Glycosylated α-chymotrypsin as a catalyst for kyotorphin synthesis in water-organic media

-Chymotrypsin was covalently modified with cellobiose by chemical means. After adsorption on to a porous polyamide support, both the native and the glycosylated immobilized derivatives were used to synthesize a kyotorphin derivative (N-benzoyl-l-tyrosyl-l-argininamide) in acetonitrile/water. Glycosylated chymotrypsin gave a 125% increase in product formation (750 nmol mg^–1 catalyst in 3 h) at 60% (v/v) acetonitrile/water. Maximal protective effect of this glycosylation process was at 70% (v/v) acetonitrile/water, at which concentration the half-life of the glycosylated enzyme was 20-times longer than that of the native form (52 min and 2.8 min, respectively).     

Biotechnological synthesis of Pd/Ag and Pd/Au nanoparticles for enhanced Suzuki–Miyaura cross-coupling activity

Bimetallic nanoparticle catalysts have attracted considerable attention due to their unique chemical and physical properties. The ability of metal-reducing bacteria to produce highly catalytically active monometallic nanoparticles is well known; however, the properties and catalytic activity of bimetallic nanoparticles synthesized with these organisms is not well understood. Here, we report the one-pot biosynthesis of Pd/Ag (bio-Pd/Ag) and Pd/Au (bio-Pd/Au) nanoparticles using the metal-reducing bacterium, Shewanella oneidensis, under mild conditions. Energy dispersive X-ray analyses performed using scanning transmission electron microscopy (STEM) revealed the presence of both metals (Pd/Ag or Pd/Au) in the biosynthesized nanoparticles. X-ray absorption near-edge spectroscopy (XANES) suggested a significant contribution from Pd(0) and Pd(II) in both bio-Pd/Ag and bio-Pd/Au, with Ag and Au existing predominately as their metallic forms. Extended X-ray absorption fine-structure spectroscopy (EXAFS) supported the presence of multiple Pd species in bio-Pd/Ag and bio-Pd/Au, as inferred from Pd–Pd, Pd–O and Pd–S shells. Both bio-Pd/Ag and bio-Pd/Au demonstrated greatly enhanced catalytic activity towards Suzuki–Miyaura cross-coupling compared to a monometallic Pd catalyst, with bio-Pd/Ag significantly outperforming the others. The catalysts were very versatile, tolerating a wide range of substituents. This work demonstrates a green synthesis method for novel bimetallic nanoparticles that display significantly enhanced catalytic activity compared to their monometallic counterparts.     

N-Heterocyclic Carbene-Palladium Polymers Network: Recyclable Pre-catalyst for Effective Suzuki–Miyaura Coupling Reaction in Water

Rational design of high-efficiency N-heterocyclic carbene (NHC) palladium catalyst is of great importance to modern organic synthesis, especially in chemical and pharmaceutical industries. Herein, we fabricate a polymer network containing N-heterocyclic carbene palladium (PNNHC-Pd) catalytic active sites via an immobilization process. The N-heterocyclic carbene palladium can serve as a promising linkage of polymer network as well as an effective catalytic active site owing to its structural preference and strong σ-donating ability with palladium species. The results display that N-heterocyclic carbene palladium disperses homogeneously in polymer network, thus rendering PNNHC-Pd excellent catalytic activity, high stability and superior reusability in palladium-catalyzed Suzuki–Miyaura coupling reaction in aqueous medium. This work provides a new insight into the development of heterogenization of homogeneous catalysts based on polymer network.     

Synthesis of (R)- or (S)-valinol using ω-transaminases in aqueous and organic media

Valinol is part of numerous pharmaceuticals and has various other important applications. Optically pure valinol (ee >99%) was prepared employing different ω-transaminases from the corresponding prochiral hydroxy ketone. By the choice of the enzyme the (R)- as well as the (S)-enantiomer were accessible. Reductive amination was performed in organic solvent (MTBE) using 2-propyl amine as amine donor whereas alanine was applied in or in aqueous medium. Transformations in phosphate buffer were successfully performed even at 200 mM substrate concentration (20.4 g/L) leading to 99% (R) and 94% (S) conversion with perfect optical purity (>99% ee).     

