Surface behaviour and peptide-lipid interactions of the antibiotic peptides, Maculatin and Citropin

Surface behaviour of Maculatin 1.1 and Citropin 1.1 antibiotic peptides have been studied using the Langmuir monolayer technique in order to understand the peptide-membrane interaction proposed as critical for cellular lysis. Both peptides have a spontaneous adsorption at the air-water interface, reaching surface potentials similar to those obtained by direct spreading. Collapse pressures (Π_c, stability to lateral compression), molecular areas at maximal packing and surface potentials (ΔV) obtained from compression isotherms of both pure peptide monolayers are characteristic of peptides adopting mainly α-helical structure at the interface. The stability of Maculatin monolayers depended on the subphase and increased when pH was raised. In an alkaline environment, Maculatin exhibits a molecular reorganization showing a reproducible discontinuity in the Π-A compression isotherm. Both peptides in lipid films with the zwitterionic palmitoyl-oleoyl-phosphatidylcholine (POPC) showed an immiscible behaviour at all lipid-peptide proportions studied. By contrast, in films with the anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG), the peptides showed miscible behaviour when the peptides represented less than 50% of total surface area. Additional penetration experiments also demonstrated that both peptides better interact with POPG compared with POPC monolayers. This lipid preference is discussed as a possible explanation of their antibiotic properties.     

Lipid-like behavior of signal sequence peptides at air–water interface

Several protein transport processes in the cell are mediated by signal sequence peptides located at the N-terminal side of the mature protein sequence. To date, the specific interaction and the stability of these peptides at the amphipathic interface of biological membranes and the relevance of the peptide conformation when they interact with lipids is not clear. We report the surface properties and the peptide–lipid interaction of three signal sequence peptides at the air–NaCl 145 mM interface by using the Langmuir monolayer approach. These synthetic peptides have a natural sequence with a non-periodic amphiphilicity, where hydrophobic and hydrophilic residues are located on opposed sides of the peptide primary sequence. We show that signal sequence peptides form insoluble monolayers of high stability against lateral compression. At close packing, peptide molecular area, surface potential and the high stability of the peptide monolayer are indicative that signal sequence peptides are compatible with a β-sheet conformation at the interface. Structure was confirmed with PM-IRRAS and transmission FT-IR studies. The peptides show lateral miscibility with either POPC (a liquid-expanded lipid) or DPPC (a liquid-condensed lipid) in mixed peptide–lipid monolayers. This indicates that signal sequence peptides studied are laterally miscible with phospholipids independent of the phase state of the lipid.     

Penetration of the signal sequence of Escherichia coli PhoE protein into phospholipid model membranes leads to lipid-specific changes in signal peptide structure and alterations of lipid organization

In order to obtain more insight in the initial steps of the process of protein translocation across membranes, biophysical investigations were undertaken on the lipid specificity and structural consequences of penetration of the PhoE signal peptide into lipid model membranes and on the conformation of the signal peptide adopted upon interaction with the lipids. When the monolayer technique and differential scanning calorimetry are used, a stronger penetration is observed for negatively charged lipids, significantly influenced by the physical state of the lipid but not by temperature or acyl chain unsaturation as such. Although the interaction is principally electrostatic, as indicated also by the strong penetration of N-terminal fragments into negatively charged lipid monolayers, the effect of ionic strength suggests an additional hydrophobic component. Most interestingly with regard to the mechanism of protein translocation, the molecular area of the peptide in the monolayer also shows lipid specificity: the area in the presence of PC is consistent with a looped helical orientation, whereas in the presence of cardiolipin a time-dependent conformational change is observed, most likely leading from a looped to a stretched orientation with the N-terminus directed toward the water. This is in line also with the determined peptide-lipid stoichiometry. Preliminary 31P NMR and electron microscopy data on the interaction with lipid bilayer systems indicate loss of bilayer structure.     

Biophysical properties of a synthetic transit peptide from wheat chloroplast ribulose 1,5-bisphosphate carboxylase.

The surface properties of pure RuBisCo transit peptide (RTP) and its interaction with zwitterionic, anionic phospholipids and chloroplast lipids were studied by using the Langmuir monolayer technique. Pure RTP is able to form insoluble films and the observed surface parameters are compatible with an alpha-helix perpendicular to the interface. The alpha-helix structure tendency was also observed by using transmission FT-IR spectroscopy in bulk system of a membrane mimicking environment (SDS). On the other hand, RTP adopts an unordered structure in either aqueous free interface or in the presence of vesicles composed of a zwitterionic phospholipid (POPC). Monolayer studies show that in peptide/lipid mixed monolayers, RTP shows no interaction with zwitterionic phospholipids, regardless of their physical state. Also, with the anionic POPG at high peptide ratios RTP retains its individual surface properties and behaves as an immiscible component of the peptide/lipid mixed interface. This behaviour was also observed when the mixed films were composed by RTP and the typical chloroplast lipids MGDG or DGDG (mono- and di-galactosyldiacylglycerol). Conversely, RTP establishes a particular interaction with phosphatidylglycerol and cardiolipin at low peptide to lipid area covered relation. This interaction takes place with an increase in surface stability and a reduction in peptide molecular area (intermolecular interaction). Data suggest a dynamic membrane modulation by which the peptide fine-tunes its membrane orientation and its lateral stability, depending on the quality (lipid composition) of the interface.     

Secondary structure in lung surfactant SP-B peptides: IR and CD studies of bulk and monolayer phases

Pulmonary surfactant protein SP-B is known to facilitate adsorption and spreading of surfactant components across the air/water interface. This property appears essential for in vivo function in the alveolar subphase and at the air/alveolar surface. Three peptides with amino acid sequences based on SP-B containing predicted alpha-helical regions (SP-B(1--20), SP-B(9--36A), SP-B(40--60A)) have been synthesized to probe structure-function relationships and protein-lipid interaction in bulk phase and monolayer environments. IR and CD studies are reported along with traditional surface pressure-molecular area (pi-A) isotherms and IR reflection-absorption spectroscopy (IRRAS) investigations conducted at the air/water interface. In bulk phase, helix-promoting environments (methanol and aqueous dispersions of lipid vesicles), SP-B(1--20) and SP-B(9--36A) contained significant amounts of alpha-helical structure, whereas varying degrees of alpha-helix, random coil, and beta-sheet were observed in aqueous solutions and monolayers. The most striking behavior was observed for SP-B(9--36A), which displayed reversible surface pressure-induced beta-sheet formation. Bulk phase lipid melting curves and monolayer experiments with peptide-lipid mixtures showed subtle differences in the degree of bulk phase interaction and substantial differences in peptide surface activity. The uniqueness of IRRAS is emphasized as the importance of evaluating secondary structure in both bulk phase and monolayer environments for lung surfactant peptide mimics is demonstrated.     

Surface behaviour and peptide-lipid interactions of the antibiotic peptides, Maculatin and Citropin

Surface behaviour of Maculatin 1.1 and Citropin 1.1 antibiotic peptides have been studied using the Langmuir monolayer technique in order to understand the peptide-membrane interaction proposed as critical for cellular lysis. Both peptides have a spontaneous adsorption at the air-water interface, reaching surface potentials similar to those obtained by direct spreading. Collapse pressures (Pi(c), stability to lateral compression), molecular areas at maximal packing and surface potentials (DeltaV) obtained from compression isotherms of both pure peptide monolayers are characteristic of peptides adopting mainly alpha-helical structure at the interface. The stability of Maculatin monolayers depended on the subphase and increased when pH was raised. In an alkaline environment, Maculatin exhibits a molecular reorganization showing a reproducible discontinuity in the Pi-A compression isotherm. Both peptides in lipid films with the zwitterionic palmitoyl-oleoyl-phosphatidylcholine (POPC) showed an immiscible behaviour at all lipid-peptide proportions studied. By contrast, in films with the anionic palmitoyl-oleoyl-phosphatidylglycerol (POPG), the peptides showed miscible behaviour when the peptides represented less than 50% of total surface area. Additional penetration experiments also demonstrated that both peptides better interact with POPG compared with POPC monolayers. This lipid preference is discussed as a possible explanation of their antibiotic properties.     

Investigations of antimicrobial peptides in planar film systems

Planar systems - monolayers and films - constitute a useful platform for studying membrane-active peptides. Here, we summarize varied approaches for studying peptide organization and peptide-lipid interactions at the air/water interface, and focus on three representative antimicrobial membrane-associated peptides—alamethicin, gramicidin, and valinomycin. Experimental data, specifically surface pressure/area isotherms and Brewster angle microscopy images, provided information on peptide association and the effects of the lipid monolayers on peptide surface organization. In general, film analysis emphasized the effects of lipid layers in promoting peptide association and aggregation at the air/water interface. Importantly, the data demonstrated that in many cases peptide domains are phase-separated within the phospholipid monolayers, suggesting that this behavior contributes to the biological actions of membrane-active antimicrobial peptides.     

Structural investigation on the adsorption of the MARCKS peptide on anionic lipid monolayers - effects beyond electrostatic

The presence of charged lipids in the cell membrane constitutes the background for the interaction with numerous membrane proteins. As a result, the valence of the lipids plays an important role concerning their lateral organization in the membrane and therefore the very manner of this interaction. This present study examines this aspect, particularly regarding to the interaction of the anionic lipid DPPS with the highly basic charged effector domain of the MARCKS protein, examined in monolayer model systems. Film balance, fluorescence microscopy and X-ray reflection/diffraction measurements were used to study the behavior of DPPS in a mixture with DPPC for its dependance on the presence of MARCKS (151-175). In the mixed monolayer, both lipids are completely miscible therefore DPPS is incorporated in the ordered crystalline DPPC domains as well. The interaction of MARCKS peptide with the mixed monolayer leads to the formation of lipid/peptide clusters causing an elongation of the serine group of the DPPS up to 7? in direction to surface normal into the subphase. The large cationic charge of the peptide pulls out the serine group of the interface which simultaneously causes an elongation of the phosphodiester group of the lipid fraction too. The obtained results were used to compare the interaction of MARCKS peptide with the polyvalent PIP(2) in mixed monolayers. On this way we surprisingly find out, that the relative small charge difference of the anionic lipids causes a significant different interaction with MARCKS (151-175). The lateral arrangement of the anionic lipids depends on their charge values and determines the diffusion of the electrostatic binding clusters within the membrane.     

Lipid discrimination in phospholipid monolayers by the antimicrobial frog skin peptide PGLa. A synchrotron X-ray grazing incidence and reflectivity study

We present a first study using synchrotron grazing incidence diffraction and X-ray reflectivity measurements on mixed phospholipid/peptide monolayers at the air/water interface. The thermodynamic properties of the pure and mixed monolayers were characterized using the classical film balance technique. Surface pressure/potential-area isotherms showed that the antimicrobial frog skin peptide PGLa formed a very stable monolayer with two PGLa molecules per kinetic unit and a collapse pressure of ~22 mN/m. X-ray grazing incidence diffraction indicated that the peptide-dimer formation did not lead to self-aggregation with subsequent crystallite formation. However, the scattering length density profiles derived from X-ray reflectivity measurements yield information on the PGLa monolayer that protrudes into the air phase by about 0.8 nm, suggesting that the peptide is aligned parallel to the air/water interface. The monolayers, composed of disaturated phosphatidylcholines or phosphatidylglycerols, were stable up to 60 mN/m and exhibited a first-order transition from a liquid-expanded to a liquid-condensed state around 10 mN/m. Structural details of the phospholipid monolayers in the presence and absence of PGLa were obtained from synchrotron experiments. Thereby, the X-ray data of distearoylphosphatidylcholine/PGLa can be analyzed by being composed of the individual components, while the peptide strongly perturbed the lipid acyl chain order of distearoylphosphatidylglycerol. These results are in agreement that PGLa mixes at a molecular level with negatively charged lipids, but forms separate islands in zwitterionic phosphatidylcholine monolayers and demonstrates that antimicrobial peptides can discriminate between the major phospholipid components of bacterial and mammalian cytoplasmic membranes.     

Molecular characteristics of astaxanthin and beta-carotene in the phospholipid monolayer and their distributions in the phospholipid bilayer.

The molecular characteristics of the monolayers of astaxanthin with polar group on the beta-ionone ring in the molecule and beta-carotene without polar group and their interactions in mixed carotenoid-phospholipid monolayers and the effects of carotenoids on the phase behavior of the phospholipid bilayers were examined by the monolayer technique and differential scanning calorimetry (DSC). We found from the monolayer study that beta-carotene had an amphiphilic nature. The molecular assembly of astaxanthin in the monolayer at the hydrophobic/hydrophilic interface was more stable than that of beta-carotene. Dimyristoylphosphatidylcholine (DMPC) in the monolayer was miscible with astaxanthin in the range of 0-0.4 mol fractions of astaxanthin, but not fully miscible with beta-carotene even at low concentrations below 0.1 mol fraction of beta-carotene. Surface potential and compression/expansion cycles of beta-carotene monolayer indicated the formation of molecular aggregates by itself. DSC study showed that when small amount of astaxanthin was added, the transition temperature of dipalmitoylphosphatidylcholine (DPPC) was markedly shifted to lower temperatures and that the transition peak was asymmetrically broadened, indicative of a significant depression in cooperativity of the gel to liquid-crystalline transition. The asymmetric DSC endothermic bands of DPPC incorporating small amounts of astaxanthin were well fit by deconvolution into two to three domains containing different concentrations of astaxanthin. On the contrary, the incorporation of beta-carotene resulted in a small depression of the main transition temperature with a slight broadening of the transition peak, suggesting a small miscibility of beta-carotene with the phospholipid bilayer or a formation of aggregates of beta-carotene in the membranes. These results suggest that there would be a high localized concentration in the phase separated membrane for astaxanthin or beta-carotene to function effectively as scavenger.     

