Dietary Inference from Upper and Lower Molar Morphology in Platyrrhine Primates

The correlation between diet and dental topography is of importance to paleontologists seeking to diagnose ecological adaptations in extinct taxa. Although the subject is well represented in the literature, few studies directly compare methods or evaluate dietary signals conveyed by both upper and lower molars. Here, we address this gap in our knowledge by comparing the efficacy of three measures of functional morphology for classifying an ecologically diverse sample of thirteen medium- to large-bodied platyrrhines by diet category (e.g., folivore, frugivore, hard object feeder). We used Shearing Quotient (SQ), an index derived from linear measurements of molar cutting edges and two indices of crown surface topography, Occlusal Relief (OR) and Relief Index (RFI). Using SQ, OR, and RFI, individuals were then classified by dietary category using Discriminate Function Analysis. Both upper and lower molar variables produce high classification rates in assigning individuals to diet categories, but lower molars are consistently more successful. SQs yield the highest classification rates. RFI and OR generally perform above chance. Upper molar RFI has a success rate below the level of chance. Adding molar length enhances the discriminatory power for all variables. We conclude that upper molar SQs are useful for dietary reconstruction, especially when combined with body size information. Additionally, we find that among our sample of platyrrhines, SQ remains the strongest predictor of diet, while RFI is less useful at signaling dietary differences in absence of body size information. The study demonstrates new ways for inferring the diets of extinct platyrrhine primates when both upper and lower molars are available, or, for taxa known only from upper molars. The techniques are useful in reconstructing diet in stem representatives of anthropoid clade, who share key aspects of molar morphology with extant platyrrhines.     

The relationship between diet and tooth complexity in living dentigerous saurians

Living saurian reptiles exhibit a wide range of diets, from carnivores to strict herbivores. Previous research suggests that the tooth shape in some lizard clades correlates with diet, but this has not been tested using quantitative methods. I investigated the relationship between phenotypic tooth complexity and diet in living reptiles by examining the entire dentary tooth row in over 80 specimens comprising all major dentigerous saurian clades. I quantified dental complexity using orientation patch count rotated (OPCR), which discriminates diet in living and extinct mammals, where OPCR‐values increase with the proportion of dietary plant matter. OPCR was calculated from high‐resolution CT‐scans, and I standardized OPCR‐values by the total number of teeth to account for differences in tooth count across taxa. In contrast with extant mammals, there appears to be greater overlap in tooth complexity values across dietary groups because multicusped teeth characterize herbivores, omnivores, and insectivores, and because herbivorous skinks have relatively simple teeth. In particular, insectivorous lizards have dental complexities that are very similar to omnivores. Regardless, OPCR‐values for animals that consume significant amounts of plant material are higher than those of carnivores, with herbivores having the highest average dental complexity. These results suggest reptilian tooth complexity is related to diet, similar to extinct and extant mammals, although phylogenetic history also plays a measurable role in dental complexity. This has implications for extinct amniotes that display a dramatic range of tooth morphologies, many with no modern analogs, which inhibits detailed dietary reconstructions. These data demonstrate that OPCR, when combined with additional morphological data, has the potential to be used to reconstruct the diet of extinct amniotes. J. Morphol. 278:500–522, 2017. © 2017 Wiley Periodicals, Inc.     

Platyrrhine incisors and diet

Despite the relatively large size of anthropoid incisors in relation to the remainder of the dental arcade, and their prominent role in the preprocessing of food prior to ingestion, comparatively little is known about the functional morphology of anthropoid incisor shape and crown curvature. The relationship between incisor allometry and diet is well documented for both platyrrhines and catarrhines; however, similar relationships between incisor shape and crown curvature have to date only been reported for living and fossil members of the superfamily Hominoidea. Given the limited taxonomic diversity among the extant members of that group, it is difficult to firmly establish the relative influence of phylogeny and dietary function in the governance of incisor crown curvature. Unlike hominoids, which are represented by only five living genera, extant platyrrhines are a more varied group that includes 16 ecologically diverse genera. In an effort to clarify the functional relationship between maxillary and mandibular incisor crown curvature and diet, this study uses high resolution polynomial curve fitting to quantify mesiodistal and cervicoincisal curvature for a taxonomically diverse platyrrhine sample (n = 133 individuals representing 18 taxa) with well documented dietary behavior. Results were consistent with prior analyses of hominoid incisor curvature and identify a significant and positive correlation between incisor crown curvature and diet such that increasing curvature is associated with a proportionate increase in frugivory. These results are independent confirmation of the results reported from a previous analysis of hominoid incisor curvature and provide new evidence to suggest that diet is the primary governing factor influencing anthropoid incisor curvature.     

