Body Mass Estimates in Extinct Mammals from Limb Bone Dimensions: the Case of North American Hyaenodontids

The body mass estimation of several limb bone dimensions (shaft cross-sectional properties, articular sizes, and bone lengths) were examined using bivariate linear regression analyses. The sample included taxonomically and behaviourally diverse small to medium-sized Recent carnivorans and carnivorous marsupials. All examined limb bone dimensions indicated low errors (percentage standard error of estimate, 8–13) for the body mass estimations. Among them, humeral and femoral shaft properties correlated best with body weight, while limb bone lengths gave larger errors. Both humeral and femoral head dimensions have relatively large individual variations, and distal humeral articular dimensions seem to be influenced more by phylogenetic differences. The regressions based on each locomotor group gave slightly lower errors than those based on the total pooled sample. The results were then applied to hyaenodontid creodonts from the Eocene–Oligocene of North America. The estimated body masses (kg) are: Arfia , 5.4–9.5; Prototomus , <6.0; Pyrocyon , 2.6; Sinopa , 1.3–1.4; Tritemnodon , 7.6–13; Prolimnocyon , 1.6; Thinocyon , 0.7–2.5; Machaeroides , 12; Limnocyon , 7.8– 16; Hyaenodon , 9.1–43. The various limb bone dimensions give different body mass values, but the variation in estimates is smaller compared to those derived from dental or cranial measurements.     

Does skeletal anatomy reflect adaptation to locomotor patterns? cortical and trabecular architecture in human and nonhuman anthropoids

Although the correspondence between habitual activity and diaphyseal cortical bone morphology has been demonstrated for the fore- and hind-limb long bones of primates, the relationship between trabecular bone architecture and locomotor behavior is less certain. If sub-articular trabecular and diaphyseal cortical bone morphology reflects locomotor patterns, this correspondence would be a valuable tool with which to interpret morphological variation in the skeletal and fossil record. To assess this relationship, high-resolution computed tomography images from both the humeral and femoral head and midshaft of 112 individuals from eight anthropoid genera (Alouatta, Homo, Macaca, Pan, Papio, Pongo, Trachypithecus, and Symphalangus) were analyzed. Within-bone (sub-articular trabeculae vs. mid-diaphysis), between-bone (forelimb vs. hind limb), and among-taxa relative distributions (femoral:humeral) were compared. Three conclusions are evident: (1) Correlations exists between humeral head sub-articular trabecular bone architecture and mid-humerus diaphyseal bone properties; this was not the case in the femur. (2) In contrast to comparisons of inter-limb diaphyseal bone robusticity, among all species femoral head trabecular bone architecture is significantly more substantial (i.e., higher values for mechanically relevant trabecular bone architectural features) than humeral head trabecular bone architecture. (3) Interspecific comparisons of femoral morphology relative to humeral morphology reveal an osteological "locomotor signal" indicative of differential use of the forelimb and hind limb within mid-diaphysis cortical bone geometry, but not within sub-articular trabecular bone architecture.     

Hand osteoarthritis and bone loss: Is there an inverse relationship?

An inverse relationship between osteoarthritis (OA) and bone loss has been supported in clinical research, but there has been little research on bioarchaeological skeletal remains. The current study examines 115 adults from a prehistoric hunter–gatherer population to aid in determining whether hand OA and bone loss are negatively correlated. OA lipping is scored on a four-point scale on left and right trapezia, MC1s, and MC2s and then analyzed with regard to their relationships with sex, age, right MC2 cortical index, and left and right MC1 robusticity, midshaft circumference, and midshaft diameter values. With sexes and ages combined, higher OA scores are found in individuals with greater midshaft diameters. However, lower cortical indices were found in individuals with higher right MC2 OA scores. The data presented tenuously support that bone loss is lower in individuals with more severe osteoarthritis, but age-related changes in bone deposition may make cortical index and other external shaft dimensions an unsuitable variable to examine this relationship.     

