Structure of supported bilayers composed of lipopolysaccharides and bacterial phospholipids: raft formation and implications for bacterial resistance

Lipopolysaccharide (LPS), the major lipid on the surface of Gram-negative bacteria, plays a key role in bacterial resistance to hydrophobic antibiotics and antimicrobial peptides. Using atomic force microscopy (AFM) we characterized supported bilayers composed of LPSs from two bacterial chemotypes with different sensitivities to such antibiotics and peptides. Rd LPS, from more sensitive "deep rough" mutants, contains only an inner saccharide core, whereas Ra LPS, from "rough" mutants, contains a longer polysaccharide region. A vesicle fusion technique was used to deposit LPS onto either freshly cleaved mica or polyethylenimine-coated mica substrates. The thickness of the supported bilayers measured with contact-mode AFM was 7 nm for Rd LPS and 9 nm for Ra LPS, consistent with previous x-ray diffraction measurements. In water the Ra LPS bilayer surface was more disordered than Rd LPS bilayers, likely due to the greater volume occupied by the longer Ra LPS polysaccharide region. Since deep rough mutants contain bacterial phospholipid (BPL) as well as LPS on their surfaces, we also investigated the organization of Rd LPS/BPL bilayers. Differential scanning calorimetry and x-ray diffraction indicated that incorporation of BPL reduced the phase transition temperature, enthalpy, and average bilayer thickness of Rd LPS. For Rd LPS/BPL mixtures, AFM showed irregularly shaped regions thinner than Rd LPS bilayers by 2 nm (the difference in thickness between Rd LPS and BPL bilayers), whose area increased with increasing BPL concentration. We argue that the increased permeability of deep rough mutants is due to structural modifications caused by BPL to the LPS membrane, in LPS hydrocarbon chain packing and in the formation of BPL-enriched microdomains.     

Lipopolysaccharides in bacterial membranes act like cholesterol in eukaryotic plasma membranes in providing protection against melittin-induced bilayer lysis

Melittin is a small, cationic peptide that, like many other antimicrobial peptides, lyses cell membranes by acting on their lipid bilayers. However, the sensitivity to antimicrobial peptides varies among cell types. We have performed direct binding and vesicle leakage experiments to determine the sensitivity to melittin of bilayers composed of various physiologically relevant lipids, in particular, key components of eukaryotic membranes (cholesterol) and bacterial outer membranes (lipopolysaccharide or LPS). Melittin binds to bilayers composed of both zwitterionic and negatively charged phospholipids, as well as to the highly charged LPS bilayers. The magnitude of the free energy of binding (deltaG degrees ) increases with increasing bilayer charge density; deltaG degrees = -7.6 kcal/mol for phosphatidylcholine (PC) bilayers and -8.9 to -11.0 kcal/mol for negatively charged bilayers containing phosphatidylserine (PS), phospholipids with covalently attached polyethylene glycol (PEG-lipids), or LPS. Comparisons of these data show that binding is not markedly affected by the steric barrier produced by the PEG in PEG-lipids or by the polysaccharide core of LPS. The addition of equimolar cholesterol to PC bilayers reduces the level of binding (deltaG degrees = -6.4 kcal/mol) and reduces the extent of melittin-induced leakage by 20-fold. LPS and 1:1 PC/cholesterol bilayers have similar high resistance to melittin-induced leakage, indicating that cholesterol in eukaryotic plasma membranes and LPS in Gram-negative bacteria provide strong protection against the lytic effects of melittin. We argue that this resistance is due at least in part to the similar tight packing of the lipid acyl chains in PC/cholesterol and LPS bilayers. The addition of bacterial phospholipids to LPS bilayers increases their sensitivity to melittin, helping to explain the higher sensitivity of deep rough bacteria compared to smooth phenotypes.     