Comparing Dirichlet normal surface energy of tooth crowns, a new technique of molar shape quantification for dietary inference, with previous methods in isolation and in combination

Inferred dietary preference is a major component of paleoecologies of extinct primates. Molar occlusal shape correlates with diet in living mammals, so teeth are a potentially useful structure from which to reconstruct diet in extinct taxa. We assess the efficacy of Dirichlet normal energy (DNE) calculated for molar tooth surfaces for reflecting diet. We evaluate DNE, which uses changes in normal vectors to characterize curvature, by directly comparing this metric to metrics previously used in dietary inference. We also test whether combining methods improves diet reconstructions. The study sample consisted of 146 lower (mandibular) second molars belonging to 24 euarchontan taxa. Five shape quantification metrics were calculated on each molar: DNE, shearing quotient, shearing ratio, relief index, and orientation patch count rotated (OPCR). Statistical analyses were completed for each variable to assess effects of taxon and diet. Discriminant function analysis was used to assess ability of combinations of variables to predict diet. Values differ significantly by diets for all variables, although shearing ratios and OPCR do not distinguish statistically between insectivores and folivores or omnivores and frugivores. Combined analyses were much more effective at predicting diet than any metric alone. Alone, relief index and DNE were most effective at predicting diet. OPCR was the least effective alone but is still valuable as the only quantitative measure of surface complexity. Of all methods considered, DNE was the least methodologically sensitive, and its effectiveness suggests it will be a valuable tool for dietary reconstruction.     

Relief index of second mandibular molars is a correlate of diet among prosimian primates and other euarchontan mammals

This study describes and tests a new method of calculating a shape metric known as the relief index (RFI) on lower second molars of extant euarchontan mammals, including scandentians (treeshrews), dermopterans (flying lemurs), and prosimian primates (strepsirhines and tarsiers). RFI is the ratio of the tooth crown three-dimensional area to two-dimensional planar area. It essentially expresses hypsodonty and complexity of tooth shape. Like other measurements of complexity, RFI ignores taxon-specific features, such as certain cusps and crests, which are usually considered in more traditional studies of tooth function. Traditional statistical analyses of the study sample show that RFI distinguishes taxa with differing amounts of structural carbohydrates in their diets, with frugivore/gramnivores being significantly lower in RFI than omnivores, and insectivores/folivores being significantly higher in RFI than the other two. Information on absolute size, or body mass, is needed to reliably parse out insectivores and folivores; however, if the study sample is limited to Primates, RFI alone distinguishes many folivores (lower) from insectivores (higher). Finally, phylogenetically independent contrasts of RFI and dietary preference are strongly correlated with one another, indicating that variance in RFI is better explained by dietary diversity than phylogenetic affinity in this sample. Because of the accuracy and phylogenetic insensitivity of the RFI among Euarchonta, this method can be applied to fossil primates and stem-primates (plesiadapiforms) and used to elucidate and compare their dietary preferences. Such comparisons are important for developing a more detailed view of primate evolution.     

