Ubiquitin binding interface mapping on yeast ubiquitin hydrolase by NMR chemical shift perturbation.

The interaction between the 26 kDa yeast ubiquitin hydrolase (YUH1), involved in maintaining the monomeric ubiquitin pool in cells, and the 8.5 kDa yeast ubiquitin protein has been studied by heteronuclear multidimensional NMR spectroscopy. Chemical shift perturbation of backbone (1)H(N), (15)N, and (13)C(alpha) resonances of YUH1, in a YUH1-ubiquitin mixture and in a 35 kDa covalent complex with ubiquitin (a stable analogue of the tetrahedral reaction intermediate), was employed to identify the ubiquitin binding interface of YUH1. This interface mapped on the secondary structure of YUH1 suggests a wide area of contact for ubiquitin, encompassing the N-terminus, alpha1, alpha4, beta2, beta3, and beta6, coincident with the high specificity of YUH1 for ubiquitin. The presence of several hydrophobic clusters in the ubiquitin binding interface of YUH1 suggests that hydrophobic interactions are equally important as ionic interactions in contacting ubiquitin. The residues in the binding interface exhibit a high percentage of homology among the members of the ubiquitin C-terminal hydrolase family, indicating the well-conserved nature of the ubiquitin binding interface reported in this study. The secondary structure of YUH1, from our NMR studies, was similar to the recently determined structure of its human homologue ubiquitin C-terminal hydrolase L3 (UCH-L3), except for the absence of the helix H3 of UCH-L3. This region in YUH1 (helix H3 of UCH-L3) was least perturbed upon ubiquitin binding. Therefore, the binding interface was mapped onto the corresponding residues in the UCH-L3 crystal structure. A model for ubiquitin binding to YUH1 is proposed, in which a good correlation was observed for the lateral binding of ubiquitin to UCH-L3 (YUH1), stabilized by the electrostatic and hydrophobic interactions.     

Production of chemokines CTAPIII and NAP/2 by digestion of recombinant ubiquitin-CTAPIII with yeast ubiquitin C-terminal hydrolase and human immunodeficiency virus protease.

Recombinant yeast ubiquitin C-terminal hydrolase (YUH1), which has an N-terminal (His)(6) tag, and an autolysis-resistant mutant of the human immunodeficiency virus-1 protease (HIV-1 Pr) have been used as specific proteases to yield peptides from a ubiquitin conjugate. In the present example, connective tissue-activating peptide (CTAPIII) and neutrophil-activating peptide 2 (NAP/2) were generated by digestion of a ubiquitin-CTAPIII conjugate with YUH1 and HIV Pr, respectively, as indicated below: [see text] YUH1 cleaved at the peptide bond formed by the C-terminal Gly(76) of ubiquitin (Ub) and the N-terminal Asn(1) of the 85-residue peptide CTAPIII. The HIV-1 Pr cleaved between Tyr(15) and Ala(16), the N-terminal Ala of the 70-residue peptide NAP/2. Both enzymes produced authentic peptides from the Ub fusion protein, with a nearly 100% yield. The liberated CTAPIII and NAP/2 were separated from (His)(6)-Ub, the trace amounts of unreacted (His)(6)-Ub-CTAPIII, HIV-1 Pr, and the (His)(6)-YUH1 by passage over a nickel-chelate column; the final yield was about 10 mg of peptide/liter of cell culture. (His)(6)-YUH1, the HIV Pr mutant, and the (His)(6)-Ub-CTAPIII substrate were all expressed individually in Escherichia coli. (His)(6)-YUH1 and (His)(6)-Ub-CTAPIII were highly expressed in a soluble form, but about 75% of the total (His)(6)-YUH1 was also found in inclusion bodies. Both proteins from the soluble fractions were easily purified in a single step by immobilized metal ion affinity chromatography with a yield of about 27 mg of (His)(6)-Ub-CTAPIII and 13.6 mg of (His)(6)-YUH1 protein/liter of cell culture. Chemotactic factor activity, as assessed by the neutrophil shape change assay, was observed for NAP/2, but not for CTAPIII. This strategy, which employs YUH1 and the HIV-1 Pr as tools for the highly selective cleavage of the chimeric substrate, should be applicable to the large-scale production of a variety of peptides.     