Outer membrane of Salmonella typhimurium: Transmembrane diffusion of some hydrophobic substances

The outer membrane, which is composed of lipopolysaccharide, phospholipids, and proteins, is a layer of the cell wall of Gram-negative bacteria, and apparently acts as a penetration barrier for various substances. It had been shown by other workers that “deep rough” mutants of Salmonella typhimurium, whose lipopolysaccharides lack most of the saccharide chains, were much more sensitive than the wild type strain to certain antibiotics and dyes, but not to others. We found that the former group of agents are usually hydrophobic and the latter group mostly hydrophilic. All hydrophilic antibiotics had molecular weights lower than 650, and one of them was shown to diffuse through the outer membrane at 0 °C. In contrast, some hydrophobic antibiotics had molecular weights in excess of 1200, and the rate of diffusion of one of them was shown to be extremely dependent both on temperature and on the structure of lipopolysaccharide present. These data and results presented elsewhere suggest, but do not necessarily prove, that most hydrophilic antibiotics diffuse through aqueous pores, whereas hydrophobic antibiotics and dyes mainly penetrate by dissolving into the hydrocarbon interior of the outer membrane. In contrast to the outer membrane of deep rough mutants, that of the wild type strain and less defective rough mutants was unusual among biological membranes in that it was practically impermeable to hydrophobic agents. It is proposed that the difference in hydrophobic permeability between the two types of strain is due to radical differences in the organization of the outer membrane, more specifically to the presence or absence of exposed phospholipid bilayer regions.     

Outer membrane vesiculation of acinetobacter calcoaceticus

For intact cells of A. calcoaceticus 69V susceptibility to hydrophobic agents (antibiotics, dyes) was established. The composition of its outer membrane and comparison with that of a reference strain, A. calcoaceticus CCM 5593 with a blocked hydrophobic pathway, gave no indication of phospholipid bilayer domains as the structural basis of these permeability characteristics. The outer membrane composition together with the data of time-resolved fluorescence anisotropy measurements is indicative of a high state of order of the hydrocarbon region. A. calcoaceticus 69V releases lipopolysaccharide (LPS)-rich membrane vesicles into the growth medium when grown on a hydrophobic carbon source. While the cells contain both R-form and S-form LPS, the LPS released with the vesicles is exclusively of the R-type. The same selectivity with respect to LPS composition was observed when LPS was removed from intact cells by EDTA-NaCl treatment which leads to a break-down of the barrier to hydrophobic agents in A. calcoaceticus CCM 5593. We propose that due to its physical properties, R-form LPS forms tightly packed structures within the membrane which, under certain conditions, become destabilized and liberated into the surrounding medium. As a consequence, a disturbance of the highly ordered lateral molecular arrangement might lead to altered permeability properties of the outer membrane as suggested in one of the two alternative models existing to explain permeability changes observed in deep rough mutant strains of Enterobacteriaceae.     

Structure and function of sedoheptulose-7-phosphate isomerase, a critical enzyme for lipopolysaccharide biosynthesis and a target for antibiotic adjuvants

The barrier imposed by lipopolysaccharide (LPS) in the outer membrane of Gram-negative bacteria presents a significant challenge in treatment of these organisms with otherwise effective hydrophobic antibiotics. The absence of L-glycero-D-manno-heptose in the LPS molecule is associated with a dramatically increased bacterial susceptibility to hydrophobic antibiotics and thus enzymes in the ADP-heptose biosynthesis pathway are of significant interest. GmhA catalyzes the isomerization of D-sedoheptulose 7-phosphate into D-glycero-D-manno-heptose 7-phosphate, the first committed step in the formation of ADP-heptose. Here we report structures of GmhA from Escherichia coli and Pseudomonas aeruginosa in apo, substrate, and product-bound forms, which together suggest that GmhA adopts two distinct conformations during isomerization through reorganization of quaternary structure. Biochemical characterization of GmhA mutants, combined with in vivo analysis of LPS biosynthesis and novobiocin susceptibility, identifies key catalytic residues. We postulate GmhA acts through an enediol-intermediate isomerase mechanism.     