Elastic properties of external cortical bone in the craniofacial skeleton of the rhesus monkey

Knowledge of elastic properties and of their variation in the cortical bone of the craniofacial skeleton is indispensable for creating accurate finite-element models to explore the biomechanics and adaptation of the skull in primates. In this study, we measured elastic properties of the external cortex of the rhesus monkey craniofacial skeleton, using an ultrasonic technique. Twenty-eight cylindrical cortical specimens were removed from each of six craniofacial skeletons of adult Macaca mulatta. Thickness, density, and a set of longitudinal and transverse ultrasonic velocities were measured on each specimen to allow calculation of the elastic properties in three dimensions, according to equations derived from Newton's second law and Hooke's law. The axes of maximum stiffness were determined by fitting longitudinal velocities measured along the perimeter of each cortical specimen to a sinusoidal function. Results showed significant differences in elastic properties between different functional areas of the rhesus cranium, and that many sites have a consistent orientation of maximum stiffness among specimens. Overall, the cortical bones of the rhesus monkey skull can be modeled as orthotropic in many regions, and as transversely isotropic in some regions, e.g., the supraorbital region. There are differences from human crania, suggesting that structural differences in skeletal form relate to differences in cortical material properties across species. These differences also suggest that we require more comparative data on elastic properties in primate craniofacial skeletons to explore effectively the functional significance of these differences, especially when these differences are elucidated through modeling approaches, such as finite-element modeling.     

Body size, locomotion, and long bone cross-sectional geometry in indriid primates.

The geometry of the midshaft cross-sections of the femur and humerus of five indriid species was analysed. Internal (marrow cavity) and external diameters were measured on X-rays in the anteroposterior (a-p) and mediolateral (m-l) planes; cross-sectional areas, second moments of area, and section moduli were calculated using formulae for a hollow ellipse. Cortical thickness, robusticity indices (relating external diameters to the length of the bones), and a-p/m-l shape variables were also calculated. Model II regression was supplemented by analyses of correlation between size and shape. Indriids are saltatory, i.e., their locomotion is dominated by the hind limbs. Accordingly, the femur is more rigid than the humerus, and it shows a consistent difference between the a-p and m-l planes in measures related to bending strength. Cortical thickness varies considerably both within and across species. The type specimen of the new species Propithecus tattersalli is virtually indistinguishable from P. verreauxi on the basis of its long bone cross-sectional geometry. Femoral robusticity is uncorrelated with size, but humeral robusticity decreases significantly with increasing size. Femoral shape variables (a-p/m-l) are all negatively correlated with body size, indicating that m-l dimensions of the femur increase at a faster rate than do a-p dimensions. The highly loaded plane of movement seems to be more reinforced in the smaller species. Contrary to static biomechanical scaling predictions of positive allometry, all cross-sectional parameters scale relatively close to isometry. It is concluded that either changes in locomotor performance must compensate for the weight-related increase in forces and moments or that the larger-bodied animals operate appreciably closer to the limits of their safety margins.     

Age changes in the external dimensions of adult bone

Humeri from a large, ossuary-derived sample are used to demonstrate that considerable size variability is introduced to transverse skeletal measurements when young adults and older adults are pooled. Humeri from young adults (epiphyseal lines still visible, N ≈? 25) are smaller in transverse dimensions than those of older adults (N ≈? 300). Among left humeri, only shaft diameters demonstrate statistically significant differences. The right humeri, however, show statistically significant differences for six of the eight measurements. The increased size of the older adult humeri reflects the fact that appositional growth continues throughout adulthood. The more pronounced differences seen on the right side probably reflect developing dominance asymmetry. Recognition of this source of intrasample variability will influence the choice of skeletal measurements used for population comparisons and/or indicators of robusticity.     

Hibernation does not reduce cortical bone density,area or second moments of inertia in woodchucks (Marmota monax)

