Rapid ethanol production at elevated temperatures by engineered thermotolerant Kluyveromyces marxianus via the NADP(H)-preferring xylose reductase-xylitol dehydrogenase pathway

Conversion of xylose to ethanol by yeasts is a challenge because of the redox imbalances under oxygen-limited conditions. The thermotolerant yeast Kluyveromyces marxianus grows well with xylose as a carbon source at elevated temperatures, but its xylose fermentation ability is weak. In this study, a combination of the NADPH-preferring xylose reductase (XR) from Neurospora crassa and the NADP⁺-preferring xylitol dehydrogenase (XDH) mutant from Scheffersomyces stipitis (Pichia stipitis) was constructed. The xylose fermentation ability and redox balance of the recombinant strains were improved significantly by over-expression of several downstream genes. The intracellular concentrations of coenzymes and the reduced coenzyme/oxidized coenzyme ratio increased significantly in these metabolic strains. The byproducts, such as glycerol and acetic acid, were significantly reduced by the disruption of glycerol-3-phosphate dehydrogenase (GPD1). The resulting engineered K. marxianus YZJ088 strain produced 44.95 g/L ethanol from 118.39 g/L xylose with a productivity of 2.49 g/L/h at 42 °C. Additionally, YZJ088 realized glucose and xylose co-fermentation and produced 51.43 g/L ethanol from a mixture of 103.97 g/L xylose and 40.96 g/L glucose with a productivity of 2.14 g/L/h at 42 °C. These promising results validate the YZJ088 strain as an excellent producer of ethanol from xylose through the synthetic xylose assimilation pathway.     

Engineering the activity of thermophilic xylose isomerase by site-directed mutation at subunit interfaces

Some of the conserved residues at subunit interfaces of thermophilic xylose isomerases (XIs) were selected by means of both multiple sequences alignment and subunit interactions analysis of XIs, and then were mutated for improving the activity of Thermus thermophilus xylose isomerase (TtXI). By site-directed mutagenesis, single (D375G, K355A, V144A) and double (D375G/V385A) mutations were introduced into TtXI containing a N91D mutation site, namely, TtXI-N91D. It was shown that the specific activities of mutants D375G, K355A and V144A were remarkably increased over a temperature range of 40–90 °C at pH 7.0. The activities of mutants D375G/V385A, D375G, V144A and K355A were 1.14-, 1.62-, 2.49- and 3.02-fold greater than that of TtXI-N91D at 75 °C, respectively. Over the pH range of 5.0–9.0, the activities of mutants D375G, K355A and V144A were greater than that of TtXI-N91D at 60 °C. The thermostability of all mutants, except K355A, was lower than that of TtXI-N91D. The results suggest that the activity of TtXI could be engineered by site-directed mutagenesis on the conserved residues at subunit interfaces. This method could be employed for improving the activity of other thermophilic XIs.     

Two-step acid and alkaline ethanolysis/alkaline peroxide fractionation of sugarcane bagasse and rice straw for production of polylactic acid precursor

Sugarcane bagasse and rice straw were subjected to acid and alkaline ethanolysis and sequential enzymatic hydrolysis to produce glucose for lactic acid production. Influence of physico-chemical treatments using ultrasonic bath and ultrasonic probe was studied compared with mechanical stirring. The results showed that the highest glucose yield with least contamination of xylose was obtained from acid ethanolysis fractionation (5 N H₂SO₄ + 50%, v/v ethanol) when stirred at 90 °C for 4 h. Alkaline ethanolysis accomplished high amount of both glucose and xylose released, however it was not favorable substrate for homofermentative lactic acid bacteria. In order to enhance enzymatic hydrolysis of acid ethanolysis fractionated samples, lignin was subsequently removed by the second step alkaline/peroxide delignification. The maximum lactic acid was obtained at 23.6 ± 0.2 g/L from Lactobacillus casei fermentation after 72 h when hydrolysate from two-step acid hydrolysis and alkaline/peroxide fractionated sugarcane bagasse containing 24.6 g/L initial glucose concentration was used as substrate.     

