Methods and strategies of peptide ligation.

This review focuses on the concept, methods, and strategies of orthogonal peptide ligation. It updates our previous review in 1999 on the same subject matter in Biopolymers (Peptide Science, 1999, Vol. 51, p. 311). Orthogonal peptide ligation is an amino terminal specific method to couple chemically unprotected peptides or proteins derived from synthetic or biosynthetic sources. Unlike conventional chemical methods, peptide ligation methods do not require coupling reagents or protection schemes, but are achieved through a variable chemoselective capture step and then an invariable intramolecular acyl transfer reaction. It is also a convergent method with the fewest steps. More than a dozen orthogonal ligation methods have been developed based on captures by either imine or thioester chemistries to afford native and unusual amino acids at ligation sites of linear, branched, or cyclic peptides. The ligation strategies for multiple segments including sequential and tandem ligations are also discussed.     

Producing peptide arrays for epitope mapping by intein-mediated protein ligation

Peptide arrays are increasingly used to define antibody epitopes and substrate specificities of protein kinases. Their use is hampered, however, by ineffective and variable binding efficiency of peptides, which often results in low sensitivity and inconsistent results. To overcome these limitations, we have developed a novel method for making arrays of synthetic peptides on various membranes after ligating the peptide substrates to an intein-generated carrier protein. We have conducted screening for optimal carrier proteins by immunoreactivity and direct assessment of binding using a peptide derivatized at a lysine sidechain with fluorescein, CDPEK(fluorescein)DS. Ligation of a synthetic peptide antigen to a carrier protein, HhaI methylase, resulted in an improved retention of peptides and an increased sensitivity of up to 10(4)-fold in immunoassay- and epitope-scanning experiments. Denaturing the ligation products with 2% sodium dodecyl sulfate (SDS) or an organic solvent (20% methanol) prior to arraying did not significantly affect the immunoreactivity of the HhaI methylase-peptide product. Because the carrier protein dominates the binding of ligation products and contains one peptide reactive site, the amount of peptide arrayed onto the membranes can be effectively normalized. This technique was utilized in the alanine scanning of hemagglutinin (HA) antigen using two monoclonal antibodies, resulting in distinguishing the different antigen epitope profiles. Furthermore, we show that this method can be used to characterize the antibodies that recognize phosphorylated peptides. This novel approach allows for synthetic peptides to be uniformly arrayed onto membranes, compatible with a variety of applications.     

Immobilization strategies for small molecule,peptide and protein microarrays

Protein, peptide and small molecule microarrays are valuable tools in biological research. In the last decade, substantial progress has been achieved to make these powerful technologies more reliable and available for researchers. This review describes chemical preparation methods for these microarrays with focus on site‐selective and bioorthogonal immobilization reactions, particularly the Staudinger ligation and the thiol‐ene reaction. In addition, the application of peptide microarrays, which were prepared by Staudinger ligation, to substrate specificity mapping is illustrated. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Mimicking reverse protein splicing by three-segment tandem peptide ligation

Here we report a bi-directional and interchangeable three-segment peptide ligation of N, M, and C-segments, mimicking the reverse process of protein splicing to form, in tandem, a tripartite NMC-peptide using a synthetic intein, a role served by the M-segment with an N-terminal Ser or Thr and a C-terminal thioester.     

Native chemical ligation derived method for recombinant peptide/protein C-terminal amidation

C-terminal amidation is often a requisite structural feature for peptide hormone bio-activity. We report a chemical amidation method that converts peptide/protein thioesters into their corresponding C-terminal amides. The peptide/protein thioester is treated with 1-(2,4-dimethoxyphenyl)-2-mercaptoethyl auxiliary (1b) in a native chemical ligation (NCL) reaction to form an intermediate, which upon removal of the auxiliary with TFA, yields the peptide/protein amide. We have demonstrated the general utility of the approach by successfully converting several synthetic peptide thioesters to peptide amides with high conversion rates. Preliminary results of converting a recombinant peptide thioester to its amide form are also reported.     

Synthesis of N-terminally linked protein and peptide dimers by native chemical ligation

Dimerization can be utilized to double the molecular weight of proteins and peptides and potentially increase their avidity of binding to target receptors. These dimerization effects may be utilized to increase in vivo half-lives in a manner similar to PEGylation and may also improve biological activity. In this paper, we report a new strategy for the synthesis of N-terminally linked protein and peptide homodimers utilizing native chemical ligation to conjugate a short dithioester linker to the N-terminal cysteines of protein and peptide monomers to form dimers in a single step. This strategy is general and has been applied to the production of dimers from three recombinantly expressed polypeptides, the IgG binding domain Protein G, an HIV entry inhibitor peptide C37H6, and human interleukin-1 receptor antagonist (IL-1ra). The biological activities of the C37H6 and IL-1ra dimers produced by these methods were retained or even slightly increased when compared to their corresponding monomers.     

'100 years of peptide synthesis': ligation methods for peptide and protein synthesis with applications to beta-peptide assemblies.