Cloning and functional analysis of the ubiquitin-specific protease gene UBP1 of Saccharomyces cerevisiae

In eukaryotes, both natural and engineered fusions of ubiquitin to itself or other proteins are cleaved by processing proteases after the last (Gly76) residue of ubiquitin. Using the method of sib selection, and taking advantage of the fact that bacteria such as Escherichia coli lack ubiquitin-specific enzymes, we have cloned a gene, named UBP1, of the yeast Saccharomyces cerevisiae that encodes a ubiquitin-specific processing protease. With the exception of polyubiquitin, the UBP1 protease cleaves at the carboxyl terminus of the ubiquitin moiety in natural and engineered fusions irrespective of their size or the presence of an amino-terminal ubiquitin extension. These properties of UBP1 distinguish it from the previously cloned yeast protease YUH1, which deubiquitinates relatively short ubiquitin fusions but is virtually inactive with longer fusions such as ubiquitin-beta-galactosidase. The amino acid sequence of the 809-residue UBP1 lacks significant similarities to other known proteins, including the 236-residue YUH1 protease. Null ubp1 mutants are viable, and retain the ability to deubiquitinate ubiquitin-beta-galactosidase, indicating that the family of ubiquitin-specific proteases in yeast is not limited to UBP1 and YUH1.     

Expression and purification of ubiquitin-specific protease (UBP1) ofSaccharomyces cerevisiae in recombinantEscherichia coli

Truncated form of UBP1, an ubiquitin-specific protease ofSaccharomyces cerevisiae, was overexpressed inEscherichia coli. The hexahistidine residue (His₆) was fused to the N-terminus of truncated UBP1 and the corresponding recombinant protein was purified with high yield by immobilized metal affinity chromatography. The truncated form of UBP1 protein was functional to cleave ubiquitinated human growth hormone as substrate. Effects of pH and temperature were investigated in order to optimize deubiquitinating reactions for the truncated UBP1. Optimum temperature and pH for the cleavage reaction were 40°C and pH 8.0, respectively.     

Ubiquitin binding by a variant Jab1/MPN domain in the essential pre-mRNA splicing factor Prp8p

The U1, U2, U4/U6, and U5 small nuclear ribonucleoproteins (snRNPs) are components of the spliceosome, which catalyzes pre-mRNA splicing. One of the largest and the most highly conserved proteins in the spliceosome is Prp8p, a component of the U5 snRNP. Despite its size and conservation, very few motifs have been identified that suggest specific biochemical functions. A variant of the Jab1/MPN domain found in a class of deubiquitinating enzymes is present near the C terminus of Prp8p. Ubiquitination regulates a broad range of cellular pathways, and its functions generally require ubiquitin recognition by one or more ubiquitin-binding domains (UBDs). No precise role for ubiquitin has been defined in the pre-mRNA splicing pathway, and no known UBDs have been found within splicing proteins. Here we show that a Prp8p fragment containing the Jab1/MPN domain binds directly to ubiquitin with an affinity comparable to other known UBDs. Several mutations within this domain that compromise splicing also reduce interaction of the fragment with ubiquitin-Sepharose. Our results define a new UBD and suggest functional links between ubiquitin and the pre-mRNA splicing machinery.     