Interaction of lipopolysaccharide and phospholipid in mixed membranes: solid-state 31P-NMR spectroscopic and microscopic investigations

Lipopolysaccharide (LPS), which constitutes the outermost layer of Gram-negative bacterial cells as a typical component essential for their life, induces the first line defense system of innate immunity of higher animals. To understand the basic mode of interaction between bacterial LPS and phospholipid cell membranes, distribution patterns were studied by various physical methods of deep rough mutant LPS (ReLPS) of Escherichia coli incorporated in phospholipid bilayers as simple models of cell membranes. Solid-state ³¹P-NMR spectroscopic analysis suggested that a substantial part of ReLPS is incorporated into 1,2-dimyristoyl-sn-glycero-3-phosphocholine lipid bilayers when multilamellar vesicles were prepared from mixtures of these. In egg L-α-phosphatidylcholine (egg-PC)-rich membranes, ReLPS undergoes micellization. In phosphatidylethanolamine-rich membranes, however, micellization was not observed. We studied by microscopic techniques the location of ReLPS in membranes of ReLPS/egg-PC (1:10 M/M) and ReLPS/egg-PC/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) (1:9:1 M/M/M). The influence of ReLPS on the physicochemical properties of the membranes was studied as well. Microscopic images of both giant unilamellar vesicles and supported planar lipid bilayers showed that LPS was uniformly incorporated in the egg-PC lipid bilayers. In the egg-PC/POPG (9:1 M/M) lipid bilayers, however, ReLPS is only partially incorporated and becomes a part of the membrane in a form of aggregates (or as mixed aggregates with the lipids) on the bilayer surface. The lipid lateral diffusion coefficient measurements at various molar ratios of ReLPS/egg-PC/POPG indicated that the incorporated ReLPS reduces the diffusion coefficients of the phospholipids in the membrane. The retardation of diffusion became more significant with increasing POPG concentrations in the membrane at high ReLPS/phospholipid ratios. This work demonstrated that the phospholipid composition has critical influence on the distribution of added ReLPS in the respective lipid membranes and also on the morphology and physicochemical property of the resulting membranes. A putative major factor causing these phenomena is reasoned to be the miscibility between ReLPS and individual phospholipid compositions.     

Molecular Mechanisms of Polymyxin B-Membrane Interactions: Direct Correlation Between Surface Charge Density and Self-Promoted Transport

We have studied the interaction of the polycationic peptide antibiotic polymyxin B (PMB) with asymmetric planar bilayer membranes via electrical measurements. The bilayers were of different compositions, including those of the lipid matrices of the outer membranes of various species of Gram-negative bacteria. One leaflet, representing the bacterial inner leaflet, consisted of a phospholipid mixture (PL; phosphatidylethanolamine, -glycerol, and diphosphatidylglycerol in a molar ratio of 81:17:2). The other (outer) leaflet consisted either of lipopolysaccharide (LPS) from deep rough mutants of PMB-sensitive (Escherichia coli F515) or -resistant strains (Proteus mirabilis R45), glycosphingolipid (GSL-1) from Sphingomonas paucimobilis IAM 12576, or phospholipids (phosphatidylglycerol, diphytanoylphosphatidylcholine). In all membrane systems, the addition of PMB to the outer leaflet led to the induction of current fluctuations due to transient membrane lesions. The minimal PMB concentration required for the induction of the lesions and their size correlated with the charge of the lipid molecules. In the membrane system resembling the lipid matrix of a PMB-sensitive strain (F515 LPS/PL), the diameters of the lesions were large enough (d= 2.4 nm ± 8%) to allow PMB molecules to permeate (self-promoted transport), but in all other systems they were too small. A comparison of these phenomena with membrane effects induced by detergents (dodecyltriphenylphosphonium bromide, dodecyltrimethylammonium bromide, sodiumdodecylsulfate) revealed a detergent-like mechanism of the PMB-membrane interaction. Received: 16 September 1997/Revised: 25 November 1997     

Lipopolysaccharide bilayer structure: effect of chemotype, core mutations, divalent cations, and temperature.

