聚乙二醇对羟基丁酸和羟基己酸共聚物的共混改性研究

本研究以聚羟基脂肪酸酯家族中的新成员羟基丁酸和羟基己酸共聚物（PHBHHx）为基础,采用与聚乙二醇（PEG）共混的方法对其进行改性,研究结果证实：PHBHHx与PEG 共混物中比例为3:1及2:1时,两者完全物理相容。而PEG在共混物中比例升高时则导致相分离,成为部分相容体系。PEG掺入显著提高材料亲水性及表面自由能,使血管平滑肌细胞（RaSMCs）及血管内皮细胞（HUVECs）的细胞粘附及增殖大幅度提高,并且均具有一定的PEG含量依赖性。其中对RaSMCs的作用最为明显,RaSMCs能在PEG/PHBHHx比例为1:1的共混膜（E1X1）上持续增殖至融合,而HUVECs则呈粘附较差的类球形形貌,证实E1X1可以潜在应用于复合血管组织工程支架中的近内膜基材。     

重组嗜水气单胞菌Aeromonas hydrophila 4AK4中3-羟基丁酸3-羟基己酸共聚酯PHBHHx的发酵生产

3-羟基丁酸和3-羟基己酸共聚酯(PHBHHx)是一种性能优良的新型生物可降解材料,其机械和加工性能与3-羟基己酸(3HHx)在共聚物中的含量密切相关。在嗜水气单孢菌Aeromonas hydrophila 4AK4中引入了编码β-酮基硫解酶(β-ketothiolase)的phbA基因和编码乙酰乙酰辅酶A还原酶(Acetoacetyl-CoA reductase)的phbB基因,使重组菌增加了一条利用乙酰辅酶A合成3-羟基丁酸-CoA的代谢途径,这使得利用非相关性碳源调控PHBHHx的单体组成比例成为可能。利用葡萄糖酸钠和月桂酸作为碳源,对重组Aeromonas hydrophila 4AK4进行了摇瓶培养及5L发酵罐培养的研究。在摇瓶实验中,通过改变碳源中两种组分的比例,可以使A,hydrophila 4AK4合成的PHBHHx中的3HHx摩尔含量由原来的15％左右降低到3％～12％,成功地实现了对PHBHHx单体组成的调控;当以月桂酸为唯一碳源时,在5L发酵罐中,经过56h的培养,获得了51．5g／L的细胞干重(CDW),其中62％为PHBHHx,3HHx在PHBHHx中的摩尔含量为9．7％;当以1：1的葡萄糖酸钠和月桂酸为碳源时,48h的5L发酵罐培养获得了32．8g／L的CDW和52％的PHBHHx含量,其中3HHx在PHBHHx中的摩尔含量为6．7％。结果证明了该重组菌在大规模生产单体组成可控PHBHHx方面具有很大的应用潜力。     

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) supports adhesion and migration of mesenchymal stem cells and tenocytes

AIM: To establish the potential of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) as a material for tendon repair. METHODS: The biocompatibility of PHBHHx with both rat tenocytes (rT) and human mesenchymal stem cells (hMSC) was explored by monitoring adhesive characteristics on films of varying weight/volume ratios coupled to a culture atmosphere of either 21% O2 (air) or 2% O2 (physiological normoxia). The diameter and stiffness of PHBHHx films was established using optical coherence tomography and mechanical testing, respectively. RESULTS: Film thickness correlated directly with weight/volume PHBHHx (r2 = 0.9473) ranging from 0.1 mm (0.8% weight/volume) to 0.19 mm (2.4% weight/volume). Film stiffness on the other hand displayed a biphasic response which increased rapidly at values 1.6% weight/volume. Optimal cell attachment of rT required films of ≥ 1.6% and ≥ 2.0% weight/volume PHBHHx in 2% O2 and 21% O2 respectively. A qualitative adhesion increase was noted for hMSC in films ≥ 1.2% weight/volume, becoming significant at 2% weight/volume in 2% O2. An increase in cell adhesion was also noted with ≥ 2% weight/volume PHBHHx in 21% O2. Cell migration into films was not observed. CONCLUSION: This evaluation demonstrates that PHBHHx is a suitable polymer for future cell/polymer replacement strategies in tendon repair.     

