Mapping of RP4 plasmid using deletion mutants of pAS8 hybrid (RP4-ColE1)

Summary We used the hybrid plasmid pAS8 in order to conduct the genetic analysis of RP4 plasmid. The presence of two replicons in the hybrid plasmid permitted to expand the spectrum of deletion mutants of RP4 isolated, which are capable to autonomous replication. The shortening of the hybrid plasmid was achieved by P22 transduction, by induction of deletion mutants using mitomycin C, as well as by selection of Tra^- mutants on the basis of resistance of cells to P-specific phages. These techniques have lead to isolation of clones possessing different combinations of plasmid resistance determinants.Comparison of phenotypic characteristics of deletion plasmids pAS9, pAS10, pAS11, pAS12 and pAS10-2 permitted to propose the map for pAS8 plasmid with the following sequence of markers: trakan-ColE1-amp-tet...Heteroduplex analysis of deletion mutants of pAS8 permitted to construct a physical map and to elaborate in greater detail the functional map of RP4 plasmid. The correlation between the ability of mutants to replicate in polA (TS) strain at nonpermissive conditions and the length of the deleted segment permitted to map rep genes of RP4 on a region with coordinates 9.8–17.3 kb. A relationship between the manifestation of incompatibility of mutants with Inc P-1 plasmids and the length of deletions points out that inc genes are located on DNA region with coordinates 2.1–9.8 kb. The analysis of replication of deletion mutants and the manifestation of incompatibility just as of the data about the size of appropriate deletions permitted to make the conclusion about the functional and genetic independence of the replication control and incompatibility control in RP4 plasmid.     

Conjugal transfer system of plasmid RP4: analysis by transposon 7 insertion.

We have begun an analysis in Escherichia coli of the conjugal transfer functions of the broad-host-range plasmid RP4. We have isolated 19 tra mutants of RP4, generated by insertion of transposon 7, and mapped their insertion sites by restriction endonuclease analysis. These sites fall into two separate regions on either side of the kanamycin resistance determinant. The transfer rates of the mutants range from 10% of that of RP4 to an undetectable level. Spot tests with the P-1 pilus-specific phages PRR1, Pf3, and PR4 and electron microscopic examination for pili have classified the mutants into several phenotypes consistent with their having normal, retracted, or no pili. Analysis of transient plasmid heterozygotes, created by P1 transduction, divided the tra mutants into a minimum of five complementation groups. Some of these groups contain more than one phenotypic class and may represent more than one gene because of the possible polar and deletion effects of Tn7 insertion.     

Physical and functional mapping of two cointegrate plasmids derived from RP4 and TOL plasmid pDK1

Cointegrate plasmids were formed in vivo between the broad-host-range R-plasmid RP4 and two catabolic plasmids derived from Pseudomonas putida HS1. One of these was the wild-type plasmid pDK1 encoding the complete inducible toluene/xylene (TOL) catabolic pathway and one was pDKT1, a deletion derivative of pDK1 selected after growth of HS1 on benzoate and supporting growth on only toluene. The two plasmids formed, pDK2 and pDKT2 respectively, each consisted of a complete RP4 replicon in which was an insert of the parent plasmid DNA respectively 40 and 20 kbp in size. The detailed restriction maps of the two plasmids were determined and many of the catabolic genes were located by subcloning and enzyme assay of recombinant plasmids in Escherichia coli and Pseudomonas hosts. The insert in pDK2 contained both operons of the catabolic pathway, the 'upper pathway' operon (xylCAB) and the meta pathway operon (xylDLEGF(I,J,K)H), and a region identified as having the function of the regulator gene xylS. The insert in pDKT2 contained only the upper pathway operon and the regulatory region. Within each of the three coding regions there was great similarity with the same regions on TOL plasmids pWW0 and pWW53-4 apparent (a) by the same order of the genes, (b) by a similar pattern of restriction sites and (c) by hybridization studies. However, the order and orientations of the three coding regions differed from those previously described for both pWW0 and pWW53-4. The significance of these findings to the evolution of TOL plasmids is discussed.     