1,8-Naphthalimide–Cu(ІІ) ensemble based turn-on fluorescent probe for the detection of thiols in organic aqueous media

A 1,8-naphthalimide–Cu(II) ensemble was rationally designed and synthesized as a new turn-on fluorescent probe utilizing the ‘chemosensing ensemble’ method for detections of thiols (Cys, Hcy and GSH) with high selectivity over other α-amino acids at pH 7.4 in organic aqueous media (EtOH/HEPES, v/v = 9:1). The recognition mechanism was attributed to the remove Cu(II) from the 1,8-naphthalimide–Cu(II) ensemble by thiols and the release of flurescence of ligand 1. Remarkable fluorescence enhancements were therefore observed in the sensing process of thiols by the 1,8-naphthalimide–Cu(II) ensemble. Furthermore, the 1,8-naphthalimide–Cu(II) ensemble was successfully applied to the fluorescence imaging of thiols in CHO cells with high sensitivity and selectivity.     

Novel TNF-α converting enzyme (TACE) inhibitors as potential treatment for inflammatory diseases

Our research on hydantoin based TNF-α converting enzyme (TACE) inhibitors has led to an acetylene containing series that demonstrates sub-nanomolar potency (K(i)) as well as excellent activity in human whole blood. These studies led to the discovery of highly potent TACE inhibitors with good DMPK profiles.     

Ribonucleic acid–deoxyribonucleic acid hybridization as a second-order reaction (Short Communication)

Certain features of RNA-DNA hybridization can be accounted for in terms of second-order-reaction theory. These include the use of annealing kinetics to estimate RNA complexity and the occurrence of approximately linear double-reciprocal plots.     

Speciation of dimethyltin(IV) – and trimethyltin(IV) – carbocysteinate and – glutamate systems in aqueous media

Abstract

The formation of complex species in the dimethyltin(IV) and trimethyltin(IV)-carboxymethyl-L-cysteinate (carbocysteinate) systems in NaCl_aq, at different ionic strengths, and in a multicomponent Na⁺, K⁺, Ca²⁺ ,Mg²⁺, Cl^? and SO₄^2-? medium representative of the seawater major composition, is discussed. Experimental results give evidence for the formation of the following species (L = carbocysteinate): [(CH₃)₂Sn(L)]⁰, [(CH₃)₂Sn(HL)]⁺, [(CH₃)₂Sn(OH)(L)]^?, [(CH₃)₂Sn(OH)₂(L)]^2? in the DMT–CCYS system, and [(CH₃)₃Sn(HL)]⁰, [(CH₃)₃Sn(L)]^? and [(CH₃)₃Sn(OH)(L)]^2? in the TMT-CCYS system. The ionic strength dependence of formation constants was taken into account by an extended Debye Hückel type equation and by the SIT (Specific ion Interaction Theory). Measurements were carried out also on the dimethyltin(IV)-glutamate and trimethyltin(IV)-glutamate systems in NaCl_aq, owing the strict similarity of glutamate and carbocysteinate. Results obtained show the formation of complex species having the same stoichiometry as those formed in the DMT- and TMT-carbocysteinate systems, with very similar stability, confirming that carbocysteinate behaves as a dicarboxylic amino acid without involving the sulfur-bridge potential binding site in metal coordination.     

Carboxymethyl chitosan-poly(amidoamine) dendrimer core–shell nanoparticles for intracellular lysozyme delivery

