Dominant Suppressors of Yeast Actin Mutations That Are Reciprocally Suppressed

A gene whose product is likely to interact with yeast actin was identified by the isolation of pseudorevertants carrying dominant suppressors of the temperature-sensitive (Ts) act1-1 mutation. Of 30 independent revertants analyzed, 29 were found to carry extragenic suppressor mutations and of these, 24/24 tested were found to be linked to each other. This linkage group identifies a new gene SAC6, whose product, by several genetic criteria, is likely to interact intimately with actin. First, although act1-1 sac6 strains are temperature-independent (Ts+), 4/17 sac6 mutant alleles tested are Ts in an ACT1+ background. Moreover, four Ts+ pseudorevertants of these ACT1+ sac6 mutants carry suppressor mutations in ACT1; significantly, three of these are again Ts in a SAC6+ background, and are most likely new act1 mutant alleles. Thus, mutations in ACT1 and SAC6 can suppress each other's defects. Second, sac6 mutations can suppress the Ts defects of the act1-1 and act1-2, but not act1-4, mutations. This allele specificity indicates the sac6 mutations do not suppress by simply bypassing the function of actin at high temperature. Third, act1-4 sac6 strains have a growth defect greater than that due to either of the single mutations alone, again suggesting an interaction between the two proteins. The mutant sac6 gene was cloned on the basis of dominant suppression from an act1-1 sac6 mutant library, and was then mapped to chromosome IV, less than 2 cM from ARO1.     

Identification of novel mutations in ACT1 and SLA2 that suppress the actin-cable-overproducing phenotype caused by overexpression of a dominant active form of Bni1p in Saccharomyces cerevisiae

A formin Bni1p nucleates actin to assemble actin cables, which guide the polarized transport of secretory vesicles in budding yeast. We identified mutations that suppressed both the lethality and the excessive actin cable formation caused by overexpression of a truncated Bni1p (BNI1DeltaN). Two recessive mutations, act1-301 in the actin gene and sla2-82 in a gene involved in cortical actin patch assembly, were identified. The isolation of sla2-82 was unexpected, because cortical actin patches are required for the internalization step of endocytosis. Both act1-301 and sla2-82 exhibited synthetic growth defects with bni1Delta. act1-301, which resulted in an E117K substitution, interacted genetically with mutations in profilin (PFY1) and BUD6, suggesting that Act1-301p was not fully functional in formin-mediated polymerization. sla2-82 also interacted genetically with genes involved in actin cable assembly. Some experiments, however, suggested that the effects of sla2-82 were caused by depletion of actin monomers, because the temperature-sensitive growth phenotype of the bni1Delta sla2-82 mutant was suppressed by increased expression of ACT1. The isolation of suppressors of the BNI1DeltaN phenotype may provide a useful system for identification of actin amino-acid residues that are important for formin-mediated actin polymerization and mutations that affect the availability of actin monomers.     

Suppression of the profilin-deficient phenotype by the RHO2 signaling pathway in Saccharomyces cerevisiae

Profilin plays an important role in actin organization in all eukaryotic cells through mechanisms that are still poorly understood. We had previously shown that Mid2p, a transmembrane protein and a potential cell wall sensor, is an effective multicopy suppressor of the profilin-deficient phenotype in Saccharomyces cerevisiae. To better understand the role of Mid2p in the organization of the actin cytoskeleton, we isolated five additional multicopy suppressors of pfy1Delta cells that are Rom1p, Rom2p, Rho2p, Smy1p, and the previously uncharacterized protein Syp1p. The problems of caffeine and NaCl sensitivity, growth defects at 30 degrees and 37 degrees, the accumulation of intracellular vesicular structures, and a random budding pattern in pfy1Delta cells are corrected by all the suppressors tested. This is accompanied by a partial repolarization of the cortical actin patches without the formation of visible actin cables. The overexpression of Mid2p, Rom2p, and Syp1p, but not the overexpression of Rho2p and Smy1p, results in an abnormally thick cell wall in wild-type and pfy1Delta cells. Since none of the suppressors, except Rho2p, can correct the phenotype of the pfy1-111/rho2Delta strain, we propose a model in which the suppressors act through the Rho2p signaling pathway to repolarize cortical actin patches.     

