Pores from mitochondrial outer membranes of yeast and a porin-deficient yeast mutant: A comparison

Reconstitution experiments were performed on lipid bilayer membranes in the presence of purified mitochondrial porin from yeast and of detergent-solubilized mitochondrial outer membranes of a porin-free yeast mutant. The addition of the porin resulted in a strong increase of the membrane conductance, which was caused by the formation of ion-permeable channels in the membranes. Yeast porin has a single-channel conductance of 4.2 nS in 1 M KCl. In the open state it behaves as a general diffusion pore with an effective diameter of 1.7 nm and possesses properties similar to other mitochondrial porins. Surprisingly, the membrane conductance also increased in the presence of detergent extracts of the mitochondrial outer membrane of the mutant. Single-channel recordings of lipid bilayer membranes in the presence of small concentration of the mutant membranes suggested that this membrane also contained a pore. The reconstituted pores had a single-channel conductance of 2.0 nS in 1 M KCl and the characteristics of general diffusion pores with an estimated effective diameter of 1.2 nm. This means that the pores present in the mitochondrial outer membranes of the yeast mutant have a much smaller effective diameter than normal mitochondrial porins. Zero-current membrane potential measurements suggested that the second mitochondrial porin is slightly cation-selective, while yeast porin is slightly anion-selective in the open state but highly cation-selective in the closed state. The possible role of these pores in the metabolism of mitochondria is discussed.     

Characterisation of channels induced in planar bilayer membranes by detergent solubilised Escherichia coli porins

Purified OmpF, OmpC, NmpC, PhoE and Lc (Protein 2) porins from the Escherichia coli outer membrane were incorporated into planar phospholipid bilayer membranes and the permeability properties of the pores studied. Triton X-100 solubilised porin samples showed large and reproducible increases in membrane conductivity composed of discreet single-channel events. The magnitude of the cation selectivity found for the porins was in the order OmpC greater than OmpF greater than NmpC = Lc; PhoE was anion selective. For the cation selective porins the cation/anion permeability ratios in a variety of solutes ranged from 6 to 35. Further information on the internal structure of the porins was obtained by examination of the single-channel conductance and this was used to interpret macroscopic observations and to estimate single-channel diameters. The same porins solubilised in SDS exhibited slight conductance increase with no observable single-channel activity. Use of on-line microcomputer techniques confirmed the ohmic current vs. voltage behaviour for all the single porin channels examined.     

Identification of a new pore in the mitochondrial outer membrane of a porin-deficient yeast mutant

Reconstitution experiments were performed on lipid bilayer membranes in the presence of detergent-solubilized mitochondrial outer membranes of a porin-free yeast mutant and of its parent strain. The addition of the detergent-solubilized material resulted in a strong increase in the membrane conductance which was not observed if only the detergent was added to the aqueous phase. Surprisingly, the membrane conductance induced by the detergent extracts of the mutant membrane was only a factor of 20 less than that caused by the outer membrane of the parent strain under otherwise identical conditions. Single-channel recordings of lipid bilayer membranes in the presence of mitochondrial outer membranes of the yeast mutant suggested the presence of a transient pore. The reconstituted pores had a single-channel conductance of 0.21 nS in 0.1 M KCl and the characteristics of general diffusion pores with an estimated effective diameter of 1.2 nm. The pores present in the mitochondrial outer membranes of the yeast mutant shared some similarities with the pores formed by mitochondrial and bacterial porins although their effective diameter is much smaller than those of the 'normal' mitochondrial porins which have a single-channel conductance of about 0.4 nS in 0.1 M KCl, corresponding to an effective diameter of 1.7 nm. Zero-current membrane-potential measurements suggested that the second mitochondrial porin is slightly cation-selective. Its possible role in the metabolism of mitochondria is discussed.     

Receptor for bacteriophage lambda of Escherichia coli forms larger pores in black lipid membranes than the matrix protein (porin).

