Effects of dietary nitrate supplementation on the oxygen cost of exercise and walking performance in individuals with type 2 diabetes: a randomized,double-blind,placebo-controlled crossover trial

Dietary nitrate supplementation has been shown to reduce the oxygen (O₂) cost of exercise and enhance exercise tolerance in healthy individuals. This study assessed whether similar effects could be observed in individuals with type 2 diabetes (T2DM). In a randomized, double-blind, placebo-controlled crossover study, 48 participants with T2DM supplemented their diet for 4 days with either nitrate-rich beetroot juice (70 ml/day, 6.43 mmol nitrate/day) or nitrate-depleted beetroot juice as placebo (70 ml/day, 0.07 mmol nitrate/day). After each intervention period, resting plasma nitrate and nitrite concentrations were measured subsequent to participants completing moderate-paced walking. Pulmonary gas exchange was measured to assess the O₂ cost of walking. After a rest period, participants performed the 6-min walk test (6MWT). Relative to placebo, beetroot juice resulted in a significant increase in plasma nitrate (placebo, 57±66 vs beetroot, 319±110 µM; P < 0.001) and plasma nitrite concentration (placebo, 680±256 vs beetroot, 1065±607 nM; P < 0.001). There were no differences between placebo juice and beetroot juice for the O₂ cost of walking (946±221 vs 939±223 ml/min, respectively; P = 0.59) and distance covered in the 6MWT (550±83 vs 554±90 m, respectively; P = 0.17). Nitrate supplementation did not affect the O₂ cost of moderate-paced walking or improve performance in the 6MWT. These findings indicate that dietary nitrate supplementation does not modulate the response to exercise in individuals with T2DM.     

Immobilization of catalase onto Eupergit C and its characterization

Bovine liver catalase was covalently immobilized onto Eupergit C. Optimum conditions of immobilization: pH, buffer concentration, temperature, coupling time and initial catalase amount per gram of carrier were determined as 7.5, 1.0 M, 25 °C, 24 h and 4.0 mg/g, respectively. V_max and K_m were determined as 1.4(±0.2) × 10⁵ U/mg protein and 28.6 ± 3.6 mM, respectively, for free catalase, and as 3.7(±0.4) × 10³ U/mg protein and 95.9 ± 0.6 mM, respectively, for immobilized catalase. The thermal stability of the immobilized catalase in terms of half-life time (29.1 h) was comparably higher than that of the free catalase (9.0 h) at 40 °C. Comparison of storage stabilities showed that the free catalase completely lost its activity at the end of 11 days both at room temperature and 5 °C. However, immobilized catalase retained 68% of its initial activity when stored at room temperature and 79% of its initial activity when stored at 5 °C at the end of 28 days. The highest reuse number of immobilized catalase was 22 cycles of batch operation when 40 mg of immobilized catalase loaded into the reactor retaining about 50% of its original activity. In the plug flow type reactor, the longest operation time was found as 82 min at a substrate flow rate of 2.3 mL/min when the remaining activity of 40 mg immobilized catalase was about 50% of its original activity. The resulting immobilized catalase onto Eupergit C has good reusability, thermal stability and long-term storage stability.     

A comparison of the kinetic properties of free and immobilized Aspergillus oryzae β-galactosidase

The objective of this work was to compare the properties of free and immobilized β-galactosidase (Aspergillus oryzae), entrapped in alginate–gelatin beads and cross-linked with glutaraldehyde. The free and immobilized forms of the enzyme showed no decrease in enzyme activity when incubated in buffer solutions in pH ranges of 4.5–7.0. The kinetics of lactose hydrolysis by the free and immobilized enzymes were studied at maximum substrate concentrations of 90 g/L and 140 g/L, respectively, a temperature of 35 °C and a pH of 4.5. The Michaelis–Menten model with competitive inhibition by galactose fit the experimental results for both forms. The K_m and V_m values of the free enzyme were 52.13 ± 2.8 mM and 2.56 ± 0.3 g_glucose/L min mg_enzyme, respectively, and were 60.30 ± 3.3 mM and 1032.07 ± 51.6 g_lactose/min m³_catalyst, respectively, for the immobilized form. The maximum enzymatic activity of the soluble form of β-galactosidase was obtained at pH 4.5 and 55 °C. Alternatively, the immobilized form was most active at pH 5.0 at 60 °C. The free and immobilized enzymes presented activation energies of 6.90 ± 0.5 kcal/mol and 7.7 ± 0.7 kcal/mol, respectively, which suggested that the immobilized enzyme possessed a lower resistance to substrate transfer.     