Long periods of inactivity in most mammals result in bone loss that may not be completely recoverable during an individual's lifetime regardless of future activity. Prolonged inactivity is normal during hibernation, but it remains uncertain whether hibernating mammals suffer decreased bone properties after hibernation that affects survival. We test the hypothesis that relative cortical area (C_A), apparent density, bone area fraction (B.Ar/T.Ar), and moments of inertia do not differ between museum samples of woodchucks (Marmota monax) collected before and after hibernation. We used peripheral quantitative computed tomography to examine bone geometry in the femur, tibia, humerus and mandible. We see little evidence for changes in bone measures with hibernation supporting our hypothesis. In fact, when including subadults to increase sample sizes and controlling age statistically, we observed a trend toward increased bone properties following hibernation. Diaphyses were significantly denser in the humerus, femur, and tibia after hibernation, and relative mandibular cortical area was significantly larger. Similarly, relative mechanical indices were significantly larger in the mandible after hibernation. Although tests of individual measures in many cases were not significantly different prehibernation versus posthibernation, the overall pattern of average increase posthibernation was significant for relative C_A and densities as well as relative diaphyseal mechanical indices when examining outcomes collectively. The exception to this pattern was a reduction in metaphyseal trabecular bone following hibernation. Individually, only humeral B.Ar/T.Ar was significantly reduced, but the average reduction in trabecular measures post‐hibernation was significant when examined collectively. Because the sample included subadults, we suggest that much of the increased bone relates to their continued growth during hibernation. Our results indicate that woodchucks are more similar to large hibernators that maintain skeletal integrity compared to smaller‐bodied hibernators that may lose bone. This result suggests a potential size‐related trend in bone response to hibernation across mammals. J. Morphol., 2012. © 2012Wiley Periodicals, Inc.     

Articular and diaphyseal remodeling of the proximal femur with changes in body mass in adults.

Proximal femoral dimensions were measured from radiographs of 80 living subjects whose current body weight and body weight at initial skeletal maturity (18 years) could be ascertained. Results generally support the hypothesis that articular size does not change in response to changes in mechanical loading (body weight) in adults, while diaphyseal cross-sectional size does. This can be explained by considering the different bone remodeling constraints characteristic of largely trabecular bone regions (articulations) and largely compact cortical bone regions (diaphyses). The femoral neck shows a pattern apparently intermediate between the two, consistent with its structure. When the additional statistical "noise" created by an essentially static femoral head size is accounted for, the present study supports other studies that have demonstrated rather marked positive allometry in femoral articular and shaft cross-sectional dimensions to body mass among adult humans. Body weight prediction equations developed from these data give reasonable results for modern U.S. samples, with average percent prediction errors of about 10%-16% for individual weights and about 2% for sample mean weights using the shaft dimension equations. When predicting body weight from femoral head size in earlier human samples, a downward correction factor of about 10% is suggested to account for the increased adiposity of very recent U.S. adults.     

小熊猫肾脏和输尿管的组织学研究

小熊猫的肾脏呈蚕豆形,表面光滑不分叶,只有1个肾锥体和1个肾盏,无肾盂。肾脏皮质内可见皮质迷路和髓放线。皮质迷路内有近曲小管、远曲小管和肾小体等结构。髓放线内有近端小管直部和远端小管直部。髓质可分为外髓和内髓两个区域。外髓有较多的集合管断面,少量的远端小管直部和细段,较多的直小血管束。内髓部位有大量的细段和乳头管。各种泌尿小管之间有少量的疏松结缔组织构成的间质,间质内有丰富的毛细血管。输尿管横切面呈圆形或卵圆形,管腔呈不规则的裂隙状。管壁由粘膜、肌肉层和外膜组成。并与大熊猫肾脏和输尿管的组织结构作了比较研究。     

The scaling of skeletal microanatomy in non-human primates

The study of scale-correlated changes in the external dimensions and cross-sectional geometry of primate long bones is fundamental to our understanding of primate limb bone structural adaptation. To date, however, there have been no studies of the effects of mechanical loading on patterns of skeletal scaling at the microstructural level. To remedy this, we analysed patterns of microanatomical scaling in the humeri and femora of 107 adult primates belonging to the families Galagonidae and Cercopithecidae. Seven species were included in our analysis. Proximal, midshaft, and distal sections of humeri and femora of each individual were examined and secondary osteonal and cortical area were measured. Secondary osteonal area scales positively allometrically with cortical cross-sectional area and with body mass. This pattern holds generally for humeri and femora—both within and across families. However, there are striking dissimilarities in the relative strengths of the allometric coefficients for humeri and femora measured for different families. These distinctions appear to be related to differences in the ways in which fore- and hindlimbs are loaded. Such differences highlight the promise of microstructural data and the importance of examining the confounding effects of locomotory behaviour in studies of skeletal scaling.     

The Mechanical Benefit of Medial Support Screws in Locking Plating of Proximal Humerus Fractures

Background

The purpose of this study was to evaluate the biomechanical advantages of medial support screws (MSSs) in the locking proximal humeral plate for treating proximal humerus fractures.

