Uptake of protoplasts from the filamentous fungiAspergillus nidulans andFusarium oxysporum into protoplasts from celery (Apium graveolens L.)

Summary Protoplasts isolated from celery cell suspension cultures, were mixed with fungal protoplasts, from either the saprophytic speciesAspergillus nidulans or the pathogenic speciesFusarium oxysporum. The incubation of protoplast mixtures with PEG caused close adhesion between plant and fungal protoplasts. Subsequent dilution of PEG resulted in the uptake of protoplasts from either fungal species into the plant protoplast cytoplasm. A range of PEG concentrations, incubation times and dilution rates were tested to maximise adhesion and uptake frequencies. Identification of uptake was achieved either by fluorescent staining of nuclei or by electron-microscopy. A maximum of 10% celery protoplasts had taken upA. nidulans protoplasts after PEG treatment. Fungal protoplasts were taken up into celery protoplast cytoplasm by endocytosis, and were maintained within vesicles; two bounding membranes were observed by electron microscopy. Plant protoplast viability was determined during prolonged incubation following fungal protoplast uptake. The presence ofA. nidulans protoplasts tended to maintain celery protoplast viability and although some morphological disintegration occurred intact celery protoplasts remained for at least 92 h after uptake. The uptake ofF. oxysporum protoplasts markedly depressed celery protoplast viability after 24 h incubation and greater celery protoplast disintegration occurred.Abbreviations PEG Polyethylene glycol - DAPI 4,6-diaminido-2-phenylindole - 2,4-D 2,4-dichlorophenoxyacetic acid     

Electrofusion of protoplasts from celery (Apium graveolens L.) with protoplasts from the filamentous fungus Aspergillus nidulans

A method was developed for electrofusion of higher-plant protoplasts from celery and protoplasts from the filamentous fungus Aspergillus nidulans. Initially, methods for the fusion of protoplasts from ecch species were determined individually and, subsequently, electrical parameters for fusion between the species were determined. Pronase-E treatment and the presence of calcium ions markedly increased celery protoplast stability under the electrical conditions required and increased fusion frequency with A. nidulans protoplasts. A reduction in protoplast viability was observed after electrofusion but the majority of the protoplasts remained viable over a 24-h incubation period. A small decline in protoplast respiration rate occurred during incubation but those celery protoplasts fused with A. nidulans protoplasts showed elevated respiration rates for 3 h after electrofusion.Abbreviations AC alternating current - DC direct current     

Protoplast-like structures formation from two species of enterobacteriaceae by fosfomycin treatment

A procedure for protoplasts formation from Escherichia coli and Serratia marcescens by treatment with fosfomycin alone is described. This method gives high and low yields of stable protoplasts from E. coli and S. marcescens respectively. In the last case numerous spheroplasts were obtained. Electron micrographs of intact cells, protoplasts and spheroplasts are shown.     

Plant regeneration from protoplasts of Enteromorpha intestinalis (Chlorophyta, Ulvophyceae) as seedstock for macroagal culture

A continuous micropropagation was established from protoplasts of thegreen alga Enteromorpha intestinalis. The effects of two differentcrude enzymes and the osmolarity at different concentrations of the enzymesolution on algal protoplast yields were tested. The optimal enzymecomposition for cell wall digestion and protoplast viability was 2%cellulase R 10 Onozuka and 2% Aplysie with 0.5 m mannitol. Largenumbers of Enteromorpha protoplasts were released (10.0 × 10⁶protoplasts from 1 g fresh thalli) and settled on a rangeof substrata. Regeneration of the protoplasts followed the normal patternfor this species. Conditions for pure cultures and efficient systems offloating supports with nets were determined to optimise the product qualityof plantlets of Enteromorpha. A promising storage process has beendeveloped which involves including protoplasts in beads of alginic acid gel.Plants regenerated from protoplasts may also be used as seedstock tofacilitate propagation for macroalgal culture.     

