Thermodynamic, kinetic and structural basis for recognition and repair of abasic sites in DNA by apurinic/apyrimidinic endonuclease from human placenta

X-ray analysis of enzyme–DNA interactions is very informative in revealing molecular contacts, but provides neither quantitative estimates of the relative importance of these contacts nor information on the relative contributions of specific and nonspecific interactions to the total affinity of enzymes for specific DNA. A stepwise increase in the ligand complexity approach is used to estimate the relative contributions of virtually every nucleotide unit of synthetic DNA containing abasic sites to its affinity for apurinic/apyrimidinic endonuclease (APE1) from human placenta. It was found that APE1 interacts with 9–10 nt units or base pairs of single-stranded and double-stranded ribooligonucleotides and deoxyribooligonucleotides of different lengths and sequences, mainly through weak additive contacts with internucleotide phosphate groups. Such nonspecific interactions of APE1 with nearly every nucleotide within its DNA-binding cleft provides up to seven orders of magnitude (ΔG° ~ −8.7 to −9.0 kcal/mol) of the enzyme affinity for any DNA substrate. In contrast, interactions with the abasic site together with other specific APE1–DNA interactions provide only one order of magnitude (ΔG° ~ −1.1 to −1.5 kcal/mol) of the total affinity of APE1 for specific DNA. We conclude that the enzyme's specificity for abasic sites in DNA is mostly due to a great increase (six to seven orders of magnitude) in the reaction rate with specific DNA, with formation of the Michaelis complex contributing to the substrate preference only marginally.     

Quantitative analysis of DNA hybridization in a flowthrough microarray for molecular testing

Quantitative information about the nucleic acids hybridization reaction on microarrays is fundamental to designing optimized assays for molecular diagnostics. This study presents the kinetic, equilibrium, and thermodynamic analyses of DNA hybridization in a microarray system designed for fast molecular testing of pathogenic bacteria. Our microarray setup uses a porous, nylon membrane for probe immobilization and flowthrough incubation. The Langmuir model was used to determine the reaction rate constants of hybridization with antisense targets specific to Staphylococcus epidermidis and Staphylococcus aureus strains. The kinetic analysis revealed a sequence-dependent reaction rate, with association rate constants on the order of 10⁵ M⁻¹ s⁻¹ and dissociation rate constants of 10⁻⁴ s⁻¹. We found that by increasing the probe surface density from 10¹¹ to 10¹² molecules/cm², the hybridization rate and efficiency are suppressed while the melting temperature of the DNA duplex increases. The maximum fraction of hybridized capture probes at equilibrium did not exceed 50% for hybridization with antisense sequences and was below 6% for hybridization with long targets obtained from PCR. The van’t Hoff analysis of the temperature denaturation data showed that the DNA hybridization in our porous, flowthrough microarray is thermodynamically less favorable than the hybridization of the same sequences in solution.     

Secondary structure effects on DNA hybridization kinetics: a solution versus surface comparison

The hybridization kinetics for a series of designed 25mer probe–target pairs having varying degrees of secondary structure have been measured by UV absorbance and surface plasmon resonance (SPR) spectroscopy in solution and on the surface, respectively. Kinetic rate constants derived from the resultant data decrease with increasing probe and target secondary structure similarly in both solution and surface environments. Specifically, addition of three intramolecular base pairs in the probe and target structure slow hybridization by a factor of two. For individual strands containing four or more intramolecular base pairs, hybridization cannot be described by a traditional two-state model in solution-phase nor on the surface. Surface hybridization rates are also 20- to 40-fold slower than solution-phase rates for identical sequences and conditions. These quantitative findings may have implications for the design of better biosensors, particularly those using probes with deliberate secondary structure.     