Methods

Thirty synthetic left humeri were randomly divided into 3 subgroups to establish two-part surgical neck fracture models of proximal humerus. All fractures were fixed with a locking proximal humerus plate. Group A was fixed with medial cortical support and no MSSs; Group B was fixed with 3 MSSs but without medial cortical support; Group C was fixed with neither medial cortical support nor MSSs. Axial compression, torsional stiffness, shear stiffness, and failure tests were performed.

Results

Constructs with medial support from cortical bone showed statistically higher axial and shear stiffness than other subgroups examined (P<0.0001). When the proximal humerus was not supported by medial cortical bone, locking plating with medial support screws exhibited higher axial and torsional stiffness than locking plating without medial support screws (P≤0.0207). Specimens with medial cortical bone failed primarily by fracture of the humeral shaft or humeral head. Specimens without medial cortical bone support failed primarily by significant plate bending at the fracture site followed by humeral head collapse or humeral head fracture.

Conclusions

Anatomic reduction with medial cortical support was the stiffest construct after a simulated two-part fracture. Significant biomechanical benefits of MSSs in locking plating of proximal humerus fractures were identified. The reconstruction of the medial column support for proximal humerus fractures helps to enhance mechanical stability of the humeral head and prevent implant failure.     

Sex determination of prehistoric central California skeletal remains using discriminant analysis of the femur and humerus

A large sample (n = 370) of Central California prehistoric skeletal remains was analyzed for sexual dimorphism of long bones using nine femoral and nine humeral dimensions. Sex of all individuals was assessed using traits of the os pubis. Discriminant analysis was done separately for the robust Early Horizon sample and the Middle/Late Horizon sample. Use of multiple variables did not produce appreciably better results over the use of several of the best variables, analyzed singly. Attention is focused on measurements of maximum diameter femoral head, femoral bicondylar width, and diameter of the humeral head (transverse or vertical). These variables produce excellent separation of the sexes with about 90% accuracy for the Middle/Late Horizon sample. They have been overlooked in the recent literature in which the relative values of length versus midshaft dimensions are debated. The measurements found to be superior in this study are taken at the ends of the bones where durability of these regions is indicated by large sample sizes found in this study. We suggest workers redirect their focus from the midshaft to the ends of the long bones. The discriminant analyses presented here have greater accuracy than most claims for either long bone or cranial sex determination. These standards, based on two samples with differing robusticity, may have applicability for workers in other areas who lack large skeletal samples.     

Biomechanical scaling of the hominoid mandibular symphysis

Experimental investigation of mandibular bone strain in cercopithecine primates has established that the mandible is bent in the transverse plane during the power stroke of mastication. Additional comparative work also supports the assumption that the morphology of the mandibular symphysis is functionally linked to the biomechanics of lateral transverse bending, or "wishboning" of the mandibular corpus. There are currently no experimental data to verify that lateral transverse bending constitutes an important loading regime among hominoid primates. There are, however, allometric models from cercopithecoid primates that allow prediction of scaling patterns in hominoid mandibular dimensions that would be consistent with a mechanical environment that includes wishboning as a significant component. This study uses computed tomography (CT) scans to visualize cortical bone distribution in the anterior corpus of a sample of four genera of extant hominoids. From the cortical bone contours, area properties of the mandibular symphysis are calculated, and these variables are subjected to an allometric analysis to detect whether scaling of jaw dimensions are consistent with a wishboning loading regime. Scaling of the hominoid symphysis recalls patterns observed in cercopithecoid monkeys, which lends indirect support for the hypothesis that wishboning is an integral part of the masticatory loading environment in living apes. Inclination of the symphysis, rather than changes in cross-sectional shape or development of the superior transverse torus, represents a morphological solution for minimizing the potentially harmful effects of wishboning in the jaws of these primates.     

