Structure and function of natural sulphide-oxidizing microbial mats under dynamic input of light and chemical energy

We studied the interaction between phototrophic and chemolithoautotrophic sulphide-oxidizing microorganisms in natural microbial mats forming in sulphidic streams. The structure of these mats varied between two end-members: one characterized by a layer dominated by large sulphur-oxidizing bacteria (SOB; mostly Beggiatoa-like) on top of a cyanobacterial layer (B/C mats) and the other with an inverted structure (C/B mats). C/B mats formed where the availability of oxygen from the water column was limited (<5 μm). Aerobic chemolithotrophic activity of the SOB depended entirely on oxygen produced locally by cyanobacteria during high light conditions. In contrast, B/C mats formed at locations where oxygen in the water column was comparatively abundant (>45 μM) and continuously present. Here SOB were independent of the photosynthetic activity of cyanobacteria and outcompeted the cyanobacteria in the uppermost layer of the mat where energy sources for both functional groups were concentrated. Outcompetition of photosynthetic microbes in the presence of light was facilitated by the decoupling of aerobic chemolithotrophy and oxygenic phototrophy. Remarkably, the B/C mats conserved much less energy than the C/B mats, although similar amounts of light and chemical energy were available. Thus ecosystems do not necessarily develop towards optimal energy usage. Our data suggest that, when two independent sources of energy are available, the structure and activity of microbial communities is primarily determined by the continuous rather than the intermittent energy source, even if the time-integrated energy flux of the intermittent energy source is greater.     

Changes in sulfate-reducing bacterial populations during the onset of black band disease

Factors that facilitate the onset of black band disease (BBD) of corals remain elusive, though anoxic conditions under the complex microbial mat and production of sulfide are implicated in necrosis of underlying coral tissues. This study investigated the diversity and quantitative shifts of sulfate-reducing bacterial (SRB) populations during the onset of BBD using real-time PCR (RT-PCR) and cloning approaches targeting the dissimilatory (bi)sulfite reductase (dsrA) gene. A quantitativePCR (qPCR) assay targeting the 16S rRNA gene also provided an estimate of total bacteria, and allowed the relative percentage of SRB within the lesions to be determined. Three Montipora sp. coral colonies identified with lesions previously termed cyanobacterial patches (CPs) (comprising microbial communities unlike those of BBD lesions), were tagged and followed through time as CP developed into BBD. The dsrA-targeted qPCR detected few copies of the gene in the CP samples (<65 per ng DNA), though copy numbers increased in BBD lesions (>2500 per ng DNA). SRB in CP samples were less than 1% of the bacterial population, though represented up to 7.5% of the BBD population. Clone libraries also demonstrated a shift in the dominant dsrA sequences as lesions shifted from CP into BBD. Results from this study confirm that SRB increase during the onset of BBD, likely increasing sulfide concentrations at the base of the microbial mat and facilitating the pathogenesis of BBD.     

Phylogenetic stratigraphy in the Guerrero Negro hypersaline microbial mat

The microbial mats of Guerrero Negro (GN), Baja California Sur, Mexico historically were considered a simple environment, dominated by cyanobacteria and sulfate-reducing bacteria. Culture-independent rRNA community profiling instead revealed these microbial mats as among the most phylogenetically diverse environments known. A preliminary molecular survey of the GN mat based on only ∼1500 small subunit rRNA gene sequences discovered several new phylum-level groups in the bacterial phylogenetic domain and many previously undetected lower-level taxa. We determined an additional ∼119 000 nearly full-length sequences and 28 000 >200 nucleotide 454 reads from a 10-layer depth profile of the GN mat. With this unprecedented coverage of long sequences from one environment, we confirm the mat is phylogenetically stratified, presumably corresponding to light and geochemical gradients throughout the depth of the mat. Previous shotgun metagenomic data from the same depth profile show the same stratified pattern and suggest that metagenome properties may be predictable from rRNA gene sequences. We verify previously identified novel lineages and identify new phylogenetic diversity at lower taxonomic levels, for example, thousands of operational taxonomic units at the family-genus levels differ considerably from known sequences. The new sequences populate parts of the bacterial phylogenetic tree that previously were poorly described, but indicate that any comprehensive survey of GN diversity has only begun. Finally, we show that taxonomic conclusions are generally congruent between Sanger and 454 sequencing technologies, with the taxonomic resolution achieved dependent on the abundance of reference sequences in the relevant region of the rRNA tree of life.     

