LEUNIG has multiple functions in gynoecium development in Arabidopsis

The Arabidopsis gene LEUNIG was previously found to regulate floral organ identity. In this work we describe gynoecial phenotypes of newly isolated strong leunig alleles, leunig-101, leunig-102, and leunig-103. Gynoecia of these strong leunig mutants are united only at the basal part, leaving four unfused parts at the apex. Among them two medial ones are styles capped with stigmas, and two lateral ones are protrusions from valves. The gynoecium with unfused apex in leunig arises as a unit from a basal meristematic zone, suggesting that LEUNIG is required for normal congenital gynoecium fusion. The epidermal cells on growing inner surfaces of leunig gynoecium failed to fuse after they contact each other, indicating that LEUNIG is essential for the proper postgenital fusion. The epidermal cells at the very distal portion of protruded valves mimic those on wild-type styles, and those valves occasionally also have stigma-like tissues, indicating that LEUNIG function is required for the valve identity determination. We have also analyzed clavata1-4 leunig-101, clavata2-1 lug-101, fruitfull-1 leunig-101, and pinoid-1 leunig-101 double mutants. clavata1-4 leunig-101 and clavata2-1 leunig-101 exhibited additive phenotypes of single mutants, suggesting that LEUNIG and CLAVATA genes function in different pathways. In contrast, FRUITFULL and PINOID genes interact with LEUNIG to regulate gynoecium development. genesis 26:42-54, 2000.     

Multicarpellate gynoecia in angiosperms: occurrence,development, organization and architectural constraints

Most angiosperms have gynoecia with two to five carpels. However, more than five carpels (here termed ‘multicarpellate condition’) are present in some representatives of all larger subclades of angiosperms. In such multicarpellate gynoecia, the carpels are in either one or more than one whorl (or series). I focus especially on gynoecia in which the carpels are in a single whorl (or series). In such multicarpellate syncarpous gynoecia, the closure in the centre of the gynoecium is imprecise as a result of slightly irregular development of the carpel flanks. Irregular bumps appear to stuff the remaining holes. In multicarpellate gynoecia, the centre of the remaining floral apex is not involved in carpel morphogenesis, so that this unspent part of the floral apex remains morphologically undifferentiated. It usually becomes enclosed within the gynoecium, but, in some cases, remains exposed and may or may not form simple excrescences. The area within the remaining floral apex is histologically characterized by a parenchyma of simple longitudinal cell rows. In highly multicarpellate gynoecia with the carpels in a whorl, the whorl tends to be deformed into an H‐shaped or star‐shaped structure by differential growth of the floral sectors, so that carpels become aligned in parallel rows, in which they face each other with the ventral sides. In this way, a fractionated compitum may still be functional. Multicarpellate gynoecia (with the carpels in one whorl or series) occur in at least one species in 37 of the 63 angiosperm orders. In contrast, non‐multicarpellate gynoecia are present in at least one species of all 63 orders. The basal condition in angiosperms is more likely non‐multicarpellate. Multicarpellate gynoecia are restricted to flowers that are not highly synorganized. In groups with synorganized androecium and gynoecium and in groups with elaborate monosymmetric flowers, multicarpellate gynoecia are lacking. © 2013 The Linnean Society of London, Botanical Journal of the Linnean Society, 2014, 174 , 1–43.     

The unusual gynoecium structure and extragynoecial pollen-tube pathway in <Emphasis Type="Italic">Phytolacca</Emphasis> (Phytolaccaceae)

The fusion of carpels into a unified compound gynoecium is considered a dominant feature of angiosperm evolution and it also occurs by postgenital fusion during the gynoecium development in some apocarpous species. However, we found the reverse process, the separation of carpels from combined carpel primordia, during the development of the gynoecium in Phytolacca. Semithin sectioning and scanning electron microscopy were utilised to observe the structure and development of the gynoecia in Phytolacca acinosa and Phytolacca americana, fluorescence microscopy was utilised to observe the pollen tube growth in the gynoecia of the two species, and the topology method was applied to analyze the relationship between the gynoecium structure and pollen tube pathway. Although the gynoecia of P. acinosa and P. americana are both syncarpous, the degree of carpel fusion in the mature gynoecia of the two syncarpous species is different as a result of variant developmental processes. However, change in the degree of carpel fusion during the development of gynoecia in Phytolacca does not affect pollen tube growth because of the existence of the extragynoecial pollen-tube pathway. Thus, the change in the degree of carpel fusion in Phytolacca is primarily the result of diversification of developmental processes related to selection pressure.     