Comparative biochemical characterization of soluble and chitosan immobilized β-galactosidase from Kluyveromyces lactis NRRL Y1564

An investigation was conducted on the production of β-galactosidase (β-gal) by different strains of Kluyveromyces, using lactose as a carbon source. The maximum enzymatic activity of 3.8 ± 0.2 U/mL was achieved by using Kluyveromyces lactis strain NRRL Y1564 after 28 h of fermentation at 180 rpm and 30 °C. β-gal was then immobilized onto chitosan and characterized based on its optimal operation pH and temperature, its thermal stability and its kinetic parameters (K_m and V_max) using o-nitrophenyl β-d-galactopyranoside as substrate. The optimal pH for soluble β-gal activity was found to be 6.5 while the optimal pH for immobilized β-gal activity was found to be 7.0, while the optimal operating temperatures were 50 °C and 37 °C, respectively. At 50 °C, the immobilized enzyme showed an increased thermal stability, being 8 times more stable than the soluble enzyme. The immobilized enzyme was reused for 10 cycles, showing stability since it retained more than 70% of its initial activity. The immobilized enzyme retained 100% of its initial activity when it was stored at 4 °C and pH 7.0 for 93 days. The soluble β-gal lost 9.4% of its initial activity when it was stored at the same conditions.     

Development of Novel Glucose oxidase Immobilization on Graphene/Gold nanoparticles/Poly Neutral red modified electrode

Glucose oxidase (GOx) was immobilized onto glassy carbon electrode (GCE) that modified by reduced graphene oxide-gold nanoparticles- poly neutral red (RGO/AuNPs/PNR) nanocomposite. The composite was analyzed by scanning electron microscope (SEM), energy dispersive x-ray (EDX) spectroscopy, atomic force microscopy (AFM), attenuated total reflectance (ATR), cyclic voltammetry (CV), chronoamperometry and electrochemical impedance spectroscopy (EIS). SEM/EDX analysis showed the morphological of the nanocomposite. AFM results showed the morphology and structure of the RGO/AuNPs and RGO surfaces. The covalent bonding between glucose oxidase and composite was confirmed by ATR technique. The electrochemical experiments were done in 100 mM phosphate buffer at pH 7 and temperature of 25 °C with three electrodes including Ag/AgCl, platinum wire and the modified GCE as the reference electrode, the auxiliary electrode and working electrode respectively. The electrochemical results confirmed the activity and direct electron transfer of immobilized enzyme. The immobilized electroactive GOx concentration was estimated 3.06 × 10⁻¹¹ mol cm⁻². The results showed the immobilized enzyme had a good stability and maintained 90% of its performance after two weeks. The nanocomposite bioanode in an air-birthing biofuel cell and 100 mM glucose concentration showed 176 μWcm⁻² Power density. This strategy could be used for GOx-based biofuel cells.     

Dihydrochalcone glucosides and antioxidant activity from the roots of Anneslea fragrans var. lanceolata

Bioassay-guided fractionation of the roots of Anneslea fragrans var. lanceolata led to the isolation of four dihydrochalcone glucosides, davidigenin-2′-O-(6″-O-4″′-hydroxybenzoyl)-β-glucoside (1), davidigenin-2′-O-(2″-O-4″′-hydroxybenzoyl)-β-glucoside (2), davidigenin-2′-O-(3″-O-4″′-hydroxybenzoyl)-β-glucoside (3), and davidigenin-2′-O-(6″-O-syringoyl)-β-glucoside (4), and 13 known compounds. The structures were identified by means of spectroscopic analysis. Davidigenin-2′-O-(6″-O-syringoyl)-β-glucoside (4), 1-O-3,4-dimethoxy-5-hydroxyphenyl-6-O-(3,5-di-O-methylgalloyl)-β-glucopyranoside (5), lyoniresinol (10), and syringic acid (13) showed ABTS [2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)] cation radical scavenging activity, with SC₅₀ values of 52.6 ± 5.5, 26.0 ± 0.7, 6.0 ± 0.2, and 27.5 ± 0.6 μg/mL in 20 min, respectively. Lyoniresinol (10), isofraxidin (12), and syringic acid (13) also showed DPPH [1,1-diphenyl-2-picrylhydrazyl] radical scavenging activity, with SC₅₀ values of 8.4 ± 1.8, 51.6 ± 2.2, and 4.3 ± 0.7 μg/mL in 30 min, respectively.     