The receptor for phage lambda in Escherichia coli was isolated by cholate extraction and purified by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Protein bands corresponding to the monomer and the dimer were eluted from the gel and tested for their activity to inactivate phage lambda and to form pores in black lipid membranes. It was found that only the dimer inactivated phage lambda, whereas both the monomer and the dimer were active in forming pores. The pore characteristics were similar to those exhibited by the matrix protein (porin) (R. Benz, K. Janko, W. Boos, and P. L?uger, Biochim. Biophys. Acta 511:305--319, 1978). In comparison, the lambda receptor showed a somewhat higher degree of cation specificity, and its pore size was larger. Assuming that the thickness of the outer membrane is 7.5 nm and that the pore is an ideal hydrophilic channel, the pore diameter in vivo was estimated to be 1.6 nm for the lambda receptor and 1.2 nm for the matrix protein.     

Crystallization of the human, mitochondrial voltage-dependent anion-selective channel in the presence of phospholipids.

Overexpressed human voltage-dependent anion-selective channel VDAC or porin from mitochondrial outer membranes has been purified to homogeneity. Electron microscopic analysis of VDAC in detergent solution revealed a uniform particle population consisting of porin monomers. After dialysis of detergent-solubilized porin in the presence of dimyristoylphosphatidylcholine at lipid-to-protein ratios between 0.2 and 0.5 (percentage by weight), mostly multilamellar crystals were obtained. Crystals adsorbed to carbon films flattened during negative staining and air-drying and exhibited different structural features due to differences in the vertical stacking of several crystalline layers, each consisting of one membrane bilayer. Adsorbed, frozen-hydrated multilamellar membrane crystals revealed uniform diffraction patterns with sharp diffraction spots extending to 8.2 A. The surface structure of VDAC was reconstructed from freeze-dried and unidirectionally metal-shadowed crystals. Major protein protrusions were observed from two VDAC monomers present in the unit cell. Differences in the surface structural features indicate alternate orientations of VDAC molecules with respect to the lipid bilayer, allowing the simultaneous imaging of both the cytosolic and intramitochondrial surfaces. Each VDAC molecule consists of a pore lumen with a diameter of 17-20 A surrounded by a protein rim of nonuniform height, suggesting an asymmetrical distribution of protein mass around the diffusion channels.     

Properties of chemically modified porin from Escherichia coli in lipid bilayer membranes

Purified porin OmpF from Escherichia coli outer membrane was chemically modified by acetylation and succinylation of amino groups and by amidation of the carboxyl groups. Native and chemically modified porins were incorporated into lipid bilayer membranes and the permeability properties of the pores were studied. Acetylation and succinylation of the porin trimers had almost no influence on the single channel conductance in the presence of small cations and anions and the cation selectivity remained essentially unchanged as compared with the native porin. Amidation had also only little influence on the single channel conductance and changed the pore conductance at maximum by less than 50%, whereas the cation selectivity of the porin is completely lost after amidation. The results suggest that the structure of the porin pore remains essentially unchanged after chemical modification of the pores and that their cation selectivity is caused by an excess of negatively charged groups inside the pore and/or on the surface of the protein. Furthermore, it seems very unlikely that the pore contains any positively charged group at neutral pH.     

Expression and porin activity of P28 and OMP-1F during intracellular Ehrlichia chaffeensis development

Ehrlichia chaffeensis, an obligatory intracellular gram-negative bacterium, must take up various nutrients and metabolic compounds because it lacks many genes involved in metabolism. Nutrient uptake by a gram-negative bacterium occurs primarily through pores or channels in the bacterial outer membrane. Here we demonstrate that isolated E. chaffeensis outer membranes have porin activities, as determined by a proteoliposome swelling assay. The activity was partially blocked by an antibody that recognizes the two most abundant outer membrane proteins, P28/OMP-19 and OMP-1F/OMP-18. Both proteins were predicted to have structural features characteristic of porins, including 12 transmembrane segments comprised of amphipathic and antiparallel beta-strands. The sodium dodecyl sulfate stability of the two proteins was consistent with a beta-barrel structure. Isolated native P28 and OMP-1F exhibited porin activities, with pore sizes similar to and larger than, respectively, that of OprF, which is the porin with the largest pore size known to date. E. chaffeensis experiences temperature changes during transmission by ticks. During the intracellular development of E. chaffeensis, both P28 and OMP-1F were expressed mostly in the mid-exponential growth phase at 37 degrees C and the late-exponential growth phase at 28 degrees C. The porin activity of proteoliposomes reconstituted with proteins from the outer membrane fractions derived from bacteria in the mid- and late-exponential growth phases at 28 degrees C and 37 degrees C correlated with the expression levels of P28 and OMP-1F. These results imply that P28 and OMP-1F function as porins with large pore sizes, suggesting that the differential expression of these two proteins might regulate nutrient uptake during intracellular E. chaffeensis development at both temperatures.     