Production and Consumption of Dimethylsulfoniopropionate in Marine Microbial Mats

The fate of dimethylsulfoniopropionate (DMSP), a major sulfonium compound in marine ecosystems, was examined in Microcoleus chthonoplastes-dominated microbial mats. Chemical decomposition of DMSP was observed under laboratory conditions at pH values higher than 10.0. pH profiles measured in situ showed that these highly alkaline conditions occurred in microbial mats. Axenic cultures of M. chthonoplastes contained 37.3 μmol of DMSP g of protein⁻¹, which was partially liberated when the cells were subjected to an osmotic shock. DMSP-amended mat slurries showed a rapid turnover of this compound. The addition of glutaraldehyde blocked DMSP decrease, indicating biological consumption. Populations of potential dimethyl sulfide consumers were found in the top 10 mm of the mat.     

Physiological Adaptation of a Nitrate-Storing Beggiatoa sp. to Diel Cycling in a Phototrophic Hypersaline Mat

The aim of this study was to investigate the supposed vertical diel migration and the accompanying physiology of Beggiatoa bacteria from hypersaline microbial mats. We combined microsensor, stable-isotope, and molecular techniques to clarify the phylogeny and physiology of the most dominant species inhabiting mats of the natural hypersaline Lake Chiprana, Spain. The most dominant morphotype had a filament diameter of 6 to 8 μm and a length varying from 1 to >10 mm. Phylogenetic analysis by 16S rRNA gene comparison revealed that this type appeared to be most closely related (91% sequence identity) to the narrow (4-μm diameter) nonvacuolated marine strain MS-81-6. Stable-isotope analysis showed that the Lake Chiprana species could store nitrate intracellularly to 40 mM. The presence of large intracellular vacuoles was confirmed by fluorescein isothiocyanate staining and subsequent confocal microscopy. In illuminated mats, their highest abundance was found at a depth of 8 mm, where oxygen and sulfide co-occurred. However, in the dark, the highest Beggiatoa densities occurred at 7 mm, and the whole population was present in the anoxic zone of the mat. Our findings suggest that hypersaline Beggiatoa bacteria oxidize sulfide with oxygen under light conditions and with internally stored nitrate under dark conditions. It was concluded that nitrate storage by Beggiatoa is an optimal strategy to both occupy the suboxic zones in sulfidic sediments and survive the dark periods in phototrophic mats.     

Succession of cable bacteria and electric currents in marine sediment

Filamentous Desulfobulbaceae have been reported to conduct electrons over centimetre-long distances, thereby coupling oxygen reduction at the surface of marine sediment to sulphide oxidation in sub-surface layers. To understand how these ‘cable bacteria'' establish and sustain electric conductivity, we followed a population for 53 days after exposing sulphidic sediment with initially no detectable filaments to oxygen. After 10 days, cable bacteria and electric currents were established throughout the top 15 mm of the sediment, and after 21 days the filament density peaked with a total length of 2 km cm⁻². Cells elongated and divided at all depths with doubling times over the first 10 days of <20 h. Active, oriented movement must have occurred to explain the separation of O₂ and H₂S by 15 mm. Filament diameters varied from 0.4–1.7 μm, with a general increase over time and depth, and yet they shared 16S rRNA sequence identity of >98%. Comparison of the increase in biovolume and electric current density suggested high cellular growth efficiency. While the vertical expansion of filaments continued over time and reached 30 mm, the electric current density and biomass declined after 13 and 21 days, respectively. This might reflect a breakdown of short filaments as their solid sulphide sources became depleted in the top layers of the anoxic zone. In conclusion, cable bacteria combine rapid and efficient growth with oriented movement to establish and exploit the spatially separated half-reactions of sulphide oxidation and oxygen consumption.     