Nitric oxide interacts with mitochondrial complex III producing antimycin-like effects

The effect of NO between cytochromes b and c of the mitochondrial respiratory chain were studied using submitochondrial particles (SMP) from bovine heart and GSNO and SPER-NO as NO sources. Succinate-cytochrome c reductase (complex II-III) activity (222±4 nmol/min. mg protein) was inhibited by 51% in the presence of 500 μM GSNO and by 48% in the presence of 30 μM SPER-NO, in both cases at ~1.25 μM NO. Neither GSNO nor SPER-NO were able to inhibit succinate-Q reductase activity (complex II; 220±9 nmol/min. mg protein), showing that NO affects complex III. Complex II-III activity was decreased (36%) when SMP were incubated with l-arginine and mtNOS cofactors, indicating that this effect is also produced by endogenous NO. GSNO (500 μM) reduced cytochrome b₅₆₂ by 71%, in an [O₂] independent manner. Hyperbolic increases in O₂^•- (up to 1.3±0.1 nmol/min. mg protein) and H₂O₂ (up to 0.64±0.05 nmol/min. mg protein) productions were observed with a maximal effect at 500 μM GSNO. The O₂^•-/H₂O₂ ratio was 1.98 in accordance with the stoichiometry of the O₂^•- disproportionation. Moreover, H₂O₂ production was increased by 72–74% when heart coupled mitochondria were exposed to 500 μM GSNO or 30 μM SPER-NO. SMP incubated in the presence of succinate showed an EPR signal (g=1.99) compatible with a stable semiquinone. This EPR signal was increased not only by antimycin but also by GSNO and SPER-NO. These signals were not modified under N₂ atmosphere, indicating that they are not a consequence to the effect of NOx species on complex III area. These results show that NO interacts with ubiquinone-cytochrome b area producing antimycin-like effects. This behaviour comprises the inhibition of electron transfer, the interruption of the oxidation of cytochromes b, and the enhancement of [UQH^•]_ss which, in turn, leads to an increase in O₂^•- and H₂O₂ mitochondrial production rates.     

Enhanced d-hydantoinase activity performance via immobilized cobalt ion affinity membrane and its kinetic study

Various immobilized metal ions affinity membranes (IMAMs) were prepared from the regenerated cellulose membrane (RC membrane) and chelated with various metal ions such as Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺. The D-hydantoin-hydrolyzing enzyme (DHTase) harboring a poly-His tagged residue was used as a model protein to be immobilized on the prepared IMAMs through the direct metal–protein interaction forces. The adsorption isotherm and the kinetic parameters V_max, K_m,app of DHTase on IMAMs were studied. The cobalt ions chelated IMAM (Co-IMAM) was found to yield the highest specific activity of DHTase. Under the immobilization condition, the cobalt ion chelated amount was 161.4 ± 4.7 μmol/disk with a DHTase activity of 4.1 ± 0.1 U/disk. As compared to the free DHTase, the immobilized DHTase membrane could achieve a broader pH tolerance and higher thermal stability. In addition, 98% of the residual activity could be retained for 7-times repeated use. Only little activity loss was observed within 36-day storage at 4 °C. This is the first report concerning about using cobalt ion as the effective chelated metal ion for simultaneous purification and immobilization operation.     