Lower molar shape and size in prosimian and platyrrhine primates

The goal of this research is to evaluate the relative strength of the influences of diet, size, and phylogenetic signal on dental geometric shape. Accurate comprehension of these factors and their interaction is important for reconstructing diet and deriving characters for a cladistic analysis in fossil primates. Geometric morphometric analysis is used to identify axes of shape variation in the lower second molars of (a) prosimian primates and (b) platyrrhines. Landmarks were placed on µCT‐generated surface renderings. Landmark configurations were aligned using generalized Procrustes analysis. Principal components analysis and phylogenetic principal components analysis (pPCA) were performed on species average landmark co‐ordinates. pPCs were examined with phylogenetic generalized least squares analysis for association with size and with diet. PCs from both phylogenetic and non‐phylogenetic analyses were sufficient to separate species by broad dietary categories, including insectivores and folivores. In neither analysis was pPC1 correlated with tooth size, but some other pPCs were significantly correlated with size. The pattern of association between pPCs and size altered when centroid size and dietary variables were combined in the model; effects of diet factors typically exceeded effects of size. These results indicate a dominant phylogenetic and dietary signal in molar shape but also show some shape change correlated with size in the absence of obvious dietary associations. Geometric morphometric analysis appears to be useful for tracking functional traits in molars, particularly in tracking differences between folivorous and insectivorous species.     

Dental topography indicates ecological contraction of lemur communities

Understanding the paleoecology of extinct subfossil lemurs requires reconstruction of dietary preferences. Tooth morphology is strongly correlated with diet in living primates and is appropriate for inferring dietary ecology. Recently, dental topographic analysis has shown great promise in reconstructing diet from molar tooth form. Compared with traditionally used shearing metrics, dental topography is better suited for the extraordinary diversity of tooth form among subfossil lemurs and has been shown to be less sensitive to phylogenetic sources of shape variation. Specifically, we computed orientation patch counts rotated (OPCR) and Dirichlet normal energy (DNE) of molar teeth belonging to 14 species of subfossil lemurs and compared these values to those of an extant lemur sample. The two metrics succeeded in separating species in a manner that provides insights into both food processing and diet. We used them to examine the changes in lemur community ecology in Southern and Southwestern Madagascar that accompanied the extinction of giant lemurs. We show that the poverty of Madagascar's frugivore community is a long-standing phenomenon and that extinction of large-bodied lemurs in the South and Southwest resulted not merely in a loss of guild elements but also, most likely, in changes in the ecology of extant lemurs.     

Dental topography and diets of platyrrhine primates

Abstract

More than half a century ago, Percy Butler touted the importance of analyzing teeth to understand their function in an evolutionary context. There have been many advances in the study of dental functional morphology since that time. Here we review the various approaches to characterizing and comparing occlusal form that have been developed, especially dental topographic analysis. We also report on a new study of dental topography of platyrrhine primates (n = 341 individuals representing 16 species) with known differences in both dietary preferences and other food items eaten. Results indicate frugivores, gummivores, folivores, and seed eaters each have a unique combination of slope, relief, angularity, sharpness, and occlusal orientation patch size and count values. Likewise, among frugivores, those that supplement their diets with hard objects, insects, leaves, and seeds, also each have a distinctive suite of topographic features. We conclude that both primary and secondary diet choices select for occlusal form, and that functional morphology more reflects the types of foods and mechanical challenges they pose rather than the frequencies in which they are eaten.     

MorphoTester: An Open Source Application for Morphological Topographic Analysis

The increased prevalence and affordability of 3D scanning technology is beginning to have significant effects on the research questions and approaches available for studies of morphology. As the current trend of larger and more precise 3D datasets is unlikely to slow in the future, there is a need for efficient and capable tools for high-throughput quantitative analysis of biological shape. The promise and the challenge of implementing relatively automated methods for characterizing surface shape can be seen in the example of dental topographic analysis. Dental topographic analysis comprises a suite of techniques for quantifying tooth surfaces and component features. Topographic techniques have provided insight on mammalian molar form-function relationships and these methods could be applied to address other topics and questions. At the same time implementing multiple complementary topographic methods can have high time and labor costs, and comparability of data formats and approaches is difficult to predict. To address these challenges I present MorphoTester, an open source application for visualizing and quantifying topography from 3D triangulated polygon meshes. This application is Python-based and is free to use. MorphoTester implements three commonly used dental topographic metrics–Dirichlet normal energy, relief index, and orientation patch count rotated (OPCR). Previous OPCR algorithms have used raster-based grid data, which is not directly interchangeable with vector-based triangulated polygon meshes. A 3D-OPCR algorithm is provided here for quantifying complexity from polygon meshes. The efficacy of this metric is tested in a sample of mandibular second molars belonging to four species of cercopithecoid primates. Results suggest that 3D-OPCR is at least as effective for quantifying complexity as previous approaches, and may be more effective due to finer resolution of surface data considered here. MorphoTester represents an advancement in the automated quantification of morphology, and can be modified to adapt to future needs and priorities.     