2,3-Butanediol production using Klebsiella oxytoca ATCC 8724: Evaluation of biomass derived sugars and fed-batch fermentation process

For this study, 2,3-butanediol (BD) fermentation from pure and biomass-derived sugar were optimized in shake-flask and 5-L bioreactor levels using Klebsiella oxytoca ATCC 8724. The results showed that 70 g/L of single sugar (glucose or xylose) and 90 g/L of mixed-sugar (glucose:xylose = 2:1) were optimum concentrations for efficient 2,3-BD fermentation. At optimum sugar concentrations, 2,3-BD productivities were 1.03, 0.64 and 0.50 gL⁻¹ h⁻¹, and yields were 0.43, 0.36 and 0.35 g/g in glucose, xylose and mixed-sugar medium, respectively. The lack of simultaneous utilization of glucose and xylose led to the lowest productivity in the mixed-sugar medium. Detoxification of biomass hydrolyzates was necessary for efficient 2,3-BD fermentation when sugar concentrations in the medium was 90 g/L or higher, but not with sugar concentrations of 30 g/L or less. A fed-batch fermentation using glucose medium led to an increase 2,3-BD titer to 79.4 g/L and yields 0.47 g/g, while productivity decreased to 0.79 gL⁻¹ h⁻¹. However, the fed-batch process was inefficient using mixed-sugar and biomass hydrolyzates because of poor xylose utilization. These results indicated that appropriate biomass processing technologies must be developed to generate separate glucose and xylose streams to produce high 2,3-BD titer from biomass-derived sugar using a fed-batch process.     

Metabolic engineering of Clostridium tyrobutyricum for enhanced butyric acid production from glucose and xylose

Clostridium tyrobutyricum is a promising microorganism for butyric acid production. However, its ability to utilize xylose, the second most abundant sugar found in lignocellulosic biomass, is severely impaired by glucose-mediated carbon catabolite repression (CCR). In this study, CCR in C. tyrobutyricum was eliminated by overexpressing three heterologous xylose catabolism genes (xylT, xylA and xlyB) cloned from C. acetobutylicum. Compared to the parental strain, the engineered strain Ct-pTBA produced more butyric acid (37.8 g/L vs. 19.4 g/L) from glucose and xylose simultaneously, at a higher xylose utilization rate (1.28 g/L·h vs. 0.16 g/L·h) and efficiency (94.3% vs. 13.8%), resulting in a higher butyrate productivity (0.53 g/L·h vs. 0.26 g/L·h) and yield (0.32 g/g vs. 0.28 g/g). When the initial total sugar concentration was ~120 g/L, both glucose and xylose utilization rates increased with increasing their respective concentration or ratio in the co-substrates but the total sugar utilization rate remained almost unchanged in the fermentation at pH 6.0. Decreasing the pH to 5.0 significantly decreased sugar utilization rates and butyrate productivity, but the effect was more pronounced for xylose than glucose. The addition of benzyl viologen (BV) as an artificial electron carrier facilitated the re-assimilation of acetate and increased butyrate production to a final titer of 46.4 g/L, yield of 0.43 g/g sugar consumed, productivity of 0.87 g/L·h, and acid purity of 98.3% in free-cell batch fermentation, which were the highest ever reported for butyric acid fermentation. The engineered strain with BV addition thus can provide an economical process for butyric acid production from lignocellulosic biomass.     

Production of ciguatoxin and maitotoxin by strains of Gambierdiscus australes,G. pacificus and G. polynesiensis (Dinophyceae) isolated from Rarotonga,Cook Islands

The isolation and culturing of toxic Gambierdiscus species is desirable for obtaining reliable sources of toxins responsible for Ciguatera Fish Poisoning (CFP) in order to provide reference materials and purified standards for chemical analyses and bioassays. Gambierdiscus polynesiensis CAWD212, G. pacificus CAWD213 and G. australes CAWD149 and 216 have been isolated from samples of sea water from the Cook Islands. G. polynesiensis produced ciguatoxins (CTX; 18.2 pg per cell) and G. australes CAWD149 produced maitotoxin (MTX; 8.3 pg per cell) and in both extracts putative MTX-3 was detected. G. pacificus also produced putative MTX-3. The toxicities of extracts of G. polynesiensis and G. pacificus were similar by i.p. injection (LD_50s of 1.0 mg/kg and 0.8 mg/kg respectively), but when administered by gavage, the MTX-3 analogue producing G. pacificus (LD₅₀ 251 mg/kg) was 30-times less toxic than the CTX-producing G. polynesiensis (LD₅₀ 7.9 mg/kg). Consumption of fish contaminated by CFP has caused illness and even death in the Cook Islands and throughout the Pacific region and is now considered a globally neglected disease. Large-scale cultures of these organisms are now available, and isolation of the toxins they produce is in progress.     