The Yeast V159N Actin Mutant Reveals Roles for Actin Dynamics In Vivo

Actin with a Val 159 to Asn mutation (V159N) forms actin filaments that depolymerize slowly because of a failure to undergo a conformational change after inorganic phosphate release. Here we demonstrate that expression of this actin results in reduced actin dynamics in vivo, and we make use of this property to study the roles of rapid actin filament turnover. Yeast strains expressing the V159N mutant (act1-159) as their only source of actin have larger cortical actin patches and more actin cables than wild-type yeast. Rapid actin dynamics are not essential for cortical actin patch motility or establishment of cell polarity. However, fluid phase endocytosis is defective in act1-159 strains. act1-159 is synthetically lethal with cofilin and profilin mutants, supporting the conclusion that mutations in all of these genes impair the polymerization/ depolymerization cycle. In contrast, act1-159 partially suppresses the temperature sensitivity of a tropomyosin mutant, and the loss of cytoplasmic cables seen in fimbrin, Mdm20p, and tropomyosin null mutants, suggesting filament stabilizing functions for these actin-binding proteins. Analysis of the cables in these double-mutant cells supports a role for fimbrin in organizing cytoplasmic cables and for Mdm20p and tropomyosin in excluding cofilin from the cables.     

Both vegetative and reproductive actin isovariants complement the stunted root hair phenotype of the Arabidopsis act2-1 mutation

The ACT2 gene, encoding one of eight actin isovariants in Arabidopsis, is the most strongly expressed actin gene in vegetative tissues. A search was conducted for physical defects in act2-1 mutant plants to account for their reduced fitness compared with wild type in population studies. The act2-1 insertion fully disrupted expression of ACT2 RNA and significantly lowered the level of total actin protein in vegetative organs. The root hairs of the act2-1 mutants were 10% to 70% the length of wild-type root hairs, and they bulged severely at the base. The length of the mutant root hairs and degree of bulging at the base were affected by adjusting the osmolarity and gelling agent of the growth medium. The act2-1 mutant phenotypes were fully rescued by an ACT2 genomic transgene. When the act2-1 mutation was combined with another vegetative actin mutation, act7-1, the resulting double mutant exhibited extensive synergistic phenotypes ranging from developmental lethality to severe dwarfism. Transgenic overexpression of the ACT7 vegetative isovariant and ectopic expression of the ACT1 reproductive actin isovariant also rescued the root hair elongation defects of the act2-1 mutant. These results suggest normal ACT2 gene regulation is essential to proper root hair elongation and that even minor differences may cause root defects. However, differences in the actin protein isovariant are not significant to root hair elongation, in sharp contrast to recent reports on the functional nonequivalency of plant actin isovariants. Impairment of root hair functions such as nutrient mining, water uptake, and physical anchoring are the likely cause of the reduced fitness seen for act2-1 mutants in multigenerational studies.     

Actin filament bundling by fimbrin is important for endocytosis, cytokinesis, and polarization in fission yeast

Through the coordinated action of diverse actin-binding proteins, cells simultaneously assemble actin filaments with distinct architectures and dynamics to drive different processes. Actin filament cross-linking proteins organize filaments into higher order networks, although the requirement of cross-linking activity in cells has largely been assumed rather than directly tested. Fission yeast Schizosaccharomyces pombe assembles actin into three discrete structures: endocytic actin patches, polarizing actin cables, and the cytokinetic contractile ring. The fission yeast filament cross-linker fimbrin Fim1 primarily localizes to Arp2/3 complex-nucleated branched filaments of the actin patch and by a lesser amount to bundles of linear antiparallel filaments in the contractile ring. It is unclear whether Fim1 associates with bundles of parallel filaments in actin cables. We previously discovered that a principal role of Fim1 is to control localization of tropomyosin Cdc8, thereby facilitating cofilin-mediated filament turnover. Therefore, we hypothesized that the bundling ability of Fim1 is dispensable for actin patches but is important for the contractile ring and possibly actin cables. By directly visualizing actin filament assembly using total internal reflection fluorescence microscopy, we determined that Fim1 bundles filaments in both parallel and antiparallel orientations and efficiently bundles Arp2/3 complex-branched filaments in the absence but not the presence of actin capping protein. Examination of cells exclusively expressing a truncated version of Fim1 that can bind but not bundle actin filaments revealed that bundling activity of Fim1 is in fact important for all three actin structures. Therefore, fimbrin Fim1 has diverse roles as both a filament "gatekeeper" and as a filament cross-linker.     