Expression in Escherichia coli and simple purification of human Fhit protein

The fragile histidine triad (Fhit) protein is a homodimeric protein with diadenosine 5',5"'-P(1),P(3)-triphosphate (Ap(3)A) asymmetrical hydrolase activity. We have cloned the human cDNA Fhit in the pPROEX-1 vector and expressed with high yield in Escherichia coli with the sequence Met-Gly-His(6)-Asp-Tyr-Asp-Ile-Pro-Thr-Thr followed by a rTEV protease cleavage site, denoted as "H6TV," fused to the N-terminus of Fhit. Expression of H6TV-Fhit in BL21(DE3) cells for 3 h at 37 degrees C produced 30 mg of H6TV-Fhit from 1 L of cell culture ( approximately 4 g of cells). The H6TV-Fhit protein was purified to homogeneity in a single step, with a yield of 80%, using nickel-nitrilotriacetate resin and imidazole buffer as eluting agent. Incubation of H6TV-Fhit with rTEV protease at 4 degrees C for 24 h resulted in complete cleavage of the H6TV peptide. There were no unspecific cleavage products. The purified Fhit protein could be stored for 3 weeks at 4 degrees C without loss of activity. The pure protein was stable at -20 degrees C for at least 18 months when stored in buffer containing 25% glycerol. Purified Fhit was highly active, with a K(m) value for Ap(3)A of 0.9 microM and a k(cat)(monomer) value of 7.2 +/- 1.6 s(-1) (n = 5). The catalytic properties of unconjugated Fhit protein and the H6TV-Fhit fusion protein were essentially identical. This indicates that the 24-amino-acid peptide containing the six histidines fused to the N-terminus of Fhit does not interfere in forming the active homodimers or in the binding of Ap(3)A.     

Mutant ubiquitin (UBB+1) associated with neurodegenerative disorders is hydrolyzed by ubiquitin C-terminal hydrolase L3 (UCH-L3)

Mutant ubiquitin (UBB⁺¹) accumulates in the hallmarks of tauopathies and polyglutamine diseases. We show that the deubiquitinating enzyme YUH1 of Saccharomyces cerevisiae and its mouse and human ortholog UCH-L3 are able to hydrolyze the C-terminal extension of UBB⁺¹. This yields another dysfunctional ubiquitin molecule (UB^G76Y) with biochemical properties similar to full length UBB⁺¹. UBB⁺¹ may be detected in post-mortem tissue due to impaired C-terminal truncation of UBB⁺¹. Although the level of UCH-L3 protein in several neurodegenerative diseases is unchanged, we show that in vitro oxidation of recombinant UCH-L3 impairs its deubiquitinating activity. We postulate that impaired UCH-L3 function may contribute to the accumulation of full length UBB⁺¹ in various pathologies.     

Recombinant Production, Isotope Labeling and Purification of ENOD40B: A Plant Peptide Hormone

The plant peptide hormone ENOD40B was produced in a protein production strain of Escherichia coli harboring an induction controller plasmid (Rosetta(DE3)pLysS) as a His6-tagged ubiquitin fusion protein. The fusion protein product was denatured and refolded as part of the isolation procedure and purified by immobilized metal ion chromatography. The peptide hormone was released from its fusion partner by adding yeast ubiquitin hydrolase (YUH) and subsequently purified by reversed phase chromatography. The purity of the resulting peptide fragment was assayed by MALDITOF mass spectrometry and NMR spectroscopy. The final yields of the target peptide were 7.0 mg per liter of LB medium and 3.4 mg per liter of minimal medium.     

An NMR analysis of ubiquitin recognition by yeast ubiquitin hydrolase: evidence for novel substrate recognition by a cysteine protease.

Yeast ubiquitin hydrolase 1 (YUH1), a cysteine protease that catalyzes the removal of ubiquitin C-terminal adducts, is important for the generation of monomeric ubiquitin. Heteronuclear NMR spectroscopy has been utilized to map the YUH1 binding surface on ubiquitin. When YUH1 was titrated into a sample of ubiquitin, approximately 50% of the (1)H-(15)N correlation peaks of ubiquitin were affected to some degree, as a result of binding to YUH1. It is noteworthy that the amide resonances of the basic residues (Arg42, Lys48, Arg72, and Lys74) were highly perturbed. These positively charged basic residues may be involved in direct interactions with the negatively charged acidic residues on YUH1. In addition to the electrostatic surface, the hydrophobic surfaces on ubiquitin (Leu8, Ile44, Phe45, Val70, Leu71, and Leu73) and YUH1 are also likely to contribute to the binding interaction. Furthermore, the amide resonances of Ile13, Leu43, Leu50, and Leu69, the side chains of which are not on the surface, were also highly perturbed, indicating substrate-induced changes in the environments of these residues as well. These large changes, observed from residues located throughout the five-stranded beta-sheet surface and the C-terminus, suggest that substrate recognition by YUH1 involves a wider area on ubiquitin.     

