The S-Layer Proteins of Two Bacillus stearothermophilus Wild-Type Strains Are Bound via Their N-Terminal Region to a Secondary Cell Wall Polymer of Identical Chemical Composition

Two Bacillus stearothermophilus wild-type strains were investigated regarding a common recognition and binding mechanism between the S-layer protein and the underlying cell envelope layer. The S-layer protein from B. stearothermophilus PV72/p6 has a molecular weight of 130,000 and assembles into a hexagonally ordered lattice. The S-layer from B. stearothermophilus ATCC 12980 shows oblique lattice symmetry and is composed of subunits with a molecular weight of 122,000. Immunoblotting, peptide mapping, N-terminal sequencing of the whole S-layer protein from B. stearothermophilus ATCC 12980 and of proteolytic cleavage fragments, and comparison with the S-layer protein from B. stearothermophilus PV72/p6 revealed that the two S-layer proteins have identical N-terminal regions but no other extended structurally homologous domains. In contrast to the heterogeneity observed for the S-layer proteins, the secondary cell wall polymer isolated from peptidoglycan-containing sacculi of the different strains showed identical chemical compositions and comparable molecular weights. The S-layer proteins could bind and recrystallize into the appropriate lattice type on native peptidoglycan-containing sacculi from both organisms but not on those extracted with hydrofluoric acid, leading to peptidoglycan of the A1γ chemotype. Affinity studies showed that only proteolytic cleavage fragments possessing the complete N terminus of the mature S-layer proteins recognized native peptidoglycan-containing sacculi as binding sites or could associate with the isolated secondary cell wall polymer, while proteolytic cleavage fragments missing the N-terminal region remained unbound. From the results obtained in this study, it can be concluded that S-layer proteins from B. stearothermophilus wild-type strains possess an identical N-terminal region which is responsible for anchoring the S-layer subunits to a secondary cell wall polymer of identical chemical composition.     

An S-layer heavy chain camel antibody fusion protein for generation of a nanopatterned sensing layer to detect the prostate-specific antigen by surface plasmon resonance technology

The bacterial cell surface layer (S-layer) protein of Bacillus sphaericus CCM 2177 assembles into a square lattice structure and recognizes a distinct type of secondary cell wall polymer (SCWP) as the proper anchoring structure in the rigid cell wall layer. For generating a nanopatterned sensing layer with high density and well defined distance of the ligand on the outermost surface, an S-layer fusion protein incorporating the sequence of a variable domain of a heavy chain camel antibody directed against prostate-specific antigen (PSA) was constructed, produced, and recrystallized on gold chips precoated with thiolated SCWP. The S-layer protein moiety consisted of the N-terminal part which specifically recognized the SCWP as binding site and the self-assembly domain. The PSA-specific variable domain of the camel heavy chain antibody was selected by several rounds of panning from a phage display library of an immunized dromedary, and was produced by heterologous expression in Escherichia coli. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-PSA-N7. The S-layer fusion protein had retained the ability to self-assemble into the square lattice structure. According to the selected fusion site in the SbpA sequence, the cAb-PSA-N7 moiety remained located on the outer surface of the protein lattice. After recrystallization of the S-layer fusion protein on gold chips precoated with thiolated SCWP, the monomolecular protein lattice was exploited as sensing layer in surface plasmon resonance biochips to detect PSA.     

Localized insertion of new S-layer during growth of Bacillus stearothermophilus strains

Bacillus stearothermophilus strains PV 72 and ATCC 12980 carry a crystalline surface layer (S-layer) with hexagonal (p6) and oblique (p2) symmetry, respectively. Sites of insertions of new subunits into the regular lattice during cell growth have been determined by the indirect fluorescent antibody technique and the protein A/colloidal gold technique.During S-layer growth on both bacillus strains the following common features were noted: 1. shedding of intact S-layer or turnover of individual subunits was not seen; 2. new S-layer was deposited in helically-arranged bands over the cylindrical surface of the cell at a pitch angle related to the orientation of the lattice vectors of the crystalline array; 3. little or no S-layer was inserted into pre-existing S-layer at the poles, and 4. septal regions and, subsequently, newly formed cell poles were covered with new S-layer protein.     

