence also varied randomly at different locations within each gel, indicating that agarose gels contain multiple subdomains that orient independently in the electric field. Three or four relaxation times of alternating sign were observed during the decay of the birefringence. The various relaxation times, which range from 1 to ～ 120 s, can be attributed to hierarchies of aggregates that orient in different directions in the applied electric field. The orienting domains range up to ～ 22 μm in size, depending on the pulsing conditions. The absolute amplitude of the birefringence of the agarose gels increased approximately as the square of the electric field strength. The measured Ker constants are ～ 5 orders of magnitude larger than those observed when short, high-voltage pulses are applied to agarose gels. The increase in the Kerr constants in the low-voltage regime parallels the increase in the relaxation times in low-voltage electric fields. Birefringence saturation saturation curves in both the low- and high-voltage regimes can be fitted by theoretical curves for permanent dipole orientation. The apparent permanent dipole moment increase approximately as the 1.6 power of fiber length, consistent with the presence of overlapping agarose helices in the large fiber bundles orienting in low-voltage electric fields, the optical factor is approximately independent of fiber length. Therefore, the marked increase in the Kerr constants observed in the low-voltage regime is due to the large increase in the electrical orientation factor, which is due in turn to the increased length of the fiber bundles and domains orienting in low-voltage electric fields. Since the size of the fiber bundles and domains approximates the size of the DNA molecules being separated by PFGE, the orientation of the agarose matrix in the applied electric field may facilitate the migration of large DNA molecules during PFGE. © 1994 John Wiley & Sons, Inc.     

Magnetic orientation in the semi-terrestrial amphipod, Orchestia cavimana, and its interrelationship with photo-orientation and water loss

ABSTRACT. Orchestia cavimana Heller (Amphipoda, Talitridae) were shown to orient to the geomagnetic field as well as to an anisotropic light field. When tested in an isotropic light field the orientation in the geomagnetic field was either in or opposite to the compass direction of the light vector of the anisotropic light field in which the animals had lived before the test, and this orientation was upset predictably by changing the magnetic field with Helmholtz coils. The polarity of the reaction in both magnetic orientation and photo-orientation was correlated with pre-experimental water loss. The magnetic orientation of O. cavimana is compared with that of Tenebrio molitor , and its biological significance discussed.     

Effective Young's modulus of bacterial and microfibrillated cellulose fibrils in fibrous networks

The deformation micromechanics of bacterial cellulose (BC) and microfibrillated cellulose (MFC) networks have been investigated using Raman spectroscopy. The Raman spectra of both BC and MFC networks exhibit a band initially located at ≈ 1095 cm(-1). We have used the intensity of this band as a function of rotation angle of the specimens to study the cellulose fibril orientation in BC and MFC networks. We have also used the change in this peak's wavenumber position with applied tensile deformation to probe the stress-transfer behavior of these cellulosic materials. The intensity of this Raman band did not change significantly with rotation angle, indicating an in-plane 2D network of fibrils with uniform random orientation; conversely, a highly oriented flax fiber exhibited a marked change in intensity with rotation angle. Experimental data and theoretical analysis shows that the Raman band shift rate arising from deformation of networks under tension is dependent on the angles between the axis of fibrils, the strain axis, the incident laser polarization direction, and the back scattered polarization configurations. From this analysis, the effective moduli of single fibrils of BC and MFC in the networks were estimated to be in the ranges of 79-88 and 29-36 GPa, respectively. It is shown also that for the model to fit the data it is necessary to use a negative Poisson's ratio for MFC networks and BC networks. Discussion of this in-plane "auxetic" behavior is given.     

Magnetic Orientation in Solenopsis sp. Ants

It is known that magnetic fields affect ants behavior. It has been shown that Solenopsis ants are sensitive to magnetic fields but there is no experimental evidence for magnetic orientation. In this paper experiments were done to verify the magnetic orientation of Solenopsis sp. ants. The spontaneous orientation of ants in a circular arena was studied in two different magnetic conditions: in the natural geomagnetic field and under an altered magnetic field, with the horizontal geomagnetic axis shifted in 90?o. Our results show that ants consistently change their orientation direction when the magnetic field was altered. Axial circular statistics analysis showed that, in the absence of other cues, ants orient spontaneously to the horizontal geomagnetic field axis. The present paper shows for the first time magnetic orientation in Solenopsis sp. ants.     

From interfacial ring-opening polymerization to melt processing of cellulose nanowhisker-filled polylactide-based nanocomposites

In the present work, cellulose nanowhiskers (CNWs), extracted from ramie fibers, were incorporated in polylactide (PLA)-based composites. Prior to the blending, PLA chains were chemically grafted on the surface of CNW to enhance the compatibilization between CNW and the hydrophobic polyester matrix. Ring-opening polymerization of l-lactide was initiated from the hydroxyl groups available at the CNW surface to yield CNW-g-PLA nanohybrids. PLA-based nanocomposites were prepared by melt blending to ensure a green concept of the study thereby limiting the use of organic solvents. The influence of PLA-grafted cellulose nanoparticles on the mechanical and thermal properties of the ensuing nanocomposites was deeply investigated. The thermal behavior and mechanical properties of the nanocomposites were determined using differential scanning calorimetry (DSC) and dynamical mechanical and thermal analysis (DMTA), respectively. It was clearly evidenced that the chemical grafting of CNW enhances their compatibility with the polymeric matrix and thus improves the final properties of the nanocomposites. Large modification of the crystalline properties such as the crystallization half-time was evidenced according to the nature of the PLA matrix and the content of nanofillers.     

Influence of domain orientation on the mechanical properties of regenerated cellulose fibers

The determination of the crystal orientation of regenerated cellulose fibers produced under different drawing regimes is presented. Orientation is determined by using wide-angle X-ray diffraction from a synchrotron source and by measuring the azimuthal width of equatorial reflections. The orientation parameter theta is then determined to compare fiber samples. By using a 500 nm beam size, clear differences between the crystal orientations of the skin and the core of the fibers are reported for a range of differently processed fibers for the first time. These results are shown to have implications for the mechanical properties of regenerated cellulose fibers. By applying tensile deformation to fiber bundles it is shown that the most misoriented samples undergo rapid decreases in the orientation parameter, which is an indication of crystal reorientation. However, the more highly oriented fibers undergo little reorientation. An average shear modulus for these fibers is determined by placing the data on a master curve and fitting with a model equation. By using another model for the fibers of low orientation and the shear modulus from the master curve analysis, it is shown that the deformation of less oriented fibers is dominated by shear between crystals, whereas the more oriented filaments are likely to undergo more significant chain deformation. By using a new model for fibers of low orientation, a parameter ksigma is introduced that gives the proportion of the fiber stress that is due to crystal shear. Systematic differences between this parameter for fibers of increasing initial orientation are reported. Moreover it is shown that the fibers of initially lower average orientation are governed by uniform strain, in agreement with the new model, whereas more highly oriented fibers deform under uniform stress. Furthermore, the model that we propose for misoriented domains and the use of a new factor dictating the proportion of shear stress may have general applications in materials engineering.     

Tensile deformation of bacterial cellulose composites

The polymeric basis for the mechanical properties of primary plant cell walls has been investigated by forming analogous composites based on fermentation of the bacterium Acetobacter xylinus, either alone or in the presence of xyloglucan or pectin. Simultaneous small-angle X-ray scattering and uniaxial deformation experiments has shown how the cellulose microfibrils reorient during deformation. Despite very different stress/strain curves, the reorientation behaviour is similar, regardless of the presence or absence of xyloglucan or pectin. A simple theory has been developed to predict the orientation behaviour. This is qualitatively similar to the measured behaviour, but differs quantitatively.     

Magnetic orientation of sphingomyelin-lecithin bilayers.

Phospholipid bilayers consisting of a 60:40 mixture of N-palmitoylsphingomyelin and dimyristoylphosphatidylcholine orient in a strong magnetic field. The orientation is easily observed in 31P- and 2H-nuclear magnetic resonance spectra where the intensity of the perpendicular edges of the powder lineshapes are enhanced. The lineshapes indicate that the long axis of the molecule is perpendicular to the magnetic field.     

Magnetite and magnetotaxis in microorganisms

Magnetotactic bacteria from freshwater and marine sediments orient and navigate along geomagnetic field lines. Their magnetotactic response is based on intracellular, single magnetic domains of ferrimagnetic magnetite, which impart a permanent magnetic dipole moment to the cell.     

Stochastic dynamics of magnetosomes and a mechanism of biological orientation in the geomagnetic field

The rotations of nanoscopic magnetic particles, magnetosomes, embedded into the cytoskeleton are considered. Under the influence of thermal disturbances, a great number of magnetosomes are shown to move chaotically between two stable equilibrium positions, in which their magnetic moments are neither parallel nor antiparallel to the static Earth's magnetic field (MF). The random rotations attain the value of order of a radian. The rate of the transitions and the probability of magnetosomes to be in the different states depend on the MF direction with respect to an averaged magnetosome's orientation. This effect explains the ability of migratory animals to orient themselves faultlessly in long term passages in the absence of the direct visibility of optical reference points. The sensitivity to deviation from an "ideal" orientation is estimated to be 2-4 degrees. Possible involvement of the stochastic dynamics of magnetosomes in biological magnetic navigation is discussed.     