High-Frequency Phage-Mediated Gene Transfer among Escherichia coli Cells, Determined at the Single-Cell Level

Recent whole-genome analysis suggests that lateral gene transfer by bacteriophages has contributed significantly to the genetic diversity of bacteria. To accurately determine the frequency of phage-mediated gene transfer, we employed cycling primed in situ amplification-fluorescent in situ hybridization (CPRINS-FISH) and investigated the movement of the ampicillin resistance gene among Escherichia coli cells mediated by phage at the single-cell level. Phages P1 and T4 and the newly isolated E. coli phage EC10 were used as vectors. The transduction frequencies determined by conventional plating were 3 × 10⁻⁸ to 2 × 10⁻⁶, 1 × 10⁻⁸ to 4 × 10⁻⁸, and <4 × 10⁻⁹ to 4 × 10⁻⁸ per PFU for phages P1, T4, and EC10, respectively. The frequencies of DNA transfer determined by CPRINS-FISH were 7 × 10⁻⁴ to 1 × 10⁻³, 9 × 10⁻⁴ to 3 × 10⁻³, and 5 × 10⁻⁴ to 4 × 10⁻³ for phages P1, T4, and EC10, respectively. Direct viable counting combined with CPRINS-FISH revealed that more than 20% of the cells carrying the transferred gene retained their viabilities. These results revealed that the difference in the number of viable cells carrying the transferred gene and the number of cells capable of growth on the selective medium was 3 to 4 orders of magnitude, indicating that phage-mediated exchange of DNA sequences among bacteria occurs with unexpectedly high frequency.     

Essential arginine residues in the nitrate uptake system from corn seedling roots

Three dicarbonyl reagents were used to demonstrate the presence of an essential arginine residue in the NO₃⁻ uptake system from corn seedling roots (Zea mays L., Golden Cross Bantam). Incubation of corn seedlings with 2,3-butanedione (0.125-1.0 millimolar) and 1,2-cyclohexanedione (0.5-4.0 millimolar) in the presence of borate or with phenylglyoxal (0.25-2.0 millimolar) at pH 7.0 and 30°C resulted in a time-dependent loss of NO₃⁻ uptake following pseudo-first-order kinetics. Second-order rate constants obtained from slopes of linear plots of pseudo-first-order rate constants versus reagent concentrations were 1.67 × 10⁻², 0.68 × 10⁻², and 1.00 × 10⁻² millimolar per minute for 2,3-butanedione, 1,2-cyclohexanedione, and phenylglyoxal, respectively, indicating the faster rate of inactivation with 2,3-butanedione at equimolar concentration. Double log plots of pseudo-first-order rate constants versus reagent concentrations yielded slope values of 1.031 (2,3-butanedione), 1.004 (1,2-cyclohexanedione), and 1.067 (phenylglyoxal), respectively, suggesting the modification of a single arginine residue. The effectiveness of the dicarbonyl reagents appeared to increase with increasing medium pH from 5.5 to 8.0. Unaltered K_m and decreased V_max in the presence of reagents indicate the inactivation of the modified carriers with unaltered properties. The results thus obtained indicate that the NO₃⁻ transport system possesses at least one essential arginine residue.     

Photodegradation of Moxifloxacin in Aqueous and Organic Solvents: A Kinetic Study

The kinetics of photodegradation of moxifloxacin (MF) in aqueous solution (pH 2.0–12.0), and organic solvents has been studied. MF photodegradation is a specific acid-base catalyzed reaction and follows first-order kinetics. The apparent first-order rate constants (k_obs) for the photodegradation of MF range from 0.69 × 10⁻⁴ (pH 7.5) to 19.50 × 10⁻⁴ min⁻¹ (pH 12.0), and in organic solvents from 1.24 × 10⁻⁴ (1-butanol) to 2.04 × 10⁻⁴ min⁻¹ (acetonitrile). The second-order rate constant (k₂) for the [H⁺]-catalyzed and [OH⁻]-catalyzed reactions are 6.61 × 10⁻² and 19.20 × 10⁻² M⁻¹ min⁻¹, respectively. This indicates that the specific base-catalyzed reaction is about three-fold faster than that of the specific acid-catalyzed reaction probably as a result of the rapid cleavage of diazabicyclononane side chain in the molecule. The k_obs-pH profile for the degradation reactions is a V-shaped curve indicating specific acid-base catalysis. The minimum rate of photodegradation at pH 7–8 is due to the presence of zwitterionic species. There is a linear relation between k_obs and the dielectric constant and an inverse relation between k_obs and the viscosity of the solvent. Some photodegraded products of MF have been identified and pathways proposed for their formation in acid and alkaline solutions.KEY WORDS: acid-base catalysis, kinetics, moxifloxacin, photodegradation, rate–pH profile, solvent effect     