Immobilization of lipase on epoxy-activated Purolite® A109 and its post-immobilization stabilization

In this study, Purolite^® A109, polystyrenic macroporous resin, was used as immobilization support due to its good mechanical properties and high particle diameter (400 μm), which enables efficient application in enzyme reactors due to lower pressure drops. The surface of support had been modified with epichlorhydrine and was tested in lipase immobilization. Optimized procedure for support modification proved to be more efficient than conventional procedure for hydroxy groups (at 22 °C for 18 h), since duration of procedure was shortened to 40 min by performing modification at 52 °C resulting with almost doubled concentration of epoxy groups (563 μmol g⁻¹). Lipase immobilized on epoxy-modified support showed significantly improved thermal stability comparing to both, free form and commercial immobilized preparation (Novozym^® 435). The highest activity (47.5 IU g⁻¹) and thermal stability (2.5 times higher half-life than at low ionic strength) were obtained with lipase immobilized in high ionic strength. Thermal stability of immobilized lipase was further improved by blocking unreacted epoxy groups on supports surface with amino acids. The most efficient was treatment with phenylalanine, since in such a way blocked immobilized enzyme retained 65% of initial activity after 8 h incubation at 65 °C, while non-blocked derivative retained 12%.     

A novel ternary NiFe2O4/CuO/FeO-chitosan nanocomposite as a cholesterol biosensor

We report the results of studies relating to the in situ synthesis of a novel ternary NiFe₂O₄/CuO/FeO-chitosan nanocomposite, which could be utilized as a cholesterol biosensor. The phase identification, morphology and particle size of the NiFe₂O₄/CuO/FeO nanocomposite have been investigated via X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscope (HR-TEM) and Fourier transform infrared (FTIR) spectroscopy. The quantification of cholesterol was accomplished by immobilizing cholesterol oxidase (ChOx) onto a chitosan-NiFe₂O₄/CuO/FeO nanocomposite (NiFe₂O₄/CuO/FeO-CH NC) deposited onto an indium-tin-oxide (ITO) glass substrate via the sol–gel technique. The electrochemical study results of the biocompatible ChOx/NiFe₂O₄/CuO/FeO-CH/ITO electrode reveal good linearity (50–5000 mg/L), a low detection limit (313 mg/L), high sensitivity (0.043 μA/(mg/L cm^?2)), a fast response time (10 s) and a shelf-life of 3 months. The low Michaelis–Menten constant (K_m) of 80 mg/L (0.21 mM) indicates the high affinity of ChOx for the analytes. Further, this bioelectrode has been used in clinical applications to estimate cholesterol levels with negligible interference (2%) from analytes present in human serum samples.     

Efficient preparation of enantiopure l-tert-leucine through immobilized penicillin G acylase catalyzed kinetic resolution in aqueous medium

Racemic _DL-tert-leucine (_DL-Tle) was resolved to obtain enantiopure _L-Tle through enantioselective hydrolysis of its N-phenylacetyl derivative with immobilized penicillin G acylase (PGA). The effects of pH, reaction temperature, substrate concentration and reaction time on the reaction were investigated. The reaction was conveniently carried out at 0.4 M substrate concentration in water at pH 8.0 and 30 °C. Under the optimized reaction conditions, _L-Tle was obtained in an enantiopure form (>99% ee) with 45.8% substrate conversion after 4 h. The thermal stability and operational stability of immobilized PGA were examined. Furthermore, the preparation of _L-Tle was successfully performed in a recirculating packed bed reactor (RPBR) system and immobilized PGA exhibited a long-term stability for 51 days with a slight decrease of activity. The isolated _D-enantiomer was racemized at 160 °C for 15 min and reused as substrate. The results obtained clearly demonstrated a potential for industrial application of immobilized PGA in the preparation of _L-Tle through enantioselective hydrolysis of its N-phenylacetyl derivative.     