Recombinant expression, isotope labeling, refolding, and purification of an antimicrobial peptide, piscidin

An antimicrobial peptide, piscidin, was overexpressed as a fused form with the ubiquitin molecule in Escherichia coli, and the fusion protein was purified using immobilized metal affinity chromatography (IMAC). The peptide was released from its fusion partner by using yeast ubiquitin hydrolase (YUH), and subsequently purified by reverse phase chromatography. The expression and purification process of piscidin encountered several problems such as the lysis of the bacterial cell upon induction of the peptide production, the unwanted cleavage of the fusion protein inside the bacterial cell, and high tendency to aggregate in the aqueous environment. Such problems were alleviated by employing ubiquitin as a fusion partner for piscidin, growing the cells at a lower temperature, and changing the order of the purification steps. The yields of the fusion protein and the peptide were around 15 and 1.5 mg per liter of LB or minimal medium, respectively. The recombinant expression and purification of piscidin will enable its structural and dynamic studies using multidimensional NMR spectroscopy.     

High-level expression of recombinant phospholipase C from Bacillus cereus in Pichia pastoris and its characterization

The phospholipase c (plc) gene from Bacillus cereus was cloned into the pPICZC vector and integrated into the genome of Pichia pastoris. The phospholipase C (PLC) when expressed in P. pastoris was fused to the alpha-factor secretion signal peptide of Saccharomyces cerevisiae and secreted into a culture medium. Recombinant P. pastoris X-33 had a clear PLC band at 28.5 kDa and produced an extracellular PLC with an activity of 678 U mg(-1) protein which was more than a recombinant P. pastoris GS115 (552 U mg(-1) protein) or KM71H (539 U mg(-1) protein). The PLCs were purified using a HiTrap affinity column with a specific activity of 1335 U mg(-1) protein by P. pastoris GS115, 1176 U mg(-1) protein by P. pastoris KM71H and 1522 U mg(-1) protein by P. pastoris X-33. The three recombinant PLCs had high PLC activity in the low pH range of 4-5 and higher thermal stability (e.g. stable at 75 degrees C) than the wild-type PLC from B. cereus . Some organic solvents, surfactants and metal ions, e.g. methanol, acetone, Co(2+) and Mn(2+) etc., also influenced the activity of the recombinant PLCs.     

Expression and purification of a recombinant scFv towards the exotoxin of the pathogen, Burkholderia pseudomallei

A single chain variable fragment (scFv) specific towards B. pseudomallei exotoxin had previously been generated from an existing hybridoma cell line (6E6AF83B) and cloned into the phage display vector pComb3H. In this study, the scFv was subcloned into the pComb3X vector to facilitate the detection and purification of expressed antibodies. Detection was facilitated by the presence of a hemagglutinin (HA) tag, and purification was facilitated by the presence of a histidine tag. The culture was grown at 30 degrees C until log phase was achieved and then induced with 1 mM IPTG in the absence of any additional carbon source. Induction was continued at 30 degrees C for five h. The scFv was discerned by dual processes-direct enzyme-linked immunosorbent assays (ELISA), and Western blotting. When compared to E. coli strains ER2537 and HB2151, scFv expression was observed to be highest in the E. coli strain Top10F'. The expressed scFv protein was purified via nickel-mediated affinity chromatography and results indicated that two proteins a 52 kDa protein, and a 30 kDa protein were co-purified. These antibodies, when blotted against immobilized exotoxin, exhibited significant specificity towards the exotoxin, compared to other B. pseudomallei antigens. Thus, these antibodies should serve as suitable reagents for future affinity purification of the exotoxin.     

