Genetic characterization of Escherichia coli type 1 pilus adhesin mutants and identification of a novel binding phenotype

Five Escherichia coli type 1 pilus mutants that had point mutations in fimH, the gene encoding the type 1 pilus adhesin FimH, were characterized. FimH is a minor component of type 1 pili that is required for the pili to bind and agglutinate guinea pig erythrocytes in a mannose-inhibitable manner. Point mutations were located by DNA sequencing and deletion mapping. All mutations mapped within the signal sequence or in the first 28% of the predicted mature protein. All mutations were missense mutations except for one, a frameshift lesion that was predicted to cause the loss of approximately 60% of the mature FimH protein. Bacterial agglutination tests with polyclonal antiserum raised to a LacZ-FimH fusion protein failed to confirm that parental amounts of FimH cross-reacting material were expressed in four of the five mutants. The remaining mutant, a temperature-sensitive (ts) fimH mutant that agglutinated guinea pig erythrocytes after growth at 31 degrees C but not at 42 degrees C, reacted with antiserum at both temperatures in a manner similar to the parent. Consequently, this mutant was chosen for further study. Temperature shift experiments revealed that new FimH biosynthesis was required for the phenotypic change. Guinea pig erythrocyte and mouse macrophage binding experiments using the ts mutant grown at the restrictive and permissive temperatures revealed that whereas erythrocyte binding was reduced to a level comparable to that of a fimH insertion mutant at the restrictive temperature, mouse peritoneal macrophages were bound with parental efficiency at both the permissive and restrictive temperatures. Also, macrophage binding by the ts mutant was insensitive to mannose inhibition after growth at 42 degrees C but sensitive after growth at 31 degrees C. The ts mutant thus binds macrophages with one receptor specificity at 31 degrees C and another at 42 degrees C.     

Escherichia coli enterotoxin. Purification and partial characterization.

Enterotoxin, a diarrheagenic protein elaborated by pathogenic Escherichia coli strains has been isolated from the supernatant of fermenter cultures of E. coli strain P263, a porcine enteropathogen. Purification steps involving Bio-Gel agarose A-5m, Sephadex G-75 chromatography, and preparative isotachophoresis were used in the isolation. The resulting product appears to be pure according to immunoelectrophoretic, disc electrophoretic, ultracentrifugal, and immunologic criteria. The entertoxin has an apparent molecular weight of 102,000 as judged by gel filtration and sodium dodecyl sulfate polyacrylamide gel electrophoresis, and its isoelectric point is 6.90. The isolated product is highly active in inducing experimental diarrhea in adult rabbits and piglets. It also elicits, in small dosage, a marked increase in adenylate cyclase activity in broken cell preparations of cat heart tissue. The enterotoxin activity is acid-labile and is destroyed by heating at 65 degrees for 30 min. It is suggested that the heat-stable enterotoxin material is derived from heat-labile enterotoxin by forming a complex with endotoxin or capsular material present in the culture supernatant.     

Escherichia coli 987P pilus: purification and partial characterization

The Escherichia coli somatic pilus, 987P, has been purified after removal by homogenization from a 987P+ enterotoxigenic E. coli. Cell-free pili were precipitated by the addition of MgCl2, collected, and dissolved in MgCl2-free buffer. Five cycles of precipitation and dissolving resulted in a preparation of 987P that was judged to be homogeneous based on electron microscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. In the electron microscope, 987P was rod shaped, having a diameter of 7 nm and an apparent axial hole. Cells and membrane vesicles were not observed in the purified pilus preparation. Electrophoresis of 987P through sodium dodecyl sulfate-polyacrylamide gels resulted in a single band when the sample was denatured in the absence of mercaptoethanol and in two bands when the sample was denatured in the presence of mercaptoethanol. The calculated molecular weight of 987 was variable, depending upon the polyacrylamide concentration and whether mercaptoethanol was included in the denaturing solution. Chemically, 987P is composed primarily of protein but also contains an unidentified amino sugar. The amino terminal amino acid of 987P is alanine and its isoelectric point is pH 3.7. 987P possesses no detectable hemagglutinating activity.     