Flower development in the organ number mutant clavata1-1 of Arabidopsis thaliana (Brassicaceae)

Flowers of the organ number (meristic) mutant clavata1-1 of Arabidopsis thaliana (Brassicaceae) were studied to examine timing and patterns of floral organogenesis as compared to the wild type. All clavata1-1 flowers examined had four- instead of two-loculed gynoecia; half showed increased numbers of stamens; and 10% formed increased numbers of sepals. An inflorescence plastochron index was used to establish the timing of developmental events during flower organogenesis. clavata1-1 flowers initiate faster but grow more slowly than in the wild type. The stages of sepal and stamen initiation were prolonged compared to those of the wild type. Although gynoecial initiation was not prolonged, the preceding stage was and it was characterized by a proliferation of meristematic cells above the initiating stamens. The clavata1-1 flower apex did not become wider than that of the wild type until after the establishment of the gynoecium. We propose that clavata1-1 is a heterochronic mutant, where flower organ number increases are due partly to prolongation of organ initiation stages.     

A FILAMENTOUS FLOWER orthologue plays a key role in leaf patterning in opium poppy

The plant‐specific YABBY genes were initially defined by their roles in determining abaxial/adaxial cell fate in lateral organs of eudicots, and repressing meristematic genes in differentiating tissues such as leaves. In Arabidopsis thaliana FILAMENTOUS FLOWER (FIL) is also required for inflorescence and floral meristem establishment and flower development in a pathway involving the floral transition and identity genes. Here we describe the characterization of a FIL orthologue from the basal eudicot, Papaver somniferum (the opium poppy), and demonstrate a role for the gene in patterning the highly lobed leaf of the poppy. Silencing of PapsFIL using viral‐induced gene silencing resulted in leaves of reduced laminar area, more pronounced margin serration and, in some cases, leaf bifurcation. In contrast, the gene does not appear to affect the development of the flower, and these variations in function are discussed in relation to its taxonomic position as a basal eudicot and its determinate growth habit.     

Developmental morphology of the flower of <Emphasis Type="Italic">Dracontium polyphyllum</Emphasis> in the context of the phylogeny of the Araceae

The inflorescence of Dracontium polyphyllum consists of 150 – 300 flowers arranged in recognisable spirals. The flower has 5 – 6 (90% of observed specimens), or 7 broad tepals enclosing 9 – 12 stamens (occasionally 7) inserted in two whorls. The gynoecium is trilocular (90% of observed specimens) or tetralocular. The tetralocular gynoecia are found at random among the trilocular gynoecia. Each locule encloses an ovule inserted in an axile position, in the median portion of the ovary. Each carpel has its own stylar canal. However, in the upper portion of the style, there is only one common stylar canal. Floral organs are initiated in an acropetal direction in the following sequence: tepals, stamens, and carpels. During later stages of development, the tepals progressively cover the other floral organs. The first floral primordia are initiated on the upper portion of the inflorescence. During early stages of development, the floral primordia have a circular shape. The tepals are initiated nearly simultaneously. During later stages of development, the first whorl of stamens develops in alternation with the tepals and is followed by a second whorl of stamens. The trilocular or tetralocular nature of the ovary is clearly visible during early stages of development of the gynoecium. Recent molecular studies show that Anaphyllopsis A. Hay and Dracontium L. are closely related. However, although pentamerous flowers have been observed in Anaphyllopsis, the developmental morphology of the flower of Dracontium is different from that of Anaphyllopsis.     

Discovery of gynoecium color polymorphism in an aquatic plant

Flower color polymorphlsm exhibited by natural populations provides an opportunity for understanding the evolutionary mechanisms contributing to the diversity of floral morphology.However,little is known about the color polymorphism of female organs in flowering plants.Here we report gynoecium color polymorphism in Butomus umbellatus (Butomaceae),an emergent,aquatic monocot.Populations from Mishan,northeastern China comprised two morphs; gynoecia are either pink,as observed in other areas,or white.We measured floral traits and female fecundity in the two gynoecium color morphs in the field.There was no significant difference in plant height,pedicel length,and flower size including petal,sepal and gynoecium between the two morphs,but plants with pink gynoecia had wider inflorescence stalks,larger inner whorl anthers and produced more pollen and ovules than those with white gynoecia.Correspondingly,we found that seed production was significantly higher in the pink than in the white morph.This new finding suggested selection against white gynoecia in part because of low fecundity,consistent with the rarity of the white gynoecium morph in this species.     