Plant regeneration from the protoplasts of Solanum tuberosum, S. nigrum and S. bulbocastanum

The mesophyll protoplasts were isolated from the Solanum tuberosum (S. tbr) clones of different ploidy level (4x Bzura cv., 2x H-8105, and 2x ZEL-1136) as well as from the wild species: S. bulbocastanum (S. blb, 2x) and two accessions of S. nigrum (S. ngr, 6x). Additionally, the protoplasts were isolated from the cell suspensions of Bzura cv. and H-8105 clone. The conditions of protoplast isolation as well as the media for their culturing and regeneration, were selected and optimized for the studied genotypes. For mesophyll protoplasts, the shooting calli were produced by all the cultured protoclones except that of S. bulbocastanum. The shoots excised from the protoplast-derived calli developed into whole plants in all the studied potato clones but only in one accession of S. nigrum, i.e. S. ngr var. gigantea. As for suspension-cell-derived protoplasts, only H-8105 clone produced the regenerative type of calli, though normal shoots could not be obtained. The regenerative capacity of the protoplasts isolated from leaves and cell suspensions is compared and discussed. We regret to report the death of M. Sc. Maria Borkowska after the completion of this work.     

Preparation and regeneration of protoplasts of three fungi of Boletaceae

Protoplasts of three fungi of Boletaceae,Suillus luteus, S. grevillei, andBoletinus cavipes, were prepared with yields of 45, 8.0, and 1.8×10⁷/g fresh mycelia under the optimal conditions, respectively. Nucleate protoplasts accounted for 42% of the whole preparation ofS. luteus and 32% of that ofS. grevillei, and 21% of the nucleate protoplasts ofS. luteus and 35% of those ofS. grevillei possesed two nuclei. Regeneration efficiency of protoplasts was 0.4% forS. luteus and 0.05% forS. grevillei. The regeneration ofB. cavipes protoplasts was also confirmed. Optimal conditions for regeneration were determined. Addition of gellan gum instead of agar to the medium and activated charcoal treatment of agar medium increased the regeneration efficiency significantly.     

An efficient protocol for plant regeneration from protoplasts of the moss <Emphasis Type="Italic">Atrichum undulatum P. Beauv in vitro</Emphasis>

A system for plant regeneration from protoplasts of the moss, Atrichum undulatum (Hedw.) P. Beauv. in vitro, is first reported. Viable protoplasts were isolated at about 9 × 10⁵ protoplasts g⁻¹ fresh weight from 10 to 18 days protonemata. For regeneration of protoplasts, viable protoplasts were cultured in liquid–solid medium containing surface liquid medium MS (0.4 M mannitol) and subnatant solid medium Benecke (0.3 M mannitol) at 20 °C under a 16-h photoperiod white light after 12 h preculture in darkness at 20 °C. The great majority of protoplasts follow a regenerative sequence: formation of asymmetric cells in 2–3 days; division of the asymmetric cells to 2–3 cells in 4–5 days, and further develop to produce a new chloronemal filament in 15 days. Juvenile gametophyte can be visible in 20 days. The plating ratio of cell cluster regenerated from protoplasts reaches up to 45%. Transient expression experiments indicate the electroporation uptake of DNA is possible.     

Division frequency of pea protoplasts in relation to starch accumulation

Division frequency of alginate-embedded pea (Pisum sativum var. Belman) protoplasts derived from embryonic shoot tips was studied quantitatively by image analysis in relation to starch accumulation and protoplast size. Protoplast divisions were observed from day 4 on and the number of protoplasts undergoing division increased in a stepwise manner to 70% the following days. The starch content increased rapidly during the first 3 days of culture prior to the onset of division and resulted a 4.2-fold increase in the intracellular starch area and a 3.0-fold increase (from 27% to 80%) in the number of protoplasts containing starch. Subsequent periods with rapid increases the number of dividing protoplasts were preceded by further starch accumulation. Dividing protoplasts were 33–60% smaller and contained 8–42% less starch than non-dividing protoplasts. However, calculations showed that, in the dividing protoplasts, the relative area covered by starch was 6–12% higher than in non-dividing protoplasts. These data suggest that starch accumulation precedes division of pea protoplasts.     