Regulation of S-layer protein synthesis of Bacillus stearothermophilus PV72 through variation of continuous cultivation conditions

The crystalline cell surface layer (S-layer) of Bacillus stearothermophilus PV72 shows hexagonal lattice symmetry and is composed of a single protein species with a molecular weight of 130000. For investigating the regulation of S-layer protein synthesis, Bacillus stearothermophilus PV72 was grown in continuous culture on synthetic PVIII- medium with glucose as carbon source at constant dilution rate of 0.3 h⁻¹ at 57 ° C under different conditions and limitations. A complete outer S-layer and an S-layer protein pool sufficient for formation of about 70% inner S-layer was produced under carbon-limited growth. The inner S-layer results from an S-layer protein pool stored in the peptidoglycan-containing layer of whole cells which can emerge and assemble on the inner face of the rigid cell wall layer during the cell wall preparation procedure. Under oxygen-limited growth, only a complete outer S-layer but no S-layer protein pool was synthesized. Reduction of the methionine concentration of PVIII-medium from 100 to 10 mg l⁻¹ led to a clear decrease in S-layer protein production and to an incomplete outer S-layer. During growth in the presence of excess glucose, S-layer protein synthesis was replaced by that of an exopolysaccharide matrix. After changing to carbon limitation again, the original level of S-layer protein synthesis was achieved after only four volume exchanges. Feeding of casein hydrolysate or aromatic or basic amino acids to the continuous culture induced an irreversible loss of S-layer protein synthesis after from five to ten volume exchanges. In contrast, addition of Gly, Ala, Val, Leu, Ile, Glu, Gln, Asp, Asn, Ser and Thr in different mixtures could significantly stimulate S-layer protein production.     

Cell surface display of chimeric glycoproteins via the S-layer of Paenibacillus alvei

The Gram-positive, mesophilic bacterium Paenibacillus alvei CCM 2051^T possesses a two-dimensional crystalline protein surface layer (S-layer) with oblique lattice symmetry composed of a single type of O-glycoprotein species. Herein, we describe a strategy for nanopatterned in vivo cell surface co-display of peptide and glycan epitopes based on this S-layer glycoprotein self-assembly system. The open reading frame of the corresponding structural gene spaA codes for a protein of 983 amino acids, including a signal peptide of 24 amino acids. The mature S-layer protein has a theoretical molecular mass of 105.95 kDa and a calculated pI of 5.83. It contains three S-layer homology domains at the N-terminus that are involved in anchoring of the glycoprotein via a non-classical, pyruvylated secondary cell wall polymer to the peptidoglycan layer of the cell wall. For this polymer, several putative biosynthesis enzymes were identified upstream of the spaA gene. For in vivo cell surface display, the hexahistidine tag and the enhanced green fluorescent protein, respectively, were translationally fused to the C-terminus of SpaA. Immunoblot analysis, immunofluorescence staining, and fluorescence microscopy revealed that the fused epitopes were efficiently expressed and successfully displayed via the S-layer glycoprotein matrix on the surface of P. alvei CCM 2051^T cells. In contrast, exclusively non-glycosylated chimeric SpaA proteins were displayed, when the S-layer of the glycosylation-deficient wsfP mutant was used as a display matrix.     

The tetragonal surface layer of Clostridium aceticum: three-dimensional structure and comparison with the hexagonal layer of Clostridium thermohydrosulfuricum

The regular surface layer (S-layer) of Clostridium aceticum has been isolated and the three-dimensional structure determined to a resolution of 2.0 nm from tilt series of negatively stained preparations. It has tetragonal symmetry with a lattice constant of 12 nm and a thickness of 6 nm; there are probably 4 protein monomers per unit cell. A large proportion of the protein is concentrated in massive "cores" at the major four-fold axes which are situated towards the inner surface of the layer. From these cores, delicate arms extend towards the minor four-fold axes, where secondary connectivity is established near the exterior surface. When viewed from the outside, each of the cores appears to have a large central depression, rather than a true "pore". Since this general pattern of mass distribution is shared by the hexagonal S-layer of Clostridium thermohydrosulfuricum, some consideration has been given to the possible evolutionary steps leading to changes in symmetry. From modelling experiments, it is evident that the change from four-fold to six-fold symmetry in this instance could be accomplished simply by the loss of a structural "domain" from the protomer.     

Structural analysis of the S-Layer of Lampropedia hyalina

The two-dimensional (2D) structure of the regularly structured surface layer (S-layer) of the gram-negative eubacterium Lampropedia hyalina has been determined at the molecular level to a nominal resolution of 2.1 nm by transmission electron microscopy and digital image processing. The inner, or “perforate,” layer consists of dimeric block-shaped units located at two-fold symmetry axes. These morphological dimers associate around three-fold symmetry axes to form a continuous layer with p6 symmetry and a lattice constant of 14.6 ± 0.4 nm. Scanning transmission electron microscopy (STEM) yields a mass-per-area (MPA) value for the perforate layer of 3.5 kDa/nm². The outer, or “punctate,” layer is composed of long, roughly cylindrical units centered on six-fold symmetry axes, which are connected by six fine linking arms joining at the three-fold symmetry axes to create a hexagonal layer with a lattice constant of 25.6 ± 0.5 nm. The MPA of the “composite”-i.e., perforate plus punctate—layer is 10.2 kDa/nm².     

Molecular Characterization of the S-Layer Gene, sbpA, of Bacillus sphaericus CCM 2177 and Production of a Functional S-Layer Fusion Protein with the Ability To Recrystallize in a Defined Orientation while Presenting the Fused Allergen

The nucleotide sequence encoding the crystalline bacterial cell surface (S-layer) protein SbpA of Bacillus sphaericus CCM 2177 was determined by a PCR-based technique using four overlapping fragments. The entire sbpA sequence indicated one open reading frame of 3,804 bp encoding a protein of 1,268 amino acids with a theoretical molecular mass of 132,062 Da and a calculated isoelectric point of 4.69. The N-terminal part of SbpA, which is involved in anchoring the S-layer subunits via a distinct type of secondary cell wall polymer to the rigid cell wall layer, comprises three S-layer-homologous motifs. For screening of amino acid positions located on the outer surface of the square S-layer lattice, the sequence encoding Strep-tag I, showing affinity to streptavidin, was linked to the 5′ end of the sequence encoding the recombinant S-layer protein (rSbpA) or a C-terminally truncated form (rSbpA_31-1068). The deletion of 200 C-terminal amino acids did not interfere with the self-assembly properties of the S-layer protein but significantly increased the accessibility of Strep-tag I. Thus, the sequence encoding the major birch pollen allergen (Bet v1) was fused via a short linker to the sequence encoding the C-terminally truncated form rSpbA_31-1068. Labeling of the square S-layer lattice formed by recrystallization of rSbpA_31-1068/Bet v1 on peptidoglycan-containing sacculi with a Bet v1-specific monoclonal mouse antibody demonstrated the functionality of the fused protein sequence and its location on the outer surface of the S-layer lattice. The specific interactions between the N-terminal part of SbpA and the secondary cell wall polymer will be exploited for an oriented binding of the S-layer fusion protein on solid supports to generate regularly structured functional protein lattices.     

Hyaluronic acid: molecular conformations and interactions in two sodium salts.