Intersex inflorescences of Rumex acetosa demonstrate that sex determination is unique to each flower

* A triploid intersex individual of the normally dioecious species Rumex acetosa showed extreme variability in gynoecium development. Analysis of the development and distribution of these flowers on inflorescences enabled insight to be gained into the mechanism of sex determination. * Floral phenotypes on intersex inflorescences were classified according to gynoecium development. Flower morphology was investigated by scanning electron and light microscopy. Organ identity gene expression in intersex floral primordia was assessed using in situ hybridization. * The distribution of the different floral phenotypes shows that each individual flower is determined separately, and that the phenotype of each flower is not influenced by its position on the inflorescence, or by the phenotype of neighbouring flowers. C-function gene expression persisted in gynoecia that had ceased development. * Gynoecium development in mutant flowers resembled the phenotype of the Arabidopsis mutant ettin and suggests that a hormone gradient may be involved. C-function expression does not appear to control the extent of female development, and indicates that genes which are downstream of the organ-identity genes must control organ suppression.     

Origin and variation of polymerous gynoecia in Fabaceae: evidence from floral mutants of pea (Pisum sativum L.)

Polymerous gynoecia are normally found in some members of Fabaceae, although the vast majority of this family is characterized by a gynoecium consisting of a single carpel. Summarizing the variation of gynoecium features in these species together with analysis of floral structure and ontogeny in mutants of pea (Pisum sativum L.) suggests to propose two different ways of gynoecium polymerization in legumes. The first is homeotic replacement of the stamens into carpels observed in stp mutants of pea and possibly causing the multicarpellate habit in mimosoids. The second deals with flower fusion within an inflorescence, a transformation observed in fasciated forms of pea together with the mutants coch and det. Similar processes might contribute to formation of the bicarpellate flowers of some swartzioid legumes. The polymerous gynoecium evolved in Fabaceae at least twice independently.     

STUDIES ON THE FLORAL ANATOMY OF THE CUNONIACEAE

Twenty-two genera representing sixty-two species of Cunoniaceae and Davidsonia were examined with respect to floral anatomy. Sepals are vascularized by three traces with the lateral traces of adjacent sepals united. Pancheria is unique for the family with species in which the sepals are vascularized by a single, undivided bundle. Petals, when present, and stamens, are uniformly one-trace structures. A general tendency exists within the family for the principal floral bundles to unite in various ways, with fusions evident between calyx, corolla, and androecial vascular supplies. Carpel number ranges from two to five and the gynoecium is generally surrounded by a prominent disc. Gynoecia of Ceratopetalum and Pullea are “half-inferior.” The number of ovules per carpel locule ranges from one to numerous. Ventral carpel sutures range from open to completely sealed at the level of placentation. Carpels of the apocarpous genus Spiraeanthemum (incl. Acsmithia) are vascularized by a dorsal bundle and either three or four bundles constituting the ovular and wing vasculation in the ventral position, a condition unlike other members of the family. Ovules are supplied by the median ventral bundle. More advanced bicarpellate gynoecia within the family are predominately vascularized by a dorsal and two ventral bundles although a variable number of additional lateral wall traces may be present. A major trend exists toward fusion of the ventral bundles of adjacent carpels in the ovary of both bicarpellate and multicarpellate plants. At the base of the styles the fused ventral strands separate and extend along with the dorsal carpellary bundles into styles of adjacent carpels. In Pullea the ventral bundles terminate within the ovules. The united ventral carpellary bundles in Aphanopetalum, Gillbeea, and Aistopetalum lie in the plane of the septa separating adjacent carpels. Ovules are vascularized by traces originating from the vascular cylinder at the base of the gynoecium or by traces branching from the ventral bundles. Ovular traces in each carpel are united, or remain as discrete bundles, prior to entering the placenta. Tannin and druses are common throughout all floral parts. Although floral anatomy generally supports the position of Cunoniaceae near Saxifragaceae and Davidsoniaceae, the evolutionary relationship of the Cunoniaceae to the Dilleniaceae is uncertain.     