Efficiencies of designed enzyme combinations in releasing arabinose and xylose from wheat arabinoxylan in an industrial ethanol fermentation residue

The generation of a fermentable hydrolysate from arabinoxylan is an important prerequisite for utilization of wheat hemicellulose in production of ethanol or other value added products. This study examined the individual and combined efficiencies of four selected, commercial, multicomponent enzyme preparations Celluclast 1.5 L (from Trichoderma reesei), Finizym (from Aspergillus niger), Ultraflo L (from Humicola insolens), and Viscozyme L (from Aspergillus aculeatus) in catalyzing arabinose and xylose release from water-soluble wheat arabinoxylan in an industrial fermentation residue (still bottoms) in lab scale experiments. Different reaction conditions, i.e. enzyme dosage, reaction time, pH, and temperature, were evaluated in response surface and ternary mixture designs. Ultraflo L treatment gave optimal arabinose release: treatment (6 h, 60 °C, pH 6) with this enzyme preparation liberated up to 46% by weight (wt.%) of the theoretically maximal arabinose yield from the substrate. Celluclast 1.5 L was superior to the other enzyme preparations in releasing xylose and catalyzed release of up to 25 wt.% of the theoretical maximum xylose yield (6 h, 60 °C, pH 4). Prolonged treatment for 24 h with a 50:50 mixture of Celluclast 1.5 L and Ultraflo L at 50 °C, pH 5 exhibited a synergistic effect in xylose release and 62 wt.% of the theoretically maximal xylose yield was achieved. Addition of pure β-xylosidase from T. reesei to the Ultraflo L preparation released the same amounts of xylose from the substrate as the 50:50 mixture of Celluclast 1.5 L and Ultraflo L. The data thus signified that the synergistic effect in xylose release between Celluclast 1.5 L and Ultraflo L is the result of a three-step interaction mechanism involving α-l-arabinofuranosidase and different xylan degrading enzyme activities in the two enzyme preparations.     

Synthesis of novel fenfuram-diarylether hybrids as potent succinate dehydrogenase inhibitors

Twelve novel fenfuram-diarylether hybrids were designed, synthesized and characterized by ¹H NMR and MS. Their in vitro antifungal activities were evaluated against five phytopathogenic fungi by mycelial growth inhibition method. Most compounds showed significant antifungal effect on Rhizoctonia solani and Sclerotinia sclerotiorum. Compound 1c exhibited the most potent antifungal effect on R. solani with an EC₅₀ value of 0.242 mg/L, superior to the commercial fungicide boscalid (EC₅₀ = 1.758 mg/L) and the lead fungicide fenfuram (EC₅₀ = 7.691 mg/L). Molecular docking revealed that compound 1c featured a higher affinity for succinate dehydrogenase (SDH) than fenfuram. Furthermore, it was shown that the 2-chlorophenyl group of compound 1c formed a π-π stacking with D/Tyr-128 and a Cl-π interaction with B/His-249, which made compound 1c more active than fenfuram against SDH.     

Cloning,expression, and characterization of a thermostable β-xylosidase from thermoacidophilic Alicyclobacillus sp. A4

A β-xylosidase gene (xylA4) was identified in the genome sequence of thermoacidophilic Alicyclobacillus sp. A4. The deduced amino acid sequence was highly homologous with the β-xylosidases of family 52 of the glycoside hydrolases (GH). The full-length gene consisted of 2097 bp and encoded 698 amino acids without a signal peptide. The gene product was successfully expressed in Escherichia coli with an activity of 564.9 U/mL. Recombinant XylA4 was purified by Ni²⁺-NTA affinity chromatography with a molecular mass of 78.5 kDa. The enzyme showed optimal activity at pH 6.0 and 65 °C, and remained stable over the pH range of 5.0–9.0. The thermostability of XylA4 is noteworthy, retaining almost all of the activity after 1 h incubation at 65 °C. Using p-nitrophenyl-β-d-xylopyranoside (pNPX) as the substrate, XylA4 had the highest specific activity (261.1 U/mg) and catalytic efficiency (601.5/mM/s) known so far for GH52 xylosidases. The enzyme displayed high tolerance to xylose, with a K_i value of approximately 88.7 mM. It also had synergy with xylanase XynBE18 from Paenibacillus sp. E18 in xylan degradation, releasing more xylose (up to 1.43 folds) than XynBE18 alone. Therefore, this thermostable xylose-tolerant β-xylosidase may have a great application potential in many industrial fields.     