Limb bone histology and growth in Placerias hesternus (Therapsida: Anomodontia) from the Upper Triassic of North America

Abstract: Patterns of bone deposition are reported and deduced from mid‐shaft sections of 21 limb bones of the dicynodont Placerias hesternus from the Placerias Quarry (Upper Triassic), Arizona, USA. All sampled elements of P. hesternus have a large medullary cavity completely filled with bony trabeculae surrounded by dense cortical bone. Dense Haversian bone extends from the perimedullary region to at least the mid‐cortex in all sampled bones. Primary bone in the outer cortex of limb elements of P. hesternus is generally zonal fibrolamellar with a peripheral layer of parallel‐fibred bone. These data suggest periodic rapid osteogenesis followed by slower growth. Among dicynodonts, this strategy is most similar to growth previously reported in other Triassic (Lystrosaurus, Wadiasaurus) and some Permian taxa (Oudenodon, Tropidostoma). An external fundamental system (EFS), suggesting complete or near complete cessation of appositional growth, is present in the largest tibia. This is the first report of EFS in dicynodonts and may represent the attainment of maximum size in P. hesternus. Slow‐growing peripheral bone was observed in elements of varying size in our sample and may support a differential growth pattern between P. hesternus individuals from this locality. A complete growth series of P. hesternus, analysis of Placerias specimens from other localities, and further sampling of other Upper Triassic dicynodonts are needed to better understand a more complete picture of the growth and remodelling patterns that we have initially investigated.     

T. Aidan Cockburn, 1912--1981: a memorial

This study explores age-related thinning of cortical bone in an area of the femur that is becoming of increasing clinical interest. It is based on measurements of medial-lateral and posterior-anterior radiographs of the proximal one-third of the right femur, below the greater trochanter. The study population consisted of 458 skeletons from the Terry collection and included approximately equal numbers of blacks and whites, males and females, aged 20 to 98 years. Cortical thicknesses were measured at 11 levels, beginning with a line drawn perpendicular to the linea aspera at the level of the inferior border of the greater trochanter. The four quadrants (medial, lateral, anterior, posterior) differed in amount of change with age. In general, except for the relatively thick medial cortex, intertrochanteric levels showed less change than subtrochanteric levels. It is postulated that this is because the greatest remodeling activity takes place in trabecular rather than cortical bone in the intertrochanteric region. The anterior and posterior cortex showed the most regular and greatest amount of thinning with age. In males at lower levels, there was little or no loss in either medial or lateral cortex, but females showed considerable loss after the sixth decade. It is suggested that a stress-related “maintenance” factor retards cortical thinning in these quadrants. A review of the literature suggests that age-related cortical loss in the femur may have been accelerated in archaeological population, compared with modern groups.     

Multi-modal Imaging of Angiogenesis in a Nude Rat Model of Breast Cancer Bone Metastasis Using Magnetic Resonance Imaging,Volumetric Computed Tomography and Ultrasound

Angiogenesis is an essential feature of cancer growth and metastasis formation. In bone metastasis, angiogenic factors are pivotal for tumor cell proliferation in the bone marrow cavity as well as for interaction of tumor and bone cells resulting in local bone destruction. Our aim was to develop a model of experimental bone metastasis that allows in vivo assessment of angiogenesis in skeletal lesions using non-invasive imaging techniques.For this purpose, we injected 10⁵ MDA-MB-231 human breast cancer cells into the superficial epigastric artery, which precludes the growth of metastases in body areas other than the respective hind leg¹. Following 25-30 days after tumor cell inoculation, site-specific bone metastases develop, restricted to the distal femur, proximal tibia and proximal fibula¹. Morphological and functional aspects of angiogenesis can be investigated longitudinally in bone metastases using magnetic resonance imaging (MRI), volumetric computed tomography (VCT) and ultrasound (US).MRI displays morphologic information on the soft tissue part of bone metastases that is initially confined to the bone marrow cavity and subsequently exceeds cortical bone while progressing. Using dynamic contrast-enhanced MRI (DCE-MRI) functional data including regional blood volume, perfusion and vessel permeability can be obtained and quantified^2-4. Bone destruction is captured in high resolution using morphological VCT imaging. Complementary to MRI findings, osteolytic lesions can be located adjacent to sites of intramedullary tumor growth. After contrast agent application, VCT angiography reveals the macrovessel architecture in bone metastases in high resolution, and DCE-VCT enables insight in the microcirculation of these lesions^5,6. US is applicable to assess morphological and functional features from skeletal lesions due to local osteolysis of cortical bone. Using B-mode and Doppler techniques, structure and perfusion of the soft tissue metastases can be evaluated, respectively. DCE-US allows for real-time imaging of vascularization in bone metastases after injection of microbubbles⁷.In conclusion, in a model of site-specific breast cancer bone metastases multi-modal imaging techniques including MRI, VCT and US offer complementary information on morphology and functional parameters of angiogenesis in these skeletal lesions.     