Metabolic activity of subterranean microbial communities in deep granitic groundwater supplemented with methane and H2

It was previously concluded that opposing gradients of sulphate and methane, observations of 16S ribosomal DNA sequences displaying great similarity to those of anaerobic methane-oxidizing Archaea and a peak in sulphide concentration in groundwater from a depth of 250–350 m in Olkiluoto, Finland, indicated proper conditions for methane oxidation with sulphate. In the present research, pressure-resistant, gas-tight circulating systems were constructed to enable the investigation of attached and unattached anaerobic microbial populations from a depth of 327 m in Olkiluoto under in situ pressure (2.4 MPa), diversity, dissolved gas and chemistry conditions. Three parallel flow cell cabinets were configured to allow observation of the influence on microbial metabolic activity of 11 mℳ methane, 11 mℳ methane plus 10 mℳ H₂ or 2.1 mℳ O₂ plus 7.9 mℳ N₂ (that is, air). The concentrations of these gases and of organic acids and carbon, sulphur chemistry, pH and E_h, ATP, numbers of cultivable micro-organisms, and total numbers of cells and bacteriophages were subsequently recorded under batch conditions for 105 days. The system containing H₂ and methane displayed microbial reduction of 0.7 mℳ sulphate to sulphide, whereas the system containing only methane resulted in 0.2 mℳ reduced sulphate. The system containing added air became inhibited and displayed no signs of microbial activity. Added H₂ and methane induced increasing numbers of lysogenic bacteriophages per cell. It appears likely that a microbial anaerobic methane-oxidizing process coupled to acetate formation and sulphate reduction may be ongoing in aquifers at a depth of 250–350 m in Olkiluoto.     

Microelectrode Studies of Interstitial Water Chemistry and Photosynthetic Activity in a Hot Spring Microbial Mat

Microelectrodes were used to measure oxygen, pH, and oxygenic photosynthetic activity in a hot spring microbial mat (Octopus Spring, Yellowstone National Park), where the cyanobacterium Synechococcus lividus and the filamentous bacterium Chloroflexus aurantiacus are the only known phototrophs. The data showed very high biological activities in the topmost layers of the microbial mat, resulting in extreme values for oxygen and pH. At a 1-mm depth at a 55°C site, oxygen and pH reached 900 μM and 9.4, respectively, just after solar noon, whereas anoxic conditions with a pH of 7.2 were measured before sunrise. Although diurnal changes between these extremes occurred over hours during a diurnal cycle, microbial activity was great enough to give the same response in 1 to 2 min after artificial shading. Oxygenic photosynthesis was confined to a 0.5- to 1.1-mm layer at sites with temperatures at or above about 50°C, with maximum activities in the 55 to 60°C region. The data suggest that S. lividus is the dominant primary producer of the mat.     

Low-Molecular-Weight Sulfonates, a Major Substrate for Sulfate Reducers in Marine Microbial Mats

Several low-molecular-weight sulfonates were added to microbial mat slurries to investigate their effects on sulfate reduction. Instantaneous production of sulfide occurred after taurine and cysteate were added to all of the microbial mats tested. The rates of production in the presence of taurine and cysteate were 35 and 24 μM HS⁻ h⁻¹ in a stromatolite mat, 38 and 36 μM HS⁻ h⁻¹ in a salt pond mat, and 27 and 18 μM HS⁻ h⁻¹ in a salt marsh mat, respectively. The traditionally used substrates lactate and acetate stimulated the rate of sulfide production 3 to 10 times more than taurine and cysteate stimulated the rate of sulfide production in all mats, but when ethanol, glycolate, and glutamate were added to stromatolite mat slurries, the resulting increases were similar to the increases observed with taurine and cysteate. Isethionate, sulfosuccinate, and sulfobenzoate were tested only with the stromatolite mat slurry, and these compounds had much smaller effects on sulfide production. Addition of molybdate resulted in a greater inhibitory effect on acetate and lactate utilization than on sulfonate use, suggesting that different metabolic pathways were involved. In all of the mats tested taurine and cysteate were present in the pore water at nanomolar to micromolar concentrations. An enrichment culture from the stromatolite mat was obtained on cysteate in a medium lacking sulfate and incubated anaerobically. The rate of cysteate consumption by this enrichment culture was 1.6 pmol cell⁻¹ h⁻¹. Compared to the results of slurry studies, this rate suggests that organisms with properties similar to the properties of this enrichment culture are a major constituent of the sulfidogenic population. In addition, taurine was consumed at some of highest dilutions obtained from most-probable-number enrichment cultures obtained from stromatolite samples. Based on our comparison of the sulfide production rates found in various mats, low-molecular-weight sulfonates are important sources of C and S in these ecosystems.     