Use of deletion mutants of plasmid RP4::D3112 for the genetic analysis of Pseudomonas aeruginosa bacteriophage D3112

The hybrid plasmid RP4::D3112 becomes unstable in Escherichia coli K-12 cells under certain growth conditions. The deletion mutants of this plasmid are formed at a high frequency. All the deletions selected have a specific feature: they start in the left end, at the point of joining of plasmid and phage DNA, and remove different portions of the phage genome. The deletion mutants have been used for genetic mapping of D3112. We have localized the repressor gene cI (0-1.3 kb), 3 early genes (1.3-14.2 kb) and two groups of late genes (14.2-29.9 and 29.9-38 kb). Electron microscope studies of RP4::D3112 DNA and its deletion derivatives have shown that integration of D3112 genome in RP4 occurs through the ends of the genome, without permutations. It appears that bacterial nucleotide sequences joined to DNA from mature D3112 particles, to the right end of D3112 genome, are lost. Thus, transposable phages D3112 of Pseudomonas aeruginosa and E. coli Mu phage have some similarities in the genome organization and in the way of their integration into the host DNA.     

Map of plasmid RP4 derived by insertion of transposon C.

We have determined the location of 36 sites on plasmid RP4 into which transposon C (an 8.5 × 10⁶ molecular weight DNA sequence conferring trimethoprim and streptomycin resistance) had spontaneously inserted itself. These were located by sucrose gradient analysis of EcoRI-generated and then, separately, the HindIII-generated DNA fragments from each RP4-TnC² plasmid. RP4 has a single EcoRI-susceptible site and, suitably displaced from this, a HindIII-susceptible site, whereas TnC has, respectively, one and two sites for these two enzymes. Thus the sizes of the restriction fragments depend on the location and orientation of the inserted TnC.Some of the RP4-TnC clones had lost one of the RP4 characters: transferability (Tra), tetracycline (Tc) or kanamycin (Km) resistances, but no ampicillin (Ap) sensitive clones were detected. Insertions giving each of these phenotypic changes cluster together at positions on the circular RP4 map that presumably locate the genes responsible for the Tra⁺, Km^r and Tc^r phenotypes. The Tra^? plasmids were grouped into four classes on the basis of their conferred phage sensitivities and plasmid copy numbers. The gene giving Ap^r was located by its known proximity to a BamHI-susceptible site. All the plasmids analysed had TnC inserted with one particular orientation. TnC insertions giving no detectable phenotypic change were not randomly placed around RP4, but clustered into certain regions. Two large regions, one containing TnA, had no TnC insertions. Ligation experiments with restriction fragments from various RP4-TnC plasmids led to the conclusion that both these regions contain genes essential to the replication and maintenance of RP4. The location of the HindIII site of RP4 within the gene giving Km^r should prove valuable to the use of this plasmid as a cloning vehicle.     

In vitro insertion of the lambda attachment site into the plasmid RP4.

Summary The region of the phage lambda chromosome containing the attachment site (P · P) and the genes int and xis, excised by the action of endonuclease R.EcoRI, has been inserted into the unique site for that enzyme on the promiscuous conjugative plasmid, RP4, generating the recombinant plasmid RP4att. Transformants containing the hybrid plasmid were recognised by their ability to allow efficient lysogenization by phage b2 (Weil and Signer, 1968; Echols et al., 1968) containing the mutant attachment site · P. The construction and properties of the hybrid plasmid RP4att are described.     

Isolation of TOL and RP4 recombinants by integrative suppression.

We obtained genetic and molecular evidence of non-thermosensitive recombinants of RP4 (Kmr Tcr Cbr/Apr) and the thermosensitive TOL plasmid. As first isolated in Pseudomonas aeruginosa PAO, the recombinant plasmid pTN1 specified noninducible synthesis of TOL enzymes and was transmissible to Escherichia coli on selection for the transfer of kanamycin resistance. The phenotypic expression of TOL genes of pTN1 in E. coli was low and also noninducible. A spontaneous segregant, pTN2, appearing from pTN1, conferred inducible synthesis of TOL enzymes. These plasmids carry all of the TOL determinants as evidenced by the ability of Pseudomonas putida carrying recombinant plasmids to grow on toluene, xylene, and m-toluate. In E. coli the expression of TOL genes with normal regulation (pTN2) appears to be extremely low without induction, and the induced expression is comparable to that with defective regulation (pTN1). The measurement of the molecular weight of pTN2 by electron microscopy gave a value of about 74 X 10(6).     

Protein structural plasticity exemplified by insertion and deletion mutants in T4 lysozyme.