Intraskeletal variability in bone mass

For methodological or other reasons, a variety of skeletal elements are analyzed and subsequently used as a basis for describing general bone loss and mass. However, bone loss and mass may not be uniform within and among skeletal elements of the same individual because of biomechanical factors. We test the hypothesis that a homogeneity in bone mass exists among skeletal elements of the same individual. Measures indicative of bone mass were calculated from the midshafts of six skeletal elements from the same individuals (N = 41). The extent of intraskeletal variability in bone mass (relative cortical area) was then examined for the entire sample, according to age, sex, and pathological status. The results of the analysis showed that all measures reflect a heterogeneity in bone mass (P 相似文献   

Correlative 3D‐imaging of Pipistrellus penis micromorphology: Validating quantitative microCT images with undecalcified serial ground section histomorphology

Detailed knowledge of histomorphology is a prerequisite for the understanding of function, variation, and development. In bats, as in other mammals, penis and baculum morphology are important in species discrimination and phylogenetic studies. In this study, nondestructive 3D‐microtomographic (microCT, µCT) images of bacula and iodine‐stained penes of Pipistrellus pipistrellus were correlated with light microscopic images from undecalcified surface‐stained ground sections of three of these penes of P. pipistrellus (1 juvenile). The results were then compared with µCT‐images of bacula of P. pygmaeus, P. hanaki, and P. nathusii. The Y‐shaped baculum in all studied Pipistrellus species has a proximal base with two club‐shaped branches, a long slender shaft, and a forked distal tip. The branches contain a medullary cavity of variable size, which tapers into a central canal of variable length in the proximal baculum shaft. Both are surrounded by a lamellar and a woven bone layer and contain fatty marrow and blood vessels. The distal shaft consists of woven bone only, without a vascular canal. The proximal ends of the branches are connected with the tunica albuginea of the corpora cavernosa via entheses. In the penis shaft, the corpus spongiosum‐surrounded urethra lies in a ventral grove of the corpora cavernosa, and continues in the glans under the baculum. The glans penis predominantly comprises an enlarged corpus spongiosum, which surrounds urethra and baculum. In the 12 studied juvenile and subadult P. pipistrellus specimens the proximal branches of the baculum were shorter and without marrow cavity, while shaft and distal tip appeared already fully developed. The present combination with light microscopic images from one species enabled a more reliable interpretation of histomorphological structures in the µCT‐images from all four Pipistrellus species. J. Morphol. 276:695–706, 2015. © 2015 Wiley Periodicals, Inc.     

Skeletal growth and the changing genetic landscape during childhood and adulthood

Growth, development, and decline of the human skeleton are of central importance to physical anthropology. All processes of skeletal growth (longitudinal growth as well as gains and losses of bone mass) are subjected to environmental and genetic influences. These influences, and their relative contributions to the phenotype, can be asserted at any stage of life. We present here the gross phenotypic and genetic landscapes of four skeletal traits, and show how they vary across the life span. Phenotypic sex differences are found in bone diameter and cortical index (a ratio of cortical thickness over bone diameter) at a very early age and continue throughout most of life. Sexual dimorphism in summed cortical thickness and bone length, however, is not evident until shortly after the pubertal growth spurt. Genetic contributions (heritability) to these skeletal phenotypes are generally moderate to high. Bone length and bone diameter (which both scale with body size) tend to have the highest heritability, with heritability of bone length fairly stable across ages (with a notable dip in early childhood) and that of bone diameter peaking in early childhood. The bone traits summed cortical thickness and cortical index that may better reflect bone mass, a more plastic phenomenon, have slightly lower genetic influences, on average. Results from our phenotypic and genetic landscapes serve three key purposes: 1) demonstration of the integrated nature of the genetic and environmental underpinnings of skeletal form, 2) identification of periods of bone's relative sensitivity to genetic and environmental influences, 3) and stimulation of hypotheses predicting the effects of exposure to environmental variables on the skeleton, given variation in the underlying genetic architecture. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc.