Mutation detection by electrocatalysis at DNA-modified electrodes

Detection of mutations and damaged DNA bases is important for the early diagnosis of genetic disease. Here we describe an electrocatalytic method for the detection of single-base mismatches as well as DNA base lesions in fully hybridized duplexes, based on charge transport through DNA films. Gold electrodes modified with preassembled DNA duplexes are used to monitor the electrocatalytic signal of methylene blue, a redox-active DNA intercalator, coupled to [Fe(CN)6]3-. The presence of mismatched or damaged DNA bases substantially diminishes the electrocatalytic signal. Because this assay is not a measure of differential hybridization, all single-base mismatches, including thermodynamically stable GT and GA mismatches, can be detected without stringent hybridization conditions. Furthermore, many common DNA lesions and "hot spot" mutations in the human p53 genome can be distinguished from perfect duplexes. Finally, we have demonstrated the application of this technology in a chip-based format. This system provides a sensitive method for probing the integrity of DNA sequences and a completely new approach to single-base mismatch detection.     

Electrochemistry at DNA-modified surfaces: new probes for charge transport through the double helix

Electrochemistry at DNA-modified surfaces provides an alternative approach to photochemistry or radiation biology for studying charge migration through the double helix. Using short duplexes self-assembled onto gold, electrochemical reduction of redox-active reporter molecules has been observed through DNA films more than 50 A thick, with heterogeneous rate constants as great as approximately 100 s(-1). Though apparently insensitive to base content and sequence, even small distortions in the electronic structure of the pi-stack (caused, for example, by single-base mismatches and other DNA lesions) attenuate the rate of electron transport. Understanding the role of conformational dynamics within the double helix, as well as the cooperative effects of self-assembling individual duplexes into ordered superlattices remain important challenges for theory and experiment.     

Electrochemical DNA biosensors based on thin gold films sputtered on capacitive nanoporous niobium oxide

Electrochemical DNA biosensors based on a thin gold film sputtered on anodic porous niobium oxide (Au@Nb(2)O(5)) are studied in detail here. We found that the novel DNA biosensor based on Au@Nb(2)O(5) is superior to those based on the bulk gold electrode or niobium oxide electrode. For example, the novel method does not require any time-consuming cleaning step in order to obtain reproducible results. The adhesion of gold films on the substrate is very stable during electrochemical biosensing, when the thin gold films are deposited on anodically prepared nanoporous niobium oxide. In particular, the novel biosensor shows enhanced biosensing performance with a 2.4 times higher resolution and a three times higher sensitivity. The signal enhancement is in part attributed to capacitive interface between gold films and nanoporous niobium oxide, where charges are accumulated during the anodic and cathodic scanning, and is in part ascribed to the structural stability of DNA immobilized at the sputtered gold films. The method allows for the detection of single-base mismatch DNA as well as for the discrimination of mismatch positions.     

Detection of single-base mismatch at distal end of DNA duplex by electrochemical impedance spectroscopy

Herein, we report an anomalous electrochemical behavior of surface-bound DNA duplex that has single-base mismatches at its distal end. Single-stranded 15-base DNA was immobilized at its 5'end onto gold electrode surfaces. After hybridization with complementary or mismatched DNA, electrochemical impedance spectra were obtained using [Fe(CN)(6)]3-/4- as redox marker ions. Hybridization with the complementary DNA reduced the charge-transfer resistance (R(CT)), whereas single-base mismatches at the distal end of the duplex largely increased the R(CT). This anomaly was found only with the distal end: the increase in R(CT) was not observed for mismatches at either the middle or the proximal end. These results indicate that electrochemical detection of single-base alterations at an end of sample DNA is exceptionally easy because of the diametrically opposite responses. This detection principle is promising for the typing of single-nucleotide polymorphisms in combination with the single-base primer extension protocol.     

DNA-mediated electrochemistry

The base pair stack of DNA has been demonstrated as a medium for long-range charge transport chemistry both in solution and at DNA-modified surfaces. This chemistry is exquisitely sensitive to structural perturbations in the base pair stack as occur with lesions, single base mismatches, and protein binding. We have exploited this sensitivity for the development of reliable electrochemical assays based on DNA charge transport at self-assembled DNA monolayers. Here, we discuss the characteristic features, applications, and advantages of DNA-mediated electrochemistry.     

Kinetics of charge transfer in DNA containing a mismatch

Charge transfer (CT) in DNA offers a unique approach for the detection of a single-base mismatch in a DNA molecule. While the single-base mismatch would significantly affect the CT in DNA, the kinetic basis for the drastic decrease in the CT efficiency through DNA containing mismatches still remains unclear. Recently, we determined the rate constants of the CT through the fully matched DNA, and we can now estimate the CT rate constant for a certain fully matched sequence. We assumed that further elucidating of the kinetics in mismatched sequences can lead to the discrimination of the DNA single-base mismatch based on the kinetics. In this study, we investigated the detailed kinetics of the CT through DNA containing mismatches and tried to discriminate a mismatch sequence based on the kinetics of the CT in DNA containing a mismatch.     

2'-anthraquinone-conjugated oligonucleotide as an electrochemical probe for DNA mismatch

We previously prepared the oligonucleotides (ODNs) conjugated to an anthraquinone (AQ) group via one carbon linker at the 2'-sugar position. When these modified ODNs bind to cDNA sequences, the AQ moiety can be intercalated into the predetermined base-pair pocket of a duplex DNA. In this paper, 2'-AQ-modified ODNs are shown to be an excellent electrochemical probe to clarify the effect of a mismatch base on the charge transfer (CT) though DNA. Two types of DNA-modified electrodes were constructed by assembly of disulfide-terminated 2'-AQ-ODN duplexes onto gold electrodes. One type of electrodes (system I) contains fully matched base pairs or a single-base mismatch in duplex DNA between the redox center and the electrode. The other (system II) consists of the mismatch but at the outside of the redox center. The modified electrodes were analyzed by cyclic voltammetry to estimate the CT rate through duplex DNA. In system I, the CT rate was found to be approximately 50 s (-1) for the fully matched AQ-ODN duplexes, while the CT rates of the mismatched DNA were considerably slower than that of the fully matched DNA. In system II, the AQ-ODN duplexes showed almost similar CT rates ( approximately 50 s (-1)) for the fully matched DNA and for the mismatched DNAs. The detection of a single-base mismatch was then performed by chronocoulometry (CC). All the DNA duplexes containing a mismatch base in system I gave the reduced electrochemical responses when compared to the fully matched DNA. In particular, the mismatched DNAs including G--A mismatch can be differentiated from fully matched DNA without using any electrochemical catalyst. We further tested the usefulness of single-stranded (ss) AQ-ODN immobilized on a gold electrode in the electrochemical detection of a single-base mismatch through hybridization assay. The ss-AQ-ODN electrodes were immersed in target-containing buffer at room temperature, and the CC measurements were carried out to see the changes in the integrated charge. Within 60 min, the mismatched DNA was clearly distinguishable by the CC differences from the fully matched target. Thus, the electrochemical hybridization assay provides an easy and convenient detection for DNA mutation that does not require any extra reagents, catalyst, target labeling, and washing steps.     