Interaction of long-chain nicotinates with dipalmitoylphosphatidylcholine

The interaction of four long-chain nicotinates, compounds that are of interest as potential chemopreventive agents, with dipalmitoylphosphatidylcholine (DPPC) was investigated in monolayers at the air-water interface and in fully hydrated bilayers. For the monolayer studies, the compression isotherms of mixtures of the respective nicotinate with DPPC were recorded at various compositions on a hydrochloric acid subphase (pH 1.9-2.1, 37 +/- 2 degrees C). The headgroup of the nicotinates (24-29 A2/molecule) is larger than that of the hydrophobic tail (20 A2/molecule). The pure nicotinates exhibit a temperature- and chain length-dependent transition from an expanded to a condensed phase. Analysis of the concentration dependence of the average molecular area at constant film pressure and the concentration dependence of the breakpoint of the phase transition from the expanded to the condensed state suggests that all four DPPC-nicotinate mixtures are partially miscible at the air-water interface. Although a complex phase behavior with several phase transitions was observed, differential scanning calorimetry studies of the four mixtures are also indicative of the partial miscibility of DPPC and the respective nicotinate. Overall, the complex phase behavior most likely results from the head-tail mismatch of the nicotinates and the geometric packing constraints in the two-component lipid bilayer.     

Molecular packing of high-density and low-density lipoprotein surface lipids and apolipoprotein A-I binding

The surface pressure (pi)-molecular area (A) isotherms for monolayers of human high-density lipoprotein (HDL3) and low-density lipoprotein (LDL) phospholipids and of mixed monolayers of these phospholipids with cholesterol spread at the air-water interface were used to deduce the likely molecular packing at the surfaces of HDL3 and LDL particles. LDL phospholipids form more condensed monolayers than HDL3 phospholipids; for example, the molecular areas of LDL and HDL3 phospholipids at pi = 10 dyn/cm are 88 and 75 A2/molecule, respectively. The closer packing in the LDL phospholipids monolayer can be attributed to the higher contents of saturated phosphatidylcholines and sphingomyelin relative to HDL3. Cholesterol condenses both HDL3 and LDL phospholipid monolayers but has a greater condensing effect on the LDL phospholipid monolayer. The pi-A isotherms for mixed monolayer of HDL3 phospholipid/cholesterol and LDL phospholipid/cholesterol at stoichiometries similar to those at the surfaces of lipoprotein particles suggest that the monolayer at the surface of the LDL particle is significantly more condensed than that at the surface of the HDL3 particle. The closer lateral packing in LDL is due to at least three factors: (1) the difference in phospholipid composition; (2) the higher unesterified cholesterol content in LDL; and (3) a stronger interaction between cholesterol and LDL phospholipids relative to HDL3 phospholipids. The influence of lipid molecular packing on the affinity of human apolipoprotein A-I (apo A-I) for HDL3 and LDL surface lipids was evaluated by monitoring the adsorption of 14C-methylated apo A-I to monolayers of these lipids spread at various initial surface pressures (pi i).(ABSTRACT TRUNCATED AT 250 WORDS)     

Interaction of the third helix of Antennapedia homeodomain and a phospholipid monolayer, studied by ellipsometry and PM-IRRAS at the air-water interface

The penetratin peptide, a 16 amino acid sequence extracted from Antennapedia homeodomain, is able to translocate across a neural cell membrane through an unknown mechanism, most likely a non-specific interaction with membrane lipids. Beyond its potential application as vector targeting small hydrophilic molecules and enabling them to reach a cell nucleus, this observation raises intriguing questions concerning the physico-chemistry of peptide-lipid interactions. Here we present a study of the role of lipid surface pressure and head charge on the mechanism of interaction. This was performed using optical techniques: surface infrared spectroscopy and ellipsometry, applied to a monolayer of phospholipids deposited at the air-water interface. Determination of the structure and orientation of peptides and lipids (separately or together) evidenced that electrostatic rather than amphiphilic interactions determine the peptide adsorption and its action on lipids.     