Isolation and characterization of Escherichia coli phase variants and mutants deficient in type 1 pilus production.

Type 1 pili of Escherichia coli are the prototype of the somatic class of pili found on many strains of bacteria. As a first step in the genetic analysis of type 1 piliation, an extensive series of nonpiliated derivatives of E. coli K-12 strain AW405, was characterized to produce attached or free pili when examined in the antiserum or appeared to produce attached or free pili when examined in the electron microscope. The derivatives fell into two classes; phase variants and mutants. Phase variants that formed colonies of two distinctive types, one associated with a predominantly piliated (P+), and the other associated with a nonpiliated (P-) phase, were obtained. Each phase could give rise to the other at a relatively high rate, which was greater in the P- to P+ direction during culture in unshaken liquid medium. In addition, 77 Pil- mutants were selected on the basis of a subtle difference in colonial morphology. The mutants reverted, if at all, at a much lower rate than that of the P- to P+ change. The stability of Pil- derivatives grown in unshaken liquid medium was used as a criterion for distinguishing between phase variants and mutants, Phase variation also effected colonial morphology and chemotactic swarming. These properties did not directly depend upon piliation since Pil- mutants were only slightly altered in colonial form and unaltered in chemotactic swarming. Piliation of Pil+ bacteria was quantitatively affected by growth conditions.     

Purification and partial characterization of a K99-antigen associated adhesin in Escherichia coli (637 strain)

The K99-antigen associated adhesin in Escherichia coli (637 Strain) has been purified to homogeneity by using conventional chromatographic procedures. Sodium deoxycholate was used in the precipitation steps to avoid hydrophobic interactions between the fimbriae and other membrane-associated components. Homogeneity of the purified adhesin was assessed by electrophoresis, isoelectrofocusing, analytical gel filtration and immunoprecipitation against K99 specific antiserum, being homogeneous in all cases. The purified adhesin is composed of protein sub-units with a molecular weight of 18,900 +/- 950 daltons. No sugars were detected in the molecule. The molecular weight of the adhesin was higher than 2 X 10(6) daltons, and its isoelectric point was estimated to be about 9.45.     

Genetic complementation analysis of Escherichia coli type 1 somatic pilus mutants.

A genetic complementation analysis of 75 stable nonpiliated mutants of a type 1 piliated strain of Escherichia coli K-12, AW405, was performed. Strains containing pairs of pil mutations were constructed by the infectious transfer of an F101 plasmid containing one pil mutation into E. coli K-12 AW 405 containing another pil mutation. The presence or absence of type 1 pili on the merodiploid strains was determined by agglutination with type 1 pilus antiserum. All 75 mutants fell into one of four complementation groups. The pattern of complementation defined three cistrons involved in pilus formation, pilA, pilB, and pilC. The fourth complementation group was composed of a large number of mutants defective in both pilA and pilB functions.     

Valency conversion in the type 1 fimbrial adhesin of Escherichia coli

FimH protein is a lectin-like adhesive subunit of type 1, or mannose-sensitive, fimbriae that are found on the surface of most Escherichia coli strains. All naturally occurring FimH variants demonstrate a conserved mannotriose-specific (i.e. multivalent) binding. Here, we demonstrate that replacement of residues 185-279 within the FimH pilin domain with a corresponding segment of the type 1C fimbrial adhesin FocH leads to a loss of the multivalent mannotriose-specific binding property accompanied by the acquisition of a distinct monomannose-specific (i.e. monovalent) binding capability. Bacteria expressing the monovalent hybrid adhesins were capable of binding strongly to uroepithelial tissue culture cells and guinea pig erythrocytes. They could not, however, agglutinate yeast or bind human buccal cells -- functions readily accomplished by the E. coli-expressing mannotriose-specific FimH variants. Based on the relative potency of inhibiting compounds of different structures, the receptor binding site within monovalent FimH-FocH adhesin has an extended structure with an overall configuration similar to that within the multivalent FimH of natural origin. The monomannose-only specific phenotype could also be invoked by a single point mutation, E89K, located within the lectin domain of FimH, but distant from the receptor binding site. The structural alterations influence the receptor-binding valency of the FimH adhesin via distal effects on the combining pocket, obviously by affecting the FimH quaternary structure.     