Kinetics of cellulose hydrolysis by halostable cellulase from a marine Aspergillus niger at different salinities

Kinetics of cellulose hydrolysis with halostable cellulase from a marine Aspergillus niger was analyzed at different salinities. Cellulase activity in 8% NaCl solution was 1.43 folds higher than that in NaCl free solution. Half saturation constant, K_m (15.6260 g/L) and the rate constant of deactivation, K_de (0.3369 g/L h) in 8% NaCl solution was lower than that (18.6364 g/L), 0.3754 (g/L h) in NaCl free solution. The maximum initial hydrolysis velocity, V_max (25.5295 g/L h), in 8% NaCl solution was higher than that in NaCl free solution (25.0153 g/L h). High salinity increased affinity to the cellulase to the substrate and thermostability. Halostable cellulase from a marine Aspergillus niger was valuable for cellulose hydrolysis under high salinity conditions.     

Salicylanilide diethyl phosphates: Synthesis,antimicrobial activity and cytotoxicity

A series of 27 salicylanilide diethyl phosphates was prepared as a part of our on-going search for new antimicrobial active drugs. All compounds exhibited in vitro activity against Mycobacterium tuberculosis, Mycobacterium kansasii and Mycobacterium avium strains, with minimum inhibitory concentration (MIC) values of 0.5–62.5 μmol/L. Selected salicylanilide diethyl phosphates also inhibit multidrug-resistant tuberculous strains at the concentration of 1 μmol/L. Salicylanilide diethyl phosphates also exhibited mostly the activity against Gram-positive bacteria (MICs ⩾1.95 μmol/L), whereas their antifungal activity is significantly lower. The IC₅₀ values for Hep G2 cells were within the range of 1.56–33.82 μmol/L, but there is no direct correlation with MICs for mycobacteria.     

Nitrate removal in surface-flow constructed wetlands treating dilute agricultural runoff in the lower Yakima Basin,Washington

Constructed treatment wetlands (CTWs) have been used effectively to treat a range of wastewaters and non-point sources contaminated with nitrogen (N). But documented long-term case studies of CTWs treating dilute nitrate-dominated agricultural runoff are limited. This study presents an analysis of four years of water quality data for a 1.6-ha surface-flow CTW treating irrigation return flows in Yakima Basin in central Washington. The CTW consisted of a sedimentation basin followed by two surface-flow wetlands in parallel, each with three cells. Inflow typically contained 1–3 mg-N/L nitrate and <0.4 mg-N/L total Kjeldahl N (TKN). Hydraulic loading was fairly constant, ranging from around 125 cm/d in the sedimentation basin to 12 cm/d in the treatment wetlands. Concentration removal efficiencies for nitrate averaged 34% in the sedimentation basin and 90–93% in the treatment wetlands. Total N removal efficiencies averaged 21% and 57–63% in the sedimentation basin and treatment wetlands, respectively. Area-based first-order removal rate constants for nitrate in the wetlands averaged 142–149 m/yr. Areal removal rates for nitrate in treatment wetlands averaged 139–146 mg-N/m²/d. Outflow from the CTW typically contained <0.1 mg-N/L nitrate and <0.6 mg-N/L TKN. Rates of nitrate loss in wetlands were highly seasonal, generally peaking in the summer months (June–August). Nitrate loss rates also correlated significantly with water temperature (positively) and dissolved oxygen (negatively). Based on the modified Arrhenius relationship, θ for nitrate loss in the wetlands was 1.05–1.09. The CTW also significantly affected temperature and dissolved oxygen concentration in waters flowing through the system. On average, the sedimentation basin caused an increase in temperature (+1.7 °C) and dissolved oxygen (+1.5 mg/L); in contrast the wetlands caused a decrease in temperature (?1.6 °C) and dissolved oxygen (?5.0 mg/L). Results show that CTWs with surface-flow wetlands can be extremely effective at polishing dilute non-point sources, particularly in semi-arid environments where warm temperatures and low oxygen levels in treatment wetland water promote biological denitrification.     