Observations on the time course of wall development at the surface of isolated protoplasts

The formation of cell wall fibres at the surface of isolated leaf protoplasts has been studied by scanning electron microscopy. Fibres are not formed on incubated protoplasts until a lag period has elapsed. This period is about 8 h for leaf protoplasts of Nicotiana tabacum and about 45 h for leaf protoplasts of Antirrhinum majus. In the case of Antirrhinum protoplasts the length of the lag period is dependent on the concentration of osmoticum present during the incubation period. If regenerating protoplasts are briefly treated with dilute cellulase, the newly formed wall is completely digested. Such protoplasts are capable of producing new fibres at the surface within minutes of their return to a nutrient medium. These results are discussed in terms of the likely source of the lag period and its significance in wall regeneration studies.Abbreviations MS culture medium used at full strength - 0.1 MS culture medium used at one tenth full strength     

Comparison of cell wall regeneration on maize protoplasts isolated from leaf tissue and suspension cultured cells

Summary The cell wall regeneration on protoplasts derived from maize mesophyll cells was compared with wall regeneration on protoplasts derived from suspension cultured cells using light microscopy, transmission electron microscopy, and mass spectrometry. The time course of cell wall regeneration has shown that the mesophyll protoplasts regenerated walls much slower than the protoplasts derived from cultured cells. Moreover, cell wall materials on the mesophyll protoplasts were often unevenly distributed. Electron microscopy has further demonstrated that the mesophyll protoplasts have less organized and compact walls than the protoplasts from cultured cells. Chemical analysis revealed that the mesophyll protoplasts had a lower ratio ofβ-(1–3)-glucan toβ-(1–4)-glucan than protoplasts from cultured cells. The significance of these results for the viability and development of protoplasts in culture is discussed. National Research Council of Canada paper no. 32458.     

Increased totipotency of protoplasts from Brassica oleracea plants previously regenerated in tissue culture

Factors affecting the division of cells derived from leaf and cotyledon protoplasts from Brassica oleracea L. var. italica (Green Comet hybrid broccoli) were examined to optimize conditions for plant regeneration and to determine whether there was a genetic basis for improved regeneration from protoplasts derived from plants previously regenerated from tissue cultures [15]. When leaf protoplasts from different plants grown from hybrid seed were isolated and cultured simultaneously, division efficiencies of 1–95% were obtained. Cells from some plants showed high division efficiencies in consecutive experiments while cells from other plants had consistently low division rates. More plants from hybrid seed gave high division efficiencies when cotyledon protoplasts were used. However, cotyledon or leaf protoplasts from selfed progeny of regenerated plants produced more vigorous calli and more shoots than protoplasts from hybrid seed. These results suggest that there may be a genetic component to the increased totipotency of Brassica oleracea protoplasts.     

Nontranslation of foreign genetic information for fraction 1 protein under circumstances favorable for direct transfer ofNicotiana gossei isolated chloroplasts intoN. Tabacum protoplasts

Summary The nuclei and cytoplasm ofN. gossei andN. tabacum are compatible to the extent that reciprocal, interspecific F₁ hybrids can be produced by conventional breeding techniques. Conditions were established in which manyN. gossei isolated chloroplasts could be seen by phase and fluorescence microscopy to adhere to 40% of the population of protoplasts obtained from white tissue of variegatedN. tabacum plants and to remain attached after washing the protoplasts. Chloroplasts also could be seen to enter the interior of the protoplasts. After treating albino protoplasts withN. gossei chloroplasts, the protoplasts were subjected to further conditions whereby 65 calluses containing shoots developed. TwentyN. tabacum protoplasts not treated with foreign chloroplasts also produced calluses with shoots to serve as a control. All calluses developed chlorophyll irrespective of whether or not the albino protoplasts had been treated with isolatedN. gossei chloroplasts. The Fraction 1 protein ofN. tabacum has a different electrophoretic mobility from the protein ofN. gossei or anN. gossei xN. tabacum F₁ hybrid. The Fraction 1 protein large subunit is coded by chloroplast DNA, whereas the small subunit is coded by nuclear DNA. Fraction 1 protein was isolated from the variegated shoots of the 65 calluses obtained after treating albino protoplasts with foreign chloroplasts. Immunoelectrophoresis demonstrated the protein from each callus to have a mobility identical toN. tabacum protein. Therefore, under circumstances highly favorable for the direct transfer ofN. gossei isolated chloroplasts (and possibly nuclei also) intoN. tabacum protoplasts, no evidence was obtained to suggest that genetic information contained in the isolated foreign organelles was being translated into the polypeptides of either the large or small subunits of Fraction 1 protein contained in newly differentiated leaves derived from the protoplasts. Supported by Research Grant PCM-75-07368 from the National Science Foundation.     

Somatic hybridization of sexually incompatible top-fruit tree rootstocks,wild pear (Pyrus communis var. pyraster L.) and Colt cherry (Prunus avium x pseudocerasus)

Summary Mesophyll protoplasts of wild pear (Pyrus communis var. pyraster L., Pomoideae) were chemically fused with cell suspension protoplasts of cherry rootstock Colt (Prunus avium x pseudocerasus, Prunoideae), following an electroporation treatment of the separate parental protoplast systems. Fusion-treated protoplasts were cultured, on modified K8P medium, where it had been previously established that neither parental protoplasts were capable of division. Somatic hybrid calli were recovered and, following caulogenesis on MS medium with zeatin and after rooting of regenerated shoots, complete trees were obtained and grown in vivo. Hybridity of these trees was confirmed based on morphological characters, chromosome complement and isozyme analysis. Two separate cloned lines of this intersubfamilial rootstock somatic hybrid (wild pear (+) Colt cherry) were produced. This is the first report of the production of somatic hybrid plants of two woody species, of agronomic value, within the order Rosales.     

Simple method to isolate vacuoles and protoplasts for patch-clamp experiments

It was not possible to obtain protoplasts or vacuoles from the thallus of the liverwortConocephalum conicum by applying cell-wall-degrading enzymes. Therefore, a surgical method was developed to isolate protoplasts and vacuoles. A thallus was plasmolyzed and cut. The few protoplasts along the cutting edge that were not destroyed emerged from the edge under deplasmolysis and became thus accessible for a patch pipette. Whereas under slightly hypoosmolar conditions the emerging protoplast remained largely intact, more hypoosmolar conditions gave rise to isolated vacuoles. This method to isolate protoplasts and vacuoles could also be applied to other plant tissues like leaves ofArabidopsis thaliana. Patch-clamp measurements were performed with isolated vacuoles and excised tonoplast patches. A slowly activating vacuolar channel inC. conicum displayed the characteristic features of higher-plant slowly activating vacuolar channels.Abbreviations AP action potential - SV channel slowly activating vacuolar channel     

Sucrose biosynthesis in Dunaliella

Four independent kinds of observations indicate that the cell wall regenerated by oat (Avena sativa L.) and corn (Zea mays L.) protoplasts in culture is less well developed than that regenerated by tobacco (Nicotiana tabacum L.) protoplasts. Following wall regeneration the cereal protoplasts remained susceptible to osmotic shock upon transfer to water, showed great enlargement, stained poorly with calcofluor white, and maintained a positive internal electrical potential. The development of a negative membrane potential by tobacco protoplasts in culture often occurred simultaneously with the onset of cell division. Since division was observed only in protoplasts which had regenerated good cell walls and had re-established negative membrane potentials it is suggested that culture conditions which favor these two processes should improve protoplast viability.     

Transformation of protoplasts and intact cells from slowly growing embryogenic callus of wheat (Triticum aestivum L.)

A procedure for culturing protoplasts from slowly growing embryogenic calli of wheat was developed. The procedure was dependent on the ability to isolate large numbers of culturable protoplasts from slowly growing embryogenic callus. Approximately 68% of the isolated protoplasts divided, and 22% formed colonies; of the latter, 67% continued to proliferate. Plating efficiency was reduced when protoplasts were transformed by polythylene glycol, electroporation, and/or Agrobacterium. Intact cells were also directly transformed by electroporation. Direct electroporation of the Agrobacterium binary vector into intact cells resulted in a significant increase of GUS activity over the control.     

Nuclear genomic composition of asymmetric fusion products between irradiated transgenic Solanum brevidens and S. tuberosum: limited elimination of donor chromosomes and polyploidization of the recipient genome

Summary The production of asymmetric somatic hybrid calli after fusion between gamma-irradiated protoplasts from transgenic Solanum brevidens and protoplasts from S. tuberosum are reported. Transgenic (kanamycin-resistant, GUS-positive) S. brevidens plants and hairy root clones were obtained after transformation with Agrobacterium tumefaciens LBA 1060 (pRi1855) (pBI121) and LBA 4404 (pRAL4404) (pBI121), and A. rhizogenes LBA 9402 (pRi1855) (pBI121), respectively. Leaf protoplasts isolated from the transgenic plants or root protoplasts from the hairy root clones were fused with S. tuberosum leaf protoplasts, and several calli were selected on kanamycin-containing medium. The relative nuclear DNA content of the hybrid calli was measured by flow cytometry (FCM), and the percentages of DNA of the S. brevidens and S. tuberosum genomes in the calli were determined by dot blot analysis using species-specific DNA probes. Chromosome-specific restriction fragment length polymorphism (RFLP) markers were used to investigate the elimination of specific S. brevidens chromosomes in the hybrids. The combined data on FCM, dot blot and RFLP analysis revealed that 18–62% of the S. brevidens DNA was eliminated in the hybrid calli and that the RFLP marker for chromosome 7 was absent in seven out of ten calli. The absence of RFLP markers for chromosomes 5 and 11 hardly ever occurred. In most of the hybrids the ploidy level of the S. tuberosum genome had increased considerably.     

Co-culture ofFrankia alni subsp.pommerii (strain ACN1 AG ) with birch (Betula papyrifera) protoplasts

The present study was undertaken to set up an experimental system in which barriers to infection of a non-host plant related to the presence of the cell wall, at the level of recognition and/or the necessity of penetrating the cell wall, might be bypassed. Co-cultures betweenFrankia alni subsp.pommerii (strain ACN1 ^AG ) andBetula papyrifera protoplasts were established. Betula protoplasts remained viable after 2 weeks with no substantial cell wall regeneration. Suppression of the wall barrier was not sufficient to allowFrankia infection under the conditions tested. The non-infectivity ofFrankia on Betula protoplasts may also reflect difficulties inherent to thein vitro environment, which might not permit duplication of infection mechanisms.     

Electrofusion of protoplasts from Solanum tuberosum, S. nigrum and S. bulbocastanum

Leaf protoplasts of two wild species, Solanum nigrum var. gigantea (S. ngr gig) and S. bulbocastanum Dun. (S. blb), were electrofused with leaf protoplasts of two diploid potato clones, H-8105 and ZEL-1136, respectively, in order to confer the late blight-resistance from the wild species to the cultivated potato. The S. ngr gig mesophyll (+) H-8105 mesophyll combination resulted in regenerants of mostly normal ngr phenotype. Two regenerants from this combination were proved to be true hybrids by RAPD analysis but they rooted poorely in vitro and did not survive the transfer to soil. The S. ngr gig (+) H-8105 fusion combination was also performed with H-8105 cell suspension derived protoplasts enabling an easy identification of interspecific fusants on basis of their intermediate morphology. From the S. ngr gig mesophyll (+) H-8105 cultured cell combination, many abnormal shoots were regenerated. The two lines which survived had normal ngr phenotype but the presence of tuberosum (tbr) genome in those regenerants was not confirmed by RAPD analysis. No plants with tbr phenotype were obtained from both of S. ngr gig (+) H-8105 combinations. On the contrary, when S. blb mesophyll protoplasts were electrofused with ZEL-1136 mesophyll protoplasts, all regenerated plants had tbr phenotype, indicating much lower morphogenetic potential of S. bulbocastanum in comparison with that of S. nigrum var. gigantea. However, the hybridity of those regenerants has not been confirmed by RAPD analysis with two different primers. The efficiency of the applied fusion procedure and analysis of the regenerants is discussed.     

Microbiology in the 1990s: reflections about open questions and trends

The optimal conditions for protoplast formation ofCandida apicola were by using an enzyme fromArthrobacter sp. in combination with 2-mercaptoethanol. The kinetic data support the two-layered structure model of cell wall for this yeast but the structure of the cell wall depended on the age of cells and culture conditions. To regenerate the protoplasts, the type of osmotic stabilizer was important: sorbitol gave 16 to 30% regeneration. Electron microscopy revealed the presence of vesicles in the sections of protoplasts and whole cells ofCandida apicola grown in production medium and producing glycolipids. In sections of whole cells, vesicle-like structures are located in the periplasmic space and in protoplasts they can either be attached to, or released from, the cell surface. These vesicles are thought to be involved in the transport of the surface-active glycolipids and in the protection of the cell against denaturing effects.