Purification and characterization of human H-ras proteins expressed in Escherichia coli.

The full-length normal and T24 mutant human H-ras proteins and two truncated derivatives of the T24 mutant were expressed efficiently in Escherichia coli. The proteins accumulated to 1 to 5% of total cellular protein, and each was specifically recognized by anti-ras monoclonal antibodies. The two full-length proteins as well as a carboxyl-terminal truncated derivative (deleted for 23 amino acid residues) were soluble upon cell lysis and were purified to 90% homogeneity without the use of denaturants. In contrast, an amino-terminal truncated ras derivative (deleted for 22 amino acid residues) required treatment with urea for its solubilization. The guanine nucleotide binding activity of these four proteins was assessed by a combination of ligand binding on proteins blots, immunoprecipitation, and standard filter binding procedures. The full-length proteins showed similar binding kinetics and a stoichiometry approaching 1 mol of GTP bound per mol of protein. The showed similar binding kinetics and a stoichiometry approaching 1 mol of GTP bound per mol of protein. The carboxyl-terminal truncated protein also bound GTP, but to a reduced extent, whereas the amino-terminal truncated protein did not have binding activity. Apparently, the carboxyl-terminal domain of ras, although important for transforming function, does not play a critical role in GTP binding.     

The type IV pilus assembly complex: biogenic interactions among the bundle-forming pilus proteins of enteropathogenic Escherichia coli

Production of type IV bundle-forming pili (BFP) by enteropathogenic Escherichia coli (EPEC) requires the protein products of 12 genes of the 14-gene bfp operon. Antisera against each of these proteins were used to demonstrate that in-frame deletion of individual genes within the operon reduces the abundance of other bfp operon-encoded proteins. This result was demonstrated not to be due to downstream polar effects of the mutations but rather was taken as evidence for protein-protein interactions and their role in the stabilization of the BFP assembly complex. These data, combined with the results of cell compartment localization studies, suggest that pilus formation requires the presence of a topographically discrete assembly complex that is composed of BFP proteins in stoichiometric amounts. The assembly complex appears to consist of an inner membrane component containing three processed, pilin-like proteins, BfpI, -J, and -K, that localize with BfpE, -L, and -A (the major pilin subunit); an outer membrane, secretin-like component, BfpB and -G; and a periplasmic component composed of BfpU. Of these, only BfpL consistently localizes with both the inner and outer membranes and thus, together with BfpU, may articulate between the Bfp proteins in the inner membrane and outer membrane compartments.     

Purification and preliminary characterization of the Escherichia coli K-12 recF protein.

The recF gene of Escherichia coli is known to encode an Mr-40,000 protein that is involved in DNA recombinationa nd postreplication DNA repair. To characterize the role of the recF gene product in these processes, the recF gene was cloned downstream of a tac promoter to facilitate overproduction of the recF gene product. The RecF protein was overproduced and purified to apparent homogeneity. N-terminal protein sequence analysis demonstrated that the purified protein had the sequence that was predicted from the DNA sequence of the recF gene, except that the predicted N-terminal Met was not present. The RecF protein bound to single-stranded oligonucleotides in filter binding and gel filtration assays. Maximal binding required 2 to 3 min of incubation at 37 degrees C; the binding reaction had a pH optimum of 7.0, did not require divalent cations, and was inhibited by NaCl concentrations of greater than 250 mM. The Kd of RecF protein binding to a 59-base single-stranded oligonucleotide was on the order of 1.3 X 10(-7) M, and the reaction did not show cooperativity. Experiments measuring the binding to various DNA substrates and competition binding experiments with different DNA molecules demonstrated that RecF protein binds preferentially to single-stranded, linear DNA molecules.     