Sulfate reduction from phosphogypsum using a mixed culture of sulfate-reducing bacteria

Phosphogypsum (CaSO₄), a primary by-product of phosphoric acid production, is accumulated in large stockpiles and occupies vast areas of land. It poses a severe threat to the quality of water and land in countries producing phosphoric acid. In this study, the potential of sulfate-reducing bacteria for biodegradation of this sulfur-rich industrial solid waste was assessed. The effect of phosphogypsum concentration, carbon and nitrogen sources, temperature, pH and stirring on the growth of sulfate-reducing bacteria was investigated. Growth of sulfate-reducing bacteria was monitored by measuring sulfide production. Phosphogypsum was shown to be a good source of sulfate, albeit that the addition of organic carbon was necessary for bacterial growth. Biogenic sulfide production occurred with phosphogypsum up to a concentration of 40 g L⁻¹, above which no growth of sulfate-reducing bacteria was observed. Optimal growth was obtained at 10 g L⁻¹ phosphogypsum. Both the gas mixture H₂/CO₂ and lactate supported high amounts of H₂S formation (19 and 11 mM, respectively). The best source of nitrogen for sulfate-reducing bacteria was yeast extract, followed by ammonium chloride. The presence of nitrate had an inhibitory effect on the process of sulfate reduction. Stirring the culture at 150 rpm slightly stimulated H₂S formation, probably by improving sulfate solubility.     

Effect of lignocellulose degradation products on microbial biomass and lipid production by the oleaginous yeast Cryptococcus curvatus

This work investigated effects of lignocellulose degradation products on cell biomass and lipid production by Cryptococcus curvatus. Furfural was found to have the strongest inhibitory effect. For the three phenolic compounds tested, vanillin was the most toxic, while PHB and syringaldehyde showed comparable inhibitions in the concentration range of 0–1.0 g/L. Generally little significant differences on the relative cell biomass and lipid contents at the same concentrations of tested compounds were observed between glucose and xylose as a sole carbon source. At 1.0 g/L of furfural, the cell biomass and lipid content decreased by 78.4% and 61.0% for glucose as well as 72.0% and 59.3% for xylose, respectively. C. curvatus ceased to grow at concentrations of PHB over 1.0 g/L or vanillin over 1.5 g/L. The strain could survive in the presence of syringaldehyde up to 2.0 g/L for glucose or 1.5 g/L for xylose. The compounds’ negative impact was reduced by an increase in inoculum size and a 10% (v/v) seed was detected to be optimal for cell biomass and lipid production. The results demonstrated C. curvatus could effectively utilize most of the dominant monosaccharides and cellobiose existing in lignocellulosic biomass hydrolysate in the presence of toxic compounds.     

Functional evaluation of tryptophans in glycolipid binding and membrane interaction by HET-C2, a fungal glycolipid transfer protein

HET-C2 is a fungal glycolipid transfer protein (GLTP) that uses an evolutionarily-modified GLTP-fold to achieve more focused transfer specificity for simple neutral glycosphingolipids than mammalian GLTPs. Only one of HET-C2's two Trp residues is topologically identical to the three Trp residues of mammalian GLTP. Here, we provide the first assessment of the functional roles of HET-C2 Trp residues in glycolipid binding and membrane interaction. Point mutants HET-C2^W208F, HET-C2^W208A and HET-C2^F149Y all retained > 90% activity and 80–90% intrinsic Trp fluorescence intensity; whereas HET-C2^F149A transfer activity decreased to ~ 55% but displayed ~ 120% intrinsic Trp emission intensity. Thus, neither W208 nor F149 is absolutely essential for activity and most Trp emission intensity (~ 85–90%) originates from Trp109. This conclusion was supported by HET-C2^W109Y/F149Y which displayed ~ 8% intrinsic Trp intensity and was nearly inactive. Incubation of the HET-C2 mutants with 1-palmitoyl-2-oleoyl-phosphatidylcholine vesicles containing different monoglycosylceramides or presented by lipid ethanol-injection decreased Trp fluorescence intensity and blue-shifted the Trp λ_max by differing amounts compared to wtHET-C2. With HET-C2 mutants for Trp208, the emission intensity decreases (~ 30–40%) and λ_max blue-shifts (~ 12 nm) were more dramatic than for wtHET-C2 or F149 mutants and closely resembled human GLTP. When Trp109 was mutated, the glycolipid induced changes in HET-C2 emission intensity and λ_max blue-shift were nearly nonexistent. Our findings indicate that the HET-C2 Trp λ_max blue-shift is diagnostic for glycolipid binding; whereas the emission intensity decrease reflects higher environmental polarity encountered upon nonspecific interaction with phosphocholine headgroups comprising the membrane interface and specific interaction with the hydrated glycolipid sugar.     