Arabidopsis (Brassicaceae) flower development and gynoecium patterning in wild type and Ettin mutants

Screening for mutations that alter flower development in Arabidopsis has led to the identification of two general types of genetic loci: those affecting meristem and organ identity, and those affecting growth and development independent of identity. ettin (ett) mutants belong to the latter class and exhibit pleiotropic phenotypes distinct from previously described Arabidopsis mutants. These phenotypes include increases in sepal and petal number, decreases in stamen number and anther locule number, and gross alteration of tissue patterning in the gynoecium. To determine when and how differences in ett floral meristems originate, flower development was compared between the wild type and ett mutants. ett floral meristems exhibit increases in abaxial sepal and petal primordia number without apparent increases in meristem size. Extra sepal and petal primordia develop into normal organs. In contrast, stamen and carpel primordia exhibit alterations in shape and form, subsequent to premature elongation of the terminal floral meristem. Phenotypes are allele-strength dependent. The stigma develops precociously and style differentiation is basally and abaxially misplaced in ett gynoecia. The data are discussed in the context of a model suggesting that two concentric boundaries specify the apical-basal pattern of gynoecium differentiation.     

Inception of maleness: auxin contribution to flower masculinization in the dioecious cactus Opuntia stenopetala

In Opuntia stenopetala, flowers initiate as hermaphrodite; however, at maturity, only the stamens in male flowers and the gynoecium in female flowers become functional. At early developmental stages, growth and morphogenesis of the gynoecium in male flowers cease, forming a short style lacking stigmatic tissue at maturity. Here, an analysis of the masculinization process of this species and its relationship with auxin metabolism during gynoecium morphogenesis is presented. Histological analysis and scanning electron microscopy were performed; auxin levels were immunoanalyzed and exogenous auxin was applied to developing gynoecia. Male flower style-tissue patterning revealed morphological defects in the vascular bundles, stylar canal, and transmitting tissue. These features are similar to those observed in Arabidopsis thaliana mutant plants affected in auxin transport, metabolism, or signaling. Notably, when comparing auxin levels between male and female gynoecia from O. stenopetala at an early developmental stage, we found that they were particularly low in the male gynoecium. Consequently, exogenous auxin application on male gynoecia partially restored the defects of gynoecium development. We therefore hypothesize that, the arrest in male flower gynoecia patterning could be related to altered auxin homeostasis; alternatively, the addition of auxin could compensate for the lack of another unknown factor affecting male flower gynoecium development.     

INFLORESCENCE AND FLORAL DEVELOPMENT IN HOUTTUYNIA CORDATA (SAURURACEAE)

The inflorescence of Houttuynia cordata produces 45–70 sessile bracteate flowers in acropetal succession. The inflorescence apical meristem has a mantle-core configuration and produces “common” or uncommitted primordia, each of which bifurcates to form a floral apex above, a bract primordium below. This pattern of organogenesis is similar to that in another saururaceous plant, Saururus cernuus. Exceptions to this unusual development, however, occur in H. cordata at the beginning of inflorescence activity when four to eight petaloid bract primordia are initiated before the initiation of floral apices in their axils. “Common” primordia also are lacking toward the cessation of inflorescence apical activity in H. cordata when primordia become bracts which may precede the initiation of an axillary floral apex. Many of these last-formed bracts are sterile. The inflorescence terminates with maturation of the meristem as an apical residuum. No terminal flowers or terminal gynoecia were found, although subterminal gynoecia or flowers in subterminal position may overtop the actual apex and obscure it. Individual flowers have a tricarpellate syncarpous gynoecium and three stamens adnate to the carpels; petals and sepals are lacking. The order of succession of organs is: two lateral stamens, median stamen, two lateral carpels, median carpel. The three carpel primordia almost immediately are elevated as part of a gynoecial ring by zonal growth of the receptacle below the attachment of the carpels. The same growth elevates the stamen bases so that they appear adnate to the carpels. The trimerous condition in Houttuynia is the result of paired or solitary initiations rather than trimerous whorls. Symmetry is bilateral and zygomorphic rather than radial. No evidence of spiral arrangement in the flower was found.