Intracellular delivery of native, active proteins is challenging due to the fragility of most proteins. Herein, a novel polymer/protein polyion complex (PIC) nanoparticle with core–shell structure was prepared. Carboxymethyl chitosan-grafted-terminal carboxyl group-poly(amidoamine) (CM-chitosan-PAMAM) dendrimers were synthesized by amidation and saponification reactions. ¹H NMR was used to characterize CM-chitosan-PAMAM dendrimers. The TEM images and results of lysozyme loading efficiency indicated that CM-chitosan-PAMAM dendrimers could self-assemble into core–shell nanoparticles, and lysozyme was efficiently encapsulated inside the core of CM-chitosan-PAMAM dendrimer nanoparticles. Activity of lysozyme was completely inhibited by CM-chitosan-PAMAM Dendrimers at physiological pH, whereas it was released into the medium and exhibited a significant enzymatic activity in an acidic intracellular environment. Moreover, the CM-chitosan-PAMAM dendrimer nanoparticles did not exhibit significant cytotoxicity in the range of concentrations below 3.16 mg/ml. The results indicated that these CM-chitosan-PAMAM dendrimers have excellent properties as highly potent and non-toxic intracellular protein carriers, which would create opportunities for novel applications in protein delivery.     

The breakage–fusion–bridge (BFB) cycle as a mechanism for generating genetic heterogeneity in osteosarcoma

Osteosarcoma (OS) is characterized by chromosomal instability and high copy number gene amplification. The breakage–fusion–bridge (BFB) cycle is a well-established mechanism of genome instability in tumors and in vitro models used to study the origins of complex chromosomal rearrangements and cancer genome amplification. To determine whether the BFB cycle could be increasing the de novo rate of formation of cytogenetic aberrations in OS, the frequency of anaphase bridge configurations and dicentric chromosomes in four OS cell lines was quantified. An increased level of anaphase bridges and dicentrics was observed in all the OS cell lines. There was also a strong association between the frequencies of anaphase bridges, dicentrics, centrosomal anomalies, and multipolar mitotic figures in all the OS cell lines, indicating a possible link in the mechanisms that led to the structural and numerical instabilities observed in OS. In summary, this study has provided strong support for the role of the BFB cycle in generating the extensive structural chromosome aberrations, as well as cell-to-cell cytogenetic variation observed in OS, thus conferring the genetic diversity for OS tumor progression.     

Synthesis of γ-cyclodextrin/chitosan composites for the efficient removal of Cd(II) from aqueous solution

The synthesis of chitosan-graft-γ-cyclodextrin (Ch-g-γ-CD) using persulfate/ascorbic acid redox system was done and characterized by FTIR, XRD, TGA and SEM/EDX. The optimum yield of the copolymer was obtained using 16 × 10⁻³ M γ-cyclodextrins (γ-CD), 2.8 × 10⁻² M ascorbic acid (AA), 1.8 × 10⁻² M K₂S₂O₈ and 0.1 g chitosan in 25 mL of 2% aqueous formic acid at 45 ± 0.2 °C. The highest percent grafting samples were evaluated for cadmium metal ion (Cd(II)) removal from the aqueous solutions where the sorption capacities were found proportional to the grafting extent. The sorption was pH and concentration dependent where, pH = 8.5 was found to be the optimum value. The adsorption data were modeled using Langmuir and Freundlich isotherms. The equilibrium data followed the Langmuir isotherm model with maximum sorption capacity of 833.33 mg/g. The influence of electrolytes, sodium chloride (NaCl) and sodium sulphate (Na₂SO₄) on Cd(II) uptake was also studied. Desorption of the cadmium loaded Ch-g-γ-CD was accomplished with 0.01 N H₂SO₄. The adsorbent exhibited high reusability and could be successfully recycled for nine cycles where in the ninth cycle 27% adsorption was feasible.     

Fe(III)–resorcylate as a spectrophotometric probe for phospholipid–cation interactions

A simple spectrophotometric microplate assay that allows quantification of the interaction between phospholipids and metal ions or other small cationic compounds has been developed. The assay is based on the competition of the phospholipids for the Fe³⁺ ion in the purple-colored Fe(III)–γ-resorcylate complex and for other cations. To compare the binding affinities of several cation–phospholipid interactions, K_0.5 values were derived from binding curves constructed by determination of the absorbance of the Fe(III)–γ-resorcylate at 490 nm as a function of the cation concentration. The assay was used to analyze the binding of lanthanide ions, calcium ions, and amines (hydrochlorides of ethanolamine, spermidine, and hexyltrimethylammonium chloride) to small unilamellar vesicles (SUVs) and mixed micelles containing anionic lipids such as phosphatidic acid and phosphatidyl-p-nitrophenol. The method was evaluated by fluorescence measurements with Eu³⁺ ions as tracer. Lanthanide ions such as La³⁺ and Ce³⁺ ions showed K_0.5 values smaller by one to two orders of magnitude compared with Ca²⁺ ions. In the presence of increasing amounts of detergents such as Triton X-100, the method also reflected transitions from SUVs to micelles. The binding capacity for metal ions was higher for phospholipid-containing micelles than for the corresponding SUVs.     