Computational generation and screening of RNA motifs in large nucleotide sequence pools

Although identification of active motifs in large random sequence pools is central to RNA in vitro selection, no systematic computational equivalent of this process has yet been developed. We develop a computational approach that combines target pool generation, motif scanning and motif screening using secondary structure analysis for applications to 10¹²–10¹⁴-sequence pools; large pool sizes are made possible using program redesign and supercomputing resources. We use the new protocol to search for aptamer and ribozyme motifs in pools up to experimental pool size (10¹⁴ sequences). We show that motif scanning, structure matching and flanking sequence analysis, respectively, reduce the initial sequence pool by 6–8, 1–2 and 1 orders of magnitude, consistent with the rare occurrence of active motifs in random pools. The final yields match the theoretical yields from probability theory for simple motifs and overestimate experimental yields, which constitute lower bounds, for aptamers because screening analyses beyond secondary structure information are not considered systematically. We also show that designed pools using our nucleotide transition probability matrices can produce higher yields for RNA ligase motifs than random pools. Our methods for generating, analyzing and designing large pools can help improve RNA design via simulation of aspects of in vitro selection.     

Growth Rate Regulation of rRNA Content of a Marine Synechococcus (Cyanobacterium) Strain

The relationship between growth rate and rRNA content in a marine Synechococcus strain was examined. A combination of flow cytometry and whole-cell hybridization with fluorescently labeled 16S rRNA-targeted oligonucleotide probes was used to measure the rRNA content of Synechococcus strain WH8101 cells grown at a range of light-limited growth rates. The sensitivity of this approach was sufficient for the analysis of rRNA even in very slowly growing Synechococcus cells (μ = 0.15 day⁻¹). The relationship between growth rate and cellular rRNA content comprised three phases: (i) at low growth rates (<~0.7 day⁻¹), rRNA cell⁻¹ remained approximately constant; (ii) at intermediate rates (~0.7 − 1.6 day⁻¹), rRNA cell⁻¹ increased proportionally with growth rate; and (iii) at the highest, light-saturated rates (>~1.6 day⁻¹), rRNA cell⁻¹ dropped abruptly. Total cellular RNA (as measured with the nucleic acid stain SYBR Green II) was well correlated with the probe-based measure of rRNA and varied in a similar manner with growth rate. Mean cell volume and rRNA concentration (amount of rRNA per cubic micrometer) were related to growth rate in a manner similar to rRNA cell⁻¹, although the overall magnitude of change in both cases was reduced. These patterns are hypothesized to reflect an approximately linear increase in ribosome efficiency with increasing growth rate, which is consistent with the prevailing prokaryotic model at low growth rates. Taken together, these results support the notion that measurements of cellular rRNA content might be useful for estimating in situ growth rates in natural Synechococcus populations.     

The biophysics of DNA hybridization with immobilized oligonucleotide probes.

A mathematical model based on receptor-ligand interactions at a cell surface has been modified and further developed to represent heterogeneous DNA-DNA hybridization on a solid surface. The immobilized DNA molecules with known sequences are called probes, and the DNA molecules in solution with unknown sequences are called targets in this model. Capture of the perfectly complementary target is modeled as a combined reaction-diffusion limited irreversible reaction. In the model, there are two different mechanisms by which targets can hybridize with the complementary probes: direct hybridization from the solution and hybridization by molecules that adsorb nonspecifically and then surface diffuse to the probe. The results indicate that nonspecific adsorption of single-stranded DNA on the surface and subsequent two-dimensional diffusion can significantly enhance the overall reaction rate. Heterogeneous hybridization depends strongly on the rate constants for DNA adsorption/desorption in the non-probe-covered regions of the surface, the two-dimensional (2D) diffusion coefficient, and the size of probes and targets. The model shows that the overall kinetics of DNA hybridization to DNA on a solid support may be an extremely efficient process for physically realistic 2D diffusion coefficients, target concentrations, and surface probe densities. The implication for design and operation of a DNA hybridization surface is that there is an optimal surface probe density when 2D diffusion occurs; values above that optimum do not increase the capture rate. Our model predicts capture rates in agreement with those from recent experimental literature. The results of our analysis predict that several things can be done to improve heterogeneous hybridization: 1) the solution phase target molecules should be about 100 bases or less in size to speed solution-phase and surface diffusion; 2) conditions should be created such that reversible adsorption and two-dimensional diffusion occur in the surface regions between DNA probe molecules; 3) provided that 2) is satisfied, one can achieve results with a sparse probe coverage that are equal to or better than those obtained with a surface totally covered with DNA probes.     