A brief survey of the history of peptide chemistry from Theodore Curtius to Emil Fischer to Bruce Merrifield is first presented. The discovery and development of peptide ligation, i.e. of actual chemical synthesis of proteins are described. In the main chapter, 'Synthesis of Proteins by Chemical Ligation' a detailed discussion of the principles, reactivities and mechanisms involved in the various coupling strategies now applied (ligation, chemical ligation, native chemical ligation) is given. These include coupling sites with cysteine and methionine (as well as the seleno analogs), histidine, glycine and pseudo-prolines, 'unrestricted' amino-acid residues (using the Staudinger reaction), as well as solid-phase segment coupling by thioligation of unprotected peptides. In another section, 'Synthesis of beta-peptides by Thioligation', couplings involving beta2- and beta3-peptides are described (with experimental details).     

An o-nitrobenzyl scaffold for peptide ligation: synthesis and applications

Chemical ligation approaches facilitate the chemoselective assembly of unprotected peptides in aqueous solution. Here, two photolabile auxiliaries are described that enlarge the applicability of native chemical ligation to non-cysteine targets. The auxiliaries, designed to allow reaction with thioester peptides, generate an amide bond between the two initial fragments. The o-nitrobenzyl tertiary benzylamide that is formed at the ligation junction can be transformed into a native amide group under mild photolysis conditions. The veratryl auxiliary was found to be excessively labile during peptide purification and ligation. However, the auxiliary based on the o-nitrobenzyl group shows all the necessary properties for a general application in routine peptide and protein synthesis. In addition, the auxiliary linked to the N-terminus can be efficiently photolyzed, suggesting a new approach for the generation of photocaged amines. Synthesis, solid phase introduction onto peptide chains, ligation properties and photolysis in water are described, and a careful study of compatibility of the method with potentially fragile peptide side chains is reported.     

A native peptide ligation strategy for deciphering nucleosomal histone modifications

Post-translational modifications of histones influence both chromatin structure and the binding and function of chromatin-associated proteins. A major limitation to understanding these effects has been the inability to construct nucleosomes in vitro that harbor homogeneous and site-specific histone modifications. Here, we describe a native peptide ligation strategy for generating nucleosomal arrays that can harbor a wide range of desired histone modifications. As a first test of this method, we engineered model nucleosomal arrays in which each histone H3 contains a phosphorylated serine at position 10 and performed kinetic analyses of Gcn5-dependent histone acetyltransferase activities. Recombinant Gcn5 shows increased histone acetyltransferase activity on nucleosomal arrays harboring phosphorylated H3 serine 10 and is consistent with peptide studies. However, in contrast to analyses using peptide substrates, we find that the histone acetyltransferase activity of the Gcn5-containing SAGA complex is not stimulated by H3 phosphorylation in the context of nucleosomal arrays. This difference between peptide and array substrates suggests that the ability to generate specifically modified nucleosomal arrays should provide a powerful tool for understanding the effects of post-translational histone modifications.     

High throughput peptide mass fingerprinting and protein macroarray analysis using chemical printing strategies

We describe a chemical printer that uses piezoelectric pulsing for rapid, accurate, and non-contact microdispensing of fluid for proteomic analysis of immobilized protein macroarrays. We demonstrate protein digestion and peptide mass fingerprinting analysis of human plasma and platelet proteins direct from a membrane surface subsequent to defined microdispensing of trypsin and matrix solutions, hence bypassing multiple liquid-handling steps. Detection of low abundance, alkaline proteins from whole human platelet extracts has been highlighted. Membrane immobilization of protein permits archiving of samples pre-/post-analysis and provides a means for subanalysis using multiple chemistries. This study highlights the ability to increase sequence coverage for protein identification using multiple enzymes and to characterize N-glycosylation modifications using a combination of PNGase F and trypsin. We also demonstrate microdispensing of multiple serum samples in a quantitative microenzyme-linked immunosorbent assay format to rapidly screen protein macroarrays for pathogen-derived antigens. We anticipate the chemical printer will be a major component of proteomic platforms for high throughput protein identification and characterization with widespread applications in biomedical and diagnostic discovery.     

Sortase-mediated protein ligation: an emerging biotechnology tool for protein modification and immobilisation

Sortases are transpeptidases produced by Gram-positive bacteria to anchor cell surface proteins covalently to the cell wall. The Staphylococcus aureus sortase A (SrtA) cleaves a short C-terminal recognition motif (LPXTG) on the target protein followed by the formation of an amide bond with the pentaglycine cross-bridge in the cell wall. Over recent years, several researchers have exploited this specific reaction for a range of biotechnology applications, including the incorporation of non-native peptides and non-peptidic molecules into proteins, the generation of nucleic acid–peptide conjugates and neoglycoconjugates, protein circularisation, and labelling of cell surface proteins on living cells.     