A biomimetic tubular scaffold with spatially designed nanofibers of protein/PDS® bio‐blends

Electrospun tubular conduit (4 mm inner diameter) based on blends of polydioxanone (PDS II®) and proteins such as gelatin and elastin having a spatially designed trilayer structure was prepared for arterial scaffolds. SEM analysis of scaffolds showed random nanofibrous morphology and well‐interconnected pore network. Due to protein blending, the fiber diameter was reduced from 800–950 nm range to 300–500 nm range. Fourier‐transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) results confirmed the blended composition and crystallinity of fibers. Pure PDS scaffold under hydrated state exhibited a tensile strength of 5.61 ± 0.42 MPa and a modulus of 17.11 ± 1.13 MPa with a failure strain of 216.7 ± 13%. The blending of PDS with elastin and gelatin has decreased the tensile properties. A trilayer tubular scaffold was fabricated by sequential electrospinning of blends of elastin/gelatin, PDS/elastin/gelatin, and PDS/gelatin (EG/PEG/PG) to mimic the complex matrix structure of native arteries. Under hydrated state, the trilayer conduit exhibited tensile properties (tensile strength of 1.77 ± 0.2 MPa and elastic modulus of 5.74 ± 3 MPa with a failure strain of 75.08 ± 10%) comparable to those of native arteries. In vitro degradation studies for up to 30 days showed about 40% mass loss and increase in crystallinity due to the removal of proteins and “cleavage‐induced crystallization” of PDS. Biotechnol. Bioeng. 2009; 104: 1025–1033. © 2009 Wiley Periodicals, Inc.     

Engineered Aeromonas hydrophila for enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with alterable monomers composition

Aeromonas hydrophila 4AK4 produces poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) containing 3-hydroxybutyrate (3HB) and about 15 mol% 3-hydroxyhexanoate (3HHx) from dodecanoate. To study the factors affecting the monomer composition and PHBHHx content, genes encoding phasin (phaP), PHA synthase (phaC) and (R)-specific enoyl-CoA hydratase (phaJ) from Aeromonas punctata (formerly named Aeromonas caviae) were introduced individually or jointly into A. hydrophila 4AK4. The phaC gene increased 3HHx fraction more significantly than phaP, while phaJ had little effect. Expression of phaC alone increased the 3HHx fraction from 14 to 22 mol%. When phaC was co-expressed with phaP and phaJ, the 3HHx fraction increased from 14 to 34 mol%. Expression of phaP or phaC alone or with another gene enhanced PHBHHx content up to 64%, cell dry weight (CDW) as much as 4.4 gL(-1) and PHBHHx concentration to 2.7 gL(-1) after 48 h in shake flask culture. The results suggest that a higher PHA synthase activity could lead to a higher 3HHx fraction and PHBHHx content. Co-expression of phaJ with phaC or phaP would favor PHA accumulation, although over-expression of phaJ did not affect PHA synthesis much. In addition, inhibition of beta-oxidation by acrylate in A. hydrophila 4AK4 enhanced PHBHHx content. However, no monomers longer than 3HHx were detected. The results show that genetic modification of A. hydrophila 4AK4 enhanced PHBHHx production and altered monomer composition of the polymer.     

Surface activity and molecular characteristics of cuttlefish skin gelatin modified by oxidized linoleic acid

Surface activity and molecular changes of cuttlefish skin gelatin modified with oxidized linoleic acid (OLA) prepared at 60, 70 and 80 °C at different times were investigated. Modification of gelatin with OLA could improve surface activity of resulting gelatin as evidenced by the decreased surface tension and the increased foaming and emulsifying properties. Interaction between OLA and gelatin led to the generation of carbonyl groups, loss of free amino content and the increase in particle size of resulting gelatin. Emulsion stabilized by modified gelatin had the smaller mean particle diameter with higher stability, compared with that stabilized by gelatin without modification.     

Molecular cloning and functional analysis of two polyhydroxyalkanoate synthases from two strains of Aeromonas hydrophila spp

Polyhydroxyalkanoate (PHA) synthase genes (phaC) were cloned from two Aeromonas hydrophila strains named WQ and 4AK5, respectively. Both strains are able to produce PHBHHx copolyesters consisting of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). Sequence analysis showed that there was only 2 bp difference between these two PHA synthase genes, corresponding to two-amino acid difference at positions of 437 and 458 of the two synthases. PHA productivity and its monomer content produced by A. hydrophila WQ and A. hydrophila 4AK5 were quite different. A. hydrophila WQ accumulated 33% PHBHHx of its cell dry weight (CDW) with 5 mol% 3HHx in the copolyester when cultured in lauric acid for 48 h. Yet A. hydrophila 4AK5 was able to produce 43% PHBHHx of the CDW with 14 mol% 3HHx under the same condition. Hetero-expression of PHA synthase genes of A. hydrophila WQ and A. hydrophila 4AK5, respectively, in Escherichia coli XL1-Blue led to PHBHHx accumulation of 24% and 39% of the CDW and the 3HHx content in PHBHHx were 6 and 15 mol%, respectively. This indicated that the function of these two PHA synthases were different due to these two different residues at positions of 437 and 458. Site specific mutation was carried out to change these two amino acid residues. Results showed that the changes on either of the two amino acids negatively affected the PHA productivity.     