Evolution and function of the upper molar talon and its dietary implications in microbats

The evolution of mammalian molars has been marked by transitions representing significant changes in shape and function. One such transition is the addition and elaboration of the talon, the distolingual region of the ancestral tribosphenic upper molar of therian mammals and some extinct relatives. This study uses suborder Microchiroptera as a case study to explore the adaptive implications of the expansion of the talon on the tribosphenic molar, specifically focusing on the talon's role in the compression and shear of food during breakdown. Three‐dimensional computer renderings of casts of the upper left first molars were created for microbat species of a variety of dietary categories (frugivore, etc.) and physical properties of food (hard and soft). Relief Index (RFI) was measured to estimate the topography and function of the whole tooth and of the talon and trigon (the remaining primitive tribosphenic region) individually, in order to examine 1) how the shape of the whole tooth, trigon, and talon reflects the compromise between their crushing and shearing functions, 2) how whole tooth, trigon, and talon function differs according to diet, and 3) how the presence of the talon affects overall molar function. Results suggest that RFI of both the whole tooth and the trigon varies according to dietary groups, with frugivores having greater crushing function when compared with the other groups. The talon, however, consistently has low RFI (a flatter topography), and its presence lowers the RFI of the whole tooth across all dietary categories, suggesting that the talon is primarily functioning in crushing during food breakdown. The potential benefits of a crushing talon for microbats of various dietary groups are discussed. J. Morphol. 276:1368–1376, 2015. © 2015 Wiley Periodicals, Inc.     

Dental scaling in the callitrichinae

Callitrichines share several morphological features that appear to be derived among anthropoid primates. One view maintains that some of them are the consequence of a rapid reduction in body size in the common ancestor of callitrichines. This hypothesis predicts that callitrichines should have relatively large teeth for their body size in comparison to other platyrrhines. Dental metric data from 18 platyrrhine species, including 4 callitrichines, is used to test this hypothesis. Callitrichine tooth size is compared both to empirical regressions of tooth size against body weight for noncallitrichine platyrrhines and to a prediction of geometric similarity. In neither comparison do callitrichines as a group show significantly greater tooth size than other platyrrhines. In fact, three of the four genera seem to have relatively small teeth for their body size. While this study fails to support the hypothesis that the common ancestor of callitrichines underwent a rapid reduction in body size, it neither proves nor disproves the hypothesis that they are smaller than their last common ancestor.     

Dental topography and diets of four old world monkey species

Dental topographic analysis allows comparisons of variably worn teeth within and between species to infer relationships between dental form and diet in living primates, with implications for reconstructing feeding adaptations of fossil forms. Although analyses to date have been limited mainly to the M₂s of a few primate taxa, these suggest that dental topographic analysis holds considerable promise. Still, larger samples including a greater range of species and different tooth types are needed to determine the potential of this approach. Here we examine dental topography of molar teeth of Cercocebus torquatus (n=48), Cercopithecus campbelli (n=50), Colobus polykomos (n=50), and Procolobus badius (n=50). This is the first such study of large samples of Old World monkeys, and the first to include analyses of both M₁s and M₂s. Average slope, relief, and surface angularity were computed and compared among tooth types, wear stages, and species. Results suggest that (1) data for M₁s and M₂s cannot be compared directly; (2) slope and relief decline with wear on M₂s of all taxa, and M₁s of the colobines, whereas angularity does not generally change except in the most worn specimens; and (3) folivorous colobines tend to have more sloping surfaces and more relief than do frugivorous cercopithecines, though angularity does not clearly separate taxa by diet. Am. J. Primatol. 71:466–477, 2009. © 2009 Wiley‐Liss, Inc.     

New specimens of Oligopithecus savagei, early Oligocene primate from the Fayum, Egypt

New specimens of the early Oligocene anthropoidean, Oligopithecus savagei, from the Fayum, Egypt, include unworn specimens of lower teeth plus the first known upper molar, premolar, and incisor. These finds confirm the anthropoidean status of Oligopithecus. Comparisons with other Fayum taxa suggest that Oligopithecus is more closely related to Propliopithecidae than to Parapithecidae. Dental similarities between Oligopithecus and early platyrrhines are probably primitive retentions that do not support the hypothesis of an Oligocene trans-Atlantic crossing by primates. Among prosimians, the upper teeth of Oligopithecus very closely resemble those of Protoadapis and allied forms (Europolemur, Mahgarita, Periconodon, Hoanghonius), but differ substantially from other prosimian taxa. Most of the dental and osteological resemblances between Oligopithecus and the Protoadapis group are derived features, thus favoring the hypothesis that Oligopithecus and other Anthropoidea are descended from Adapidae.     

Diet and dental topography in pitheciine seed predators

Pitheciines (Pithecia, Chiropotes, and Cacajao) are a specialized clade of Neotropical seed predators that exhibit postcanine teeth with low and rounded cusps and highly crenulated occlusal surface enamel. Data on feeding ecology show that Pithecia consumes proportionally more leaves than other pitheciine species, and comparative studies demonstrate its greater molar relief and relative shearing potential. However, data on pitheciine food mechanics show that Pithecia masticates seeds with greater crushing resistance than those preferred by Chiropotes. This variation predicts an opposing morphology characterized by low and more rounded occlusal surfaces in Pithecia. We build on previous research using new methods for molar surface shape quantification by examining pitheciine second molar shearing crest length, occlusal relief, surface complexity, and surface curvature relative to nonseed specializing platyrrhines and within the context of the observed interspecific variation in pitheciine feeding ecology. Consistent with the previous analyses, our findings demonstrate that pitheciine molars exhibit low shearing, relief, and curvature compared with nonseed predators, independent of phylogeny. Pitheciines also exhibit highly “complex” occlusal topography that promotes the efficient breakdown of tough seed tissues. Overall, Pithecia, Chiropotes, and Cacajao share a similar topographic pattern, suggesting adaptation to foods with similar structural and/or mechanical properties. However, Cacajao differs in surface complexity, which reflects some variation in its feeding ecology. Contrary to the predictions, Pithecia and Chiropotes do not differ in any of the topographic variables examined. The range of demands imposed on the postcanine teeth of Pithecia might therefore select for an average topography, one that converges on that of Chiropotes. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc.     

Description of the cytochrome c oxidase subunit II gene in some genera of New World monkeys (primates,Platyrrhini)

Nucleotide sequence variation at the mitochondrial cytochrome c oxidase subunit II gene (COII) was analyzed in 27 New World monkey specimens, nine newly reported herein. The study involved comparisons among platyrrhines and also between platyrrhines and catarrhines. The analysis of the frequencies of transitions and transversions at each codon position showed transitional saturation at third codon position. Neighbor-Joining trees obtained from genetic distances estimated by means of Kimura's (1980) two-parameter model showed poor resolution of phylogenetic relationships among platyrrhine genera. Rates of nucleotide substitutions were largely homogeneous except in the genus Saimiri that showed low numbers of unique substitutions suggesting the maintenance of ancestral or plesiomorphic states of platyrrhine mt DNA nucleotide characters probably due to its large population sizes as compared to other platyrrhines.     