A detailed structure for the tetragonal form (a = b = 0.989 nm, c, fibre axis, = 3.394 nm) of sodium hyaluronate has been obtained by analysing X-ray fibre diffraction data using new molecular modelling techniques. Two polysaccharide chains pass through each unit cell, one at the corner and one at the centre. The chains are anti-parallel to one another. Each chain is a left-handed, 4-fold helix of disaccharide units. There are intramolecular hydrogen bonds stabilising each glycosidic linkage. Octahedrally co-ordinated sodium ions link, by O … Na⁺ … O bridges, neighbouring polysaccharide chains that are further linked by hydrogen bonds. No double-helix model (as originally proposed for this structure) has been found to be free of unacceptable non-bonded contacts or to fit the diffraction intensities as closely.The tetragonal form, which is stable at zero relative humidity, contains no detectable water molecules. At higher relative humidities a related orthorhombic form is observed in which only the a dimension of the lattice is different (a = 1.153 nm, b = 0.989 nm, c = 3.386 nm). In this form the hyaluronate helix is 2-fold with tetrasaccharide units conformationally similar to the 4-fold helix of the tetragonal form. The Na⁺ … O binding and hydrogen bonds lost on expansion of the tetragonal lattice are all replaced in the orthorhombic structure by bridges through water molecules, four of which associated with each tetrasaccharide.     

Three-dimensional arrangement of the cell wall protein of Sulfolobus acidocaldarius

The three-dimensional structure of the S-layer that surrounds the bacterium Sulfolobus acidocaldarius is described in detail. Pieces of the S-layer, which are two-dimensional crystals with p6 symmetry, have been studied by crystallographic analysis of electron micrographs of tilted specimens. In the density map, each asymmetric unit appears to consist of several domains connected by strong hinges. On the basis of the ragged appearance of the structure at torn edges, we now suggest that the single species of polypeptide is in a highly extended conformation, with much overlap between different molecules, and show how such molecules might be weaved together to produce the morphological domains. We show that the closed surface lattice of the intact cell wall contains 5-fold and 7-fold vertices and show how the subunit structure appears to be well suited to form 5-fold and 7-fold symmetric rings at these points in place of the 6-fold rings of the hexagonal lattice.     

Three-dimensional structure of the regular surface glycoprotein layer of Halobacterium volcanii from the Dead Sea

A three-dimensional reconstruction from electron micrographs of negatively stained cell envelopes of Halobacterium volcanii has revealed the structure of the surface glycoprotein to a resolution of 2 nm. The glycoprotein is arranged on a p6 lattice with a lattice constant of 16.8 nm. It forms 4.5 nm high, dome-shaped, morphological complexes with a narrow pore at the apex opening into a `funnel' towards the cell membrane. The polarity of the structure was derived from freeze-etching experiments and `edge' views. Six radial protrusions emanate from each morphological complex and join around the 3-fold axis to provide lateral connectivity. Using the primary structure of the surface glycoprotein of the closely related species Halobacterium halobium (Lechner and Sumper, 1987) and the cell envelope profile from a previous X-ray analysis of the same species (Blaurock et al., 1976) we have integrated our reconstruction into a model of halobacterial cell envelope.     

Cell wall of Thermoanaerobacterium thermosulfurigenes EM1: isolation of its components and attachment of the xylanase XynA

Thermoanaerobacterium thermosulfurigenes EM1 has a gram-positive type cell wall completely covered by a surface layer (S-layer) with hexagonal lattice symmetry. The components of the cell envelope were isolated, and the S-layer protein was purified and characterized. S-layer monomers assembled in vitro into sheets with the same hexagonal symmetry as in vivo. Monosaccharide analysis revealed that the S-layer is associated with fucose, rhamnose, mannosamine, glucosamine, galactose, and glucose. The N-terminal 31 amino acid residues of the S-layer protein showed significant similarity to SLH (S-layer homology) domains found in S-layer proteins of different bacteria and in the exocellular enzymes pullulanase, polygalacturonate hydrolase, and xylanase of T. thermosulfurigenes EM1. The xylanase from T. thermosulfurigenes EM1 was copurified with the S-layer protein during isolation of cell wall components. Since SLH domains of some structural proteins have been shown to anchor these proteins noncovalently to the cell envelope, we propose a common anchoring mechanism for the S-layer protein and exocellular enzymes via their SLH domains in the peptidoglycan-containing layer of T. thermosulfurigenes EM1. Received: 23 October 1998 / Accepted: 21 December 1998     

Generation of a functional monomolecular protein lattice consisting of an s-layer fusion protein comprising the variable domain of a camel heavy chain antibody