Biomacromolecules electrostatic self-assembly on 3-dimensional tissue engineering scaffold

A poly(ethylenimine) (PEI) was employed to obtain a stable positively charged surface on a poly(D,L-lactide) (PDL-LA) tissue engineering scaffold. An extracellular matrix (ECM)-like biomacromolecule, gelatin, was selected as polyelectrolyte and deposit alternately with PEI on the activated PDL-LA scaffold via ESA technique. The zeta-potential result showed alternating charge of polyelectrolytes (PEI/gelatin) layering on PDL-LA microspheres. Quartz crystal microbalance (QCM) measurement further verified the gradual deposition of PEI/gelatin on the PDL-LA thin film. The combination of PEI aminolysis and the layer-by-layer technique was then explored to construct gelatin coating onto the 3-D porous PDL-LA scaffold. Scanning electronic microscopy showed that there is no notable difference between modified and unmodified PLA scaffolds, with regard to the porosity, pore diameter, and scaffold integration. The dual-tunnel confocal laser scanning microscopy indicated uniform gelatin distribution on the inner surface of the 3-D porous scaffold. The gradual build-up of protein layer on scaffold was investigated by radioiodination technique. Chondrocyte was chosen to test the cell behavior on modified and unmodified PDL-LA scaffolds. The results of the cell viability, total intracellular protein content, and cell morphology on the PEI/gelatin multilayers modified PDL-LA scaffold showed to promote chondrocyte growth. Comparing conventional coating methods, polyelectrolyte multilayers are easy and stable to prepare. It may be a promising choice for the surface modification of complex biomedical devices. These very flexible systems allow broad medical applications for drug delivery and tissue engineering.     

嗜水气单胞菌WQ中PHBHHx的合成及其分子基础研究

聚羟基脂肪酸酯(Polyhydroxyalkanoate,PHA)是一系列生物合成的高分子材料,其单体可由多种3-羟基脂肪酸(3-hydroxyalkanoate,3HA)构成^[1]。PHA物理和机械性能的变化很大,从高脆性到弹性体,这跟它们的单体成分有很大关系^[2]。短链和中长链单体共聚的PHA比短链单体或中长链单体聚合得到的PHA有着更好的性能^[3]。在1994年,豚鼠气单胞菌(Aeromonas caviae)FA440被发现能以偶数碳原子数脂肪酸或植物油作为碳源在体内积累PHBHHx^[4]其PHA生物合成基因被成功克隆^[5]。根据亚基数目和底物特异性,PHA合成的关键酶,即PHA合酶或PhaC,被分成了3种类型。A．caviae的PHA合酶属于第1类PHA合酶^[6]。PHA合酶的一些类型含有一些保守的基因序列,该特征可被用于克隆,特别是第Ⅱ类PHA合酶^[2,8]。嗜水气单胞菌(Aeromonas hydrophila)WQ和A．hydrophila 4AK4是能够合成PHBHHx的另外两种菌株,其中A．hydrophila 4AK4已被用作大规模生产PHBHHx。就目前来说,不管生长条件怎么改变,其合成的PHBHHx中3羟基己酸单体(3-hydroxyhexanoate,3HHx)的含量始终在12％～17％之间变化^[9]。而A．hydrophila WQ合成的PHBHHx中则含有6％～14％ 3HHx。本论文研究了A．hydrophila WQ的PHA生物合成及其分子基础。     

Properties of film from splendid squid (Loligo formosana) skin gelatin with various extraction temperatures

Properties of film from splendid squid (Loligo formosana) skin gelatin extracted at different temperatures (50-80°C) were investigated. Tensile strength (TS) and elongation at break (EAB) of films decreased, but water vapour permeability (WVP) increased (P<0.05) as the extraction temperature increased. Increase in transparency value with coincidental decrease in lightness was observed with increasing extraction temperatures. Electrophoretic study revealed that degradation of gelatin became more pronounced with increasing extraction temperatures. As a consequence, their corresponding films had the lower mechanical properties. FTIR spectra of obtained gelatin films revealed the significant loss of molecular order of the triple helix. Thermogravimetric analysis indicated that F80 exhibited the higher heat susceptibility and weight loss. Loosen structure was observed in film prepared from gelatin with increasing extraction temperatures. Thus, the temperature used for gelatin extraction from splendid squid skin directly affected the properties of corresponding films.     