Coupling into the base pair stack is necessary for DNA-mediated electrochemistry

The electrochemistry of DNA films modified with different redox probes linked to DNA through saturated and conjugated tethers was investigated. Experiments feature two redox probes bound to DNA on two surfaces: anthraquinone (AQ)-modified uridines incorporated into thiolated DNA on gold (Au) and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-modified uridines in pyrene-labeled DNA on highly oriented pyrolytic graphite (HOPG). The electrochemistry of these labels when incorporated into DNA has been examined in DNA films containing both well matched and mismatched DNA. DNA-mediated electrochemistry is found to be effective for the TEMPO probe linked with an acetylene linker but not for a saturated TEMPO connected through an ethylenediamine linker. For the AQ probe, DNA-mediated electrochemistry is found with an acetylene linker to uridine but not with an alkyl chain to the 5' terminus of the oligonucleotide. Large electrochemical signals and effective discrimination of intervening base mismatches are achieved for the probes connected through the acetylene linkages, while probes connected through saturated linkages exhibit small electrochemical signals associated only with direct surface to probe charge transfer and poor mismatch discrimination. Thus DNA electrochemistry with these probes is dramatically influenced by the chemical nature of their linkage to DNA. These results highlight the importance of effective coupling into the pi-stack for long-range DNA-mediated electrochemistry.     

Electrochemical DNA sensors

Electrochemistry-based sensors offer sensitivity, selectivity and low cost for the detection of selected DNA sequences or mutated genes associated with human disease. DNA-based electrochemical sensors exploit a range of different chemistries, but all take advantage of nanoscale interactions between the target in solution, the recognition layer and a solid electrode surface. Numerous approaches to electrochemical detection have been developed, including direct electrochemistry of DNA, electrochemistry at polymer-modified electrodes, electrochemistry of DNA-specific redox reporters, electrochemical amplifications with nanoparticles, and electrochemical devices based on DNA-mediated charge transport chemistry.     

Dimer of 2,7-diamino-1,8-naphthyridine for the detection of mismatches formed by pyrimidine nucleotide bases

Discrimination of base mismatches from normal Watson-Crick base pairs in duplex DNA constitutes a key approach to the detection of single nucleotide polymorphisms (SNPs). We have developed a sensor for a surface plasmon resonance (SPR) assay system to detect G-G, A-A, and C-C mismatch duplexes by employing a surface upon which mismatch-binding ligands (MBLs) are immobilized. We synthesized a new MBL consisting of 2,7-diamino-1,8-naphthyridine (damND) and immobilized it onto a CM5 sensor chip to carry out the SPR assay of DNA duplexes containing a single-base mismatch. The SPR sensor with damND revealed strong responses to all C-C mismatches, and sequence-dependent C-T and T-T mismatches. Compared to ND- and naphthyridine-azaquinolone hybrid (NA)-immobilized sensor surfaces, with affinity to mismatches composed of purine nucleotide bases, the damND-immobilized surface was useful for the detection of the mismatches composed of pyrimidine nucleotide bases.     

Digestion of restriction enzyme for the detection of single-base mismatch in DNA

DNA hybridization and enzymatic digestion for the detection of mutation was investigated on the gold nanoparticles-calf thymus DNA (AuNPs-ctDNA) modified glassy carbon electrode (GCE). The thiol modified probe oligonucleotides (SH-ssDNA) were assembled on the surface of AuNPs-ctDNA modified GCE. The electrochemical response of the electrode was measured by differential pulse voltammetry and cyclic voltammetry. Methylene blue (MB) was used as the electroactive indicator. AuNPs were then dispersed effectively on the GCE surface in the presence of ct-DNA. When hybridization occurred, a decrease in the signal of MB current was observed. The modified electrode was used for the detection of mutations during the enzymatic digestion reaction in DNA. During this reaction, an increase in the signal of MB current was observed. So, the modified SH-ssDNA had a higher electrochemical response on the AuNPs-ctDNA/GCE because of the strong affinity of MB for guanine residues in it. The electrochemical detection of restriction enzyme digestion can provide a simple and practical method for observing single-base mismatches that can help in distinguishing mismatch sequences of DNA from the complementary ones.     