Control and optimization of nitrifying communities for nitritation from domestic wastewater at room temperatures

To achieve nitritation from complete-nitrification seed sludge at room temperature of 19 ± 1 °C, a lab-scale sequencing batch reactor (SBR) treating domestic wastewater with low C/N ratios was operated to investigate the control and optimization of nitrifying communities. Ammonia oxidizing bacteria (AOB) dominance was enhanced through the combination of low DO concentrations (<1.0 mg/L) and preset short-cycle control of aeration time. Nitritation was successfully established with NO₂^?-N/NO_x^?-N over 95%. To avoid the adverse impact of low DO concentrations on AOB activities, DO concentrations were increased to 1–2 mg/L. At the normal DO levels and temperatures, on-line control strategy of aerobic durations maintained the stability of nitritation with nitrite accumulation rate over 95% and ammonia removal above 97%. Fluorescence in-situ hybridization (FISH) analysis presented that the maximal percentage of AOB in biomass reached 10.9% and nitrite oxidizing bacteria (NOB) were washed out.     

Effect of antioxidant extraction on the enzymatic hydrolysis and bioethanol production of the extracted steam-exploded sugarcane bagasse

Ethyl acetate extraction (EAE) of the steam exploded sugarcane bagasse may be an effective and economic way to extract antioxidants as well as enhance the enzymatic hydrolysis and bioethanol yield from the extracted residue. Therefore, the effects of EAE on steam-exploded sugarcane bagasse (SESB) were studied. Under boiling solvent extraction (BSE), the efficiency of EAE for obtaining phenolics from SESB was approximately 20%. EA extracts obtained under BSE showed an H₂O₂ scavenging activity (210 μL) of 99%. The IC₅₀ values for 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and reducing power of BSE40 were 50.89 and 256.38 μg/mL, respectively, while those of vitamin C were 24 and 112 μg/mL, respectively. EAE improved the glucose yield by 30% but had no significant effect on the xylose yield during the enzymatic hydrolysis obtained using Celluclast 1.5L and Novozym 188. EAE also increased the ethanol yield by 8.78% by employing simultaneous saccharification and fermentation. The present study may be of great importance in industrial bioethanol production from steam-exploded biomass environmentally friendly and economically.     

Glucose and xylose stimulation of a β-glucosidase from the thermophilic fungus Humicola insolens: A kinetic and biophysical study

β-Glucosidases activated by glucose and xylose are uncommon yet intriguing enzymes that may enhance cellulose saccharification efficiency, and are of interest for application in bioethanol production processes. The molecular mechanisms of activation are completely unknown, and the aim of this study was the kinetic and biophysical characterization of the stimulation of a β-glucosidase from Humicola insolens by glucose and xylose. The effects of the monosaccharides were concentration dependent, where in a stimulatory range (0.1–50 mmol L⁻¹), the activity increased up to 2-fold; in a stimulatory-inhibitory range (50–450 mmol L⁻¹ glucose or 50–730 mmol L⁻¹ xylose), the enzyme continued to be stimulated, but the activity was lower than maximal. Above 450 mmol L⁻¹ glucose or 730 mmol L⁻¹ xylose, increasing inhibition occurred. Dynamic light scattering confirmed that the enzyme is monomeric (54 kDa) and kinetic, intrinsic tryptophan fluorescence emission and far ultraviolet circular dichroism analyses indicated that the enzyme possesses a catalytic site (CS) and a modulator binding site (MS). Glucose or xylose binding to the MS induces conformational changes that stimulate the catalytic activity at the CS. Glucose and xylose may compete with the substrate for the CS while the substrate competes with the monosaccharides for binding to the MS. The stimulation of the enzymatic activity by glucose and xylose, which compete for the same sites on the enzyme molecule, is not synergistic. These data reveal allosteric interactions between the MS and the CS in H. insolens β-glucosidase that result in fine modulation of the catalytic activity by the monosaccharides. A kinetic model was developed that accurately described the experimental data for enzyme stimulation by glucose and/or xylose. Understanding the regulatory mechanisms of the enzyme activity, with the aid of kinetic models, may be useful for the application of the enzyme in cellulose hydrolysis processes.