共查询到20条相似文献,搜索用时 78 毫秒
1.
Water-soluble polymers (WSPs) are a versatile group of chemicals used across industries for different purposes such as thickening, stabilizing, adhesion and gelation. Synthetic polymers have tailored characteristics and are chemically homogeneous, whereas plant-derived biopolymers vary more widely in their specifications and are chemically heterogeneous. Between both sources, microbial polysaccharides are an advantageous compromise. They combine naturalness with defined material properties, precisely controlled by optimizing strain selection, fermentation operational parameters and downstream processes. The relevance of such bio-based and biodegradable materials is rising due to increasing environmental awareness of consumers and a tightening regulatory framework, causing both solid and water-soluble synthetic polymers, also termed ‘microplastics’, to have come under scrutiny. Xanthan gum is the most important microbial polysaccharide in terms of production volume and diversity of applications, and available as different grades with specific properties. In this review, we will focus on the applicability of xanthan gum in agriculture (drift control, encapsulation and soil improvement), considering its potential to replace traditionally used synthetic WSPs. As a spray adjuvant, xanthan gum prevents the formation of driftable fine droplets and shows particular resistance to mechanical shear. Xanthan gum as a component in encapsulated formulations modifies release properties or provides additional protection to encapsulated agents. In geotechnical engineering, soil amended with xanthan gum has proven to increase water retention, reduce water evaporation, percolation and soil erosion – topics of high relevance in the agriculture of the 21st century. Finally, hands-on formulation tips are provided to facilitate exploiting the full potential of xanthan gum in diverse agricultural applications and thus providing sustainable solutions. 相似文献
2.
Nuo Zhen Xinya Wang Xiang Li Jin Xue Yitao Zhao Min Wu Dongfang Zhou Jingsheng Liu Jinshan Guo Hao Zhang 《Microbial biotechnology》2022,15(5):1324-1338
Plastics materials used for food packaging are recalcitrant, leading to a growing global environmental problem, which arouses the attention of environmental protection departments in many countries. Therefore, to meet the increasing demand for sustainable and environment-friendly consumer products, it is necessary for the food industry to develop natural antibacterial materials for food preservation. This review summarizes the common biodegradable natural antimicrobial agents and their applications in food preservation; as well as an overview of five commonly used biodegradable protein-based polymers, such as zein, soy protein isolate, gelatin and whey protein, with special emphasis on the advantages of protein-based biopolymers and their applications in food packaging industry. 相似文献
3.
Poly(hydroxybutyrate) (PHB) has become an attractive biomaterial in research and development for past few years. It is natural bio-based aliphatic polyester produced by many types of bacteria. Due to its biodegradable, biocompatible, and eco-friendly nature, PHB can be used in line with bioactive species. However, high production cost, thermal instability, and poor mechanical properties limit its desirable applications. So there is need to incorporate PHB with other materials or biopolymers for the development of some novel PHB based biocomposites for value addition. Many attempts have been employed to incorporate PHB with other biomaterials (or biopolymers) to develop sustainable biocomposites. In this review, some recent developments in the synthesis of PHB based biocomposites and their biomedical, packaging and tissue engineering applications have been focused. The development of biodegradable PHB based biocomposites with improved mechanical properties could be used to overcome its native limitations hence to open new possibilities for industrial applications. 相似文献
4.
A new guar gum derivative containing amino group was synthesized through nucleophilic substitution of p-toluenesulfonate activated hydroxypropyl guar gum with ethanolamine. For the preparation of p-toluenesulfonate esters hydroxypropyl guar gum, the results showed that the reaction rate was optimal at 25°C and the reaction could reach equilibrium state when it was carried out for 10h at 25°C. For the nucleophilic substitution of tosyl group with ethanolamine, the reaction was completed after 10h reaction at 50°C. The structures of products were characterized by NMR and FT-IR spectroscopy. The results showed that the p-toluenesulfonate esters can be effectively substituted by ethanolamine to form the hydroxyethyl amino hydroxypropyl guar gum (EAHPG). The content of nitrogen of EAHPG was determined by acid-base titration and element analysis. 相似文献
5.