Exploiting the interactions of PNA-DNA films with Ni2+ ions: detection of nucleobase mismatches and electrochemical genotyping of the single-nucleotide mismatch in apoE 4 related to Alzheimer's disease

The presence of Ni(2+) enables us to distinguish the presence of single-nucleotide mismatches in PNA (peptide nucleic acids)-DNA films on gold electrodes by electrochemical impedance spectroscopy (EIS). With the help of a modified Randles' equivalent circuit, differences in the charge transfer resistance (ΔR(CT)) before and after the addition of Ni(2+) are a diagnostic measure for the presence of single-nucleotide mismatch. The approach works under real-life conditions with concentrations of the DNA target strand down to 10 fM, and a PNA capture probe is used to genotype the single-nucleotide mismatch in apoE 4 related to Alzheimer's disease (AD).     

DNA hybridization in nanostructural molecular assemblies enables detection of gene mutations without a fluorescent probe

We have developed a simple single nucleotide polymorphisms (SNPs) analysis utilizing DNA hybridization in nanostructural molecular assemblies. The novel technique enables the detection of a single-base mismatch in a DNA sequence without a fluorescent probe. This report describes for the first time that DNA hybridization occurs in the nanostructural molecular assemblies (termed reverse micelles) formed in an organic medium. The restricted nanospace in the reverse micelles amplifies the differences in the hybridization rate between mismatched and perfectly matched DNA probes. For a model system, we hybridized a 20-mer based on the p53 gene sequence to 20-mer complementary oligonucleotides with various types of mismatches. Without any DNA labeling or electrochemical apparatus, we successfully detected the various oligonucleotide mismatches by simply measuring the UV absorbance at 260 nm.     

Electrochemical DNA hybridization detection using peptide nucleic acids and [Ru(NH3)6]3+ on gold electrodes

An electrochemical DNA hybridization detection method based on the electrostatic interactions of [Ru(NH3)6]3+ cations with the anionic phosphate backbone of DNA is proposed. PNA molecules are immobilized as capture probes on the gold substrate. The cationic ruthenium complexes do not interact electrostatically with the PNA probes due to the absence of the anionic phosphate groups on the PNA probes. But after hybridization, [Ru(NH3)6]3+ is adsorbed on the DNA backbone, giving a clear hybridization detection signal in ac voltammetry. The analytical parameters (sensitivity, selectivity and reproducibility) are evaluated. Very good discrimination against the single-base mismatch A2143G, internal to the 23S rRNA gene of Helicobacter pylori, is observed. Moreover the system is successfully applied to the detection of complementary PCR amplicons.     

Electrochemical genosensors for biomedical applications based on gold nanoparticles

Two gold nanoparticles-based genomagnetic sensors designs for detection of DNA hybridization are described. Both assays are based on a magnetically induced direct electrochemical detection of gold tags on magnetic graphite-epoxy composite electrodes. The first design is a two strands assay format that consists of the hybridization between a capture DNA strand which is linked with paramagnetic beads and another DNA strand related to BRCA1 breast cancer gene used as a target which is coupled with streptavidin-gold nanoparticles. The second genomagnetic sensor design is a sandwich assay format with more application possibilities. A cystic fibrosis related DNA strand is used as a target and sandwiched between two complementary DNA probes: the first one linked with paramagnetic beads and a second one modified with gold nanoparticles via biotin-streptavidin complexation reactions. The electrochemical detection of gold nanoparticles by differential pulse voltammetry was performed in both cases. The developed genomagnetic sensors provide a reliable discrimination against noncomplementary DNA as well against one and three-base mismatches. Optimization parameters affecting the hybridization and analytical performance of the developed genosensors are shown for genomagnetic assays of DNA sequences related with the breast cancer and cystic fibrosis genes.     