Expression of secreted His-tagged S-adenosylmethionine synthetase in the methylotrophic yeast Pichia pastoris and its characterization, one-step purification, and immobilization

S-Adenosylmethionine synthetase (SAM synthetase) catalyzes the synthesis of S-adenosylmethionine (SAM), which plays an important role in cellular functions such as methylation, sulfuration, and polyamine synthesis. To develop a simple and effective way to enzymatically synthesize and produce SAM, a soluble form of SAM synthetase encoded by SAM2 from Saccharomyces cerevisiae was successfully produced at high level ( approximately 200 mg/L) by the recombinant methylotrophic yeast Pichia pastoris. The secreted His6-tagged SAM synthetase was purified in a single chromatography step with a yield of approximately 82% for the total activity. The specific activity of the purified synthetase was 23.84 U/mg. The recombinant SAM synthetase could be a kind of allosteric enzyme with negative regulation. The enzyme functioned optimally at a temperature of 35 degrees C and pH 8.5. The stability of the recombinant synthetase and the effectiveness of different factors in preventing the enzyme from inactivation were also studied. Additional experiments were performed in which the recombinant SAM synthetase was purified and immobilized in one step using immobilized metal-chelate affinity chromatography. The immobilized synthetase was found to be 40.4% of the free enzyme activity in catalyzing the synthesis of SAM from dl-Met and ATP.     

Zinc and an N-terminal extra stretch of the ferredoxin from a thermoacidophilic archaeon stabilize the molecule at high temperature.

Ferredoxin from the thermoacidophilic archaeon Sulfolobus sp. strain 7 has a 36-residue extra domain at its N-terminus and a 67-residue core domain carrying two iron-sulfur clusters. A zinc ion is held at the interface of the two domains through tetrahedral coordination of three histidine residues (-6, -19 and -34) and one aspartic acid residue (-76) [Fujii, T., Hata, Y., Oozeki, M., Moriyama, H., Wakagi, T., Tanaka, N. & Oshima, T. (1997) Biochemistry 36, 1505-1513]. To elucidate the roles of the novel zinc ion and the extra N-terminal domain, a series of truncated mutants was constructed: G1, V12, S17, G23, L31 and V38, which lack residues 0, 11, 16, 22, 30 and 37 starting from the N-terminus, respectively. A mutant with two histidine residues each replaced by an alanine residue, H16A/H19A, was also constructed. All the mutant ferredoxins had two iron-sulfur clusters, while zinc was retained only in G1 and V12. The thermal stability of the proteins was investigated by monitoring A408; the melting temperature (Tm) was approximately 109 degrees C for the natural ferredoxin, approximately 109 degrees C for G1, 97.6 degrees C for V12, 89.0 degrees C for S17, 89.2 degrees C for G23, 89.3 degrees C for L31, 82.1 degrees C for V38, and 89.4 degrees C for H16A/H19A. Km and Vmax values of 2-oxoglutarate:ferredoxin oxidoreductase for natural ferredoxin, G1, S17 and L31 were similar, suggesting that electron-accepting activities were not affected by the deletion. The combination of CD and fluorescent spectroscopic analyses with truncated mutant S17 indicated that not only the clusters but also the secondary and tertiary structures were simultaneously degraded at a Tm around 89 degrees C. These results unequivocally demonstrate that the zinc ion and certain parts, but not all, of the extra sequence stretch in the N-terminal domain are responsible not for function but for thermal stabilization of the molecule.     