To further investigate the ways in which proteins respond to changes in the length of the polypeptide chain, a series of 32 insertions and five deletions were made within nine different alpha-helices of T4 lysozyme. In most cases, the inserted amino acid was a single alanine, although in some instances up to four residues, not necessarily alanine, were used. Different insertions destabilized the protein by different amounts, ranging from approximately 1 to 6 kcal/mol. In one case, no protein could be obtained. An "extension" mutant in which the carboxy terminus of the molecule was extended by four alanines increased stability by 0.3 kcal/mol. For the deletions, the loss in stability ranged from approximately 3 to 5 kcal/mol. The structures of six insertion mutants, as well as one deletion mutant and the extension mutant, were determined, three in crystal forms nonisomorphous with wild type. In all cases, including previously described insertion mutants within a single alpha-helix, there appears to be a strong tendency to preserve the helix by translocating residues so that the effects of the insertion are propagated into a bend or loop at one end or the other of the helix. In three mutants, even the hydrophobic core was disrupted so as to permit the preservation of the alpha-helix containing the insertion. Translocation (or "register shift") was also observed for the deletion mutant, in this case a loop at the end of the helix being shortened. In general, when translocation occurs, the reduction in stability is only moderate, averaging 2.5 kcal/mol. Only in the most extreme cases does "bulging" or "looping-out" occur within the body of an alpha-helix, in which case the destabilization is substantial, averaging 4.9 kcal/mol. Looping-out can occur for insertions close to the end of a helix, in which case the destabilization is less severe, averaging 2.6 kcal/mol. Mutant A73-[AAA] as well as mutants R119-[A] and V131-[A], include shifts in the backbone of 3-6 A, extending over 20 residues or more. As a result, residues 114-142, which form a "cap" on the carboxy-terminal domain, undergo substantial reorganizations such that the interface between this "cap" and the rest of the protein is altered substantially. In the case of mutant A73-[AAA], two nearby alpha-helices, which form a bend of approximately 105 degrees in the wild-type structure, reorganize in the mutant structure to form a single, essentially straight helix. These structural responses to mutation demonstrate the plasticity of protein structures and illustrate ways in which their three-dimensional structures might changes during evolution.     

Molecular cloning and functional analysis of DNA regions of plasmid RP4 determining the incompatibility properties

Sau3A-generated DNA fragments determining incompatibility functions of the plasmid RP4 were cloned on the vectors pTK16 and pBR322. Inc+ recombinant plasmids were divided into two types: 1) expressing incompatibility only towards the homologous RP4 replicon, 2) expressing incompatibility - both towards the homologous RP4 replicon and towards the heterologous replicons of plasmids R906 and R751. For one member of the first type plasmids it was shown that the cloned Inc+-specific insertion derived from the region of location of the EcoRI restriction site. The majority of the Inc+ recombinant plasmids showed asymmetric expression of incompatibility, predominantly eliminating the resident IncP plasmid.     

Genetic and heteroduplex analysis of deletion mutants of plasmid pAS8]

Heteroduplex analysis of deletion mutants of plasmid pAS8 permitted to construct a physical map and to elaborate in greater detail the genetic map of RP4 plasmid. The correlation between the ability of mutants to replicate in cells lacking functional DNA-polymerase I and the length of the deleted segment permitted to map rep genes of RP4 on DNA region with coordinates 9.8-17.3 kb. A relationship between the manifestation of incompatibility of mutants with IncP-1 plasmids and the length of deletions indicates that inc genes(s) are located on DNA region with coordinates 2.1-9.8 kb. The analysis of replication of deletion mutants and the manifestation of incompatibility just as of the data about the size of appropriate deletions permitted to make the conclusion about the functional and genetic non-identity of the replication control and incompatibility control in RP4 plasmid. Different degrees of incompatibility manifested by different plasmids suggest a possible polygenic control of the incompatibility.     

Molecular cloning and mapping of SphI restriction fragments of plasmid RP4

A combined physical and functional map of plasmid RP4 is presented including the sites for 18 restriction endonucleases. Several cleavage sites of SphI, BalI, and ApaI are suitable for the dissection of the transfer gene regions. Recombinant plasmids containing RP4 SphI fragments were constructed to assist in localizing sites relative to each other and to assign functions conferred by RP4 to the host.     