Diets of fossil primates from the Fayum Depression of Egypt: a quantitative analysis of molar shearing

Over the last 90 years, Eocene and Oligocene aged sediments in the Fayum Depression of Egypt have yielded at least 17 genera of fossil primates. However, of this diverse sample the diets of only four early Oligocene anthropoid genera have been previously studied using quantitative methods. Here we present dietary assessments for 11 additional Fayum primate genera based on the analysis of body mass and molar shearing crest development. These studies reveal that all late Eocene Fayum anthropoids were probably frugivorous despite marked subfamilial differences in dental morphology. By contrast, late Eocene Fayum prosimians demonstrated remarkable dietary diversity, including specialized insectivory (Anchomomys), generalized frugivory (Plesiopithecus), frugivory+insectivory (Wadilemur), and strict folivory (Aframonius). This evidence that sympatric prosimians and early anthropoids jointly occupied frugivorous niches during the late Eocene reinforces the hypothesis that changes in diet did not form the primary ecological impetus for the origin of the Anthropoidea. Early Oligocene Fayum localities differ from late Eocene Fayum localities in lacking large-bodied frugivorous and folivorous prosimians, and may document the first appearance of primate communities with trophic structures like those of extant primate communities in continental Africa. A similar change in primate community structure during the Eocene-Oligocene transition is not evident in the Asian fossil record. Putative large anthropoids from the Eocene of Asia, such as Amphipithecus mogaungensis, Pondaungia cotteri, and Siamopithecus eocaenus, share with early Oligocene Fayum anthropoids derived features of molar anatomy related to an emphasis on crushing and grinding during mastication. However, these dental specializations are not seen in late Eocene Fayum anthropoids that are broadly ancestral to the later-occurring anthropoids of the Fayum's upper sequence. This lack of resemblance to undisputed Eocene African anthropoids suggests that the "progressive" anthropoid-like dental features of some large-bodied Eocene Asian primates may be the result of dietary convergence rather than close phyletic affinity with the Anthropoidea.     

Platyrrhine dental eruption sequences

To determine dental eruption sequences of extant platyrrhines, 367 mandibles and maxillae of informative juvenile specimens from all 16 genera were scored for presence of permanent teeth including three intermediate eruption stages following Harvati (Am J Phys Anthropol 112 (2000) 69-85). The timing of molar eruption relative to that of the anterior dentition is variable in platyrrhines. Aotus is precocious, with all molars erupting in succession before replacement of any deciduous teeth, while Cebus is delayed in M2-3 eruption relative to I1-2. Callitrichines have a distinct tendency toward delayed canine and premolar development. Platyrrhine eruption sequences presented here show some evidence of conformity to Schultz's Rule, with relatively early replacement of deciduous dentition in "slower"-growing animals. The relationship of dental eruption sequences to degree of folivory, body mass, brain mass, and dietary quality is also examined. The early eruption of molars relative to anterior teeth in Pithecia, Chiropotes, and Cacajao, in comparison to genera such as Ateles, Lagothrix, and Alouatta, showing relatively later eruption of the molars, appears to be consistent with current phylogenetic hypotheses. Schultz (Am J Phys Anthropol 19 (1935) 489-581) postulated early relative molar eruption as the primitive dental eruption schedule for primates. The extremely early molar eruption of Aotus versus Callicebus (where both incisors erupt before M2 and M3, with M3 usually last) may lend support to the status of Aotus as a basal taxon. The early relative molar eruption of the fossil platyrrhine species Branisella boliviana is also consistent with this hypothesis (Takai et al.: Am J Phys Anthropol 111 (2000) 263-281).     

The anatomy of Dolichocebus gaimanensis, a stem platyrrhine monkey from Argentina