Kinetics of the oxidation of bromide ions by bis(2,2′-bipyridine)manganese(III) ions in aqueous perchlorate media

The kinetics of the oxidation of bromide ions by the bis(2,2′-bipyridine)manganese(III) ion have been investigated over a range of acid concentrations for several temperatures. Initial rates of reaction are measured and from their variation with [Mn^III] and [Br−] it is concluded that the observed order in [Mn(bipy)₂³⁺_aq] is one and that in [Br⁻] is intermediate between zero and one. It is shown kinetically that intermediate complexes between Mn^III and Br⁻ ions are involved and from the variation of the rate constant with acidity it is concluded that the decomposition of Mn(bipy)₂Br²⁺_aq is definitely involved as a rate controlling step and that the decomposition of the protonated complex Mn(bipy)(bipyH⁺)Br³⁺_aq is also probably involved as a rate controlling step. The kinetics and mechanism for this oxidation are compared with those found for other cations complexed with bipyridine, for aqua-cations and other complexes of Co^III.     

Succinic acid amides as P2–P3 replacements for inhibitors of interleukin-1β converting enzyme (ICE or caspase 1)

Succinic acid amides have been found to be effective P2–P3 scaffold replacements for peptidic ICE inhibitors. Heteroarylalkyl fragments occupying the P4 position provided access to compounds with nM affinities. Utilization of an acylal prodrug moiety was required to overcome biopharmaceutical issues which led to the identification of 17f, a potential clinical candidate.     

Avidin–biotin capped mesoporous silica nanoparticles as an ion-responsive release system to determine lead(II)

We have developed DNAzyme-functionalized silica nanoparticles for the rapid, sensitive, and selective detection of lead ion (Pb²⁺). The specific binding between avidin and biotinylated DNAzymes was used to cap the pore of dye-trapped silica nanoparticles. In the presence of Pb²⁺, DNAzymes were catalytically cleaved to uncap the pore, releasing the dye cargo with detectable enhancements of fluorescence signal. This method enables rapid (15 min) and sensitive (limit of detection = 8.0 nM) detection. Moreover, the Pb²⁺-responsive behavior shows high selectivity with other metal ions. The superior properties of the as-designed DNAzyme-functionalized silica nanoparticles can be attributed to the large loading capacity and highly ordered pore structure of mesoporous silica nanoparticles as well as the catalytical cleaving of DNAzymes with Pb²⁺. The recoveries obtained by standard Pb(II) addition to real samples—tap water, commercial mineral water, and lake water—were all from 98 to 101%. Our design serves as a new prototype for metal–ion sensing systems, and it also has promising potential for detection of various targets in stimulus–release systems.     

The green fluorescent protein as an efficient selection marker for Agrobacterium tumefaciens-mediated transformation in Hevea brasiliensis (Müll. Arg)

An efficient genetic transformation procedure using a recombinant green fluorescent protein (GFP) has been developed in Hevea brasiliensis clone PB260. Transformation experiments have been performed using an Agrobacterium tumefaciens binary vector harbouring both uidA and S65T-GFP reporter genes in order to compare selection methods using glucuronidase assay (GUS activity) and paromomycin resistance, GFP activity and paromomycin resistance, or GFP activity only. At transient level, the number of spots showing GUS or GFP activities was similar for 4 and 5 days after coculture. After selection, stable transformation events were observed and led to the establishment of transgenic callus lines. A higher number of lines were generated with GFP selection compared to the GUS one. GFP selection is less time-consuming in terms of callus subculturing, and offers the possibility of producing antibiotic resistance marker-free transgenic plants.     