Aerobic and anaerobic nitrogen transformation processes in N2-fixing cyanobacterial aggregates

Colonies of N₂-fixing cyanobacteria are key players in supplying new nitrogen to the ocean, but the biological fate of this fixed nitrogen remains poorly constrained. Here, we report on aerobic and anaerobic microbial nitrogen transformation processes that co-occur within millimetre-sized cyanobacterial aggregates (Nodularia spumigena) collected in aerated surface waters in the Baltic Sea. Microelectrode profiles showed steep oxygen gradients inside the aggregates and the potential for nitrous oxide production in the aggregates'' anoxic centres. ¹⁵N-isotope labelling experiments and nutrient analyses revealed that N₂ fixation, ammonification, nitrification, nitrate reduction to ammonium, denitrification and possibly anaerobic ammonium oxidation (anammox) can co-occur within these consortia. Thus, N. spumigena aggregates are potential sites of nitrogen gain, recycling and loss. Rates of nitrate reduction to ammonium and N₂ were limited by low internal nitrification rates and low concentrations of nitrate in the ambient water. Presumably, patterns of N-transformation processes similar to those observed in this study arise also in other phytoplankton colonies, marine snow and fecal pellets. Anoxic microniches, as a pre-condition for anaerobic nitrogen transformations, may occur within large aggregates (⩾1 mm) even when suspended in fully oxygenated waters, whereas anoxia in small aggregates (<1 to ⩾0.1 mm) may only arise in low-oxygenated waters (⩽25 μM). We propose that the net effect of aggregates on nitrogen loss is negligible in NO₃⁻-depleted, fully oxygenated (surface) waters. In NO₃⁻-enriched (>1.5 μM), O₂-depleted water layers, for example, in the chemocline of the Baltic Sea or the oceanic mesopelagic zone, aggregates may promote N-recycling and -loss processes.     

Biogeochemistry of microbial mats under Precambrian environmental conditions: a modelling study

Microbial mats have arguably been the most important ecosystem on Earth over its 3.5 Gyr inhabitation. Mats have persisted as consortia for billions of years and occupy some of Earth's most hostile environments. With rare exceptions (e.g. microbial mats developed on geothermal springs at Yellowstone National Park, USA), today's mats do not exist under conditions analogous to Precambrian habitats with substantially lower oxygen and sulphate concentrations. This study uses a numerical model of a microbial mat to investigate how mat composition in the past might have differed from modern mats. We present a numerical model of mat biogeochemistry that simulates the growth of cyanobacteria (CYA), colourless sulphur bacteria (CSB), and purple sulphur bacteria (PSB), with sulphate‐reducing bacteria (SRB) and heterotrophic bacteria represented by parameterized sulphate reduction rates and heterotrophic consumption rates, respectively. Variations in the availability of light, oxygen, sulphide, and sulphate at the upper boundary of the mat are the driving forces in the model. Mats with remarkably similar biomass and chemical profiles develop in models under oxygen boundary conditions ranging from 2.5 × 10^?13 to 0.25 mm and sulphate boundary concentrations ranging from 0.29 to 29 mm , designed to simulate various environments from Archean to modern. The modelled mats show little sensitivity to oxygen boundary conditions because, independent of the overlying oxygen concentrations, cyanobacterial photosynthesis creates similar O₂ concentrations of 0.45–0.65 mm in the upper reaches of the mat during the photoperiod. Varying sulphate boundary conditions have more effect on the biological composition of the mat. Sulphide generated from sulphate reduction controls the magnitude and distribution of the PSB population, and plays a part in the distribution of CSB. CSB are the most sensitive species to environmental change, varying with oxygen and sulphide.     