PHBHHx膜表面亲水改性及其与神经干细胞生物相容性

对羟基丁酸-羟基己酸共聚酯(PHBHHx)膜进行表面改性,研究神经干细胞(NSCs)在改性后的PHBHHx膜表面的贴附、增殖及分化情况,为开发新型脑组织工程支架材料奠定基础。采用溶剂挥发法制备PHBHHx膜,扫描电镜观察其表面性状;分别通过脂肪酶处理,NaOH处理的方法对PHBHHx膜进行表面改性,测量接触角以检测膜表面亲水性。分离培养孕14.5 d大鼠胚胎大脑皮质NSCs,接种在表面改性后的PHBHHx膜表面进行体外培养,扫描电镜观察膜表面细胞形态,MTT法检测细胞活力,免疫细胞化学染色观察NSCs存活和分化情况。结果显示,与未处理的PHBHHx膜相比,脂肪酶、NaOH处理能够显著提高PHBHHx膜表面亲水性,增加NSCs在PHBHHx膜表面贴附数量;NSCs在改性后的PHBHHx膜表面能够良好地存活并分化为神经元和胶质细胞。结果提示PHBHHx膜表面碱处理通过提高材料表面亲水性和粗糙程度,增加其与NSCs的生物相容性,改性后的PHBHHx材料是一种非常有潜力的新型脑组织工程支架材料,有望在NSCs移植修复脑损伤中发挥作用。     

Metabolic engineering of Aeromonas hydrophila for the enhanced production of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Wild-type Aeromonas hydrophila 4AK4 produced 35–45 wt.% poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) consisting of 10–15 mol% 3-hydroxyhexanoate (3HHx). To enhance PHBHHx production, vgb gene encoding Vitreoscilla haemoglobin or fadD gene encoding Escherichia coli acyl-CoA synthase was co-expressed with polyhydroxyalkanoates (PHA) synthesis-related genes including phbAB from Wautersia eutropha and phaPCJ from A. hydrophila. Expression of vgb increased PHBHHx content from 46 to 53 wt.% without affecting the polymer monomers composition, whereas fadD increased both PHBHHx content from 46 to 64 wt.% and its 3HHx fraction from 15 to 24 mol%. Co-expression of vgb or fadD gene with PHA-synthesis-related genes generally increased PHBHHx content over 60 wt.%. Co-expression of phbAB with vgb increased PHBHHx content and concentration up to about 70 wt.% and 4.0 g l⁻¹, respectively. Fermentor study also showed that in the recombinants harboring vgb, CDW, PHBHHx concentration and productivity were significantly elevated up to 54 g l⁻¹, 28.5 g l⁻¹ and 0.791 g l⁻¹ h⁻¹, respectively, suggesting that vgb could promote PHA synthesis. In this strain, lac promoter could be used to constitutively express foreign genes such as phbA and phbB encoding β-ketothiolase and NADPH-dependent acetoacetyl-CoA reductase of W. eutropha, respectively, without use of IPTG. The results showed that combined expression of different genes was a successful strategy to enhance PHA production, which could be useful for strain development to construct other recombinant PHA-producing strains.     

Microgrooved poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) affects the phenotype of vascular smooth muscle cells through let-7a-involved regulation of actin dynamics

Cell–substrate interaction is important in tissue engineering. Vascular smooth muscle cells (VSMCs) cultured on the microgrooved surface of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) showed a distinctive polarized morphology and a high expression level of let-7a compared with the flat substrates. LIMK2, a crucial regulator of actin dynamics, was identified as a new target of let-7a. F-Actin content on flat substrates was significantly higher than that on microgrooved ones. Either overexpression of let-7a on flat substrates or inhibited expression on microgrooved substrates can rescue the difference. In accord with actin dynamics, the expressions of contractile smooth muscle markers, such as SM22 and SMA, decreased in VSMCs cultured on microgrooved substrates compared to those on flat ones, though PHBHHx can induce the synthetic-to-contractile phenotype shift. These results indicate that microgrooved PHBHHx could enhance actin dynamics of VSMCs through let-7a-involved regulation and trigger a synthetic shift.     