Suppressors of mdm20 in yeast identify new alleles of ACT1 and TPM1 predicted to enhance actin-tropomyosin interactions

The actin cytoskeleton is required for many aspects of cell division in yeast, including mitochondrial partitioning into growing buds (mitochondrial inheritance). Yeast cells lacking MDM20 function display defects in both mitochondrial inheritance and actin organization, specifically, a lack of visible actin cables and enhanced sensitivity to Latrunculin A. mdm20 mutants also exhibit a temperature-sensitive growth phenotype, which we exploited to isolate second-site suppressor mutations. Nine dominant suppressors selected in an mdm20/mdm20 background rescue temperature-sensitive growth defects and mitochondrial inheritance defects and partially restore actin cables in haploid and diploid mdm20 strains. The suppressor mutations define new alleles of ACT1 and TPM1, which encode actin and the major form of tropomyosin in yeast, respectively. The ACT1 mutations cluster in a region of the actin protein predicted to contact tropomyosin, suggesting that they stabilize actin cables by enhancing actin-tropomyosin interactions. The characteristics of the mutant ACT1 and TPM1 alleles and their potential effects on protein structure and binding are discussed.     

Osmolarity hypersensitivity of hog1 deleted mutants is suppressed by mutation in KSS1 in budding yeast Saccharomyces cerevisiae

An osmosensing mechanism of Saccharomyces cerevisiae involves a mitogen-activated protein kinase (MAPK) cascade (HOG pathway). This study aimed to investigate the response of the yeast to osmotic stress. A mutant strain, in which the HOG1 gene was disrupted by TRP1, was constructed. A spontaneous mutant, named YJY45, which suppresses the osmosensitive growth phenotype of the hog1 deletion mutant, was selected and showed a secondary phenotype of temperature sensitivity on YPD containing 0.5 M NaCl at 37 degrees C. Our data indicate that the spontaneous mutation in YJY45 mutant was mapped in KSS1, which is one of the MAPK family. The mutation in KSS1 suppresses the osmolarity-hypersensitive phenotype of the hog1 deletion mutation and restores GPD1 induction.     

Live cell imaging of the assembly, disassembly, and actin cable-dependent movement of endosomes and actin patches in the budding yeast, Saccharomyces cerevisiae

Using FM4-64 to label endosomes and Abp1p-GFP or Sac6p-GFP to label actin patches, we find that (1) endosomes colocalize with actin patches as they assemble at the bud cortex; (2) endosomes colocalize with actin patches as they undergo linear, retrograde movement from buds toward mother cells; and (3) actin patches interact with and disassemble at FM4-64–labeled internal compartments. We also show that retrograde flow of actin cables mediates retrograde actin patch movement. An Arp2/3 complex mutation decreases the frequency of cortical, nonlinear actin patch movements, but has no effect on the velocity of linear, retrograde actin patch movement. Rather, linear actin patch movement occurs at the same velocity and direction as the movement of actin cables. Moreover, actin patches require actin cables for retrograde movements and colocalize with actin cables as they undergo retrograde movement. Our studies support a mechanism whereby actin cables serve as “conveyor belts” for retrograde movement and delivery of actin patches/endosomes to FM4-64–labeled internal compartments.     

The molecular chaperone Hsp90 is required for high osmotic stress response in Saccharomyces cerevisiae

Exposure of Saccharomyces cerevisiae to high osmotic stress evokes a number of adaptive changes that are necessary for its survival. These adaptive responses are mediated via multiple mitogen-activated protein kinase pathways, of which the high-osmolarity glycerol (HOG) pathway has been studied most extensively. Yeast strains that bear the hsp82T22I or hsp82G81S mutant alleles are osmosensitive. Interestingly, the osmosensitive phenotype is not due to inappropriate functioning of the HOG pathway, as Hog1p phosphorylation and downstream responses including glycerol accumulation are not affected. Rather, the hsp82 mutants display features that are characteristic for cell-wall mutants, i.e. resistance to Zymolyase and sensitivity to Calcofluor White. The osmosensitivity of the hsp82T22I or hsp82G81S strains is suppressed by over-expression of the Hsp90 co-chaperone Cdc37p but not by other co-chaperones. Hsp90 is shown to be required for proper adaptation to high osmolarity via a novel signal transduction pathway that operates parallel to the HOG pathway and requires Cdc37p.     

Null alleles of SAC7 suppress temperature-sensitive actin mutations in Saccharomyces cerevisiae.