Chk1 requirement for high global rates of replication fork progression during normal vertebrate S phase

Chk1 protein kinase maintains replication fork stability in metazoan cells in response to DNA damage and DNA replication inhibitors. Here, we have employed DNA fiber labeling to quantify, for the first time, the extent to which Chk1 maintains global replication fork rates during normal vertebrate S phase. We report that replication fork rates in Chk1^−/− chicken DT40 cells are on average half of those observed with wild-type cells. Similar results were observed if Chk1 was inhibited or depleted in wild-type DT40 cells or HeLa cells by incubation with Chk1 inhibitor or small interfering RNA. In addition, reduced rates of fork extension were observed with permeabilized Chk1^−/− cells in vitro. The requirement for Chk1 for high fork rates during normal S phase was not to suppress promiscuous homologous recombination at replication forks, because inhibition of Chk1 similarly slowed fork progression in XRCC3^−/− DT40 cells. Rather, we observed an increased number of replication fibers in Chk1^−/− cells in which the nascent strand is single-stranded, supporting the idea that slow global fork rates in unperturbed Chk1^−/− cells are associated with the accumulation of aberrant replication fork structures.     

Short, synthetic and selectively 13C-labeled RNA sequences for the NMR structure determination of protein–RNA complexes

We report an optimized synthesis of all canonical 2′-O-TOM protected ribonucleoside phosphoramidites and solid supports containing [¹³C₅]-labeled ribose moieties, their sequence-specific introduction into very short RNA sequences and their use for the structure determination of two protein–RNA complexes. These specifically labeled sequences facilitate RNA resonance assignments and are essential to assign a high number of sugar–sugar and intermolecular NOEs, which ultimately improve the precision and accuracy of the resulting structures. This labeling strategy is particularly useful for the study of protein–RNA complexes with single-stranded RNA in solution, which is rapidly an increasingly relevant research area in biology.     

Fast or Slow,Either Head Can Start the Processive Run of Kinesin-2 KIF3AC

Mammalian KIF3AC contains two distinct motor polypeptides and is best known for its role in organelle transport in neurons. Our recent studies showed that KIF3AC is as processive as conventional kinesin-1, suggesting that their ATPase mechanochemistry may be similar. However, the presence of two different motor polypeptides in KIF3AC implies that there must be a cellular advantage for the KIF3AC heterodimer. The hypothesis tested was whether there is an intrinsic bias within KIF3AC such that either KIF3A or KIF3C initiates the processive run. To pursue these experiments, a mechanistic approach was used to compare the pre-steady-state kinetics of KIF3AC to the kinetics of homodimeric KIF3AA and KIF3CC. The results indicate that microtubule collision at 11.4 μm⁻¹ s⁻¹ coupled with ADP release at 78 s⁻¹ are fast steps for homodimeric KIF3AA. In contrast, KIF3CC exhibits much slower microtubule association at 2.1 μm⁻¹ s⁻¹ and ADP release at 8 s⁻¹. For KIF3AC, microtubule association at 6.6 μm⁻¹ s⁻¹ and ADP release at 51 s⁻¹ are intermediate between the constants for KIF3AA and KIF3CC. These results indicate that either KIF3A or KIF3C can initiate the processive run. Surprisingly, the kinetics of the initial event of microtubule collision followed by ADP release for KIF3AC is not equivalent to 1:1 mixtures of KIF3AA plus KIF3CC homodimers at the same motor concentration. These results reveal that the intermolecular communication within the KIF3AC heterodimer modulates entry into the processive run regardless of whether the run is initiated by the KIF3A or KIF3C motor domain.     