Crystalline bacterial cell surface layer (S-layer) proteins are composed of a single protein or glycoprotein species. Isolated S-layer subunits frequently recrystallize into monomolecular protein lattices on various types of solid supports. For generating a functional protein lattice, a chimeric protein was constructed, which comprised the secondary cell wall polymer-binding region and the self-assembly domain of the S-layer protein SbpA from Bacillus sphaericus CCM 2177, and a single variable region of a heavy chain camel antibody (cAb-Lys3) recognizing lysozyme as antigen. For construction of the S-layer fusion protein, the 3'-end of the sequence encoding the C-terminally truncated form rSbpA(31)(-)(1068) was fused via a short linker to the 5'-end of the sequence encoding cAb-Lys3. The functionality of the fused cAb-Lys3 in the S-layer fusion protein was proved by surface plasmon resonance measurements. Dot blot assays revealed that the accessibility of the fused functional sequence for the antigen was independent of the use of soluble or assembled S-layer fusion protein. Recrystallization of the S-layer fusion protein into the square lattice structure was observed on peptidoglycan-containing sacculi of B. sphaericus CCM 2177, on polystyrene or on gold chips precoated with thiolated secondary cell wall polymer, which is the natural anchoring molecule for the S-layer protein in the bacterial cell wall. Thereby, the fused cAb-Lys3 remained located on the outer S-layer surface and accessible for lysozyme binding. Together with solid supports precoated with secondary cell wall polymers, S-layer fusion proteins comprising rSbpA(31)(-)(1068) and cAbs directed against various antigens shall be exploited for building up monomolecular functional protein lattices as required for applications in nanobiotechnology.     

Analysis of the cell surface layer ultrastructure of the oral pathogen Tannerella forsythia

The Gram-negative oral pathogen Tannerella forsythia is decorated with a 2D crystalline surface (S-) layer, with two different S-layer glycoprotein species being present. Prompted by the predicted virulence potential of the S-layer, this study focused on the analysis of the arrangement of the individual S-layer glycoproteins by a combination of microscopic, genetic, and biochemical analyses. The two S-layer genes are transcribed into mRNA and expressed into protein in equal amounts. The S-layer was investigated on intact bacterial cells by transmission electron microscopy, by immune fluorescence microscopy, and by atomic force microscopy. The analyses of wild-type cells revealed a distinct square S-layer lattice with an overall lattice constant of 10.1?±?0.7?nm. In contrast, a blurred lattice with a lattice constant of 9.0?nm was found on S-layer single-mutant cells. This together with in vitro self-assembly studies using purified (glyco)protein species indicated their increased structural flexibility after self-assembly and/or impaired self-assembly capability. In conjunction with TEM analyses of thin-sectioned cells, this study demonstrates the unusual case that two S-layer glycoproteins are co-assembled into a single S-layer. Additionally, flagella and pilus-like structures were observed on T. forsythia cells, which might impact the pathogenicity of this bacterium.     

The sll1951 Gene Encodes the Surface Layer Protein of Synechocystis sp. Strain PCC 6803

Sll1951 is the surface layer (S-layer) protein of the cyanobacterium Synechocystis sp. strain PCC 6803. This large, hemolysin-like protein was found in the supernatant of a strain that was deficient in S-layer attachment. An sll1951 deletion mutation was introduced into Synechocystis and was easily segregated to homozygosity under laboratory conditions. By thin-section and negative-stain transmission electron microscopy, a ∼30-nm-wide S-layer lattice covering the cell surface was readily visible in wild-type cells but was absent in the Δsll1951 strain. Instead, the Δsll1951 strain displayed a smooth lipopolysaccharide surface as its most peripheral layer. In the presence of chaotropic agents, the wild type released a large (>150-kDa) protein into the medium that was identified as Sll1951 by mass spectrometry of trypsin fragments; this protein was missing in the Δsll1951 strain. In addition, Sll1951 was prominent in crude extracts of the wild type, indicating that it is an abundant protein. The carotenoid composition of the cell wall fraction of the Δsll1951 strain was similar to that of the wild type, suggesting that the S-layer does not contribute to carotenoid binding. Although the photoautotrophic growth rate of the Δsll1951 strain was similar to that of the wild-type strain, the viability of the Δsll1951 strain was reduced upon exposure to lysozyme treatment and hypo-osmotic stress, indicating a contribution of the S-layer to the integrity of the Synechocystis cell wall. This work identifies the S-layer protein in Synechocystis and shows that, at least under laboratory conditions, this very abundant, large protein has a supportive but not a critical role in the function of the cyanobacterium.     