Porin from bacterial and mitochondrial outer membranes

The outer membrane of gram-negative bacteria acts as a molecular filter with defined exclusion limit for hydrophilic substances. The exclusion limit is dependent on the type of bacteria and has for enteric bacteria like Escherichia coli and Salmonella typhimurium a value between 600 and 800 Daltons, whereas molecules with molecular weights up to 6000 can penetrate the outer membrane of Pseudomonas aeruginosa. The molecular sieving properties result from the presence of a class of major proteins called porins which form trimers of identical subunits in the outer membrane. The porin trimers most likely contain only one large but well-defined pore with a diameter between 1.2 and 2 nm. Mitochondria are presumably descendents of gram-negative bacteria. The outer membrane of mitochondria contains in agreement with this hypothesis large pores which are permeable for hydrophilic substances with molecular weights up to 6000. The mitochondrial porins are processed by the cell and have molecular weights around 30,000 Daltons. There exists some evidence that the pore is controlled by electric fields and metabolic processes.     

Outer-membrane protein PhoE from Escherichia coli forms anion-selective pores in lipid-bilayer membranes

Porin PhoE of the outer membrane of Escherichia coli was isolated and purified. Reconstitution experiments with lipid bilayer membranes showed that this protein formed pores which had a single channel conductance of 210 pS at 0.1 M KCl. The PhoE pores were obviously not voltage-controlled or regulated. In contrast to pores formed by the OmpF porin from E. coli the PhoE channel was found to be anion-selective at neutral pH. Chloride is about three to ten times more permeable through the pore than alkali ions. On the basis of the observed pH dependence of the permeability ratio of anions and cations, this anionic selectivity is explained by the assumption that the PhoE pore contains an excess of fixed positive charges.     

Properties of the large ion-permeable pores formed from protein F of Pseudomonas aeruginosa in lipid bilayer membranes

The incorporation of porin protein F from the outer membrane of Pseudomonas aeruginosa into artificial lipid bilayers results in an increase of the membrane conductance by many orders of magnitude. The membrane conductance is caused by the formation of large ion-permeable channels with a single-channel conductance in the order of 5 nS for 1 M alkali chlorides. The conductance has an ohmic current vs. voltage relationship. Further information on the structure of the pore formed by protein F was obtained by determining the single-channel conductance for various species differing in charge and size, and from zero-current potential measurements. The channel was found to be permeable for large organic ions (Tris+, N(C2H5)4+, Hepes-) and a channel diameter of 2.2 nm could be estimated from the conductance data (pore length of 7.5 nm). At neutral pH the pore is about two times more permeable for cations than for anions, possibly caused by negative charges in the pore. The consistent observation of large water filled pores formed by porin protein F in model membrane systems is discussed in the light of the known low permeability of the Ps. aeruginosa outer membrane towards antibiotics. It is suggested that this results from a relatively low proportion of open functional porin protein F pores in vivo.     

Molecular and functional characterisation of the Serratia marcescens outer membrane protein Omp1

Serratia marcescens outer membrane contains three different general diffusion porins: Omp1, Omp2 and Omp3. Omp1 was cloned and sequenced and it shows a great homology to the family of outer membrane porins that comprises the general porins of enteric bacteria. The gene for Omp1 was transferred into an expression plasmid and was expressed in Escherichia coli UH302 (E. coli UH302 pOM100), a porin deficient strain. Its expression confers a higher susceptibility towards different antibiotics to this strain. Omp1 was purified to homogeneity from outer membrane of E. coli UH302 pOM100. Reconstitution of the purified protein into black lipid bilayers demonstrated that it is a channel-forming component with a single-channel conductance of approximately 2 nS in 1 M KCl similar to that of other porins from enteric bacteria. Omp1 is slightly cation-selective. Its homology to already crystallised members of the family of enteric porins whose three-dimensional-structures are known and allowed the design of a topology model for Omp1. The charge distribution within a porin monomer is similar as in other general diffusion pores. The positively charged amino acids localised at the beta-strands opposite the external loop L3, which restrict the pore diameter in the porin monomer.     