Kinetics of Leptin Binding to the Q223R Leptin Receptor

Studies in human populations and mouse models of disease have linked the common leptin receptor Q223R mutation to obesity, multiple forms of cancer, adverse drug reactions, and susceptibility to enteric and respiratory infections. Contradictory results cast doubt on the phenotypic consequences of this variant. We set out to determine whether the Q223R substitution affects leptin binding kinetics using surface plasmon resonance (SPR), a technique that allows sensitive real-time monitoring of protein-protein interactions. We measured the binding and dissociation rate constants for leptin to the extracellular domain of WT and Q223R murine leptin receptors expressed as Fc-fusion proteins and found that the mutant receptor does not significantly differ in kinetics of leptin binding from the WT leptin receptor. (WT: k_a 1.76×10⁶±0.193×10⁶ M⁻¹ s⁻¹, k_d 1.21×10⁻⁴±0.707×10⁻⁴ s⁻¹, K_D 6.47×10⁻¹¹±3.30×10⁻¹¹ M; Q223R: k_a 1.75×10⁶±0.0245×10⁶ M⁻¹ s⁻¹, k_d 1.47×10⁻⁴±0.0505×10⁻⁴ s⁻¹, K_D 8.43×10⁻¹¹±0.407×10⁻¹¹ M). Our results support earlier findings that differences in affinity and kinetics of leptin binding are unlikely to explain mechanistically the phenotypes that have been linked to this common genetic variant. Future studies will seek to elucidate the mechanism by which this mutation influences susceptibility to metabolic, infectious, and malignant pathologies.     

Sequence-Dependent Elasticity and Electrostatics of Single-Stranded DNA: Signatures of Base-Stacking

Base-stacking is a key factor in the energetics that determines nucleic acid structure. We measure the tensile response of single-stranded DNA as a function of sequence and monovalent salt concentration to examine the effects of base-stacking on the mechanical and thermodynamic properties of single-stranded DNA. By comparing the elastic response of highly stacked poly(dA) and that of a polypyrimidine sequence with minimal stacking, we find that base-stacking in poly(dA) significantly enhances the polymer’s rigidity. The unstacking transition of poly(dA) at high force reveals that the intrinsic electrostatic tension on the molecule varies significantly more weakly on salt concentration than mean-field predictions. Further, we provide a model-independent estimate of the free energy difference between stacked poly(dA) and unstacked polypyrimidine, finding it to be ∼−0.25 k_BT/base and nearly constant over three orders of magnitude in salt concentration.     

Structure-Activity Relationships in Microbial Transformation of Phenols

The second-order rate constants for the microbial transformation of a series of phenols were correlated with the physicochemical properties of the phenols. The compounds studied were phenol, p-methylphenol, p-chlorophenol, p-bromophenol, p-cyanophenol, p-nitrophenol, p-acetylphenol, and p-methoxyphenol. Phenol-grown cells of Pseudomonas putida U transformed these compounds. Microbial transformation rate constants ranged from (1.5 ± 0.99) × 10⁻¹⁴ liter · organism⁻¹ · h⁻¹ for p-cyanophenol to (7.0 ± 1.3) × 10⁻¹² liter · organism⁻¹ · h⁻¹ for phenol. Linear regression analyses of rate constants and electronic, steric, and hydrophobic parameters showed that van der Waal's radii gave the best coefficient of determination (r² = 0.956). Products identified by thin-layer chromatography and liquid chromatography indicated that the phenols were microbially oxidized to the corresponding catechols.     

Phosphorylation and Functional Properties of the IIA Domain of the Lactose Transport Protein of Streptococcus thermophilus