Production of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) from Gluconate and Glucose by Recombinant Aeromonas hydrophila and Pseudomonas putida

Aeromonas hydrophila 4AK4 and Pseudomonas putida GPp104 were genetically engineered to synthesize poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) using gluconate and glucose rather than fatty acids. A truncated tesA gene, encoding cytosolic thioesterase I of Escherichia coli which catalyzes the conversion of acyl-ACP into free fatty acids, was introduced into A. hydrophila 4AK4. When grown in gluconate, the recombinant A. hydrophila 4AK4 synthesized 10% (w/w) PHBHHx containing 14% (mol/mol) 3-hydroxyhexanoate. If additional PHBHHx synthesis genes, phaPCJ, were over-expressed with the truncated tesA in A. hydrophila 4AK4, the PHBHHx content increased to 15% (w/w) and contained 19% (mol/mol) 3-hydroxyhexanoate. Recombinant P. putida GPp104 harboring phaC encoding PHBHHx synthase of A. hydrophila, phaB encoding acetoacetyl-CoA reductase of Wautersia eutropha and phaG encoding 3-hydroxyacyl-ACP-CoA transferase of P. putida, synthesized 19% (w/w) PHBHHx containing 5% (mol/mol) 3-hydroxyhexanoate from glucose. The results suggest that the engineered pathways were applicable to synthesize PHBHHx from unrelated carbon sources such as gluconate and glucose.     

Characterization of citric acid/glycerol co-plasticized thermoplastic starch prepared by melt blending

A novel citric acid (CA)–glycerol co-plasticized thermoplastic starch (CGTPS) was prepared by melt blending. The CA content varies from 10% to 40 wt%. Result from Fourier Transform Infrared spectroscopy (FTIR) show that partial esterification occurred during blending. The degrees of substitution and esterification increased as the CA content increased. Results from intrinsic viscosity measurement, laser light scattering (LLS), and FTIR demonstrate the molecular weight of starch decreased as the CA percentage increased. The weight average molecular weight (M_w) of CGTPS with 20 wt% CA was only one-tenth of that without CA under the same processing conditions. Crystal type and crystallinity changes as a function of CA were recorded by X-ray diffraction (XRD). Thermal stability and the glass transition temperature (T_g) were detected by thermogravimetric (TG) and differential scanning calorimeter (DSC). Compared to the traditional GTPS, the novel CGTPS exhibits the special characters of partial esterification, low molecular weight and stronger interaction between starch and plasticizers. These new properties can be expected to prevent retrogradation, promote compatibility with polyesters, improve the processing ability, and adjust the degradation properties.     

聚羟基丁酸己酸酯及其在组织工程中的应用

绍了羟基丁酸酯-羟基己酸酯共聚物的降解性、亲水性、力学性能、表面形态,改性研究、细胞相容性、降解产物的毒性等性能,并对这种材料在组织工程中的应用现状作了阐述,提出了需要改进研究的方向,指出这种微生物来源的新型生物医药材料在组织工程的应用中将具有极大的潜力。     

The properties of gelatin-poly (gamma-glutamic acid) hydrogels as biological glues

The influence of the molecular weight and the type of gelatin (A or B), as well as the molecular weight of poly (gamma-glutamic acid) (gamma-PGA), on the properties of gelatin/gamma-PGA mixed bioadhesives were studied. The gelation of the system was enhanced by a crosslinker, 1-(3-dimethylaminopropyl)-3-(ethylcarbodiimide) hydrochloride (EDC). The gelation time of the bioadhesives was analyzed using rheological measurements. The results indicated that the type of gelatin was a critical factor in determining the gelation time of the biological glues. The mixed glues had greater bonding strength and smaller gelation times as the molecular weight of gamma-PGA or gelatin increased. The swelling ratio decreased and the denaturation temperature increased upon raising the EDC concentration, indicating a greater degree of crosslinking at higher EDC concentrations. The mixed glues crosslinked with various concentrations of EDC (1.7-2.5%) showed no cytotoxicity to fibroblasts. In addition, no significant inflammatory response was observed in the rat subcutaneous implantation. The bioadhesives based on gelatin/gamma-PGA remained at the site for 7 days while the fibrin glue had almost completely degraded. By choosing the appropriate gelatin type and higher molecular weight gamma-PGA in the mixtures, the gelatin/gamma-PGA biological glues could serve as soft tissue adhesives. Rheological characterization was essential in the evaluation of biological glues.     