Organization of the enantiomeric and racemic forms of an amphiphilic resorcinol derivative at the air-water and graphite-1-phenyloctane interfaces

This article describes a study of the outcome of racemate condensation in different types of monolayers. The study was performed on a resorcinol surfactant bearing an octadecyl chain and a lactate group which formed a monolayer at the interface of graphite and 1-phenyloctane as well as a Langmuir film at the air-water interface. Control experiments with the enantiopure materials provided the characteristics of the chiral organizations. The results obtained on the racemate show that on graphite the molecule forms chiral domains, indicating that spontaneous resolution takes place at the surface, a phenomenon that has been rationalized using molecular modeling. The X-ray crystal structure of the DMSO solvate of one of the enantiomers shows a similar type of packing to this monolayer. On the other hand, in the Langmuir layer it appears that the formation of a racemic compound is favoured, as it is in the solid state in three dimensions. The work shows how the symmetry restrictions in different environments can have a critical influence on the outcome of racemate organization, and underline the tendency of graphite to favour symmetry breaking in monolayers formed at its surface.     

Partitioning of anesthetics into a lipid bilayer and their interaction with membrane-bound peptide bundles

Molecular dynamics simulations have been performed to investigate the partitioning of the volatile anesthetic halothane from an aqueous phase into a coexisting hydrated bilayer, composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) lipids, with embedded alpha-helical peptide bundles based on the membrane-bound portions of the alpha- and delta-subunits, respectively, of nicotinic acetylcholine receptor. In the molecular dynamics simulations halothane molecules spontaneously partitioned into the DOPC bilayer and then preferentially occupied regions close to lipid headgroups. A single halothane molecule was observed to bind to tyrosine (Tyr-277) residue in the alpha-subunit, an experimentally identified specific binding site. The binding of halothane attenuated the local loop dynamics of alpha-subunit and significantly influenced global concerted motions suggesting anesthetic action in modulating protein function. Steered molecular dynamics calculations on a single halothane molecule partitioned into a DOPC lipid bilayer were performed to probe the free energy profile of halothane across the lipid-water interface and rationalize the observed spontaneous partitioning. Partitioned halothane molecules affect the hydrocarbon chains of the DOPC lipid, by lowering of the hydrocarbon tilt angles. The anesthetic molecules also caused a decrease in the number of peptide-lipid contacts. The observed local and global effects of anesthetic binding on protein motions demonstrated in this study may underlie the mechanism of action of anesthetics at a molecular level.     

Evidence for the presence of a specific ganglioside GM1/valinomycin complex in mixed monolayers

The effect of a negatively charged mono-sialoglyco-sphingolipid (GM1-ganglioside) on the molecular organization and on physiochemical properties of lipid/peptide (valinomycin) systems was investigated in monolayers at the air/water interface. At a high molar fraction of GM1, the surface pressure/area isotherms of the two-component films of the system GM1/valinomycin and the isotherm of the pure ganglioside monolayer are identical concerning the space requirement of the molecules and thereby the packing of the monolayer. Using space-filling molecular models, a simple calculation gives the theoretical amount of 4.5 ganglioside molecules associated with one molecule of the depsipeptide valinomycin. The average surface potential indicates, that valinomycin, interacting with the polar head group of GM1, becomes partly embedded within the lipid interface. For GM1/eicosanol and valinomycin/eicosanol mixtures, the agreement between theory and experimental data strongly supports the model of ideal mixing without any molecular interactions between the different components. The results suggest the formation of a ganglioside/valinomycin complex with simultaneous alteration of the surface potential and molecular structure of the single components.     