Lipopolysaccharide (LPS), the primary lipid on the surface of Gram-negative bacteria, is thought to act as a protective and permeability barrier. X-ray diffraction analysis of osmotically stressed LPS multilayers was used to determine the structure and interactive properties of LPSs from strains containing the minimum number of sugars necessary for bacterial survival (Re chemotype) to the maximum number of sugars found in rough bacteria (Ra chemotype). At 20 degrees C in the absence of divalent cations, LPS suspensions gave a sharp wide-angle reflection at 4.23 A and a broad low-angle band centered at 50-68 A depending on the chemotype, indicating the presence of gel phase bilayers separated by large fluid spaces. As osmotic pressure was applied, the apposing bilayers were squeezed together and lamellar diffraction at 6 A resolution was obtained. At low applied pressures (<10(6) dyn/cm2), the total repulsive pressure between bilayers could be explained by electrostatic double layer theory. At higher applied pressures, there was a sharp upward break in each pressure-distance relation, indicating the presence of a hydrophilic steric barrier whose range depended strongly on the LPS chemotype. The positions of these upward breaks, along with electron density profiles, showed that the sugar core width systematically increased from 10 A for the Re chemotype to 27 A for the Ra chemotype. In excess buffer, the addition of divalent cations brought the bilayers into steric contact. Electron density profiles were used to determine the locations of cation binding sites and polar substituents on the LPS oligosaccharide core. The area per hydrocarbon chain was approximately 26 A2 in liquid-crystalline LPS bilayers, an indication of an acyl chain packing that is much tighter than that found in bilayers composed of typical membrane lipids. This unusually tight packing could be a critical factor in the permeability barrier provided by LPS.     

Metabolic regulation of antibiotic resistance

It is generally assumed that antibiotics and resistance determinants are the task forces of a biological warfare in which each resistance determinant counteracts the activity of a specific antibiotic. According to this view, antibiotic resistance might be considered as a specific response to an injury, not necessarily linked to bacterial metabolism, except for the burden that the acquisition of resistance might impose on the bacteria (fitness costs). Nevertheless, it is known that changes in bacterial metabolism, such as those associated with dormancy or biofilm formation, modulate bacterial susceptibility to antibiotics (phenotypic resistance), indicating that there exists a linkage between bacterial metabolism and antibiotic resistance. The analyses of the intrinsic resistomes of bacterial pathogens also demonstrate that the building up of intrinsic resistance requires the concerted action of many elements, several of which play a relevant role in the bacterial metabolism. In this article, we will review the current knowledge on the linkage between bacterial metabolism and antibiotic resistance and will discuss the role of global metabolic regulators such as Crc in bacterial susceptibility to antibiotics. Given that growing into the human host requires a metabolic adaptation, we will discuss whether this adaptation might trigger resistance even in the absence of selective pressure by antibiotics.     

BioTimer Assay, a new method for counting Staphylococcus spp. in biofilm without sample manipulation applied to evaluate antibiotic susceptibility of biofilm

The medical device-related infections are frequently a consequence of Staphylococcus biofilm, a lifestyle enhancing bacterial resistance to antibiotics. Antibiotic susceptibility tests are usually performed on planktonic forms of clinical isolates. Some methods have been developed to perform antibiotic susceptibility tests on biofilm. However, none of them counts bacterial inoculum. As antibiotic susceptibility is related to bacterial inoculum, the test results could be mistaken. Here, a new method, BioTimer Assay (BTA), able to count bacteria in biofilm without any manipulation of samples, is presented. Moreover, the BTA method is applied to analyze antibiotic susceptibility of six Staphylococcus strains in biofilm and to determine the number of viable bacteria in the presence of sub-inhibitory doses of four different antibiotics. To validate BTA, the new method was compared to reference methods both for counting and antibiotic susceptibility tests. A high agreement between BTA and reference methods is found on planktonic forms. Therefore, BTA was employed to count bacteria in biofilm and to analyze biofilm antibiotic susceptibility. Results confirm the high resistance to antibiotics of Staphylococcus biofilm. Moreover, BTA counts the number of viable bacteria in the presence of sub-inhibitory doses of antibiotics. The results show that the number of viable bacteria depends on sub-inhibitory doses, age of biofilm and type of antibiotic. In particular, differently to gentamicin and ampicillin, sub-inhibitory doses of ofloxacin and azithromycin reduce the number of viable bacteria at lower extent in young than in old biofilm. In conclusion, BTA is a reliable, rapid, easy-to-perform, and versatile method, and it can be considered a useful tool to analyze antibiotic susceptibility of Staphylococcus spp. in biofilm.     