Selection, analysis and mapping of mutations in the gene for resistance to kanamycin in plasmid RP4

We have tested possibilities of Escherichia coli strains dependent on drugs streptomycin and paromomycin for selection of spontaneous mutations in the RP4 kan gene specifying resistance to aminoglycosids--kanamycin, neomycin and paromycin. A set of kan gene mutations were obtained, classified ad mapped.     

Physical and genetic analysis of deletion mutants of plasmid R91-5 and the cloning of transfer genes in Pseudomonas aeruginosa.

We isolated deletion mutants of Pseudomonas aeruginosa plasmid R91-5 by both in vitro and in vivo means. Many of the deletion mutants selected on the basis of resistance to donor-specific phages fell into a few groups of apparently identical mutants, although the mutants were nonsibs. By analyzing plasmids with large deletions, we found that the essential replication genes of R91-5 were within a 3.85-kilobase region between coordinates 45.5 and 48.9. The origin of plasmid transfer (oriT) was mapped to a 4.5-kilobase region between coordinates 1.7 and 6.2. We indirectly determined the direction of plasmid transfer from oriT. By combining the data from our analysis of the deletions with data from complementation tests between cloned R91-5 fragments and known reference mutants, we ordered and mapped the 10 known transfer (tra) cistrons of R91-5. All of the tra cistrons mapped within the Tra2 region, and their order was as follows: traX, -Y, -T, -Q, -(V, R), -U, -(S, Z), -W (the cistrons in parentheses could not be ordered with respect to each other).     

Isolation and preliminary characterization of R6K plasmid deletion mutants.

Several deletion mutants of R6K have been isolated by mutagen treatment of bacterial host carrying wild type of the plasmid and search for clones that lost ampicillin or streptomycin resistance. The molecular weight of the mutants as estimated by agarose gel electrophoresis was 15 times 10(6) minus 23 times 10(6) compared to 26 times 10(6) for the parental plasmid. The mutants were characterized in respect of the level of resistance to ampicillin and frequency of conjugational transfer. Some of the mutants were found to differ in Eco RI digestion pattern from the wild type.     

Isolation and characterization of mutants of the RP4 plasmid coding for increased resistance to ampicillin

E. coli strain J53(RP4) was mutagenized with ethyl methanesulfonate and N-methyl-N'-nitro-N-nitrosoguanidine. Clones showing a two-to threefold increase in resistance to ampicillin were produced. This increase was not due to an increased number of RP4 copies per chromosome. The level of penicillinase activity was twice higher in comparison with the parental strain. No detectable changes were found in the region coding for the resistance to ampicillin on the plasmid by restriction analysis.     

Isolation and genetic analysis of deletion mutants of colicin E1 plasmids carrying a TnA insertion.

Deletions of colicin E1 (colE1) plasmid deoxyribonucleic acid (DNA) carrying the TnA transposon have been isolated. All except two were generated by nuclease digestion of plasmid DNA from its EcoRI-sensitive site. A plasmid containing about 16% of the ColE1 DNA (6.5 X 10(5) daltons) was generated that also contained the part of the TnA transposon conferring ampicillin resistance. The extents of different deletions were determined by analysis of restriction endonuclease fragments generated by the restriction endonucleases HaeII, BamHI, and HincII.     

SOS-induction of the RP4 plasmid tet-determinant

Induction of the tetracycline-resistance genes function by the inducer of the DNA-repair and mutability SOS-system, UV-light, has been tested. Activity of the tet-genes residing on the plasmid RP4 in Escherichia coli cells has been shown to be inducible by the low doses of tetracycline as well as by the mutagenic doses of UV-light. The induction was quantitatively registered by measuring the activity of beta-galactosidase of bacteriophage Mud1 (Ap, Lac) inserted into the tet-genes of the plasmid RP4. The bacteriophage integration inactivates the tet-genes function of the constructed plasmid fusing the lac-operon to a promoter of inactivated genes. Precise excision of bacteriophage restores the activity of the tet-genes proving together with the plasmid DNA-restriction analysis the fusion of tet-promoter with Iac-operon. The tet-genes of RP4 are concluded to be a part of the SOS-regulon, a set of genes inducible by the conditions harming the bacterial cell. Preliminary data on the mutagenic activity of tetracycline obtained in the bacterial test-system of mutagens are discussed.