Oxygen Microelectrode That Is Insensitive to Medium Chemical Composition: Use in an Acid Microbial Mat Dominated by Cyanidium caldarium

A novel oxygen microelectrode with a tip diameter of 2 to 20 μm was constructed which could function satisfactorily under a variety of environmental conditions and in a variety of media, including human blood serum, citric acid at pH 2.5, moist air, and paraffin oil. Measurement of oxygen by this electrode does not require stirring of the medium. Electrodes could be made so that the 90% response time necessary to detect changes in oxygen concentration was less than 0.2 s, and response was linear with oxygen concentration. To demonstrate the performance of the electrode, oxygen and photosynthesis profiles of an acid microbial mat (pH 2.8) dominated by the eucaryotic alga Cyanidium caldarium were made. Photosynthetic rates as high as 95 mmol of O₂ dm⁻³ h⁻¹ were measured within the most active 0.1-mm layer, which was ca. 0.2 mm below the surface of the microbial mat. The total photosynthetic activity was 47 mmol of O₂ m⁻² h⁻¹. Vertical profiles of photosynthesis at different light intensities showed that the microalgae within the mat were not photoinhibited at bright sunlight (2,090 μEinsteins m⁻² s⁻¹).     

Phototrophs in High-Iron-Concentration Microbial Mats: Physiological Ecology of Phototrophs in an Iron-Depositing Hot Spring

At Chocolate Pots Hot Springs in Yellowstone National Park the source waters have a pH near neutral, contain high concentrations of reduced iron, and lack sulfide. An iron formation that is associated with cyanobacterial mats is actively deposited. The uptake of [¹⁴C]bicarbonate was used to assess the impact of ferrous iron on photosynthesis in this environment. Photoautotrophy in some of the mats was stimulated by ferrous iron (1.0 mM). Microelectrodes were used to determine the impact of photosynthetic activity on the oxygen content and the pH in the mat and sediment microenvironments. Photosynthesis increased the oxygen concentration to 200% of air saturation levels in the top millimeter of the mats. The oxygen concentration decreased with depth and in the dark. Light-dependent increases in pH were observed. The penetration of light in the mats and in the sediments was determined. Visible radiation was rapidly attenuated in the top 2 mm of the iron-rich mats. Near-infrared radiation penetrated deeper. Iron was totally oxidized in the top few millimeters, but reduced iron was detected at greater depths. By increasing the pH and the oxygen concentration in the surface sediments, the cyanobacteria could potentially increase the rate of iron oxidation in situ. This high-iron-content hot spring provides a suitable model for studying the interactions of microbial photosynthesis and iron deposition and the role of photosynthesis in microbial iron cycling. This model may help clarify the potential role of photosynthesis in the deposition of Precambrian banded iron formations.     

Characterization of metal-binding bioflocculants produced by the cyanobacterial component of mixed microbial mats.

Mixed-species microbial mats that were dominated by the cyanobacterium Oscillatoria sp. and contained heterotrophic and purple autotrophic bacteria were constructed for specific bioremediation applications. When the mats were challenged with metals, production and secretion of metal-binding extracellular polysaccharide bioflocculants were observed. The concentration of these negatively charged polysaccharides was correlated with the removal of manganese from the water column beneath a surface microbial mat. Bioflocculants from an Oscillatoria sp. that was isolated from the mat were collected and concentrated for characterization. A chromatographic analysis revealed a heterogeneous population of polysaccharides with respect to charge density and molecular size. The subpopulation of polysaccharides which exhibited the highest level of flocculating activity was polyanionic and had a molecular weight of more than 200,000. A glycosyl analysis of the bioflocculants revealed the presence of galacturonic acid (2.2%) and glucuronic acid (1.86%). The presence of these components, which were negatively charged at the pH levels generated by the mats during photosynthesis (pH > 7.5), may account for the metal-binding properties of the mats.     

Structure, Growth, and Decomposition of Laminated Algal-Bacterial Mats in Alkaline Hot Springs

