Thermodynamic description of oligonucleotide self-association in DNA concatamer structures

A scheme of equilibrium formation of concatamers by two different oligonucleotides has been considered. It is shown that in the general case, the dependence of the concentration of oligonucleotide components on temperature cannot be found in analytical form. Therefore, it is impossible to find the thermodynamic parameters of concatamer formation (ΔH ⁰, ΔS ⁰) and melting temperatures by analyzing the profiles of thermal denaturation of oligonucleotide complexes. An algorithm for numerical solution of implicit dependences has been developed. A number of approaches are considered that simplify the analysis of heat denaturation curves for concatamer complexes. It is shown that the dependence of the efficiency of concatamerization on temperature can be described analytically when duplex fragments have close stability and there is no cooperativity at the oligonucleotide junction. In this case, the dependence of melting temperature on thermodynamic parameters and oligonucleotide concentration has the same form as in the case of the duplex structure formed by a pair of non-self-complementary oligonucleotides. The ability of various model approaches to describe the experimental curves of concatamer heat denaturation is evaluated. For concatamer structures used as signal amplifiers in DNA hybridization analysis, a function is introduced that shows the relative contribution of a concatamer of given length to the magnitude of signal amplification. The dependence of the maximum of this function on the concentration of oligonucleotides, the thermodynamic characteristics of their complexes, and temperature has been determined. It is shown by the gel retardation assay that the function of the length distribution of concatamers qualitatively correlates with the experimental dependences.     

SEPON, a Selection and Evaluation Pipeline for OligoNucleotides based on ESTs with a non-target Tm algorithm for reducing cross-hybridization in microarray gene expression experiments

SEPON, Selection and Evaluation Pipeline for OligoNucleotide generates n-mer oligonucleotide sequences from expressed sequence tags of non-annotated genomes for microarray gene-expression profiling. A non-target melting temperature (T(m)) algorithm will reduce cross-hybridization by estimating T(m) of oligonucleotide hybridization to non-specific targets (non-target T(m)) and discard oligonucleotides with non-target T(m) estimate above user-defined threshold. SEPON allows user-defined filtering, predicts exon location, assigns penalty based on 3' distance, GC content, secondary structure T(m) and non-target T(m) and ranks oligonucleotides for optimal selection.     

Expression profiling by oligonucleotide microarrays spotted on coated polymer slides

We have developed a ready-to-spot polymer microarray slide, which is coated with a uniform layer of reactive electrophilic groups using anthraquinone-mediated photo-coupling chemistry. The slide coating reduces the hydrophobicity of the native polymer significantly, thereby enabling robust and efficient one-step coupling of spotted 5' amino-linked oligonucleotides onto the polymer slide. The utility of the coated polymer slide in gene expression profiling was assessed by fabrication of spotted oligonucleotide microarrays using a collection of 5' amino-linked 70-mer oligonucleotide probes representing 96 yeast genes from Operon. Two-colour hybridizations with labelled cDNA target pools derived from standard grown and heat-shocked wild type yeast cells could reproducibly measure heat shock induced expression of seven different heat shock protein (HSP) genes. Moreover, the observed fold changes were comparable to those reported previously using spotted cDNA arrays and high-density 25-mer oligonucleotide arrays from Affymetrix. The low hybridization signals obtained from the DeltaSSA4 mutant cDNA target, together with the high signal detected in two-colour hybridizations with heat-shocked wild type yeast relative to the DeltaSSA4 mutant strain implies that unspecific binding of cDNA target to the SSA4-specific 70-mer oligonucleotide probes is negligible. Combined, our results indicate that the coated polymer microarray slide represents a robust and cost-effective array platform for pre-spotted oligonucleotide arrays.     

A study of the relationships between oligonucleotide properties and hybridization signal intensities from NimbleGen microarray datasets

Well-defined relationships between oligonucleotide properties and hybridization signal intensities (HSI) can aid chip design, data normalization and true biological knowledge discovery. We clarify these relationships using the data from two microarray experiments containing over three million probes from 48 high-density chips. We find that melting temperature (T_m) has the most significant effect on HSI while length for the long oligonucleotides studied has very little effect. Analysis of positional effect using a linear model provides evidence that the protruding ends of probes contribute more than tethered ends to HSI, which is further validated by specifically designed match fragment sliding and extension experiments. The impact of sequence similarity (SeqS) on HSI is not significant in comparison with other oligonucleotide properties. Using regression and regression tree analysis, we prioritize these oligonucleotide properties based on their effects on HSI. The implications of our discoveries for the design of unbiased oligonucleotides are discussed. We propose that isothermal probes designed by varying the length is a viable strategy to reduce sequence bias, though imposing selection constraints on other oligonucleotide properties is also essential.     

OligoDesign: Optimal design of LNA (locked nucleic acid) oligonucleotide capture probes for gene expression profiling

We report the development of new software, OligoDesign, which provides optimal design of LNA (locked nucleic acid) substituted oligonucleotides for functional genomics applications. LNAs constitute a novel class of bicyclic RNA analogs having an exceptionally high affinity and specificity toward their complementary DNA and RNA target molecules. The OligoDesign software features recognition and filtering of the target sequence by genome-wide BLAST analysis in order to minimize cross-hybridization with non-target sequences. Furthermore it includes routines for prediction of melting temperature, self-annealing and secondary structure for LNA substituted oligonucleotides, as well as secondary structure prediction of the target nucleotide sequence. Individual scores for all these properties are calculated for each possible LNA oligonucleotide in the query gene and the OligoDesign program ranks the LNA capture probes according to a combined fuzzy logic score and finally returns the top scoring probes to the user in the output. We have successfully used the OligoDesign tool to design a Caenorhabditis elegans LNA oligonucleotide microarray, which allows monitoring of the expression of a set of 120 potential marker genes for a variety of stress and toxicological processes and toxicologically relevant pathways. The OligoDesign program is freely accessible at http://lnatools.com/.     

Strategies for signal amplification in nucleic acid detection

Many aspects of molecular genetics necessitate the detection of nucleic acid sequences. Current approaches involving target amplification (in situ PCR, Primed in situ Labeling, Self-Sustained Sequence Replication, Strand Displacement Amplification), probe amplification (Ligase Chain Reaction, Padlock Probes, Rolling Circle Amplification) and signal amplification (Tyramide Signal Amplification, Branched DNA Amplification) are summarized in the present review, together with their advantages and limitations.     

A method for fabricating uni-dsDNA microarray chip for analyzing DNA-binding proteins

This paper describes an approach for preparing unimolecular double-stranded DNA (uni-dsDNA) microarray chip. In this method, the various target oligonucleotides containing a reverse complementary sequence at 5' end were firstly annealed to a same universal oligonucleotide with amino group at 5' end and immobilized on aldehyde-derivatized glass slide. An on-chip DNA polymerization reaction was then performed to elongate the universal oligonucleotides. After a denaturation and a followed intra-strand annealing, a hairpin structure was formed at the free 3' end of the immobilized oligonucleotides. Finally, another on-chip DNA polymerization was done to synthesize the uni-dsDNA microarray. Combining with a PCR amplification of chemically synthesized target oligonucleotides, this method was much cost-effective for production of the uni-dsDNA microarray. The uni-dsDNA microarray was verified applicable for detecting the presence and monitoring the DNA-binding activity of the sequence-specific DNA-binding proteins.     

Current issues for DNA microarrays: platform comparison, double linear amplification, and universal RNA reference

DNA microarray technology has been widely used to simultaneously determine the expression levels of thousands of genes. A variety of approaches have been used, both in the implementation of this technology and in the analysis of the large amount of expression data. However, several practical issues still have not been resolved in a satisfactory manner, and among the most critical is the lack of agreement in the results obtained in different array platforms. In this study, we present a comparison of several microarray platforms [Affymetrix oligonucleotide arrays, custom complementary DNA (cDNA) arrays, and custom oligo arrays printed with oligonucleotides from three different sources] as well as analysis of various methods used for microarray target preparation and the reference design. The results indicate that the pairwise correlations of expression levels between platforms are relative low overall but that the log ratios of the highly expressed genes are strongly correlated, especially between Affymetrix and cDNA arrays. The microarray measurements were compared with quantitative real-time-polymerase chain reaction (QRT-PCR) results for 23 genes, and the varying degrees of agreement for each platform were characterized. We have also developed and tested a double amplification method which allows the use of smaller amounts of starting material. The added round of amplification produced reproducible results as compared to the arrays hybridized with single round amplified targets. Finally, the reliability of using a universal RNA reference for two-channel microarrays was tested and the results suggest that comparisons of multiple experimental conditions using the same control can be accurate.     

Impact of prehybridization PCR amplification on microarray detection of nitrifying bacteria in wastewater treatment plant samples

A gel-based microarray that included a set of 26 oligonucleotide probes targeting all nitrifying bacteria at varying levels of specificity suggested the presence of targeted microorganisms when hybridized to RNA isolated from a wastewater treatment plant, but could not discriminate between perfectly matched and mismatched sequences due in part to low signal intensity. To enhance sensitivity and improve discrimination, polymerase chain reaction was used to selectively amplify the 16S rRNA genes of specific nitrifier groups. RNA transcribed from these DNA templates was hybridized to the microarray and thermal dissociation analysis was used to characterize the specificity of hybridization. Amplification with Nitrospira-specific primers resulted in the selective amplification of this target group, confirmed by both a significant increase in signal intensity and a melting profile identical to the reference RNA. In contrast, Nitrobacter was not detected in the environmental samples with probe Nbac1000 despite pre-amplification with Nitrobacter-specific primers, indicating the absence of strains containing this Nitrobacter-specific sequence. Pre-amplification using primers specific for beta-Proteobacterial ammonia-oxidizing bacteria resulted in a significant increase in signal intensity for probe Nso190, but melting profiles for probe Nso190 showed a slight deviation between amplified RNA and the reference microorganism, suggesting that the amplification products contained some sequences that varied by a single nucleotide difference in the probe target region.     

Experimental and theoretical analysis of the invasive signal amplification reaction

The invasive signal amplification reaction is a sensitive method for single nucleotide polymorphism detection and quantitative determination of viral load and gene expression. The method requires the adjacent binding of upstream and downstream oligonucleotides to a target nucleic acid (either DNA or RNA) to form a specific substrate for the structure-specific 5' nucleases that cleave the downstream oligonucleotide to generate signal. By running the reaction at an elevated temperature, the downstream oligonucleotide cycles on and off the target leading to multiple cleavage events per target molecule without temperature cycling. We have examined the performance of the FEN1 enzymes from Archaeoglobus fulgidus and Methanococcus jannaschii and the DNA polymerase I homologues from Thermus aquaticus and Thermus thermophilus in the invasive signal amplification reaction. We find that the reaction has a distinct temperature optimum which increases with increasing length of the downstream oligonucleotide. Raising the concentration of either the downstream oligonucleotide or the enzyme increases the reaction rate. When the reaction is configured to cycle the upstream instead of the downstream oligonucleotide, only the FEN1 enzymes can support a high level of cleavage. To investigate the origin of the background signal generated during the invasive reaction, the cleavage rates for several nonspecific substrates that arise during the course of a reaction were measured and compared with the rate of the specific reaction. We find that the different 5' nuclease enzymes display a much greater variability in cleavage rates on the nonspecific substrates than on the specific substrate. The experimental data are compared with a theoretical model of the invasive signal amplification reaction.     

Monitoring expression profiles of Arabidopsis genes during cold acclimation and deacclimation using DNA microarrays

A comparative analysis of gene expression profiles during cold acclimation and deacclimation is necessary to elucidate the molecular mechanisms of cold stress responses in higher plants. We analyzed gene expression profiles in the process of cold acclimation and deacclimation (recovery from cold stress) using two microarray systems, the 7K RAFL cDNA microarray and the Agilent 22K oligonucleotide array. By both microarray analyses, we identified 292 genes up-regulated and 320 genes down-regulated during deacclimation, and 445 cold up-regulated genes and 341 cold down-regulated genes during cold acclimation. Many genes up-regulated during deacclimation were found to be down-regulated during cold acclimation, and vice versa. The genes up-regulated during deacclimation were classified into (1) regulatory proteins involved in further regulation of signal transduction and gene expression and (2) functional proteins involved in the recovery process from cold-stress-induced damages and plant growth. We also applied expression profiling studies to identify the key genes involved in the biosynthesis of carbohydrates and amino acids that are known to play important roles in cold acclimation. We compared genes that are regulated during deacclimation with those regulated during rehydration after dehydration to discuss the similarity and difference of each recovery process.Electronic Supplementary Material Supplementary materials are available for this article at     

The freshwater planarian Dugesia (G.) tigrina contains a great diversity of homeobox genes

To identify potential pattern control and cell determination and/or differentiation genes in the freshwater planarian Dugesial (G.) tigrina, we searched for homeobox genes of different types in the genome of this primitive metazoan. We applied two basic approaches: 1) Screening the cDNA library with degenerate oligonucleotides corresponding to the most conserved amino acid sequence from helix-3 of the homeodomain of each family; and 2) PCR amplification of genomic DNA or cDNA, using two sets of degenerated oligonucleotides corresponding to helices 1 and 3 of the homeodomain or two specific domains of the POU family. Using the first strategy we have identified and characterized two tissue-specific cell determination and/or differentiation NK-type homeobox genes. Using the second strategy we have identified several homeobox genes that belong to the HOM/Hox, paired (prd) or POU families.     

Synthesis and triplex-forming properties of cyclic oligonucleotides with (G,A)-antiparallel strands

Cyclic oligonucleotides carrying an oligopurine Watson-Crick sequence linked to the corresponding (G,A)- and (G,T)-antiparallel strands were prepared by nonenzymatic template-assisted cyclization of phosphorylated precursors. Cyclization was attempted using 3'-phosphate and 5'-phosphate linear precursors with carbodiimide or BrCN activation. The best results were obtained with the 5'-phosphorylated precursors and carbodiimide activation. Cyclic oligonucleotides bind polypyrimidine target sequence by formation of antiparallel triplexes. We have used UV and circular dichroism (CD) spectroscopy to analyze triplexes formed by cyclic oligonucleotides carrying G and A in the reverse-Hoogsteen strand. The relative stability of the triplexes formed by cyclic and linear oligonucleotides with a common polypyrimidine target was determined by melting experiments. The most-stable triplexes were formed by the cyclic oligonucleotide, followed by the unphosphorylated and phosphorylated oligonucleotide precursors, and, finally, the corresponding hairpin. Although the differences in binding affinity between cyclic oligonucleotides and their corresponding linear precursors are small, the use of cyclic oligonucleotides offers a clear advantage over conventional duplex recognition.     

Analysis of single nucleotide polymorphisms with solid phase invasive cleavage reactions

Using microparticles as the capture surface and fluorescence resonance energy transfer as the detection technology, we have demonstrated the feasibility of performing the invasive cleavage reaction on a solid phase. An effective tool for many genomic applications, the solution phase invasive cleavage assay is a signal amplification method capable of distinguishing nucleic acids that differ by only a single base mutation. The method positions two overlapping oligonucleotides, the probe and upstream oligonucleotides, on the target nucleic acid to create a complex recognized and cleaved by a structure-specific 5′-nuclease. For microarray and other multiplex applications, however, the method must be adapted to a solid phase platform. Effective cleavage of the probe oligonucleotide occurred when either of the two required overlapping oligonucleotides was configured as the particle-bound reagent and also when both oligonucleotides were attached to the solid phase. Positioning probe oligonucleotides away from the particle surface via long tethers improved both the signal and the reaction rates. The particle-based invasive cleavage reaction was capable of distinguishing the ApoE Cys158 and Arg158 alleles at target concentrations as low as 100 amol/assay (0.5 pM).     

Application and validation of DNA microarrays for the 16S rRNA-based analysis of marine bacterioplankton

An oligonucleotide probe-based DNA microarray was evaluated for its ability to detect 16S rRNA targets in marine bacterioplankton samples without prior amplification by polymerase chain reaction (PCR). The results obtained were compared with those of quantitative fluorescence in situ hybridization (FISH). For extraction and direct labelling of total RNA, a fast and efficient protocol based on commercially available kits was established. A set of redundant and hierarchically structured probes was applied, and specificity of hybridization was assessed by additional control oligonucleotides comprising single central mismatches. The protocol was initially tested by microarray analysis of bacterial pure cultures. Complete discrimination of all control oligonucleotides was achieved, indicating a high degree of hybridization specificity. In a co-culture, abundant members were detected by microarray analysis, but signal ratios of positive probes did not correlate well with quantitative data from FISH experiments. A marine picoplankton sample from the German Bight was analysed. Bacterial populations with relative abundances of at least 5% were detected by hybridizing 0.1 microg of total RNA extracted from a sample of 375 ml equivalent to 4.1 x 10(8) cells. Our results demonstrate that major populations of marine bacterioplankton can be identified by microarray analysis in a fast and reliable way, even in relatively low volumes of sea water.     

Array-based nano-amplification technique was applied in detection of hepatitis E virus

A rapid method for the detection of Hepatitis E Virus (HEV) was developed by utilizing nano-gold labeled oligonucleotide probes, silver stain enhancement and the microarray technique. The 5'-end -NH(2) modified oligonucleotide probes were immobilized on the surface of the chip base as the capture probe. The detection probe was made of the 3'-end -SH modified oligonucleotide probe and nano-gold colloid. The optimal concentrations of these two probes were determined. To test the detection sensitivity and specificity of this technique, a conservative fragment of the virus RNA was amplified by the RT-PCR/PCR one step amplification. The cDNA was hybridized with the capture probes and the detection probes on microarray. The detection signal was amplified by silver stain enhancement and could be identified by naked eyes.100 fM of amplicon could be detected out on the microarray. As the results, preparation of nano-gold was improved and faster. Development time also was shortened to 2 min. Thus, considering high efficiency, low cost, good specificity and high sensitivity, this technique is alternative for the detection of HEV.