A zinc (II) complex comprising an aminoethyl-nitropyridine-derived N,N,O-donor Schiff base ligand serves as an efficient ON–OFF probe for Cu(II)

A new fluorescent zinc (II) complex-based probe 1 encompassing a Schiff's base (E)-2-methoxy-6-((2-[5-nitropyridin-2-ylamino]ethylimino)methyl)phenol ( HL ) was designed, synthesized, and used for the highly selective detection of Cu²⁺. Ligand HL and complex 1 were characterized using various spectroscopic techniques such as ¹H, ¹³C-NMR, and FTIR spectroscopy, high-resolution mass spectronomy (HRMS), UV/visible light spectroscopy, and fluorescence studies. Ligand HL did not exhibit any considerable change in fluorescence in the presence of various cations. Notably, its Zn(II) complex 1 exhibited highly selective ‘TURN-OFF’ fluorescence signalling towards Cu²⁺ that remained uninterrupted with competing analytes. Probe 1 interacted with Cu²⁺ in 1:2 (1:Cu²⁺) stoichiometry as estimated through a Job's plot. Moreover, the selectivity of 1 was further confirmed through the interaction of the 1 + Cu²⁺ complex with some possible interfering metal ions inducing an insignificant response. Additionally, the association and quenching constant were determined to be 3.30 × 10⁴ M⁻¹ and 0.21 × 10⁵ M⁻¹ through the Benesi–Hildebrand method and Stern–Volmer plot, respectively.     

Anticancer effects against colorectal cancer models of chloro(triethylphosphine)gold(I) encapsulated in PLGA–PEG nanoparticles

Chloro(triethylphosphine)gold(I), (Et₃PAuCl hereafter), is an Auranofin (AF)-related compound showing very similar biological and pharmacological properties. Like AF, Et₃PAuCl exhibits potent antiproliferative properties in vitro toward a variety of cancer cell lines and is a promising anticancer drug candidate. We wondered whether Et₃PAuCl encapsulation might lead to an improved pharmacological profile also considering the likely reduction of unwanted side-reactions that are responsible for adverse effects and for drug inactivation. Et₃PAuCl was encapsulated in biocompatible PLGA–PEG nanoparticles (NPs) and the new formulation evaluated in colorectal HCT-116 cancer cells in comparison to the free gold complex. Notably, encapsulated Et₃PAuCl (nano-Et₃PAuCl hereafter) mostly retains the cellular properties of the free gold complex and elicits even greater cytotoxic effects in colorectal cancer (CRC) cells, mediated by apoptosis and autophagy. Moreover, a remarkable inhibition of two crucial signaling pathways, i.e. ERK and AKT, by nano-Et₃PAuCl, was clearly documented. The implications of these findings are discussed.

     

A dual functional turn off florescence sensor using metal–organic framework for sensitive detection of aluminum(III) in aqueous solution

Aluminum, classified as one of the toxic heavy metals, has a recommended daily consumption limit of 3–10 mg, as specified by the World Health Organization (WHO). Herein, the selective and sensitive aluminum(III) fluorescence sensor based on TMU-16 metal–organic frameworks (MOFs) in aqueous medium, is reported. A sensing pathway was found via the cation exchange between aluminum(III) and zinc(II) ions, and caused selectivity and sensitivity detection of aluminum(III) with a 5–100 ppm linear range and 1.99 ppm limit of detection (LOD). This sensor offers the advantage of accurately determining the concentration range of aluminum(III) ions. At low concentrations, only fluorescence quenching was observed, while at higher concentrations, fluorescence emission not only undergoes quenching but also exhibits a blue shift in wavelength. Notably, the sensor demonstrates no interference from cation solutions of mercury(II), zinc(II), nickel(II), lead(II), cobalt(II), cadmium(II), silver(I), chromium(III), and iron(III). Another significant feature of this sensor is its selectivity toward copper(II) and aluminum(III) ions, due to quenching fluorescence in the presence of copper(II) ion. The results presented the sensor's selectivity toward copper(II) at low concentrations and aluminum(III) at high concentrations.