Laminated mats of unique character in siliceous alkaline hot springs of Yellowstone Park are formed predominantly by two organisms, a unicellular blue-green alga, Synechococcus lividus, and a filamentous, gliding, photosynthetic bacterium, Chloroflexus aurantiacus. The mats can be divided approximately into two major zones: an upper, aerobic zone in which sufficient light penetrates for net photosynthesis, and a lower, anaerobic zone, where photosynthesis does not occur and decomposition is the dominant process. Growth of the mat was followed by marking the mat surface with silicon carbide particles. The motile Chloroflexus migrates vertically at night, due to positive aerotaxis, responding to reduced O₂ levels induced by dark respiration. The growth rates of mats were estimated at about 50 μm/day. Observations of a single mat at Octopus Spring showed that despite the rapid growth rate, the thickness of the mat remained essentially constant, and silicon carbide layers placed on the surface gradually moved to the bottom of the mat, showing that decomposition was taking place. There was a rapid initial rate of decomposition, with an apparent half-time of about 1 month, followed by a slower period of decomposition with a half-time of about 12 months. Within a year, complete decomposition of a mat of about 2-cm thickness can occur. Also, the region in which decomposition occurs is strictly anaerobic, showing that complete decomposition of organic matter from these organisms can occur in the absence of O₂.     

Consumption of Methane and CO2 by Methanotrophic Microbial Mats from Gas Seeps of the Anoxic Black Sea

The deep anoxic shelf of the northwestern Black Sea has numerous gas seeps, which are populated by methanotrophic microbial mats in and above the seafloor. Above the seafloor, the mats can form tall reef-like structures composed of porous carbonate and microbial biomass. Here, we investigated the spatial patterns of CH₄ and CO₂ assimilation in relation to the distribution of ANME groups and their associated bacteria in mat samples obtained from the surface of a large reef structure. A combination of different methods, including radiotracer incubation, beta microimaging, secondary ion mass spectrometry, and catalyzed reporter deposition fluorescence in situ hybridization, was applied to sections of mat obtained from the large reef structure to locate hot spots of methanotrophy and to identify the responsible microbial consortia. In addition, CO₂ reduction to methane was investigated in the presence or absence of methane, sulfate, and hydrogen. The mat had an average δ¹³C carbon isotopic signature of −67.1‰, indicating that methane was the main carbon source. Regions dominated by ANME-1 had isotope signatures that were significantly heavier (−66.4‰ ± 3.9 ‰ [mean ± standard deviation; n = 7]) than those of the more central regions dominated by ANME-2 (−72.9‰ ± 2.2 ‰; n = 7). Incorporation of ¹⁴C from radiolabeled CH₄ or CO₂ revealed one hot spot for methanotrophy and CO₂ fixation close to the surface of the mat and a low assimilation efficiency (1 to 2% of methane oxidized). Replicate incubations of the mat with ¹⁴CH₄ or ¹⁴CO₂ revealed that there was interconversion of CH₄ and CO_2. The level of CO₂ reduction was about 10% of the level of anaerobic oxidation of methane. However, since considerable methane formation was observed only in the presence of methane and sulfate, the process appeared to be a rereaction of anaerobic oxidation of methane rather than net methanogenesis.     

Microbial community structures in anoxic freshwater lake sediment along a metal contamination gradient

Contamination, such as by heavy metals, has frequently been implicated in altering microbial community structure. However, this association has not been extensively studied for anaerobic communities, or in freshwater lake sediments. We investigated microbial community structure in the metal-contaminated anoxic sediments of a eutrophic lake that were impacted over the course of 80 years by nearby zinc-smelting activities. Microbial community structure was inferred for bacterial, archaeal and eukaryotic populations by evaluating terminal restriction fragment length polymorphism (TRFLP) patterns in near-surface sediments collected in triplicate from five areas of the lake that had differing levels of metal contamination. The majority of the fragments in the bacterial and eukaryotic profiles showed no evidence of variation in association with metal contamination levels, and diversity revealed by these profiles remained consistent even as metal concentrations varied from 3000 to 27 000 mg kg⁻¹ total Zn, 0.125 to 11.2 μ pore water Zn and 0.023 to 5.40 μ pore water As. Although most archaeal fragments also showed no evidence of variation, the prevalence of a fragment associated with mesophilic Crenarchaeota showed significant positive correlation with total Zn concentrations. This Crenarchaeota fragment dominated the archaeal TRFLP profiles, representing between 35% and 79% of the total measured peak areas. Lake DePue 16S rRNA gene sequences corresponding to this TRFLP fragment clustered with anaerobic and soil mesophilic Crenarchaeota sequences. Although Crenarchaeota have been associated with metal-contaminated groundwater and soils, this is a first report (to our knowledge) documenting potential increased prevalence of Crenarchaeota associated with elevated levels of metal contamination.