Immobilized glucose oxidase on different supports for biotransformation removal of glucose from oligosaccharide mixtures

Four immobilized forms of glucose oxidase (GOD) were used for biotransformation removal of glucose from its mixture with dextran oligosaccharides. GOD was biospecifically bound to Concanavalin A-bead cellulose (GOD-ConA-TBC) and covalently to triazine-bead cellulose (GOD-TBC). Eupergit C and Eupergit CM were used for preparation of other two forms of immobilized GOD: GOD-EupC and GOD-EupCM. GOD-ConA-TBC and GOD-EupC exhibited the best operational and storage stabilities. pH and temperature optima of these two immobilized enzyme forms were broadened and shifted to higher values (pH 7 and 35 °C) in comparison with those of free GOD. The decrease of V_max values after immobilization was observed, from 256.8 ± 7.0 μmol min⁻¹ mg_GOD⁻¹ for free enzyme to 63.8 ± 4.2 μmol min⁻¹ mg_GOD⁻¹ for GOD-ConA-TBC and 45 ± 2.7 μmol min⁻¹ mg_GOD⁻¹ for GOD-EupC, respectively. Depending on the immobilization mode, the immobilized GODs were able to decrease the glucose content in solution to 3.8–15.6% of its initial amount The best glucose conversion, was achieved by an action of GOD-EupCM on a mixture of 100 g dextran with 9 g of glucose (i.e. 98.7% removal of glucose).     

Exogenous sodium sulfide improves morphological and physiological responses of a hybrid Populus species to nitrogen dioxide

Gaseous nitrogen dioxide (NO₂) can disturb normal plant growth and trigger complex physiological responses. NO₂-induced responses are influenced by biotic or abiotic factors. In this study, we investigated the effects of exogenous sodium sulfide (Na₂S, 5 mmol L⁻¹) on epidermis and stomata related physico-chemical responses of hybrid poplar cuttings (Pouplus alba × P. berolinensis) to gaseous NO₂ (4 μl 1⁻¹) for three time periods (0, 14 and 48 h). We also investigated hydrogen sulfide (H₂S), nitrate-nitrogen and nitrate reductase activity (NR) in control and Na₂S treated plants. Our results showed that NO₂ exposure for 48 h led to the decline of NR, maximal PSII quantum yield (F_v/F_m), net photosynthetic rate (P_n), and dark respiration rate (R_d). The maximum rate for the post-illumination carbon dioxide burst (PIB) occurred in 48-h exposed leaves 13–15 s after darkening. Moreover, NO₂ exposure resulted in a significant increase in nitrogen percentage (from 0 to 33%) and a decrease in the macro and micro-elements of leaf surface. Spraying Na₂S aqueous solution on the leaf surfaces significantly increased the thicknesses of palisade/spongy tissue and H₂S content. Na₂S pretreatment alleviated NO₂-caused toxic effects as indicated by increased NR and higher values of P_n, F_v/F_m, and actual photochemical efficiency in light (ФPSII) compared with the control. Na₂S pretreatment had no significant impacts on PIB-based photorespiration or elements composition of a leaf surface.     

β-Galactosidase of Aspergillus oryzae immobilized in an ion exchange resin combining the ionic-binding and crosslinking methods: Kinetics and stability during the hydrolysis of lactose

In this work, the hydrolysis kinetics of lactose by Aspergillus oryzae β-galactosidase was studied using the ionic exchange resin Duolite A568 as a carrier. The enzyme was immobilized using a β-galactosidase concentration of 16 g/L in pH 4.5 acetate buffer and an immobilization time of 12 h at 25 ± 0.5 °C. Next, the immobilized β-galactosidase was crosslinked using glutaraldehyde concentration of 3.5 g/L for 1.5 h. The influence of lactose concentration was studied for a range of 5–140 g/L, and the Michaelis–Menten model was fitted well to the experimental results with V_m and K_m values of 0.71 U and 35.30 mM, respectively. The influence of the product galactose as an inhibitor on the hydrolysis reaction was studied. The model that was best fitted to the experimental results was the competitive inhibition by galactose with V_m, K_m and K_i values of 0.77 U, 35.30 mM and 27.44 mM, respectively. The influence of temperature on the enzymatic activity of the immobilized enzyme was studied in the range of 10–80 °C, in which the temperature of the maximum activity was 60 °C, with an activation energy of 5.32 kcal/mol of lactose, using an initial concentration of lactose of 50 g/L in a pH 4.5 sodium acetate buffer solution. The thermal stability of the immobilized biocatalyst was determined to be in the range 55–65 °C. The first-order model described well the kinetics of thermal deactivation for all the temperatures studied. The activation energy of thermal deactivation from immobilized biocatalyst was 66.48 kcal/mol with a half-life of 8.9 h at 55 °C.     

Immobilization of phytase on epoxy-activated Sepabead EC-EP for the hydrolysis of soymilk phytate

In this work, an active phytase concentrated extract from soybean sprout was immobilized on a polymethacrylate-based polymer Sepabead EC-EP which is activated with epoxy groups. The immobilized enzyme exhibited an activity of 0.1 U/g of carrier and activity yield of 64.7%. The optimum temperature and pH for the activity of both free and immobilized enzymes were found as 60 °C and pH 5.0, respectively. The immobilized enzyme was more stable than free enzyme in the range of pH 3.0–8.0 and more than 70% of the original activity was recovered. Both the enzymes completely retained nearly about 84% of their original activity at 65 °C. The K_m and V_max values were measured as 5 mM and 0.63 U/mg for free enzyme and 12.5 mM and 0.71 U/mg for immobilized enzyme, respectively. Free and immobilized soybean sprout phytase enzymes were also used in the biodegradation of soymilk phytate. The immobilized enzyme hydrolysed 92.5% of soymilk phytate in 7 h at 60 °C, as compared with 98% hydrolysis observed for the native enzyme over the same period of time. The immobilization procedure on Sepabead EC-EP is very cheap and also easy to carry out, and the features of the immobilized enzyme are very attractive that the potential for practical application is considerable.     

Synthesis and characterization of a pH-sensitive conjugate of isoniazid with Fe3O4@SiO2 magnetic nanoparticles

The Letter describes the preparation and characterization of a conjugate of isoniazid (INH) with magnetic nanoparticles Fe₃O₄@SiO₂ 115 ± 60 nm in size. The INH molecules were attached to the surface of nanoparticles by a covalent pH-sensitive amidine bond. The conjugate was characterized by X-ray diffraction, SEM, dynamic light scattering, IR spectroscopy and microanalysis. The conjugate released isoniazid under in vitro conditions (pH = 4; 37 °C; t_1/2 ≈ 115 s). In addition, the cytotoxicity of the Fe₃O₄@SiO₂–INH conjugate was evaluated in SK-BR-3 cells using the xCELLigence system.     

Pancreatic lipase inhibitory and antioxidative constituents from the aerial parts of Paeonia lactiflora Pall. (Ranunculaceae)

To date, there have been reports mostly about research results of the peony root in comparison to the aerial parts. According to our study, the aerial parts of P.lactiflora showed superior anti-oxidative and pancreatic lipase inhibitory activities than its root. Especially, the water extract and the ethyl acetate fraction of the ethanol extract exhibited potent pancreatic lipase inhibitory activity by 53.11 ± 1.22% and 46.16 ± 1.55% at the same dose of orlistat (62.5 ± 1.27%). The ethanol extract exhibited the best anti-oxidative activity with IC₅₀ of 17.08 ± 0.9 μg/mL, and the ethyl acetate fraction 19.75 ± 0.02 μg/mL, respectively, comparing to the positive control rutin (IC₅₀, 22.66 ± 0.29 μg/mL). From the anti-oxidative and pancreatic lipase inhibitory active fractions three new compounds, monplacphloroside (1), monplachydroxyquinoside (2) and herbacetin-7-O-β-d-sophoroside (3) were isolated along with 19 (4-22) known ones.Compounds, PGG (14), 1-O-methyl-2,3,4,6-tetra-O-galloyl-β-d-glucopyranose (17) and ethylgallate (9) were found to be the strongest antioxidants and pancreatic lipase inhibitors. Monoterpenes, albiflorin R₂ (19) and albiflorin (20) were determined for the first time as strong pancreatic lipase inhibitors. The presence of the esterified galloyl moiety, with its increasing numbers or the β-lactone cycle within the molecular structure plays an essential role for the enhancement of the pancreatic lipase enzyme inhibitory activity.     