Detergent-like properties of magainin antibiotic peptides: a 31P solid-state NMR spectroscopy study

(31)P solid-state NMR spectroscopy has been used to investigate the macroscopic phase behavior of phospholipid bilayers in the presence of increasing amounts of magainin antibiotic peptides. Addition of >1 mol% magainin 2 to gel-phase DMPC or liquid crystalline POPC membranes respectively, results in (31)P NMR spectra that are characterized by the coexistence of isotropic signals and line shapes typical for phospholipid bilayers. The isotropic signal intensity is a function of temperature and peptide concentration. At peptide concentrations >4 mol% of the resulting phospholipid (31)P NMR spectra are characteristic of magnetically oriented POPC bilayers suggesting the formation of small disk-like micelles or perforated sheets. In contrast, addition of magainin to acidic phospholipids results in homogenous bilayer-type (31)P NMR spectra with reduced chemical shift anisotropies. The results presented are in good agreement with the interfacial insertion of magainin helices with an alignment parallel to the surface of the phospholipid bilayers. The resulting curvature strain results in detergent-like properties of the amphipathic helical peptides.     

Computer simulation of the rough lipopolysaccharide membrane of Pseudomonas aeruginosa.

Lipopolysaccharides (LPSs) form the major constituent of the outer membrane of Gram-negative bacteria, and are believed to play a key role in processes that govern microbial metal binding, microbial adsorption to mineral surfaces, and microbe-mediated oxidation/reduction reactions at the bacterial exterior surface. A computational modeling capability is being developed for the study of geochemical reactions at the outer bacterial envelope of Gram-negative bacteria. A molecular model for the rough LPS of Pseudomonas aeruginosa has been designed based on experimentally determined structural information. An electrostatic model was developed based on Hartree-Fock SCF calculations of the complete LPS molecule to obtain partial atomic charges. The exterior of the bacterial membrane was assembled by replication of a single LPS molecule and a single phospholipid molecule. Molecular dynamics simulations of the rough LPS membrane of P. aeruginosa were carried out and trajectories were analyzed for the energetic and structural factors that determine the role of LPS in processes at the cell surface.     

Bacterial porin and antibiotic susceptibility

In Gram negative bacteria, hydrophilic antibiotics such as beta-lactams and fluoroquinolons used the bacterial porin channel during their entry. The balance of the porin expression level and the molecular parameters which govern the molecule diffusion through the pore are important physiological points. Acquired in vivo beta-lactam resistance is often associated with porin loss, and recently clinical resistant strains synthetizing mutated porin have been described. These data highlight both the importance of the channel characteristics and the amino acid residues involved in the drug diffusion process. In addition, several mechanisms, including various repressors or activators as well as molecules inhibiting the pore synthesis or activity, argue for the complexity and plasticity of the bacterial control of porin function. All these aspects play a key role in both membrane permeability and efficiency of the antibiotic resistance process.     

Lipopolysaccharide as an antibiotic target

Gram-negative bacteria, including Escherichia coli, Pseudomonas aeruginosa and Acinetobacter baumannii are amongst the highest priority drug-resistant pathogens, for which new antibiotics are urgently needed. Whilst antibiotic drug development is inherently challenging, this is particularly true for Gram-negative bacteria due to the presence of the outer membrane, a highly selective permeability barrier that prevents the ingress of several classes of antibiotic. This selectivity is largely due to an outer leaflet composed of the glycolipid lipopolysaccharide (LPS), which is essential for the viability of almost all Gram-negative bacteria. This essentiality, coupled with the conservation of the synthetic pathway across species and recent breakthroughs in our understanding of transport and membrane homeostasis has made LPS an attractive target for novel antibiotic drug development. Several different targets have been explored and small molecules developed that show promising activity in vitro. However, these endeavours have met limited success in clinical testing and the polymyxins, discovered more than 70 years ago, remain the only LPS-targeting drugs to enter the clinic thus far. In this review, we will discuss efforts to develop therapeutic inhibitors of LPS synthesis and transport and the reasons for limited success, and explore new developments in understanding polymyxin mode of action and the identification of new analogues with reduced toxicity and enhanced activity.     

Membranes of bacteria and mechanism of action of the antibiotic gramicidin S]

The cyclopeptide antibiotic gramicidin S taken at a concentration of 100--200 mkg/mg membrane protein rapidly increases the permeability of M. lysodeikticus protoplast membranes for substrates of respiratory chain and exogenous cytochromes c. Prolonged incubation of gramicidin S with protoplasts results in their lysis which is more fast at low temperatures. In contrast to natural gramicidin, a derivative of gramicidin S with acetylated amino groups does not inhibit either the micrococcus membrane dehydrogenase or the whole of respiratory chain and does not affect the osmotic barrier of protoplasts. Aliphatic diamines (at concentrations up to 0.1 M) and Ca2+ ions (10(-2) M) do not affect the functioning of the respiratory chain in isolated micrococcus membranes. Another derivative of the antibiotic with an increased distance of loaded amino groups from the cyclopeptide framework (diglycyl gramicidin S) affects the membrane in a way similar to that of natural gramicidin. Washing of gramicidin-treated membranes with NaCl enhances the inhibitory effect of the antibiotic on membrane enzymes. The data obtained suggest that in addition to ionic interactions some hydrophobic interactions also occur during gramicidin S binding to the bacterial membrane, probably at the expense of a hydrophobic peptide ring. It is assumed that gramicidin S, similar to Ca2+ and some other membranotropic agents provides for phase separation of negatively charged phospholipids from other groups of phospholipids, manifesting itself in an appearance of "frozen" sites on the membrane which destroys its barrier properties. This is due to the formation of ionic bonds of negatively charged phospholipids. Simultaneously, unlike Ca2+, gramicidin S, when interacting with membrane proteins, prevents their redistribution in more liquid parts of the membrane, which results in a situation when the respiratory enzymes become surrounded by alkyl chains with restricted motion.     

Molecular dynamic study of MlaC protein in Gram‐negative bacteria: conformational flexibility,solvent effect and protein‐phospholipid binding

The composition of the outer membrane in Gram‐negative bacteria is asymmetric, with the lipopolysaccharides found in the outer leaflet and phospholipids in the inner leaflet. The MlaC protein transfers phospholipids from the outer to inner membrane to maintain such lipid asymmetry in the Mla pathway. In this work, we have performed molecular dynamics simulations on apo and phospholipid‐bound systems to study the dynamical properties of MlaC. Our simulations show that the phospholipid forms hydrophobic interactions with the protein. Residues surrounding the entrance of the binding site exhibit correlated motions to control the site opening and closing. Lipid binding leads to increase of the binding pocket volume and precludes entry of the water molecules. However, in the absence of the phospholipid, water molecules can freely move in and out of the binding site when the pocket is open. Dehydration occurs when the pocket closes. This study provides dynamic information of the MlaC protein and may facilitate the design of antibiotics against the Mla pathway of Gram‐negative bacteria.     

Topology and lipid selectivity of pulmonary surfactant protein SP-B in membranes: Answers from fluorescence

Contradictory results have been reported with respect to the depth of penetration and the orientation of pulmonary surfactant protein SP-B in phospholipid membranes and its relative selectivity to interact with anionic over zwitterionic phospholipid species. In the present study we have re-evaluated lipid-protein interactions of SP-B by analysing F?rster resonance energy transfer (FRET) efficiencies, obtained from time-resolved measurements, from the single tryptophan in SP-B to different fluorescently labelled phospholipids in matrix bilayers made of either pure phosphatidylcholine (POPC) or the full lipid extract obtained from purified surfactant. In the background of POPC membranes SP-B exhibits a certain level of selectivity for anionic fluorescent phospholipids over the corresponding zwitterionic analogues, but apparently no preference for phosphatidylglycerol over other anionic species such as phosphatidylserine. No selectivity was detected in membranes made of full surfactant lipids, indicating that specific lipid-protein binding sites could already be occupied by endogenous anionic phospholipids. Furthermore, we have analysed the fit of two different models of how SP-B could be orientated with respect to phospholipid membrane surfaces to the FRET data. The FRET results are consistent with topology models in which the protein has a superficial orientation, with no regions of exclusion by the protein to the access of phospholipids, both in POPC membranes and in membranes made of the whole surfactant lipid fraction. This discards a deep penetration of the protein into the core of bilayers and suggests that most hydrophobic segments of SP-B could participate in protein-protein instead of lipid-protein interactions.     

Cyclopropane ring formation in membrane lipids of bacteria.

It has been known for several decades that cyclopropane fatty acids (CFAs) occur in the phospholipids of many species of bacteria. CFAs are formed by the addition of a methylene group, derived from the methyl group of S-adenosylmethionine, across the carbon-carbon double bond of unsaturated fatty acids (UFAs). The C1 transfer does not involve free fatty acids or intermediates of phospholipid biosynthesis but, rather, mature phospholipid molecules already incorporated into membrane bilayers. Furthermore, CFAs are typically produced at the onset of the stationary phase in bacterial cultures. CFA formation can thus be considered a conditional, postsynthetic modification of bacterial membrane lipid bilayers. This modification is noteworthy in several respects. It is catalyzed by a soluble enzyme, although one of the substrates, the UFA double bond, is normally sequestered deep within the hydrophobic interior of the phospholipid bilayer. The enzyme, CFA synthase, discriminates between phospholipid vesicles containing only saturated fatty acids and those containing UFAs; it exhibits no affinity for vesicles of the former composition. These and other properties imply that topologically novel protein-lipid interactions occur in the biosynthesis of CFAs. The timing and extent of the UFA-to-CFA conversion in batch cultures and the widespread distribution of CFA synthesis among bacteria would seem to suggest an important physiological role for this phenomenon, yet its rationale remains unclear despite experimental tests of a variety of hypotheses. Manipulation of the CFA synthase of Escherichia coli by genetic methods has nevertheless provided valuable insight into the physiology of CFA formation. It has identified the CFA synthase gene as one of several rpoS-regulated genes of E. coli and has provided for the construction of strains in which proposed cellular functions of CFAs can be properly evaluated. Cloning and manipulation of the CFA synthase structural gene have also enabled this novel but extremely unstable enzyme to be purified and analyzed in molecular terms and have led to the identification of mechanistically related enzymes in clinically important bacterial pathogens.     

The porin and the permeating antibiotic: a selective diffusion barrier in Gram-negative bacteria

Gram-negative bacteria are responsible for a large proportion of antibiotic-resistant bacterial diseases. These bacteria have a complex cell envelope that comprises an outer membrane and an inner membrane that delimit the periplasm. The outer membrane contains various protein channels, called porins, which are involved in the influx of various compounds, including several classes of antibiotics. Bacterial adaptation to reduce influx through porins is an increasing problem worldwide that contributes, together with efflux systems, to the emergence and dissemination of antibiotic resistance. An exciting challenge is to decipher the genetic and molecular basis of membrane impermeability as a bacterial resistance mechanism. This Review outlines the bacterial response towards antibiotic stress on altered membrane permeability and discusses recent advances in molecular approaches that are improving our knowledge of the physico-chemical parameters that govern the translocation of antibiotics through porin channels.