Bacterial and Archaeal S-Layers as a Subject of Nanobiotechnology

Many bacteria and archaea have a crystalline surface layer (S-layer), which overlies the cell envelope. S-layers each consist of one protein or glycoprotein species. Protein subunits of the S-layer noncovalently interact with each other and with the underlying cell-envelope component. On average, the S-layer lattice has pores of 2–6 nm and is 5–10 nm high. Isolated S-layer proteins recrystallize to form two-dimensional crystalline structures in solution, on a solid support, and on planar lipid membranes. Owing to this unique property, S-layers have a broad range of applications. This review focuses on the structural features and applications of S-layers and their proteins, with special emphasis on their use in nanobiotechnology.     

Analysis of the surface proteins of <Emphasis Type="Italic">Acidithiobacillus ferrooxidans</Emphasis> strain SP5/1 and the new,pyrite-oxidizing <Emphasis Type="Italic">Acidithiobacillus</Emphasis> isolate HV2/2, and their possible involvement in pyrite oxidation

Two strains of rod-shaped, pyrite-oxidizing acidithiobacilli, their cell envelope structure and their interaction with pyrite were investigated in this study. Cells of both strains, Acidithiobacillus ferrooxidans strain SP5/1 and the moderately thermophilic Acidithiobacillus sp. strain HV2/2, were similar in size, with slight variations in length and diameter. Two kinds of cell appendages were observed: flagella and pili. Besides a typical Gram-negative cell architecture with inner and outer membrane, enclosing a periplasm, both strains were covered by a hitherto undescribed, regularly arranged 2-D protein crystal with p2-symmetry. In A. ferrooxidans, this protein forms a stripe-like structure on the surface. A similar surface pattern with almost identical lattice vectors was also seen on the cells of strain HV2/2. For the surface layer of both bacteria, a direct contact to pyrite crystals was observed in ultrathin sections, indicating that the S-layer is involved in maintaining this contact site. Observations on an S-layer-deficient strain show, however, that cell adhesion does not strictly depend on the presence of the S-layer and that this surface protein has an influence on cell shape. Furthermore, the presented data suggest the ability of the S-layer protein to complex Fe³⁺ ions, suggesting a role in the physiology of the microorganisms.     

S-Layered Aneurinibacillus and Bacillus spp. Are Susceptible to the Lytic Action of Pseudomonas aeruginosa Membrane Vesicles

When S-layered strains of Bacillus stearothermophilus and Aneurinibacillus thermoaerophilus, possessing S-layers of different lattice type and lattice constant as well as S-(glyco)protein chemistry, and isogenic S-layerless variants were subjected to membrane vesicles (MVs) from P. aeruginosa during plaque assays on plates or CFU measurements on cell suspensions, all bacterial types lysed. Electron microscopy of negative stains, thin sections, and immunogold-labelled MV preparations revealed that the vesicles adhered to all bacterial surfaces, broke open, and digested the underlying peptidoglycan-containing cell wall of all cell types. Reassembled S-layer did not appear to be affected by MVs, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that the S-(glyco)proteins remained intact. meso-Diaminopimelic acid, as a peptidoglycan breakdown product, was found in all culture supernatants after MV attack. These results suggest that even though MVs are much larger than the channels which penetrate these proteinaceous arrays, S-layers on gram-positive bacteria do not form a defensive barrier against the lytic action of MVs. The primary mode of attack is by the liberation from the MVs of a peptidoglycan hydrolase, which penetrates through the S-layer to digest the underlying peptidoglycan-containing cell wall. The S-layer is not affected by MV protease.