Microencapsulation of recombinant Saccharomyces cerevisiae cells with invertase activity in liquid-core alginate capsules

As a means of integrating cell growth and immobilization, recombinant Saccharomyces cerevisiae cells with invertase activity were immobilized in liquid-core alginate capsules and cultured to a high density. S. cerevisiae cells of SEY 2102 (MAT alpha ura3-52 leu2-3, 112 his4-519) harboring plasmid pRB58 with the SUC2 gene coding for invertase were grown to 83 g/L of liquid-core volume inside the capsule on a dry weight basis. The cloned invertase was expressed well in the immobilized cells with slightly higher activity than the free cells in a batch culture. Invertase in the immobilized cells showed slightly more improved thermal stability than in the free cells. Storage in a Na-acetate buffer at 4 degrees C and 10 degrees C for 1 month resulted in 7% and 8% loss in activity, respectively. The sucrose hydrolysis reaction was stably maintained for 25 repeated batches for 7 days at 30 degrees C. Continuous hydrolysis of 0.3 M sucrose was carried out in a packed bed reactor with a conversion of more than 90% at a maximum productivity of 55.5 g glucose/L per hour for 7 days. In a continuous stirred tank reactor, the maximum productivity of 80.8 g glucose/L per hour was achieved at a conversion of 59.1% using 1.0 M sucrose solution, and 0.5 M sucrose solution was hydrolyzed for 1 week with a 95% conversion at a productivity of 48.8 g/L per hour. (c) 1996 John Wiley & Sons, Inc.     

Expression and characterization of a thermostable β-xylosidase from the hyperthermophile, Thermotoga maritima

A thermostable beta-xylosidase from a hyperthermophilic bacterium, Thermotoga maritima, was over-expressed in Escherichia coli using the T7 polymerase expression system. The expressed beta-xylosidase was purified in two steps, heat treatment and immobilized metal affinity chromatography, and gave a single band on SDS-PAGE. The maximum activity on p-nitrophenyl beta-D-xylopyranoside was at 90 degrees C and pH 6.1. The purified enzyme had a half-life of over 22-min at 95 degrees C, and retained over 57% of its activity after holding a pH ranging from 5.4 to 8.5 for 1 h at 80 degrees C. Among all tested substrates, the purified enzyme had specific activities of 275, 50 and 29 U mg(-1) on pNPX, pNPAF, and pNPG, respectively. The apparent Michaelis constant of the beta-xylosidase was 0.13 mM for p NPX with a V (max) of 280 U mg(-1). When the purified beta-xylosidase was added to xylanase, corncob xylan was hydrolized completely to xylose.     

Ubiquitin-specific proteases of Saccharomyces cerevisiae. Cloning of UBP2 and UBP3, and functional analysis of the UBP gene family.

In eukaryotes, both natural and engineered ubiquitin (Ub) fusions to itself or other proteins are cleaved by processing proteases after the last (Gly76) residue of ubiquitin. YUH1 and UBP1, the genes for two ubiquitin-specific proteases of the yeast Saccharomyces cerevisiae, have been cloned previously and shown to encode nonhomologous proteins. Using an Escherichia coli-based genetic screen, we have isolated two other yeast genes for ubiquitin-specific proteases, named UBP2 and UBP3. Ubp2 (1,264 residues), Ubp3 (912 residues), and the previously cloned Ubp1 (809 residues) are largely dissimilar except for two short regions containing Cys and His which encompass their putative active sites. Neither of these proteases has sequence similarities to Yuh1. Both Ubp2 and the previously identified Ubp1 cleave in vitro at the C terminus of the ubiquitin moiety in natural and engineered fusions irrespective of their size, poly-Ub being the exception. However, both Ubp1 and Ubp2 are also capable of cleaving poly-Ub when coexpressed with it in E. coli, suggesting that such cleavage is largely cotranslational. Although inactive in E. coli extracts, Ubp3 was active with all of the tested ubiquitin fusions except poly-Ub when coexpressed with them in E. coli. Null yuh1 ubp1 ubp2 ubp3 quadruple mutants are viable and retain the ability to deubiquitinate ubiquitin fusions, indicating the presence of at least one more ubiquitin-specific processing protease in S. cerevisiae.     