Dolichocebus is known from the type skull encased in a concretion, numerous isolated teeth, parts of two mandibles, and a talus. The specimens come from the Trelew Member (early Miocene, Colhuehuapian South American Land Mammal Age) of the Sarmiento Formation near the village of Gaiman, Chubut Province, Argentina, dated to about 20Ma. We describe all Dolichocebus fossil material using conventional surface anatomy and micro-CT data from the cranium. The new material and newly imaged internal anatomy of the skull demonstrate that anatomical characters hitherto supposed to support a phyletic link between Dolichocebus and either callitrichines (marmosets, tamarins, and Callimico) or Saimiri (squirrel monkeys) are either indeterminate or absent. To more fully explore the phyletic position of Dolichocebus, we undertook a comprehensive phylogenetic analysis. We examined 268 characters of the cranium and dentition of 16 living platyrrhine genera, some late Oligocene and early Miocene platyrrhines, Tarsius, some Eocene and Oligocene stem anthropoids, and several extant catarrhines. These analyses consistently indicate that Dolichocebus is a stem platyrrhine, as are late Oligocene Branisella and early Miocene Tremacebus, Soriacebus, and Carlocebus. Platyrrhine evolution often is conceived of as a single ancient adaptive radiation. Review of all available phyolgenetic data suggests a more layered evolutionary pattern, with several independent extinct clades filling modern platyrrhine niche space, and modern platyrrhine families and subfamilies appearing over a nine-million-year interval in the Miocene. The outcome of these analyses highlights the pervasiveness of homoplasy in dental and cranial characters. Homoplasy is a real evolutionary phenomenon that is present at all levels of biological analysis, from amino-acid sequences to aspects of adult bony morphology, behavior, and adaptation.     

Dietary adaptations in the teeth of murine rodents (Muridae): a test of biomechanical predictions

Functional dental theory predicts that tooth shape responds evolutionarily to the mechanical properties of food. Most studies of mammalian teeth have focused on qualitative measures of dental anatomy and have not formally tested how the functional components of teeth adapt in response to diet. Here we generated a series of predictions for tooth morphology based on biomechanical models of food processing. We used murine rodents (Old World rats and mice) to test these predictions for the relationship between diet and morphology and to identify a suite of functional dental characteristics that best predict diets. One hundred and five dental characteristics were extracted from images of the upper and lower tooth rows and incisors for 98 species. After accounting for phylogenetic relationships, we showed that species evolving plant‐dominated diets evolved deeper incisors, longer third molars, longer molar crests, blunter posteriorly angled cusps, and more expanded laterally oriented occlusal cusps than species adapting to animal‐dominated diets. Measures of incisor depth, crest length, cusp angle and sharpness, occlusal cusp orientation, and the lengths of third molars proved the best predictors of dietary adaptation. Accounting for evolutionary history in a phylogenetic discriminant function analysis notably improved the classification accuracy. Molar morphology is strongly correlated with diet and we suggest that these dental traits can be used to infer diet with good accuracy for both extinct and extant murine species.     

Common solutions to resolve different dietary challenges in the ruminant dentition: The functionality of bovid postcanine teeth as a masticatory unit

Plasticity of tooth shape in mammals is of great adaptive value for the efficient exploitation of specific feeding niches and is a crucial mechanism for ecological diversification. In this study, we aimed to infer chewing effectiveness from the functional shape of different postcanine teeth within bovids, the most diverse extant group of large herbivorous mammals. We consider the postcanine dentition as a masticatory unit and test for differences related to food biomechanical properties, dietary abrasiveness, and chewing dynamics. We compare functional properties of the postcanine tooth row among species with well‐known dietary strategies by integrating digitalization of high‐resolution occlusal surface 3D‐models of upper postcanine dentitions and quantification of the indentation index (D), a structural parameter representing enamel complexity. We test for differences in the occlusal shape among tooth positions in the postcanine dentition using robust, heteroscedastic tests in a one‐way analysis of variance. Our results show three distinct patterns of enamel complexity along the tooth row: (1) D is more homogeneously distributed among tooth positions; (2) D increases gradually in the mesiodistal axis along the tooth row; and (3) D increases abruptly only at the transition between premolars and molars. We interpreted these patterns as different adaptive configurations of the postcanine tooth row relating to diet. Grass‐ and fruit‐eating bovids show the same abrupt increase in enamel complexity at the transition from premolars to molars. Intermediate feeding and leaf‐browsing species show the same gradual, mesiodistal increase in complexity along the tooth row. The absolute physical dietary resistance (biomechanical properties plus abrasiveness) and its relation to mechanical constraints of the chewing stroke are the likely selective factors leading to convergence of enamel complexity patterns along the tooth row among taxa with different diets. J. Morphol. 275:328–341, 2014. © 2013 Wiley Periodicals, Inc.