Testing Magnetic Orientation in a Solitary Subterranean Rodent Ctenomys talarum (Rodentia: Octodontidae)

To test for the hypothesis that Ctenomys talarum can use the earth's magnetic field for spatial orientation, we carried out field and laboratory experiments to analyse if C. talarum burrows present any geomagnetic orientation in their natural habitat, if C. talarum show any spontaneous directional preference when starting to excavate their burrows and if this subterranean rodent is capable to use the earth's magnetic field to orient towards a goal in a complex maze. No correlation between the burrowing direction and the earth's magnetic field was found. We could not find any evidence for any spontaneous directional preference when starting to excavate the burrows in C. talarum. The change of the horizontal vector of the geomagnetic field did not affect the ability of this rodent to orient towards a goal in an artificial labyrinth. Explanations for these results and other possible mechanisms of orientation that could be used by C. talarum are discussed.     

Roles of Cellulose and Xyloglucan in Determining the Mechanical Properties of Primary Plant Cell Walls

The primary cell walls of growing and fleshy plant tissue mostly share a common set of molecular components, cellulose, xyloglucan (XyG), and pectin, that are required for both inherent strength and the ability to respond to cell expansion during growth. To probe molecular mechanisms underlying material properties, cell walls and analog composites from Acetobacter xylinus have been measured under small deformation and uniaxial extension conditions as a function of molecular composition. Small deformation oscillatory rheology shows a common frequency response for homogenized native cell walls, their sequential extraction residues, and bacterial cellulose alone. This behavior is characteristic of structuring via entanglement of cellulosic rods and is more important than cross-linking with XyG in determining shear moduli. Compared with cellulose alone, composites with XyG have lower stiffness and greater extensibility in uniaxial tension, despite being highly cross-linked at the molecular level. It is proposed that this is due to domains of cross-linked cellulose behaving as mechanical elements, whereas cellulose alone behaves as a mat of individual fibrils. The implication from this work is that XyG/cellulose networks provide a balance of extensibility and strength required by primary cell walls, which is not achievable with cellulose alone.     

Rotation of sickle cells in homogeneous magnetic fields.

Deoxygenated sickle cells (HbS) have been shown to orient in homogeneous magnetic fields because of magnetic anisotropy of the hemes. The time of rotation is proportional to 1/H2 and is in agreement with theory. Structural information concerning the orientation of HbS molecules in the fibers is obtained from these experiments and is shown to agree substantially with existing models.     

Magnetic Field Effect on Fresnel Coefficients of the Thin Slab of Graphite Nanocomposite

In this theoretical study, optical properties of a thin slab including graphite nanoparticles doped in a host medium such as silica and silicon have been investigated. A constant magnetic field is used for controlling Fresnel coefficients of the slab. Depending on the direction of the normal vector of the basal plane of the graphite structure with respect to the electric field of the incident electromagnetic wave (perpendicular or parallel), optical behavior of graphite is different. Electric permittivity of an individual magnetized graphite nanoparticle is calculated by a semi-empirical Drude-like model for both kinds of the normal vector of the basal plane orientation. By means of well-known Maxwell-Garnett theory, effective permittivity of the magnetized nanocomposite slab is obtained. It is shown that at the mid-IR frequency range, exerting a magnetic field of few hundred Tesla can lead to the substantial variations of Fresnel coefficients. Effect of the magnetic field on the optical properties of the slab is more evident when the population of the graphite nanoparticles with the parallel orientation of the basal plane is increased.

     

Fibroblasts retain their tissue phenotype when grown in three-dimensional collagen gels

Fibroblasts are responsible for the synthesis, assembly, deposition, and organization of extracellular matrix molecules, and thus determine the morphology of connective tissues. Deposition of matrix molecules occurs in extracellular compartments, where the sequential stages are under cellular control. Cell orientation/polarity is important in determining how the cell orients these extracytoplasmic compartments and therefore how the matrix is assembled and oriented. However, the control of cell orientation is not understood. Fibroblasts from three tissues with different morphologies were studied to determine whether cells maintained their characteristic phenotype. Fibroblasts from cornea, which in vivo are oriented in orthogonal layers along with their matrix; from tendon, a uniaxial connective tissue, where cells orient parallel to each other; and from dermis, a connective tissue with no apparent cellular orientation, were used to study cell morphology and orientation in three-dimensional collagen gels. The different cells were grown for 3 and 7 days in identical three-dimensional collagen gels with a nonoriented matrix. Confocal fluorescence microscopy demonstrated that corneal fibroblasts oriented perpendicular to one another at 3 days, and after 7 days in hydrated gels these cells formed orthogonal sheets. Tendon fibroblasts were shown by the same methods to orient parallel to one another in bundles at both 3 and 7 days, throughout the depth of the gel. Dermal fibroblasts showed no apparent orientation throughout the hydrated gels at either time point examined. The organization of these different cell types was consistent with their tissue of origin as was the cell structure and polarity. These studies imply that cellular and tissue phenotype is innate to differentiated fibroblasts and that these cells will orient in a tissue-specific manner regardless of the extracellular matrix present.