Effect of ultrasonic treatment on the biochemphysical properties of chitosan

Four chitosans with different molecular weights and degrees of deacetylation degree and 28 chitosans derived from these initial chitosans by ultrasonic degradation have been characterized by gel permeation chromatography (GPC), FT-IR spectroscopy, X-ray diffraction and titrimetric analyses. Antimicrobial activities were investigated against E. coli and S. aureus using an inhibitory rate technique. The results showed that ultrasonic treatment decreased the molecular weight of chitosan, and that chitosan with higher molecular weight and higher DD was more easily degraded. The polydispersity decreased with ultrasonic treatment time, which was in linear relationship with the decrease of molecular weight. Ultrasonic degradation changed the DD of initial chitosan with a lower DD (<90%), but not the DD of the initials chitosan with a higher DD (>90%). The increased crystallinity of ultrasonically treated chitosan indicated that ultrasonic treatment changed the physical structure of chitosan, mainly due to the decrease of molecular weight. Ultrasonic treatment enhanced the antimicrobial activity of chitosan, mainly due to the decrease of molecular weight.     

Production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyhexanoate) with flexible 3-hydroxyhexanoate content in<Emphasis Type="Italic"> Aeromonas hydrophila</Emphasis> CGMCC 0911

Aeromonas hydrophila CGMCC 0911 isolated from lake water was found to be able to synthesize a polyhydroxyalkanoate (PHA) copolymer (PHBHHx) consisting of 3-hydroxybutyrate (HB) and 4–6 mol% 3-hydroxyhexanoate (HHx). The wild-type bacterium accumulated 49% PHBHHx containing 6 mol% HHx in terms of cell dry weight (CDW) when grown on lauric acid for 48 h. When A. hydrophila CGMCC 0911 expressed the Acyl-CoA dehydrogenase gene (yafH) of Escherichia coli, the recombinant strain could accumulate 47% PHBHHx, while the HHx content reached 17.4 mol%. The presence of changing glucose concentration in the culture changed the HHx content both in wild type and recombinant A. hydrophila CGMCC 0911. When 5 g l^–1 glucose was added to a culture containing 5 g l^–1 lauric acid as co-substrate, 45% PHBHHx/CDW consisting of 8.8 mol% HHx was produced by wild-type A. hydrophila CGMCC 0911 compared with only 5% in the absence of glucose. When the recombinant A. hydrophila CGMCC 0911 was grown on a mixed substrate containing lauric acid and 8–10 g l^–1 glucose, the HHx content could be further increased to 35.6 mol%. When the glucose concentration exceeded 10 g l^–1, cell growth, PHA content and mole percentages of HHx in PHBHHx were significantly reduced.     

Blending chitosan with polycaprolactone: effects on physicochemical and antibacterial properties

Chitosan is a well sought-after polysaccharide in biomedical applications and has been blended with various macromolecules to mitigate undesirable properties. However, the effects of blending on the unique antibacterial activity of chitosan as well as changes in fatigue and degradation properties are not well understood. The aim of this work was to evaluate the anti-bacterial properties and changes in physicochemical properties of chitosan upon blending with synthetic polyester poly(epsilon-caprolactone) (PCL). Chitosan and PCL were homogeneously dissolved in varying mass ratios in a unique 77% acetic acid in water mixture and processed into uniform membranes. When subjected to uniaxial cyclical loading in wet conditions, these membranes sustained 10 cycles of predetermined loads up to 1 MPa without break. Chitosan was anti-adhesive to Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans bacteria. Presence of PCL compromised the antibacterial property of chitosan. Four-week degradation studies in PBS/lysozyme at 37 degrees C showed initial weight loss due to chitosan after which no significant changes were observed. Molecular interactions between chitosan and PCL were investigated using Fourier transform infrared spectroscopy (FTIR) which showed no chemical bond formations in the prepared blends. Investigation by wide-angle X-ray diffraction (WAXD) indicated that the crystal structure of individual polymers was unchanged in the blends. Dynamic mechanical and thermal analysis (DMTA) indicated that the crystallinity of PCL was suppressed and its storage modulus increased with the addition of chitosan. Analysis of surface topography by atomic force microscopy (AFM) showed a significant increase in roughness of all blends relative to chitosan. Observed differences in biological and anti-bacterial properties of blends could be primarily attributed to surface topographical changes.