Enzymatic amplification detection of DNA based on "molecular beacon" biosensors

We described a novel electrochemical DNA biosensor based on molecular beacon (MB) probe and enzymatic amplification protocol. The MB modified with a thiol at its 5' end and a biotin at its 3' end was immobilized on the gold electrode through mixed self-assembly process. Hybridization events between MB and target DNA cause the conformational change of the MB, triggering the attached biotin group on the electrode surface. Following the specific interaction between the conformation-triggered biotin and streptavidin-horseradish peroxidase (HRP), subsequent quantification of DNA was realized by electrochemical detection of enzymatic product in the presence of substrate. The detection limit is obtained as low as 0.1nM. The presented DNA biosensor has good selectivity, being able to differentiate between a complementary target DNA sequence and one containing G-G single-base mismatches.     

Non-cross-linking gold nanoparticle aggregation as a detection method for single-base substitutions

Aggregation of DNA-modified gold nanoparticles in a non-cross-linking configuration has extraordinary selectivity against terminal mismatch of the surface-bound duplex. In this paper, we demonstrate the utility of this selectivity for detection of single-base substitutions. The samples were prepared through standard protocols: DNA extraction, PCR amplification and single-base primer extension. Oligonucleotide-modified nanoparticles correctly responded to the unpurified products from the primer extension: aggregation for the full match and dispersion for all the mismatches. Applicability of this method to genomic DNA was tested with five human tumor cell lines, and verified by conventional technologies: mass spectrometry and direct sequencing. Unlike the existing methods for single-base substitution analysis, this method does not need specialized equipments, and opens up a new possibility of point-of-care diagnosis for single-nucleotide polymorphisms.     

DNA single-base mismatch study with an electrochemical enzymatic genosensor

A thorough selectivity study of DNA hybridization employing an electrochemical enzymatic genosensor is discussed here. After immobilizing on a gold film a 30-mer 3'-thiolated DNA strand, hybridization with a biotinylated complementary one takes place. Then, alkaline phosphatase is incorporated to the duplex through the interaction streptavidin-biotin. Enzymatic generation of indigo blue from 3-indoxyl phosphate and subsequent electrochemical detection was made. The influence of hybridization conditions was studied in order to better discern between fully complementary and mismatched strands. Detection of 3, 2 and 1 mismatch was possible. The type and location of the single-base mismatch, as well as the influence of the length of the strands was studied too. Mutations that suppose displacement of the reading frame were also considered. The effect of the concentration on the selectivity was tested, resulting a highly selective genosensor with an adequate sensitivity and stability.     

Charge transport in DNA

The base pair stack within double helical DNA provides an effective medium for charge transport. The DNA pi-stack mediates oxidative DNA damage over long molecular distances in a reaction that is exquisitely sensitive to the sequence-dependent conformation and dynamics of DNA. A mixture of tunneling and hopping mechanisms have been proposed to account for this long-range chemistry, which is gated by dynamical variations within the stack. Electrochemical sensors have also been developed, based upon the sensitivity of DNA charge transport to base pair stacking, and these sensors provide a completely new approach to diagnosing single base mismatches in DNA and monitoring protein-DNA interactions electrically. DNA charge transport, furthermore, may play a role within the cell and, indeed, oxidative damage to DNA from a distance has been demonstrated in the cell nucleus. As a result, the biological consequences of and opportunities for DNA-mediated charge transport now require consideration.     

Electrochemical impedance detection of DNA hybridization based on dendrimer modified electrode

Bioactive ultrathin films with the incorporation of amino-terminated G4 PAMAM dendrimers have been prepared via layer-by-layer self-assembly methods on a gold electrode and used for the DNA hybridization analysis. Surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) are used to characterize the successful construction of the multicomponent film on the gold substrate. The dendrimer-modified surfaces improve the immobilization capacity of the probe DNA greatly, compared to the AET (2-aminoethanethiol) SAM sensor surfaces without dendrimer molecules. DNA hybridization analysis is monitored by EIS. The dendrimer-based electrochemical impedance DNA biosensor shows high sensitivity and selectivity for DNA hybridization assay. The multicomponent films also display a high stability during repeated regeneration and hybridization cycles.