The lactose-H⁺ symport protein (LacS) of Streptococcus thermophilus has a carboxyl-terminal regulatory domain (IIA^LacS) that is homologous to a family of proteins and protein domains of the phosphoenolpyruvate:carbohydrate phosphotransferase system (PTS) in various organisms, of which IIA^Glc of Escherichia coli is the best-characterized member. On the basis of these similarities, it was anticipated that IIA^LacS would be able to perform one or more functions associated with IIA^Glc, i.e., carry out phosphoryl transfer and/or affect other catabolic functions. The gene fragment encoding IIA^LacS was overexpressed in Escherichia coli, and the protein was purified in two steps by metal affinity and anion-exchange chromatography. IIA^LacS was unable to restore glucose uptake in a IIA^Glc-deficient strain, which is consistent with a very low rate of phosphorylation of IIA^LacS by phosphorylated HPr (HPr~P) from E. coli. With HPr~P from S. thermophilus, the rate was more than 10-fold higher, but the rate constants for the phosphorylation of IIA^LacS (k₁ = 4.3 × 10² M⁻¹ s⁻¹) and dephosphorylation of IIA^LacS~P by HPr (k₋₁ = 1.1 × 10³ M⁻¹ s⁻¹) are still at least 4 orders of magnitude lower than for the phosphoryltransfer between IIA^Glc and HPr from E. coli. This finding suggests that IIA^LacS has evolved into a protein domain whose main function is not to transfer phosphoryl groups rapidly. On the basis of sequence alignment of IIA proteins with and without putative phosphoryl transfer functions and the known structure of IIA^Glc, we constructed a double mutant [IIA^LacS(I548E/G556D)] that was predicted to have increased phosphoryl transfer activity. Indeed, the phosphorylation rate of IIA^LacS(I548E/G556D) by HPr~P increased (k₁ = 4.0 × 10³ M⁻¹ s⁻¹) and became nearly independent of the source of HPr~P (S. thermophilus, Bacillus subtilis, or E. coli). The increased phosphoryl transfer rate of IIA^LacS(I548E/G556D) was insufficient to complement IIA^Glc in PTS-mediated glucose transport in E. coli. Both IIA^LacS and IIA^LacS(I548E/G556D) could replace IIA^Glc, but in another function: they inhibited glycerol kinase (inducer exclusion) when present in the unphosphorylated form.     

Growth and Nitrogen Uptake Kinetics in Cultured Prorocentrum donghaiense

We compared growth kinetics of Prorocentrum donghaiense cultures on different nitrogen (N) compounds including nitrate (NO₃ ⁻), ammonium (NH₄ ⁺), urea, glutamic acid (glu), dialanine (diala) and cyanate. P. donghaiense exhibited standard Monod-type growth kinetics over a range of N concentraions (0.5–500 μmol N L⁻¹ for NO₃ ⁻ and NH₄ ⁺, 0.5–50 μmol N L⁻¹ for urea, 0.5–100 μmol N L⁻¹ for glu and cyanate, and 0.5–200 μmol N L⁻¹ for diala) for all of the N compounds tested. Cultures grown on glu and urea had the highest maximum growth rates (μ_m, 1.51±0.06 d⁻¹ and 1.50±0.05 d⁻¹, respectively). However, cultures grown on cyanate, NO₃ ⁻, and NH₄ ⁺ had lower half saturation constants (K_μ, 0.28–0.51 μmol N L⁻¹). N uptake kinetics were measured in NO₃ ⁻-deplete and -replete batch cultures of P. donghaiense. In NO₃ ⁻-deplete batch cultures, P. donghaiense exhibited Michaelis-Menten type uptake kinetics for NO₃ ⁻, NH₄ ⁺, urea and algal amino acids; uptake was saturated at or below 50 μmol N L⁻¹. In NO₃ ⁻-replete batch cultures, NH₄ ⁺, urea, and algal amino acid uptake kinetics were similar to those measured in NO₃ ⁻-deplete batch cultures. Together, our results demonstrate that P. donghaiense can grow well on a variety of N sources, and exhibits similar uptake kinetics under both nutrient replete and deplete conditions. This may be an important factor facilitating their growth during bloom initiation and development in N-enriched estuaries where many algae compete for bioavailable N and the nutrient environment changes as a result of algal growth.     

Succession of Internal Sulfur Cycles and Sulfur-Oxidizing Bacterial Communities in Microaerophilic Wastewater Biofilms