Purification and characterization of 50S ribosomal proteins of Escherichia coli

Summary Twenty-seven proteins of the 50S ribosomal subunit from E. coli have been purified by a combination of differential solubility in ammonium sulfate, ion-exchange chromatography, and molecular-sieve chromatography. The amino acid compositions, tryptic peptides and molecular weights of these proteins have been analyzed. Each protein is unique with respect to amino acid sequence and, according to chemical criteria, reasonably pure. The sum of the molecular weights of the twenty-seven proteins is 495000. This means that the 50S subunit could accommodate one copy of each protein.     

Purification and characterization of herpes simplex virus type 1 alkaline exonuclease expressed in Escherichia coli.

The alkaline exonuclease (AE) encoded by the herpes simplex virus type 1 (HSV-1) UL12 open reading frame was inducibly expressed in Escherichia coli and purified without the use of chromatographic separation. This recombinant AE was found to exhibit the same biochemical properties as the virus-encoded protein and was used to confirm the existence of a weak endonucleolytic activity in the enzyme. Antisera raised against the recombinant protein recognized several forms of the AE in HSV-1-infected cells. This expression and purification strategy will provide an economical and easily accessible alternative source of HSV-1 AE for future in vitro studies.     

NMR structure of the Escherichia coli type 1 pilus subunit FimF and its interactions with other pilus subunits

Type 1 pili from uropathogenic Escherichia coli strains mediate bacterial attachment to target receptors on the host tissue. They are composed of up to 3000 copies of the subunit FimA, which form the stiff, helical pilus rod, and the subunits FimF, FimG, and FimH, which form the linear tip fibrillum. All subunits in the pilus interact via donor strand complementation, in which the incomplete immunoglobulin-like fold of each subunit is complemented by insertion of an N-terminal extension from the following subunit. We determined the NMR structure of a monomeric, self-complemented variant of FimF, FimF_F, which has a second FimF donor strand segment fused to its C-terminus that enables intramolecular complementation of the FimF fold. NMR studies on bimolecular complexes between FimF_F and donor strand-depleted variants of FimF and FimG revealed that the relative orientations of neighboring domains in the tip fibrillum cover a wide range. The data provide strong support for the intrinsic flexibility of the tip fibrillum. They lend further support to the hypothesis that this flexibility would significantly increase the probability that the adhesin at the distal end of the fibrillum successfully targets host cell receptors.     

Dihydroorotase from Escherichia coli. Purification and characterization

Dihydroorotase (4,5-L-dihydroorotate amidohydrolase (EC 3.5.2.3], which catalyzes the reversible cyclization of N-carbamyl-L-aspartate to dihydro-L-orotate, has been purified to homogeneity from an over-producing strain of Escherichia coli. Treatment of 70 g of frozen cell paste produces about 7 mg of pure enzyme, a yield of about 35%. The native molecular weight, determined by equilibrium sedimentation, is 80,900 +/- 4,300. The subunit molecular weight, determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis is 38,400 +/- 2,600, and by amino acid analysis is 41,000. The enzyme is thus a dimer and contains 0.95 +/- 0.08 tightly bound zinc atoms per subunit when isolated by the described procedure, which would remove any loosely bound metal ions. Isoelectric focusing under native conditions yields a major species at isoelectric point 4.97 +/- 0.27 and a minor species at 5.26 +/- 0.27; dihydroorotase activity is proportionately associated with both bands. The enzyme has a partial specific volume of 0.737 ml/g calculated from the amino acid composition and a specific absorption at 278 nm of 0.638 for a 1 mg/ml solution. At 30 degrees C, the Michaelis constant and kcat for dihydro-DL-orotate (at pH 8.0) are 0.0756 mM and 127 s-1, respectively; for N-carbamyl-DL-aspartate (at pH 5.80), they are 1.07 mM and 195 s-1.