Extragenic suppressors of a new temperature-sensitive mutation (act1-4) in the actin gene of Saccharomyces cerevisiae were isolated in an attempt to identify genes whose products interact directly with actin. One suppressor with a cold-sensitive growth phenotype defined the new gene, SAC7, which was mapped, cloned, sequenced, and disrupted. Genetic analysis of strains that are disrupted for SAC7 demonstrated that the protein is required for normal growth and actin assembly at low temperatures. Surprisingly, null mutations in SAC7 also suppressed the temperature-sensitive growth defect caused by the act1-1 and act1-4 mutations, whereas they were lethal in combination with the temperature-sensitive allele act1-2. These results support the notion that the SAC7 gene product is involved in the normal assembly or function or both of actin.     

A role for GEA1 and GEA2 in the organization of the actin cytoskeleton in Saccharomyces cerevisiae

Profilin is an actin monomer-binding protein implicated in the polymerization of actin filaments. In the budding yeast Saccharomyces cerevisiae, the pfy1-111 rho2delta double mutant has severe growth and actin cytoskeletal defects. The GEA1 and GEA2 genes, which code for paralog guanosine exchange factors for Arf proteins, were identified as multicopy suppressors of the mutant phenotype. These two genes restored the polarized distribution of actin cortical patches and produced visible actin cables in both the pfy1-111 rho2delta and pfy1delta cells. Thus, overexpression of GEA1 or GEA2 bypassed the requirement for profilin in actin cable formation. In addition, gea1 gea2 double mutants showed defects in budding and in actin cytoskeleton organization, while overexpression of GEA1 or GEA2 led to the formation of supernumerary actin cable-like structures in a Bni1p/Bnr1p-dependent manner. The ADP-ribosylation factor Arf3p may be a target of Gea1p/Gea2p, since overexpression of ARF3 partially suppressed the profilin-deficient phenotype and a deletion of ARF3 exacerbated the phenotype of a pfy1-111 mutant. Gea1p, Gea2p, Arf1p, and Arf2p but not Arf3p are known to function in vesicular transport between the endoplasmic reticulum and the Golgi. In this work, we demonstrate a role for Gea1p, Gea2p, and Arf3p in the organization of the actin cytoskeleton.     

Actin mutations that show suppression with fimbrin mutations identify a likely fimbrin-binding site on actin

Actin interacts with a large number of different proteins that modulate its assembly and mediate its functions. One such protein is the yeast actin-binding protein Sac6p, which is homologous to vertebrate fimbrin (Adams, A. E. M., D. Botstein, and D. G. Drubin. 1991. Nature (Lond.). 354:404-408.). Sac6p was originally identified both genetically (Adams, A. E. M., and D. Botstein. 1989. Genetics. 121:675-683.) by dominant, reciprocal suppression of a temperature-sensitive yeast actin mutation (act1-1), as well as biochemically (Drubin, D. G., K. G. Miller, and D. Botstein. 1988. J. Cell Biol. 107: 2551-2561.). To identify the region on actin that interacts with Sac6p, we have analyzed eight different act1 mutations that show suppression with sac6 mutant alleles, and have asked whether (a) these mutations occur in a small defined region on the crystal structure of actin; and (b) the mutant actins are defective in their interaction with Sac6p in vitro. Sequence analysis indicates that all of these mutations change residues that cluster in the small domain of the actin crystal structure, suggesting that this region is an important part of the Sac6p-binding domain. Biochemical analysis reveals defects in the ability of several of the mutant actins to bind Sac6p, and a reduction in Sac6p-induced cross-linking of mutant actin filaments. Together, these observations identify a likely site of interaction of fimbrin on actin.     

Ultrastructure of the yeast actin cytoskeleton and its association with the plasma membrane

We characterized the yeast actin cytoskeleton at the ultrastructural level using immunoelectron microscopy. Anti-actin antibodies primarily labeled dense, patchlike cortical structures and cytoplasmic cables. This localization recapitulates results obtained with immunofluorescence light microscopy, but at much higher resolution. Immuno-EM double-labeling experiments were conducted with antibodies to actin together with antibodies to the actin binding proteins Abp1p and cofilin. As expected from immunofluorescence experiments, Abp1p, cofilin, and actin colocalized in immuno-EM to the dense patchlike structures but not to the cables. In this way, we can unambiguously identify the patches as the cortical actin cytoskeleton. The cortical actin patches were observed to be associated with the cell surface via an invagination of plasma membrane. This novel cortical cytoskeleton- plasma membrane interface appears to consist of a fingerlike invagination of plasma membrane around which actin filaments and actin binding proteins are organized. We propose a possible role for this unique cortical structure in wall growth and osmotic regulation.     

end5, end6, and end7: mutations that cause actin delocalization and block the internalization step of endocytosis in Saccharomyces cerevisiae.