The succession of sulfur-oxidizing bacterial (SOB) community structure and the complex internal sulfur cycle occurring in wastewater biofilms growing under microaerophilic conditions was analyzed by using a polyphasic approach that employed 16S rRNA gene-cloning analysis combined with fluorescence in situ hybridization, microelectrode measurements, and standard batch and reactor experiments. A complete sulfur cycle was established via S⁰ accumulation within 80 days in the biofilms in replicate. This development was generally split into two phases, (i) a sulfur-accumulating phase and (ii) a sulfate-producing phase. In the first phase (until about 40 days), since the sulfide production rate (sulfate-reducing activity) exceeded the maximum sulfide-oxidizing capacity of SOB in the biofilms, H₂S was only partially oxidized to S⁰ by mainly Thiomicrospira denitirificans with NO₃⁻ as an electron acceptor, leading to significant accumulation of S⁰ in the biofilms. In the second phase, the SOB populations developed further and diversified with time. In particular, S⁰ accumulation promoted the growth of a novel strain, strain SO07, which predominantly carried out the oxidation of S⁰ to SO₄²⁻ under oxic conditions, and Thiothrix sp. strain CT3. In situ hybridization analysis revealed that the dense populations of Thiothrix (ca. 10⁹ cells cm⁻³) and strain SO07 (ca. 10⁸ cells cm⁻³) were found at the sulfur-rich surface (100 μm), while the population of Thiomicrospira denitirificans was distributed throughout the biofilms with a density of ca. 10⁷ to 10⁸ cells cm⁻³. Microelectrode measurements revealed that active sulfide-oxidizing zones overlapped the spatial distributions of different phylogenetic SOB groups in the biofilms. As a consequence, the sulfide-oxidizing capacities of the biofilms became high enough to completely oxidize all H₂S produced by SRB to SO₄²⁻ in the second phase, indicating establishment of the complete sulfur cycle in the biofilms.     

The Effect of Hydraulic Loading Rate and Influent Source on the Binding Capacity of Phosphorus Filters

Sorption by active filter media can be a convenient option for phosphorus (P) removal and recovery from wastewater for on-site treatment systems. There is a need for a robust laboratory method for the investigation of filter materials to enable a reliable estimation of their longevity. The objectives of this study were to (1) investigate and (2) quantify the effect of hydraulic loading rate and influent source (secondary wastewater and synthetic phosphate solution) on P binding capacity determined in laboratory column tests and (3) to study how much time is needed for the P to react with the filter material (reaction time). To study the effects of these factors, a 2² factorial experiment with 11 filter columns was performed. The reaction time was studied in a batch experiment. Both factors significantly (α = 0.05) affected the P binding capacity negatively, but the interaction of the two factors was not significant. Increasing the loading rate from 100 to 1200 L m⁻² d⁻¹ decreased P binding capacity from 1.152 to 0.070 g kg⁻¹ for wastewater filters and from 1.382 to 0.300 g kg⁻¹ for phosphate solution filters. At a loading rate of 100 L m⁻² d⁻¹, the average P binding capacity of wastewater filters was 1.152 g kg⁻¹ as opposed to 1.382 g kg⁻¹ for phosphate solution filters. Therefore, influent source or hydraulic loading rate should be carefully controlled in the laboratory. When phosphate solution and wastewater were used, the reaction times for the filters to remove P were determined to be 5 and 15 minutes, respectively, suggesting that a short residence time is required. However, breakthrough in this study occurred unexpectedly quickly, implying that more time is needed for the P that has reacted to be physically retained in the filter.     

Human DNA Polymerase ν Catalyzes Correct and Incorrect DNA Synthesis with High Catalytic Efficiency

DNA polymerase ν (pol ν) is a low fidelity A-family polymerase with a putative role in interstrand cross-link repair and homologous recombination. We carried out pre-steady-state kinetic analysis to elucidate the kinetic mechanism of this enzyme. We found that the mechanism consists of seven steps, similar that of other A-family polymerases. pol ν binds to DNA with a K_d for DNA of 9.2 nm, with an off-rate constant of 0.013 s⁻¹and an on-rate constant of 14 μm⁻¹ s⁻¹. dNTP binding is rapid with K_d values of 20 and 476 μm for the correct and incorrect dNTP, respectively. Pyrophosphorylation occurs with a K_d value for PP_i of 3.7 mm and a maximal rate constant of 11 s⁻¹. Pre-steady-state kinetics, examination of the elemental effect using dNTPαS, and pulse-chase experiments indicate that a rapid phosphodiester bond formation step is flanked by slow conformational changes for both correct and incorrect base pair formation. These experiments in combination with computer simulations indicate that the first conformational change occurs with rate constants of 75 and 20 s⁻¹; rapid phosphodiester bond formation occurs with a K_eq of 2.2 and 1.7, and the second conformational change occurs with rate constants of 2.1 and 0.5 s⁻¹, for correct and incorrect base pair formation, respectively. The presence of a mispair does not induce the polymerase to adopt a low catalytic conformation. pol ν catalyzes both correct and mispair formation with high catalytic efficiency.