Acidic and basic deprotection strategies of borane-protected phosphinothioesters for the traceless Staudinger ligation

The traceless Staudinger ligation has recently found various applications in the field of peptide synthesis and modification, including immobilization and cyclization strategies. In this report, we utilize the traceless Staudinger ligation in the formation of amide bonds, which allows the acquisition of acylated aminosugars and peptides as well as the cyclization of peptides. A key element in these synthetic procedures is the use of a borane-protected phosphinomethanethiol, which is demonstrated to be prone towards oxidation in its unprotected form, during the synthesis of phosphinothioesters. In combination with acidic and basic deprotection strategies for the borane-protected phosphinothioesters, amide bonds can be formed in the presence of azides in moderate to good overall yields.     

Incorporation of selenocysteine into proteins using peptide ligation

Expressed protein ligation has become a frequently used technique to insert non-standard amino acids into proteins. The technique has been adapted to insert selenocysteine residues in place of cysteine residue in proteins, taking advantage of the similarity in the chemistries of sulfur and selenium. This replacement can confer unique structural and catalytic properties to enzymes and proteins. The development of this technique also allows for naturally occurring selenoproteins to be produced semisynthetically.     

Non-chromatographic strategies for protein refolding

Overexpression of recombinant proteins in bacterial systems (such as E. coli) often leads to formation of inactive and insoluble ' inclusion bodies' . Protein refolding refers to folding back the proteins after solubilizing/unfolding the misfolded proteins of the inclusion bodies. Protein aggregation, a concentration dependent phenomenon, competes with refolding pathway. The refolding strategies largely aim at reducing aggregation and/or promoting correct folding. This review focuses on non-chromatographic strategies for refolding like dilution, precipitation, three phase partitioning and macro-(affinity ligand) facilitated three phase partitioning. The nanomaterials which disperse well in aqueous buffers are also discussed in the context of facilitating protein refolding. Apart from general results with these methods, the review also covers the use of non-chromatographic methods in protein refolding in the patented literature beyond 2000. The patented literature generally describes use of cocktail of additives which results in increase in refolding yield. Such additives include low concentration of chaotropic agents, redox systems, ions like SO4(2-) and Cl-, amines, carboxylic acids and surfactants. Some novel approaches like use of a "pressure window" or ionic liquids for refolding and immobilized diselenide compounds for ensuring correct -S-S- bonds pairing have also been discussed in various patents. In most of the patented literature, focus naturally has been on refolding in case of pharmaceutical proteins.     

Diagnostic strategies for C-reactive protein

Background  

Serum C-reactive protein (CRP) has been identified in prospective epidemiological research as an independent risk marker for cardiovascular disease. In this paper, short-term biological variation of CRP is documented and a strategy to test the reliability of a single CRP sample is proposed.     

Proteomics strategies for protein identification

The information from genome sequencing provides new approaches for systems-wide understanding of protein networks and cellular function. DNA microarray technologies have advanced to the point where nearly complete monitoring of gene expression is feasible in several organisms. An equally important goal is to comprehensive survey cellular proteomes and profile protein changes under different cellular states. This presents a complex analytical problem, due to the chemical variability between proteins and peptides. Here, we discuss strategies to improve accuracy and sensitivity of peptide identification, distinguish represented protein isoforms, and quantify relative changes in protein abundance.     

Use of model peptide reactions for the characterization of kinetically controlled ligation

Since the introduction of kinetically controlled ligation (KCL), a chemoselective reaction between a peptide-(α)thioarylester and a Cys-peptide-(α)thioalkylester, KCL has been utilized for the total chemical synthesis of large proteins (i.e., lysozyme and HIV-protease) by providing fully convergent synthetic routes. Although KCL has the potential to become an important chemistry for protein synthesis, the principle of KCL is not fully characterized. In particular, prior work on KCL has focused on the reactivity difference of the two different -(α)thioester forms-alkyl vs aryl. Another equally important feature of KCL, Xaa-Cys ligation sites, has not been investigated. The work reported here describes combinatorial KCL reactions using model peptides to dissect the interplay of the Xaa(1), Xaa(2), -(α)thioarylester, and -(α)thioalkylester. Results from these studies provide fundamental insights into the KCL reaction, and will lead to the optimal synthetic route for the routine chemical synthesis of large target protein molecules.     

TectoRNP: self‐assembling RNAs with peptide recognition motifs as templates for chemical peptide ligation

TectoRNA, an artificial RNA with self‐assembling ability, has been employed as a structural platform for RNA nanotechnology and RNA synthetic biology. In this study, tectoRNA was applied as a specific template for chemical peptide ligation. On the basis of a self‐assembling tectoRNA, we designed and constructed a template RNA that facilitates peptide ligation depending on controlled dimer formation. Two RNA‐binding peptides were recognized by two peptide‐binding RNA motifs embedded in the template RNA, and chemical ligation was promoted because of the entropic effect of Mg²⁺‐dependent dimerization. In a series of biochemical analyses, we determined the relationship between the structures of the tectoRNA‐based templates and the extent of acceleration in peptide ligation. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.