Interactions of mitochondrial precursor protein apocytochrome c with phosphatidylserine in model membranes. A monolayer study

(1) The interaction of apocytochrome c with different molecular species of phosphatidylserine was studied using monolayers at constant surface area or constant surface pressure. The protein inserted readily into dioleoylphosphatidylserine monolayers up to a limiting pressure of 50 mN/m, whereas the interaction decreased with increasing molecular packing of the phosphatidylserine species, indicating the importance of the hydrophobic core of the lipid layer for the interaction. (2) The high affinity of apocytochrome c for dioleoylphosphatidylserine is indicated by the low Kd of 0.017 microM. There is little or no interaction with phosphatidylcholines. The importance of charge interactions is underlined by its ionic strength and pH dependency. (3) Experiments using 14C-labelled apocytochrome c indicate that cholesterol can enhance the protein binding. (4) It was demonstrated that apocytochrome c monomers penetrate the monolayer whereas oligomers can be formed in an adsorbed layer and washed off without changing the surface pressure. Preincubation of apocytochrome c in 3 M guanidine, to obtain the monomeric form, was essential to measure the full effect of interfacial interaction. (5) The molecular area of apocytochrome c changed from 1200-1300 A2/molecule in the absence of lipid to 700-900 A2/molecule after penetration of dioleoylphosphatidylserine monolayers. (6) Apocytochrome c-dioleoylphosphatidylserine interactions are only possible when the monolayer is approached from the subphase. It is concluded that the charge interactions are required for binding and penetration of the protein.     

Influence of Ca2+ and temperature on the interaction of gangliosides with valinomycin in mixed monolayers at the air/water interface

The effects of Ca2+ and temperature on mixed ganglioside-valinomycin-monolayers at the air/water interface were studied. Surface pressure-area isotherms of the pure gangliosides (GM1, GD1a) exhibited the typical monolayer characteristics. Pressure-area isotherms of the cyclodepsipeptide, valinomycin, were determined. In mixed monolayers, positive and negative deviation from the mean molecular area indicated the two components were miscible. Especially in GD1a mixtures, the addition of 0.01 mM calcium exhibited, with low molar fractions of valinomycin, a demixing effect in the direction of the phase separation of the components.     

Penetratin-membrane association: W48/R52/W56 shield the peptide from the aqueous phase

Using molecular dynamics simulations, we studied the mode of association of the cell-penetrating peptide penetratin with both a neutral and a charged bilayer. The results show that the initial peptide-lipid association is a fast process driven by electrostatic interactions. The homogeneous distribution of positively charged residues along the axis of the helical peptide, and especially residues K46, R53, and K57, contribute to the association of the peptide with lipids. The bilayer enhances the stability of the penetratin helix. Oriented parallel to the lipid-water interface, the subsequent insertion of the peptide through the bilayer headgroups is significantly slower. The presence of negatively charged lipids considerably enhances peptide binding. Lateral side-chain motion creates an opening for the helix into the hydrophobic core of the membrane. The peptide aromatic residues form a pi-stacking cluster through W48/R52/W56 and F49/R53, protecting the peptide from the water phase. Interaction with the penetratin peptide has only limited effect on the overall membrane structure, as it affects mainly the conformation of the lipids which interact directly with the peptide. Charge matching locally increases the concentration of negatively charged lipids, lateral lipid diffusion locally decreases. Lipid disorder increases, through decreased order parameters of the lipids interacting with the penetratin side chains. Penetratin molecules at the membrane surface do not seem to aggregate.     

Spread mixed monolayers of deoxycholic and dehydrocholic acids at the air-water interface, effect of subphase pH. Characterization by axisymmetric drop shape analysis

Bile acids (deoxycholic and dehydrocholic acids) spread mixed monolayers behavior at the air/water interface were studied as a function of subphase pH using a constant surface pressure penetration Langmuir balance based on the Axisymmetric Drop Shape Analysis (ADSA). We examined the influence of electrostatic, hydrophobic and hydration forces on the interaction between amphiphilic molecules at the interface by the collapse area values, the thermodynamic parameters and equation of state virial coefficients analysis. The obtained results showed that at neutral (pH=6.7) or basic (pH=10) subphase conditions the collapse areas values are similar to that of cholanoic acid and consistent with the cross-sectional area of the steroid nucleus (approximately 40 A(2)). The Gibbs energy of mixing values (DeltaG(mix)<0) and the first virial coefficients of the equation of state (b(0)<1) indicated that a miscible monolayer with laterally structured microdomains existed. The aggregation number (1/b(0)) was estimated within the order of 6 (pH=6.7) and 3 (pH=10). At pH=3.2, acidic subphase conditions, no phase separation occurs (DeltaG(mix)<0) but a high expanded effect of the monolayer could be noted. The mixed monolayer behavior was no ideal and no aggregates were formed (b(0)> or =1). Such behavior indicates that the polar groups of the molecules interacts each other more strongly by repulsive electrostatic forces than with the more hydrophobic part of the molecule.