Salmonella typhimurium contains an anion-selective outer membrane porin induced by phosphate starvation.

A mutant of Salmonella typhimurium was selected that is constitutive for the pho regulon. It exhibited constitutive glycerol-3-phosphate transport activity and synthesized a new outer membrane porin. Upon measurement of porin activity in black lipid films, it exhibited anion selectivity. It therefore appears analogous to the Escherichia coli PhoE porin.     

Ionic selectivity of pores formed by the matrix protein (porin) of Escherichia coli.

Incorporation of the matrix protein (porin) from the outer membrane of Escherichia coli into black lipid films results in the formation of ion-permeable pores with a single-pore conductance of the order of 2 nS (in 1 M KCl). Information on the structure of this pore has been obtained by determining the selectivity for various species differing in charge and size. From the permeability of the pore for large organic ions (Tris+, glucosamine+, Hepes-) a minimum pore diameter of 0.8 nm is estimated. At neutral pH the pore is two to four times more permeable for alkali ions than for chloride. On the basis of the observed pH dependence of permeability, this cationic selectivity is explained by the assumption that the pore contains fixed negative charges.     

Pore formation by the mitochondrial porin of rat brain in lipid bilayer membranes

The porin of the outer membrane of rat-brain mitochondria was isolated and purified. The protein showed a single band of apparent Mr 35,500 on dodecyl sulfate-containing polyacrylamide gels. The incorporation of rat-brain porin into artificial lipid bilayer membranes showed that it is able to form pores with an average single-channel conductance of 400 pS in 0.1 M KCI. The pores were found to be voltage-dependent and switched to substrates at higher transmembrane potentials. The voltage-dependence of the rat brain pore was considerably smaller than that of the other known eukaryotic porins. The possible role of the rat-brain porin in the regulation of transport process across the outer mitochondrial membrane is discussed.     

Solute transport proteins and the outer membrane protein NmpC contribute to heat resistance of Escherichia coli AW1.7

This study aimed to elucidate determinants of heat resistance in Escherichia coli by comparing the composition of membrane lipids, as well as gene expression, in heat-resistant E. coli AW1.7 and heat-sensitive E. coli GGG10 with or without heat shock. The survival of E. coli AW1.7 at late exponential phase was 100-fold higher than that of E. coli GGG10 after incubation at 60°C for 15 min. The cytoplasmic membrane of E. coli AW1.7 contained a higher proportion of saturated and cyclopropane fatty acids than that of E. coli GGG10. Microarray hybridization of cDNA libraries obtained from exponentially growing or heat-shocked cultures was performed to compare gene expression in these two strains. Expression of selected genes from different functional groups was quantified by quantitative PCR. DnaK and 30S and 50S ribosomal subunits were overexpressed in E. coli GGG10 relative to E. coli AW1.7 upon heat shock at 50°C, indicating improved ribosome stability. The outer membrane porin NmpC and several transport proteins were overexpressed in exponentially growing E. coli AW1.7. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of membrane properties confirmed that NmpC is present in the outer membrane of E. coli AW1.7 but not in that of E. coli GGG10. Expression of NmpC in E. coli GGG10 increased survival at 60°C 50- to 1,000-fold. In conclusion, the outer membrane porin NmpC contributes to heat resistance in E. coli AW1.7, but the heat resistance of this strain is dependent on additional factors, which likely include the composition of membrane lipids, as well as solute transport proteins.     

Properties of the large ion-permeable pores formed from protein F of Pseudomonas aeruginosa in lipid bilayer membranes

The incorporation of porin protein F from the outer membrane of Pseudomonas aeruginosa into artificial lipid bilayers results in an increase of the membrane conductance by many orders of magnitude. The membrane conductance is caused by the formation of large ion-permeable channels with a single-channel conductance in the order of 5 nS for 1 M alkali chlorides. The conductance has an ohmic current vs. voltage relationship. Further information on the structure of the pore formed by protein F was obtained by determining the single-channel conductance for various species differing in charge and size, and from zero-current potential measurements. The channel was found to be permeable for large organic ions (Tris⁺, N(C₂H₅)₄⁺, Hepes^?) and a channel diameter of 2.2 nm could be estimated from the conductance data (pore length of 7.5 nm). At neutral pH the pore is about two times more permeable for cations than for anions, possibly caused by negative charges in the pore. The consistent observation of large water filled pores formed by porin protein F in model membrane systems is discussed in the light of the known low permeability of the Ps. aeruginosa outer membrane towards antibiotics. It is suggested that this results from a relatively low proportion of open functional porin protein F pores in vivo.     