Preparation of a new thermo-responsive adsorbent with maltose as a ligand and its application to affinity precipitation

A thermo-responsive polymer on which maltose was covalently immobilized as an affinity ligand was newly synthesized for purification of thermolabile proteins from the crude solution by affinity precipitation. Among the thermo-responsive polymers synthesized as carriers for adsorbent, poly(N-acryloylpiperidine)-cysteamine (pAP) has a lower critical solution temperature (LCST) of around 4 degrees C, at which its solubility exhibits a sharp change. Adsorbent for affinity precipitation was prepared by combining pAP with maltose using trimethylamine-borane as a reducing reagent. This adsorbent (pAPM) obtained showed a good solubility response: pAPM in the basal buffer (pH 7.0) became soluble below 4 degrees C and was completely insoluble above 8 degrees C. The affinity precipitation method using pAPM consisted of the following four steps: adsorption at 4 degrees C, precipitation of the complex at 10 degrees C, desorption by adding the desorption reagent at 4 degrees C, and recovery of a target protein at 10 degrees C. In the affinity precipitation of Con A from the crude extract of jack bean meal, 82% of Con A added was recovered with 80% purity by addition of 0.2 M methyl-alpha-D-mannopyranoside as a desorption reagent. In the repeated purification of Con A from the crude extract, pAPM could be satisfactorily reused without decrease in the affinity performance. Moreover, when pAPM was used for the purification of thermolabile alpha-glucosidase from the cell-free extract of Saccharomyces cerevisiae, 68% of total activity added was recovered and the specific activity per amount of protein of the purified solution was enhanced 206-fold higher than that of the cell-free extract without thermal deactivation of the enzyme.     

Preparation and characterization of kappa-carrageenan immobilized urease

Urease was encapsulated within kappa-carrageenan beads. Various parameters, such as amount of kappa-carrageenan and enzyme activity, were optimized for the immobilization of urease. Immobilized urease was thoroughly characterized for pH, temperature, and storage stabilities and these properties were compared with the free enzyme. The free urease activity quickly decreased and the half time of the activity decay was about 3 days at 4 degrees C. The immobilized urease remained very active over a long period of time and this enzyme lost about 70.43% of its orginal activity over the period of 26 days for storage at 4 degrees C. The Michaelis constant (Km) and maximum reaction velocity (Vmax) were calculated from Lineweaver-Burk plots for both free and immobilized enzyme systems. Vmax = 227.3 U/mg protein, Km = 65.6 mM for free urease and Vmax = 153.9 U/mg protein, Km = 96.42 mM for immobilized urease showed a moderate decrease of enzyme specific activity and change of substrate affinity.     

Immobilization of alpha(1)-acid glycoprotein for chromatographic studies of drug-protein binding

A new method for preparing immobilized alpha1-acid glycoprotein (AGP) for use in drug-protein binding studies was developed and optimized. In this approach, periodate was used under mild conditions to oxidize the carbohydrate chains in AGP for attachment to a hydrazide-activated support. The final conditions chosen for this oxidation involved the reaction of 5.0 mg/mL AGP at 4 degrees C and pH 7.0 with 5-20 mM periodic acid for 10 min. These conditions helped maximize the immobilization of AGP without significantly affecting its activity. This method was evaluated by using it to attach AGP to silica for use in high-performance affinity chromatography and self-competition zonal elution studies. In work with R- and S-propranolol, only one type of binding site was observed for both enantiomers on the immobilized AGP, in agreement with previous studies using soluble AGP. The association equilibrium constants measured for the immobilized AGP with R- and S-propranolol at pH 7.4 and 37 degrees C were 2.7 x 10(6) and 4.2 x 10(6) M(-1), respectively, with linear van't Hoff plots being obtained between 5 and 37 degrees C. Work performed with other drugs also gave good agreement between the behavior seen for immobilized AGP and that for soluble AGP. The same immobilization method described in this work could be used to attach AGP to other materials, such as those used for surface plasmon resonance or alternative biosensors.