Dietary nitrate reduces maximal oxygen consumption while maintaining work performance in maximal exercise

The anion nitrate—abundant in our diet—has recently emerged as a major pool of nitric oxide (NO) synthase-independent NO production. Nitrate is reduced stepwise in vivo to nitrite and then NO and possibly other bioactive nitrogen oxides. This reductive pathway is enhanced during low oxygen tension and acidosis. A recent study shows a reduction in oxygen consumption during submaximal exercise attributable to dietary nitrate. We went on to study the effects of dietary nitrate on various physiological and biochemical parameters during maximal exercise. Nine healthy, nonsmoking volunteers (age 30 ± 2.3 years, VO_2max 3.72 ± 0.33 L/min) participated in this study, which had a randomized, double-blind crossover design. Subjects received dietary supplementation with sodium nitrate (0.1 mmol/kg/day) or placebo (NaCl) for 2 days before the test. This dose corresponds to the amount found in 100–300 g of a nitrate-rich vegetable such as spinach or beetroot. The maximal exercise tests consisted of an incremental exercise to exhaustion with combined arm and leg cranking on two separate ergometers. Dietary nitrate reduced VO_2max from 3.72 ± 0.33 to 3.62 ± 0.31 L/min, P < 0.05. Despite the reduction in VO_2max the time to exhaustion trended to an increase after nitrate supplementation (524 ± 31 vs 563 ± 30 s, P = 0.13). There was a correlation between the change in time to exhaustion and the change in VO_2max (R² = 0.47, P = 0.04). A moderate dietary dose of nitrate significantly reduces VO_2max during maximal exercise using a large active muscle mass. This reduction occurred with a trend toward increased time to exhaustion implying that two separate mechanisms are involved: one that reduces VO_2max and another that improves the energetic function of the working muscles.     

Ethyl isovalerate synthesis using Candida rugosa lipase immobilized on silica nanoparticles prepared in nonionic reverse micelles

Uniform and monodispersed silica nanoparticles were synthesized with a mean diameter of 100 ± 20 nm as analyzed by Transmission Electron Microscopy (TEM). Glutaraldehyde was used as a coupling agent for efficient binding of the lipase onto the silica nanoparticles. For the hydrolysis of pNPP at pH 7.2, the activation energy within 25–40 °C for free and immobilized lipase was 7.8 and 1.25 KJ/mol, respectively. The V_max and K_m of immobilized lipase at 25 °C for pNPP hydrolysis were found to be 212 μmol/min/mg and 0.3 mM, whereas those for free lipase were 26.17 μmol/min and 1.427 mM, respectively. The lower activation energy of immobilized lipase in comparison to free lipase suggests a change in conformation of the enzyme leading to a requirement for lower energy on the surface of the nanoparticles. A better yield (7 fold higher) of ethyl isovalerate was observed using lipase immobilized onto silica nanoparticles in comparison to free lipase.     

Non-invasive assessment of muscle fiber conduction velocity during an incremental maximal cycling test

Muscle fiber conduction velocity (MFCV) gives critical information on neuromuscular control and can be considered a size principle parameter, being suggestive of motor unit recruitment strategies. MFCV has been recently measured during constant-load sub-maximal cycling exercise and was found to correlate positively with percentage of type I myosin heavy chain.The aim of this study was to test the hypothesis that MFCV measured during an incremental cycling test using surface electromyography (sEMG), can be sensitive to the different metabolic requests elicited by the exercise. In particular, the relationship between ventilatory threshold (T-vent), V^′O_2max and MFCV was explored.Eleven male physically active subjects (age 30 ± 9 years) undertook a 1-min incremental cycling test to exhaustion. T-vent and V^′O_2max were measured using an open circuit breath by breath gas analyzer. The sEMG was recorded from the vastus lateralis muscle with an adhesive 4-electrodes array, and the MFCV was computed on each sEMG burst over the last 30-s of each step.The mean V^′O_2max obtained during the maximal test was 53.32 ± 2.33 ml kg^?1 min^?1, and the T-vent was reached at 80.77 ± 3.49% of V^′O_2max. In all subjects reliable measures of MFCV were obtained at every exercise intensity (cross correlation values >0.8). MFCV increased linearly with the mechanical load, reaching a maximum value of 4.28 ± 0.67 m s^?1 at an intensity corresponding to the T-vent. Thereafter, MFCV declined until maximal work intensities. This study demonstrates that MFCV can be used as non-invasive tool to infer MUs recruitment/derecruitment strategies even during dynamic exercise from low to maximal intensities.