I-TASSER server for protein 3D structure prediction

Background  

Prediction of 3-dimensional protein structures from amino acid sequences represents one of the most important problems in computational structural biology. The community-wide Critical Assessment of Structure Prediction (CASP) experiments have been designed to obtain an objective assessment of the state-of-the-art of the field, where I-TASSER was ranked as the best method in the server section of the recent 7th CASP experiment. Our laboratory has since then received numerous requests about the public availability of the I-TASSER algorithm and the usage of the I-TASSER predictions.     

Evaluation of 3D-Jury on CASP7 models

Background  

3D-Jury, the structure prediction consensus method publicly available in the Meta Server , was evaluated using models gathered in the 7 ^th round of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7). 3D-Jury is an automated expert process that generates protein structure meta-predictions from sets of models obtained from partner servers.     

Assessment of protein model structure accuracy estimation in CASP13: Challenges in the era of deep learning

Scoring model structure is an essential component of protein structure prediction that can affect the prediction accuracy tremendously. Users of protein structure prediction results also need to score models to select the best models for their application studies. In Critical Assessment of techniques for protein Structure Prediction (CASP), model accuracy estimation methods have been tested in a blind fashion by providing models submitted by the tertiary structure prediction servers for scoring. In CASP13, model accuracy estimation results were evaluated in terms of both global and local structure accuracy. Global structure accuracy estimation was evaluated by the quality of the models selected by the global structure scores and by the absolute estimates of the global scores. Residue-wise, local structure accuracy estimations were evaluated by three different measures. A new measure introduced in CASP13 evaluates the ability to predict inaccurately modeled regions that may be improved by refinement. An intensive comparative analysis on CASP13 and the previous CASPs revealed that the tertiary structure models generated by the CASP13 servers show very distinct features. Higher consensus toward models of higher global accuracy appeared even for free modeling targets, and many models of high global accuracy were not well optimized at the atomic level. This is related to the new technology in CASP13, deep learning for tertiary contact prediction. The tertiary model structures generated by deep learning pose a new challenge for EMA (estimation of model accuracy) method developers. Model accuracy estimation itself is also an area where deep learning can potentially have an impact, although current EMA methods have not fully explored that direction.     

Evaluation of the structural quality of modeled proteins by using globularity criteria

Background  

The knowledge of the three-dimensional structure of globular proteins is fundamental for a detailed investigation of their functional properties. Experimental methods are too slow for structure investigation on a large scale, while computational prediction methods offer alternatives that are continuously being improved. The international Comparative Assessment of Structure Prediction (CASP), an "a posteriori" evaluation of the quality of theoretical models when the experimental structure becomes available, demonstrates that predictions can be successful as well as unsuccessful, and this suggests the necessity for evaluations able to discard "a priori" the wrong models.     

Contact prediction in protein modeling: Scoring,folding and refinement of coarse-grained models

Background  

Several different methods for contact prediction succeeded within the Sixth Critical Assessment of Techniques for Protein Structure Prediction (CASP6). The most relevant were non-local contact predictions for targets from the most difficult categories: fold recognition-analogy and new fold. Such contacts could provide valuable structural information in case a template structure cannot be found in the PDB.     

Unsupervised Integration of Multiple Protein Disorder Predictors: The Method and Evaluation on CASP7, CASP8 and CASP9 Data

Background

Studies of intrinsically disordered proteins that lack a stable tertiary structure but still have important biological functions critically rely on computational methods that predict this property based on sequence information. Although a number of fairly successful models for prediction of protein disorder have been developed over the last decade, the quality of their predictions is limited by available cases of confirmed disorders.

Results

To more reliably estimate protein disorder from protein sequences, an iterative algorithm is proposed that integrates predictions of multiple disorder models without relying on any protein sequences with confirmed disorder annotation. The iterative method alternately provides the maximum a posterior (MAP) estimation of disorder prediction and the maximum-likelihood (ML) estimation of quality of multiple disorder predictors. Experiments on data used at CASP7, CASP8, and CASP9 have shown the effectiveness of the proposed algorithm.

Conclusions

The proposed algorithm can potentially be used to predict protein disorder and provide helpful suggestions on choosing suitable disorder predictors for unknown protein sequences.

     

QMEANclust: estimation of protein model quality by combining a composite scoring function with structural density information

Background  

The selection of the most accurate protein model from a set of alternatives is a crucial step in protein structure prediction both in template-based and ab initio approaches. Scoring functions have been developed which can either return a quality estimate for a single model or derive a score from the information contained in the ensemble of models for a given sequence. Local structural features occurring more frequently in the ensemble have a greater probability of being correct. Within the context of the CASP experiment, these so called consensus methods have been shown to perform considerably better in selecting good candidate models, but tend to fail if the best models are far from the dominant structural cluster. In this paper we show that model selection can be improved if both approaches are combined by pre-filtering the models used during the calculation of the structural consensus.     

Small angle X-ray scattering-assisted protein structure prediction in CASP13 and emergence of solution structure differences

Small angle X-ray scattering (SAXS) measures comprehensive distance information on a protein's structure, which can constrain and guide computational structure prediction algorithms. Here, we evaluate structure predictions of 11 monomeric and oligomeric proteins for which SAXS data were collected and provided to predictors in the 13th round of the Critical Assessment of protein Structure Prediction (CASP13). The category for SAXS-assisted predictions made gains in certain areas for CASP13 compared to CASP12. Improvements included higher quality data with size exclusion chromatography-SAXS (SEC-SAXS) and better selection of targets and communication of results by CASP organizers. In several cases, we can track improvements in model accuracy with use of SAXS data. For hard multimeric targets where regular folding algorithms were unsuccessful, SAXS data helped predictors to build models better resembling the global shape of the target. For most models, however, no significant improvement in model accuracy at the domain level was registered from use of SAXS data, when rigorously comparing SAXS-assisted models to the best regular server predictions. To promote future progress in this category, we identify successes, challenges, and opportunities for improved strategies in prediction, assessment, and communication of SAXS data to predictors. An important observation is that, for many targets, SAXS data were inconsistent with crystal structures, suggesting that these proteins adopt different conformation(s) in solution. This CASP13 result, if representative of PDB structures and future CASP targets, may have substantive implications for the structure training databases used for machine learning, CASP, and use of prediction models for biology.     

miREE: miRNA recognition elements ensemble

Background

The accurate prediction of ligand binding residues from amino acid sequences is important for the automated functional annotation of novel proteins. In the previous two CASP experiments, the most successful methods in the function prediction category were those which used structural superpositions of 3D models and related templates with bound ligands in order to identify putative contacting residues. However, whilst most of this prediction process can be automated, visual inspection and manual adjustments of parameters, such as the distance thresholds used for each target, have often been required to prevent over prediction. Here we describe a novel method FunFOLD, which uses an automatic approach for cluster identification and residue selection. The software provided can easily be integrated into existing fold recognition servers, requiring only a 3D model and list of templates as inputs. A simple web interface is also provided allowing access to non-expert users. The method has been benchmarked against the top servers and manual prediction groups tested at both CASP8 and CASP9.

Results

The FunFOLD method shows a significant improvement over the best available servers and is shown to be competitive with the top manual prediction groups that were tested at CASP8. The FunFOLD method is also competitive with both the top server and manual methods tested at CASP9. When tested using common subsets of targets, the predictions from FunFOLD are shown to achieve a significantly higher mean Matthews Correlation Coefficient (MCC) scores and Binding-site Distance Test (BDT) scores than all server methods that were tested at CASP8. Testing on the CASP9 set showed no statistically significant separation in performance between FunFOLD and the other top server groups tested.

Conclusions

The FunFOLD software is freely available as both a standalone package and a prediction server, providing competitive ligand binding site residue predictions for expert and non-expert users alike. The software provides a new fully automated approach for structure based function prediction using 3D models of proteins.     

MaxSub: an automated measure for the assessment of protein structure prediction quality

MOTIVATION: Evaluating the accuracy of predicted models is critical for assessing structure prediction methods. Because this problem is not trivial, a large number of different assessment measures have been proposed by various authors, and it has already become an active subfield of research (Moult et al. (1997,1999) and CAFASP (Fischer et al. 1999) prediction experiments have demonstrated that it has been difficult to choose one single, 'best' method to be used in the evaluation. Consequently, the CASP3 evaluation was carried out using an extensive set of especially developed numerical measures, coupled with human-expert intervention. As part of our efforts towards a higher level of automation in the structure prediction field, here we investigate the suitability of a fully automated, simple, objective, quantitative and reproducible method that can be used in the automatic assessment of models in the upcoming CAFASP2 experiment. Such a method should (a) produce one single number that measures the quality of a predicted model and (b) perform similarly to human-expert evaluations. RESULTS: MaxSub is a new and independently developed method that further builds and extends some of the evaluation methods introduced at CASP3. MaxSub aims at identifying the largest subset of C(alpha) atoms of a model that superimpose 'well' over the experimental structure, and produces a single normalized score that represents the quality of the model. Because there exists no evaluation method for assessment measures of predicted models, it is not easy to evaluate how good our new measure is. Even though an exact comparison of MaxSub and the CASP3 assessment is not straightforward, here we use a test-bed extracted from the CASP3 fold-recognition models. A rough qualitative comparison of the performance of MaxSub vis-a-vis the human-expert assessment carried out at CASP3 shows that there is a good agreement for the more accurate models and for the better predicting groups. As expected, some differences were observed among the medium to poor models and groups. Overall, the top six predicting groups ranked using the fully automated MaxSub are also the top six groups ranked at CASP3. We conclude that MaxSub is a suitable method for the automatic evaluation of models.     

Length-dependent prediction of protein intrinsic disorder

Background  

Due to the functional importance of intrinsically disordered proteins or protein regions, prediction of intrinsic protein disorder from amino acid sequence has become an area of active research as witnessed in the 6th experiment on Critical Assessment of Techniques for Protein Structure Prediction (CASP6). Since the initial work by Romero et al. (Identifying disordered regions in proteins from amino acid sequences, IEEE Int. Conf. Neural Netw., 1997), our group has developed several predictors optimized for long disordered regions (>30 residues) with prediction accuracy exceeding 85%. However, these predictors are less successful on short disordered regions (≤30 residues). A probable cause is a length-dependent amino acid compositions and sequence properties of disordered regions.     

Genetic Polymorphisms of the CASP8 Gene Promoter May Not Be Associated with Colorectal Cancer in Han Chinese from Southwest China

Purpose

Caspase 8 (CASP8) plays a critical role in the apoptotic pathway and aberrant regulation of this pathway causes many diseases including cancers. Genetic variants rs3834129 (CTTACT/−) and rs3769821 (T/C) in the promoter region of the CASP8 gene were documented to be associated with multiple solid cancers and non-Hodgkin’s lymphoma (NHL), respectively, despite of some controversies. We aimed to discern potential association of these two variants and rs113686495 (CTGTCATT/−), as well as CASP8 mRNA and protein expression levels with colorectal cancer (CRC) in Han Chinese.

Methods

We genotyped CASP8 genetic variants in 305 CRC patients and 342 healthy individuals from Kunming, Southwest China. Expression levels of CASP8 mRNA and protein were quantified in paired cancerous and paracancerous normal tissues by using real-time quantitative PCR and western blot, respectively. We compared the frequencies of alleles, genotypes, and haplotypes between the cases and controls. Correlation of CASP8 mRNA and protein expression levels in paired cancerous and paracancerous normal tissues from patients with different genotypes and clinical expression were also evaluated.

Results

There was no association of the CASP8 genetic variants with CRC in our case-control study. The CASP8 gene mRNA expression levels in cancerous and paracancerous normal tissues were similar and there was no significant difference between subjects with different genotypes and clinical features. However, we found that CASP8 protein level was significantly lower in cancerous tissues than in paired paracancerous normal tissues.

Conclusions

Our results suggest that the three CASP8 genetic variants may not be associated with CRC risk in Han Chinese from southwest China. Aberrant CASP8 protein expression may play a role in the pathogenesis of CRC.     

A simplified approach to disulfide connectivity prediction from protein sequences

Background  

Prediction of disulfide bridges from protein sequences is useful for characterizing structural and functional properties of proteins. Several methods based on different machine learning algorithms have been applied to solve this problem and public domain prediction services exist. These methods are however still potentially subject to significant improvements both in terms of prediction accuracy and overall architectural complexity.     

A comprehensive overview of computational protein disorder prediction methods

Over the past decade there has been a growing acknowledgement that a large proportion of proteins within most proteomes contain disordered regions. Disordered regions are segments of the protein chain which do not adopt a stable structure. Recognition of disordered regions in a protein is of great importance for protein structure prediction, protein structure determination and function annotation as these regions have a close relationship with protein expression and functionality. As a result, a great many protein disorder prediction methods have been developed so far. Here, we present an overview of current protein disorder prediction methods including an analysis of their advantages and shortcomings. In order to help users to select alternative tools under different circumstances, we also evaluate 23 disorder predictors on the benchmark data of the most recent round of the Critical Assessment of protein Structure Prediction (CASP) and assess their accuracy using several complementary measures.     

Structural basis of GC-1 selectivity for thyroid hormone receptor isoforms

Background

Multiple protein templates are commonly used in manual protein structure prediction. However, few automated algorithms of selecting and combining multiple templates are available.

Results

Here we develop an effective multi-template combination algorithm for protein comparative modeling. The algorithm selects templates according to the similarity significance of the alignments between template and target proteins. It combines the whole template-target alignments whose similarity significance score is close to that of the top template-target alignment within a threshold, whereas it only takes alignment fragments from a less similar template-target alignment that align with a sizable uncovered region of the target. We compare the algorithm with the traditional method of using a single top template on the 45 comparative modeling targets (i.e. easy template-based modeling targets) used in the seventh edition of Critical Assessment of Techniques for Protein Structure Prediction (CASP7). The multi-template combination algorithm improves the GDT-TS scores of predicted models by 6.8% on average. The statistical analysis shows that the improvement is significant (p-value < 10^-4). Compared with the ideal approach that always uses the best template, the multi-template approach yields only slightly better performance. During the CASP7 experiment, the preliminary implementation of the multi-template combination algorithm (FOLDpro) was ranked second among 67 servers in the category of high-accuracy structure prediction in terms of GDT-TS measure.

Conclusion

We have developed a novel multi-template algorithm to improve protein comparative modeling.     

An information measure of the quality of protein secondary structure prediction.

We describe an information-theory-based measure of the quality of secondary structure prediction (RELINFO). RELINFO has a simple yet intuitive interpretation: it represents the factor by which secondary structure choice at a residue has been restricted by a prediction scheme. As an alternative interpretation of secondary structure prediction, RELINFO complements currently used methods by providing an information-based view as to why a prediction succeeds and fails. To demonstrate this score's capabilities, we applied RELINFO to an analysis of a large set of secondary structure predictions obtained from the first five rounds of the Critical Assessment of Structure Prediction (CASP) experiment. RELINFO is compared with two other common measures: percent correct (Q3) and secondary structure overlap (SOV). While the correlation between Q3 and RELINFO is approximately 0.85, RELINFO avoids certain disadvantages of Q3, including overestimating the quality of a prediction. The correlation between SOV and RELINFO is approximately 0.75. The valuable SOV measure unfortunately suffers from a saturation problem, and perhaps has unfairly given the general impression that secondary structure prediction has reached its limit since SOV hasn't improved much over the recent rounds of CASP. Although not a replacement for SOV, RELINFO has greater dispersion. Over the five rounds of CASP assessed here, RELINFO shows that predictions targets have been more difficult in successive CASP experiments, yet the predictions quality has continued to improve measurably over each round. In terms of information, the secondary structure prediction quality has almost doubled from CASP1 to CASP5. Therefore, as a different perspective of accuracy, RELINFO can help to improve prediction of protein secondary structure by providing a measure of difficulty as well as final quality of a prediction.     

BioSuper: A web tool for the superimposition of biomolecules and assemblies with rotational symmetry

Background

Predicting protein structure from sequence is one of the most significant and challenging problems in bioinformatics. Numerous bioinformatics techniques and tools have been developed to tackle almost every aspect of protein structure prediction ranging from structural feature prediction, template identification and query-template alignment to structure sampling, model quality assessment, and model refinement. How to synergistically select, integrate and improve the strengths of the complementary techniques at each prediction stage and build a high-performance system is becoming a critical issue for constructing a successful, competitive protein structure predictor.

Results

Over the past several years, we have constructed a standalone protein structure prediction system MULTICOM that combines multiple sources of information and complementary methods at all five stages of the protein structure prediction process including template identification, template combination, model generation, model assessment, and model refinement. The system was blindly tested during the ninth Critical Assessment of Techniques for Protein Structure Prediction (CASP9) in 2010 and yielded very good performance. In addition to studying the overall performance on the CASP9 benchmark, we thoroughly investigated the performance and contributions of each component at each stage of prediction.

Conclusions

Our comprehensive and comparative study not only provides useful and practical insights about how to select, improve, and integrate complementary methods to build a cutting-edge protein structure prediction system but also identifies a few new sources of information that may help improve the design of a protein structure prediction system. Several components used in the MULTICOM system are available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/.     

A conformation ensemble approach to protein residue-residue contact

Background

Protein residue-residue contact prediction is important for protein model generation and model evaluation. Here we develop a conformation ensemble approach to improve residue-residue contact prediction. We collect a number of structural models stemming from a variety of methods and implementations. The various models capture slightly different conformations and contain complementary information which can be pooled together to capture recurrent, and therefore more likely, residue-residue contacts.

Results

We applied our conformation ensemble approach to free modeling targets from both CASP8 and CASP9. Given a diverse ensemble of models, the method is able to achieve accuracies of. 48 for the top L/5 medium range contacts and. 36 for the top L/5 long range contacts for CASP8 targets (L being the target domain length). When applied to targets from CASP9, the accuracies of the top L/5 medium and long range contact predictions were. 34 and. 30 respectively.

Conclusions

When operating on a moderately diverse ensemble of models, the conformation ensemble approach is an effective means to identify medium and long range residue-residue contacts. An immediate benefit of the method is that when tied with a scoring scheme, it can be used to successfully rank models.     

Horse bone marrow mesenchymal stem cells express embryo stem cell markers and show the ability for tenogenic differentiation by in vitro exposure to BMP-12

Background  

Mesenchymal stem cells (MSCs) have been recently investigated for their potential use in regenerative medicine. MSCs, in particular, have great potential, as in various reports they have shown pluripotency for differentiating into many different cell types. However, the ability of MSCs to differentiate into tendon cells in vitro has not been fully investigated.