Steinbüchel A 《Current opinion in biotechnology》2005,16(6):607-613
In recent years the biotechnological production of bulk biopolymers has focused on the synthesis of biodegradable polymers to replace their non-biodegradable counterparts derived from fossil resources. Examples include polyhydroxyalkanoates and polylactic acid, which act as substitutes for polyolefins. By contrast, the biotechnological production of non-biodegradable polymers from renewable resources has so far been scarcely considered, probably because this idea contradicts the paradigm that all natural compounds are biodegradable. Polythioesters, which were recently described as new biopolymers, do not follow this paradigm because although they are produced by bacteria, they are persistent to microbial degradation. Mankind has a need for both non-biodegradable and biodegradable polymers and methods to produce them from renewable resources will be of great value. 相似文献
6.
Biopolymers can be a green alternative to fossil-based polymers and can contribute to environmental protection because they are produced using renewable raw materials. Biopolymers are composed of various small subunits (building blocks) that are the intermediates or end products of major metabolic pathways. Most building blocks are secreted directly outside of cells, making downstream processes easier and more economic. These molecules can be extracted from fermentation broth and polymerized to produce a variety of biopolymers, e.g., polybutylene terephthalate, polyethylene terephthalate, polytrimethylene terephthalate, nylon-5,4 and nylon-4,6, with applications in medicine, pharmaceuticals, and textiles. Microbes are unable to naturally produce these types of polymers; thus, the production of building blocks and their polymerization is a fascinating approach for the production of these polymers. In comparison to naturally occurring biopolymers, synthesized polymers have improved and controlled structures and higher purity. The production of monomer units provides a new direction for polymer science because new classes of polymers with unique properties that were not previously possible can be prepared. Furthermore, the engineering of microbes for building-block production is an easy process compared to engineering an entire biopolymer synthesis pathway in a single microbe. Polyesters and polyamide polymers have become an important part of human life, and their demand is increasing daily. In this review, recent approaches and technology are discussed for the production of polyester/polyamide building blocks, i.e., 2-hydroxyisobutyric acid, 3-hydroxypropionic acid, mandelic acid, itaconic acid, adipic acid, terephthalic acid, succinic acid, 1,3-propanediol, 2,3-butanediol, 1,4-butanediol, 1,3-butanediol, cadaverine, and putrescine. 相似文献
7.
《Critical reviews in biotechnology》2013,33(4):338-357
AbstractMicroorganisms synthesize intracellular, structural and extracellular polymers also referred to as biopolymers for their function and survival. These biopolymers play specific roles as energy reserve materials, protective agents, aid in cell functioning, the establishment of symbiosis, osmotic adaptation and support the microbial genera to function, adapt, multiply and survive efficiently under changing environmental conditions. Viscosifying, gelling and film forming properties of these have been exploited for specific significant applications in food and allied industries. Intensive research activities and recent achievements in relevant and important research fields of global interest regarding film forming microbial biopolymers is the subject of this review. Microbial polymers such as pullulan, kefiran, bacterial cellulose (BC), gellan and levan are placed under the category of exopolysaccharides (EPS) and have several other functional properties including film formation, which can be used for various applications in food and allied industries. In addition to EPS, innumerable bacterial genera are found to synthesis carbon energy reserves in their cells known as polyhydroxyalkanoates (PHAs), microbial polyesters, which can be extruded into films with excellent moisture and oxygen barrier properties. Blow moldable biopolymers like PHA along with polylactic acid (PLA) synthesized chemically in vitro using lactic acid (LA), which is produced by LA bacteria through fermentation, are projected as biodegradable polymers of the future for packaging applications. Designing and creating of new property based on requirements through controlled synthesis can lead to improvement in properties of existing polysaccharides and create novel biopolymers of great commercial interest and value for wider applications. Incorporation of antimicrobials such as bacteriocins or silver and copper nanoparticles can enhance the functionality of polymer films especially in food packaging applications either in the form of coatings or wrappings. Use of EPS in combinations to obtain desired properties can be evaluated to increase the application range. Controlled release of active compounds, bioactive protection and resistance to water can be investigated while developing new technologies to improve the film properties of active packaging and coatings. An holistic approach may be adopted in developing an economical and biodegradable packaging material with acceptable properties. An interdisciplinary approach with new innovations can lead to the development of new composites of these biopolymers to enhance the application range. This current review focuses on linking and consolidation of recent research activities on the production and applications of film forming microbial polymers like EPS, PHA and PLA for commercial applications. 相似文献
8.
Novel chitin and chitosan nanofibers in biomedical applications 总被引:2,自引:0,他引:2
Chitin and its deacetylated derivative, chitosan, are non-toxic, antibacterial, biodegradable and biocompatible biopolymers. Due to these properties, they are widely used for biomedical applications such as tissue engineering scaffolds, drug delivery, wound dressings, separation membranes and antibacterial coatings, stent coatings, and sensors. In the recent years, electrospinning has been found to be a novel technique to produce chitin and chitosan nanofibers. These nanofibers find novel applications in biomedical fields due to their high surface area and porosity. This article reviews the recent reports on the preparation, properties and biomedical applications of chitin and chitosan based nanofibers in detail. 相似文献
9.
Polyhydroxyalkanoates (PHAs) are a class of biopolyesters that are synthesized intracellularly by microorganisms, mainly by different genera of eubacteria. These biopolymers have diverse physical and chemical properties that also classify them as biodegradable in nature and make them compatible to living systems. In the last two decades or so, PHAs have emerged as potential useful materials in the medical field for different applications owing to their unique properties. The lower acidity and bioactivity of PHAs confer them with minimal risk compared to other biopolymers such as poly-lactic acid (PLA) and poly-glycolic acid (PGA). Therefore, the versatility of PHAs in terms of their non-toxic degradation products, biocompatibility, desired surface modifications, wide range of physical and chemical properties, cellular growth support, and attachment without carcinogenic effects have enabled their use as in vivo implants such as sutures, adhesion barriers, and valves to guide tissue repair and in regeneration devices such as cardiovascular patches, articular cartilage repair scaffolds, bone graft substitutes, and nerve guides. Here, we briefly describe some of the most recent innovative research involving the use of PHAs in medical applications. Microbial production of PHAs also provides the opportunity to develop PHAs with more unique monomer compositions economically through metabolic engineering approaches. At present, it is generally established that the PHA monomer composition and surface modifications influence cell responses.PHA synthesis by bacteria does not require the use of a catalyst (used in the synthesis of other polymers), which further promotes the biocompatibility of PHA-derived polymers. 相似文献
10.
Yu Jung Sohn Hee Taek Kim Kei‐Anne Baritugo Seo Young Jo Hye Min Song Se Young Park Su Kyeong Park Jiwon Pyo Hyun Gil Cha Hoyong Kim Jeong‐Geol Na Chulhwan Park Jong‐Il Choi Jeong Chan Joo Si Jae Park 《Biotechnology journal》2020,15(6)
Advances in scientific technology in the early twentieth century have facilitated the development of synthetic plastics that are lightweight, rigid, and can be easily molded into a desirable shape without changing their material properties. Thus, plastics become ubiquitous and indispensable materials that are used in various manufacturing sectors, including clothing, automotive, medical, and electronic industries. However, strong physical durability and chemical stability of synthetic plastics, most of which are produced from fossil fuels, hinder their complete degradation when they are improperly discarded after use. In addition, accumulated plastic wastes without degradation have caused severe environmental problems, such as microplastics pollution and plastic islands. Thus, the usage and production of plastics is not free from environmental pollution or resource depletion. In order to lessen the impact of climate change and reduce plastic pollution, it is necessary to understand and address the current plastic life cycles. In this review, “sustainable biopolymers” are suggested as a promising solution to the current plastic crisis. The desired properties of sustainable biopolymers and bio‐based and bio/chemical hybrid technologies for the development of sustainable biopolymers are mainly discussed. 相似文献
11.
Erni P Windhab EJ Gunde R Graber M Pfister B Parker A Fischer P 《Biomacromolecules》2007,8(11):3458-3466
Acacia gum is a hybrid polyelectrolyte containing both protein and polysaccharide subunits. We study the interfacial rheology of its adsorption layers at the oil/water interface and compare it with adsorbed layers of hydrophobically modified starch, which for economic and political reasons is often used as a substitute for Acacia gum in technological applications. Both the shear and the dilatational rheological responses of the interfaces are considered. In dilatational experiments, the viscoelastic response of the starch derivative is just slightly weaker than that for Acacia gum, whereas we found pronounced differences in shear flow: The interfaces covered with the plant gum flow like a rigid, solidlike material with large storage moduli and a linear viscoelastic regime limited to small shear deformations, above which we observe apparent yielding behavior. In contrast, the films formed by hydrophobically modified starch are predominantly viscous, and the shear moduli are only weakly dependent on the deformation. Concerning their most important technological use as emulsion stabilizers, the dynamic interfacial responses imply not only distinct interfacial dynamics but also different stabilizing mechanisms for these two biopolymers. 相似文献
12.
Electronics wastes (e‐wastes) are the major concern in the rapid expansion of smart/wearable/portable electronics in modern high‐tech society. Informal processing and enormous gathering of e‐wastes can lead to adverse human/animal health effects and environmental pollution worldwide. Currently, these issues are a big headache and require the scientific community to develop effective green energy harvesting technologies using biodegradable/biocompatible materials. Piezoelectric/triboelectric nanogenerators (PNGs/TNGs) are considered one of the most promising renewable green energy sources for the conversion of mechanical/biomechanical energies into electricity. However, organic/inorganic material based PNGs/TNGs are very much incompatible, and considered e‐wastes for their non‐biodegradability. This review covers potential uses of biodegradable/biocompatible materials which are wasted every day as nature driven material based bio‐nanogenerators with a particular focus on their applications in flexible PNGs/TNGs fabrication. Structural investigation and possible working principles are described first in order to outline the basic mechanism of bio‐inspired materials behind energy harvesting. Then, energy harvesting abilities and the mechanical sensing of bio‐inspired integrated flexible devices are discussed under various mechanical/biomechanical activities. Finally, their potential applications in various flexible, wearable, and portable electronic fields are demonstrated. These bio‐inspired energy harvesting devices can make huge changes in fields as diverse as portable electronics, in vitro/in vivo biomedical applications, and many more. 相似文献
13.
For decades microbial exopolysaccharides have been invaluable ingredients in the food industry, as well as having many attractive pharmaceutical and chemical applications. Gellan gum is a comparatively new gum elaborated by the Gram-negative bacterium Sphingomonas paucimobilis. Although its physico-chemical properties have been well characterized, the ecology and physiology of Sphingomonas, and the factors influencing the fermentation process for production of this gum have received much less attention. This review focuses on the metabolism and the enzymic activity of this bacterium, as well as the factors that influence gellan production, including process temperature, pH, stirring rate, oxygen transfer, and composition of the production medium. Potential strategies for improving the production process are discussed in the context of processes for the production of other microbial biopolymers, particularly exopolysaccharides. In addition, the importance and potential utility of gellan lyases in modification of gellan and in other applications is critically evaluated. 相似文献
14.
Producing some small hydrophobic molecules in microbes is challenging. Often these molecules cannot cross membranes, and thus their production may be limited by lack of storage space in the producing organism. This study reports a new technology for in vivo storage of valuable hydrophobic products in/on biopolymer bodies in Escherichia coli. A biodegradable and biocompatible polyester – poly (3-hydroxybutyrate) (PHB) – was selected as the intracellular storage vessel to encapsulate lycopene, which is a chromogenic model compound. The hydrophobic interaction between lycopene and PHB was verified by using in vitro binding test and sucrose density gradient centrifugation. Further in vivo characterization was performed by using Confocal Laser Scanning Microscopy (CLSM). The images validated the in vivo co-localization between PHB granules and lycopene. The images also showed that lycopene aggregated in bacteria that did not produce PHB, which may challenge the commonly accepted hypothesis that most lycopene molecules are stored in cell membranes of recombinant host. We also confirmed that producing PHB did not negatively affect lycopene biosynthesis in the E. coli strains and collected data suggesting that PHB titer and lycopene titer were positively correlated when the cells were engineered to co-produce them. The biopolymers that encapsulated hydrophobic molecules could have many useful applications, especially in controlled release because the polymers are biodegradable, and the encapsulated products would be released during the polymer degradation. 相似文献
15.
Omid Etemadi Ioana G. Petrisor Daeik Kim Meng-Wei Wan Teh Fu Yen 《Soil & Sediment Contamination》2003,12(5):647-661
Environmental contamination with heavy metals and radionuclides remains a major problem worldwide. The current clean-up methodologies are based on energy-intensive engineering processes, which are disruptive and costly. A new universal technology targeted for the permanent enclosure and fixation of nuclear and other extreme hazardous metallic wastes in subsurface sites is needed. Such technology will be useful in treating contamination at many sites in the U.S., with specific applications to Department of Energy (DOE) sites. Biopolymers are potential tools for such an innovative technology. Biopolymers have repeated sequences, and therefore provide ample opportunity for chemical reactions with metals, soil particles, and other biopolymers. They also have the additional ability of creating cross-linking interpenetrating networks that can encapsulate the contaminants. Based on this concept, in the present work five biopolymers (xanthan, chitosan, polyhydroxy butyrate, guar gum, polyglutamic acid) were investigated for potential use in the stabilization of metals in the subsurface. The effects of these biopolymers (used alone and in combinations) on soil characteristics (permeability, shear strength) and their metal uptake ability have been studied using laboratory drainage flow systems. Biopolymer solutions were run through the experimental sandpack columns, followed by copper solution and leaching agents (distilled water and hydrochloric acid). The permeability and shear strength of sand were evaluated. Copper uptake capacity of each biopolymer and combination of biopolymers was also studied along with subsequent leaching. All biopolymers tested improved sand characteristics (by decreasing permeability and increasing shear strength) and had good metal uptake ability (60–90%) with relatively low leachability (10–22%). While biopolymers used alone were more efficient in metal uptake, the combination of two biopolymers (xanthan and chitosan) had an increasing plugging effect. These results show the potential of using biopolymers in subsurface metal stabilization. 相似文献
16.
Roberto Mazzoli Francesca Bosco Itzhak Mizrahi Edward A. Bayer Enrica Pessione 《Biotechnology advances》2014
Lactic acid bacteria (LAB) have long been used in industrial applications mainly as starters for food fermentation or as biocontrol agents or as probiotics. However, LAB possess several characteristics that render them among the most promising candidates for use in future biorefineries in converting plant-derived biomass—either from dedicated crops or from municipal/industrial solid wastes—into biofuels and high value-added products. Lactic acid, their main fermentation product, is an attractive building block extensively used by the chemical industry, owing to the potential for production of polylactides as biodegradable and biocompatible plastic alternative to polymers derived from petrochemicals. LA is but one of many high-value compounds which can be produced by LAB fermentation, which also include biofuels such as ethanol and butanol, biodegradable plastic polymers, exopolysaccharides, antimicrobial agents, health-promoting substances and nutraceuticals. Furthermore, several LAB strains have ascertained probiotic properties, and their biomass can be considered a high-value product. The present contribution aims to provide an extensive overview of the main industrial applications of LAB and future perspectives concerning their utilization in biorefineries. Strategies will be described in detail for developing LAB strains with broader substrate metabolic capacity for fermentation of cheaper biomass. 相似文献
17.
W Gangotri R Jain-Raina SB Babbar 《World journal of microbiology & biotechnology》2012,28(5):2279-2285
Guar gum, a galactomannan, has been reported to be an inexpensive substitute of agar for microbial culture media. However,
its use is restricted probably because of (1) its highly viscous nature even at high temperatures, making dispensing of the
media to Petri plates difficult and (2) lesser clarity of the guar gum gelled media than agar media due to impurities present
in guar gum. To overcome these problems, three guar gum derivatives, carboxymethyl guar, carboxymethyl hydroxypropyl guar
and hydroxypropyl guar, were tested as gelling agents for microbial growth and differentiation. These were also evaluated
for their suitability for other routine microbiological methods, such as, enumeration, use of selective and differential media,
and antibiotic sensitivity test. For evaluation purpose, growth and differentiation of eight fungi and eight bacteria grown
on the media gelled with agar (1.5%), guar gum (4%) or one of the guar gum derivatives (4%), were compared. All fungi and
bacteria exhibited normal growth and differentiation on all these media. Generally, growth of most of the fungi was better
on guar gum derivatives gelled medium than on agar medium. The enumeration carried out for Serratia sp. and Pseudomonas aeruginosa by serial dilution and pour plate method yielded similar counts in all the treatments. Likewise, the selective succinate
medium, specific for P. aeruginosa, did not allow growth of co-inoculated Bacillus sp. even if gelled with guar gum derivatives. The differential medium, Congo red mannitol agar could not differentiate between
Agrobacterium
tumefaciens and Rhizobium meliloti on color basis, if gelled with guar gum or any of its derivatives However, for antibiotic sensitivity tests for both Gram-positive
and -negative bacteria, guar gum and its derivatives were as effective as agar. 相似文献
18.
Two synthetic genes that code for artificial proteins have been constructed that were modeled on the most regularly repeated hydrophobic domain of human tropoelastin. We compare the physicochemical properties of the recombinant products that differ in their primary structure; the alanine/lysine-rich cross-linking domains, which are highly conserved in mammalian tropoelastin, were either present or absent in the recombinant products. Both biopolymers showed thermoresponsive properties, and variations were observed that were dependent on solution conditions. Cell compatibility was assayed using the biopolymers as coating agents in culture experiments with a neuroblastoma cell line; cell adhesion and proliferation effects were evaluated. The cells were found to retain their neural differentiation potential. The data presented in our work support the usefulness of these versatile biopolymers for a variety of applications related to biotechnology and biomedicine. 相似文献
19.
J. H. Song R. J. Murphy R. Narayan G. B. H. Davies 《Philosophical transactions of the Royal Society of London. Series B, Biological sciences》2009,364(1526):2127-2139
Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers.The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all ‘good’ or petrochemical-based products are all ‘bad’. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated ‘home’ composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted. 相似文献
20.
Vinod V.T. Padil Stanisław Wacławek Miroslav Černík Rajender S. Varma 《Biotechnology advances》2018,36(7):1984-2016
The prospective uses of tree gum polysaccharides and their nanostructures in various aspects of food, water, energy, biotechnology, environment and medicine industries, have garnered a great deal of attention recently. In addition to extensive applications of tree gums in food, there are substantial non-food applications of these commercial gums, which have gained widespread attention due to their availability, structural diversity and remarkable properties as ‘green’ bio-based renewable materials. Tree gums are obtainable as natural polysaccharides from various tree genera possessing exceptional properties, including their renewable, biocompatible, biodegradable, and non-toxic nature and their ability to undergo easy chemical modifications. This review focuses on non-food applications of several important commercially available gums (arabic, karaya, tragacanth, ghatti and kondagogu) for the greener synthesis and stabilization of metal/metal oxide NPs, production of electrospun fibers, environmental bioremediation, bio-catalysis, biosensors, coordination complexes of metal–hydrogels, and for antimicrobial and biomedical applications. Furthermore, polysaccharides acquired from botanical, seaweed, animal, and microbial origins are briefly compared with the characteristics of tree gum exudates. 相似文献