Crystal structure of osmoporin OmpC from E. coli at 2.0 A

Porins form transmembrane pores in the outer membrane of Gram-negative bacteria with matrix porin OmpF and osmoporin OmpC from Escherichia coli being differentially expressed depending on environmental conditions. The three-dimensional structure of OmpC has been determined to 2.0 A resolution by X-ray crystallography. As expected from the high sequence similarity, OmpC adopts the OmpF-like 16-stranded hollow beta-barrel fold with three beta-barrels associated to form a tight trimer. Unlike in OmpF, the extracellular loops form a continuous wall at the perimeter of the vestibule common to the three pores, due to a 14-residues insertion in loop L4. The pore constriction and the periplasmic outlet are very similar to OmpF with 74% of the pore lining residues being conserved. Overall, only few ionizable residues are exchanged at the pore lining. The OmpC structure suggests that not pore size, but electrostatic pore potential and particular atomic details of the pore linings are the critical parameters that physiologically distinguish OmpC from OmpF.     

Porin of Paramecium mitochondria isolation, characterization and ion selectivity of the closed state

Porin was isolated and purified from mitochondria of Paramecium tetraurelia. The protein showed a single band of apparent Mr 37,000 on sodium dodecyl sulfate polyacrylamide electrophoretograms. The reconstitution of the protein into artificial lipid bilayer membranes revealed it to be a porin giving pores with an average single-channel conductance of 0.26 nS in 0.1 M KCl. This conductance is about half of that of other eukaryotic porins studied to date. The pore formed by the mitochondrial porin of Paramecium was found to be voltage-dependent and switched to a defined substrate at membrane voltages larger than 20 mV. In the open state the pore exhibited the characteristics of a general diffusion pore because the mobility sequence of the ions inside the pore was similar to that in the bulk aqueous phase. The effective diameter was estimated to be about 1.3 nm. The properties of the low conductance state of the pore were studied in detail. In this state the pore favored the passage of cations, in contrast to the open state which favored anions slightly. The possible role of the low-conductance state in the regulation of transport processes across the outer mitochondrial membrane and in mitochondrial metabolism is discussed.     

Effects of magnesium and sodium ions on the outer membrane permeability of cephalosporins in Escherichia coli

Both Mg2+ and Na+ stimulated the outer membrane permeation of negatively charged cephalosporins in Escherichia coli without any significant alteration of the permeation of a zwitterionic cephalosporin. Such stimulation was not observed in an E. coli mutant lacking porins. The stimulation was caused by the direct interaction between the cations and the porin pores, which resulted in a decrease in cation selectivity of both the Omp F and Omp C porin pores.     

Deletion variants of Neurospora mitochondrial porin: electrophysiological and spectroscopic analysis

Mitochondrial porins are predicted to traverse the outer membrane as a series of beta-strands, but the precise structure of the resulting beta-barrel has remained elusive. Toward determining the positions of the membrane-spanning segments, a series of small deletions was introduced into several of the predicted beta-strands of the Neurospora crassa porin. Overall, three classes of porin variants were identified: i), those producing large, stable pores, indicating deletions likely outside of beta-strands; ii), those with minimal pore-forming ability, indicating disruptions in key beta-strands or beta-turns; and iii), those that formed small unstable pores with a variety of gating and ion-selectivity properties. The latter class presumably results from a subset of proteins that adopt an alternative barrel structure upon the loss of stabilizing residues. Some variants were not sufficiently stable in detergent for structural analysis; circular dichroism spectropolarimetry of those that were did not reveal significant differences in the overall structural composition among the detergent-solubilized porin variants and the wild-type protein. Several of the variants displayed altered tryptophan fluorescence profiles, indicative of differing microenvironments surrounding these residues. Based on these results, modifications to the existing models for porin structure are proposed.