Four mutants defective in endocytosis were isolated by screening a collection of temperature-sensitive yeast mutants. Three mutations define new END genes: end5-1, end6-1, and end7-1. The fourth mutation is in END4, a gene identified previously. The end5-1, end6-1, and end7-1 mutations do not affect vacuolar protein localization, indicating that the defect in each mutant is specific for internalization at the plasma membrane. Interestingly, localization of actin patches on the plasma membrane is affected in each of the mutants. end5-1, end6-1, and end7-1 are allelic to VRP1, RVS161, and ACT1, respectively. VRP1 and RVS161 are required for correct actin localization and ACT1 encodes actin. To our surprise, the end6-1 mutation fails to complement the act1-1 mutation. Disruption of the RVS167 gene, which is homologous to END6/RVS161 and which is also required for correct actin localization, also blocks endocytosis. The end7-1 mutant allele has a glycine 48 to aspartic acid substitution in the DNase I-binding loop of actin. We propose that Vrp1p, Rvs161p, and Rvs167p are components of a cytoskeletal structure that contains actin and fimbrin and that is required for formation of endocytic vesicles at the plasma membrane.     

Actin bodies in yeast quiescent cells: an immediately available actin reserve?

Most eukaryotic cells spend most of their life in a quiescent state, poised to respond to specific signals to proliferate. In Saccharomyces cerevisiae, entry into and exit from quiescence are dependent only on the availability of nutrients in the environment. The transition from quiescence to proliferation requires not only drastic metabolic changes but also a complete remodeling of various cellular structures. Here, we describe an actin cytoskeleton organization specific of the yeast quiescent state. When cells cease to divide, actin is reorganized into structures that we named “actin bodies.” We show that actin bodies contain F-actin and several actin-binding proteins such as fimbrin and capping protein. Furthermore, by contrast to actin patches or cables, actin bodies are mostly immobile, and we could not detect any actin filament turnover. Finally, we show that upon cells refeeding, actin bodies rapidly disappear and actin cables and patches can be assembled in the absence of de novo protein synthesis. This led us to propose that actin bodies are a reserve of actin that can be immediately mobilized for actin cables and patches formation upon reentry into a proliferation cycle.     

Actin dynamics in Phytophthora infestans; rapidly reorganizing cables and immobile,long‐lived plaques

The actin cytoskeleton is a dynamic but well‐organized intracellular framework that is essential for proper functioning of eukaryotic cells. Here, we use the actin binding peptide Lifeact to investigate the in vivo actin cytoskeleton dynamics in the oomycete plant pathogen Phytophthora infestans. Lifeact–eGFP labelled thick and thin actin bundles and actin filament plaques allowing visualization of actin dynamics. All actin structures in the hyphae were cortically localized. In growing hyphae actin filament cables were axially oriented in the sub‐apical region whereas in the extreme apex in growing hyphae, waves of fine F‐actin polymerization were observed. Upon growth termination, actin filament plaques appeared in the hyphal tip. The distance between a hyphal tip and the first actin filament plaque correlated strongly with hyphal growth velocity. The actin filament plaques were nearly immobile with average lifetimes exceeding 1 h, relatively long when compared to the lifetime of actin patches known in other eukaryotes. Plaque assembly required ～30 s while disassembly was accomplished in ～10 s. Remarkably, plaque disassembly was not accompanied with internalization and the formation of endocytic vesicles. These findings suggest that the functions of actin plaques in oomycetes differ from those of actin patches present in other organisms.     

Screens for Extragenic Mutations That Fail to Complement Act1 Alleles Identify Genes That Are Important for Actin Function in Saccharomyces Cerevisiae

Null mutations in SAC6 and ABP1, genes that encode actin-binding proteins, failed to complement the temperature-sensitive phenotype caused by a mutation in the ACT1 gene. To identify novel genes whose protein products interact with actin, mutations that fail to complement act1-1 or act1-4, two temperature-sensitive alleles of ACT1, were isolated. A total of 14 extragenic noncomplementing mutations and 12 new alleles of ACT1 were identified in two independent screens. The 14 extragenic noncomplementing mutations represent alleles of at least four different genes, ANC1, ANC2, ANC3 and ANC4 (Actin NonComplementing). Mutations in the ANC1 gene were shown to cause osmosensitivity and defects in actin organization; phenotypes that are similar to those caused by act1 mutations. We conclude that the ANC1 gene product plays an important role in actin cytoskeletal function. The 12 new alleles of ACT1 will be useful for further elucidation of the functions of actin in yeast.