Influence of phosphorus concentration on the growth kinetics and stoichiometry of the microalga Scenedesmus obliquus

The growth of the freshwater microalga Scenedesmus obliquus was studied at 30°C in a mineral culture medium with phosphorus concentrations of between 0 and 372 μ . The values for the specific growth rates, between and , fitted a semistructured substrate-limitation model with μ_m1 = 0·0466 h⁻¹, μ_m2 = 0·0256 h⁻¹ and . The specific uptake rate of phosphorus reached a maximum value of q_Sm1 = 658·01 × 10⁻⁴ μmol P mg⁻¹ biomass h⁻¹.     

Biphasic kinetics of Zn removal from Zn metallothionein by nitrilotriacetate are associated with differential reactivity of the two metal clusters

We investigated the kinetics of nitrilotriacetate (NTA) extraction of Zn²⁺ from Zn₇-metallothionein (MT) and a metal-hybrid derivative, Zn₄Ag₆MT, in which the Zn²⁺ and Ag⁺ ions occupy sites in the C-terminal and N-terminal β domains of the protein, respectively. Biphasic kinetics were observed for Zn₇MT under pseudo-first-order conditions. Rate constants were (5.2±0.6)×10⁻³ and (1.0±0.3)×10⁻⁴s⁻¹ in 20 mM phosphate, 100 mM KF, pH 7.5 at 23C. In contrast, Zn₄Ag₆MT showed a single kinetic step with a rate constant of (2.9±0.4)×10⁻³s⁻¹. These results indicate that the biphasic reactivity of Zn₇MT stems from differential susceptibility of the metal in the two metal–thiolate clusters to removal by competing ligands, with Zn²⁺ in the more stable -domain cluster reacting faster than that in the less stable β-domain cluster. Such behavior suggests that the structures of the two domains of mammalian MT may have evolved to assure that Cu binding does not compromise the structural characteristics that allow Zn to be rapidly transferred from MT to essential cellular ligands.     

Glutathione-proline activation of feeding behavior in the zoanthid Palythoa psammophilia Walsh & Bowers

Palythoa psammophilia Walsh & Bowers has a well coordinated, stereotyped feeding response, the culminating step of which is ingestion; this may be elicited by the synergistic effect of the tripeptide glutathione and the -imino acid, proline. Either activator acting separately causes responses only at high concentrations (above 10⁻⁵ M for glutathione; above 10⁻⁴ M for proline) in a reduced number of animals and at a low rate (5.00 ± 1.73 min in 5 × 10⁻³ M solutions of glutathione; 11.10±3.74 min in 5 × 10⁻³ M solutions of proline). Highest percentages of response were obtained in combinations where glutathione was at a concentration of 5 × 10⁻³ M and proline at 5 × 10⁻⁴ M or in combinations of glutathione at concentrations 5 × 10⁻⁶ M and proline at 5 × 10⁻⁵ M. The speed of ingestion is considerably enhanced when these activators are combined (1.17±1.18 min).     

Biocatalysis of tyrosinase using catechin as substrate in selected organic solvent media

The enzymatic activity of mushroom tyrosinase was investigated using catechin as substrate in selected organic solvent media. The results showed that optimal tyrosinase activity was obtained at pH 6.2, 6.6, 6.0 and 6.2 in the organic solvent media of heptane, toluene, dichloromethane, and dichloroethane, respectively, and at a temperature between 25°C and 27.5°C. In addition, the kinetic studies showed that the K_m values were 5.38, 1.03, 2.52 and 4.03 mM, for the tyrosinase-catechin biocatalysis in the reaction media of heptane, toluene, dichloromethane, and dichloroethane, respectively, while the corresponding V_max values were 1.22×10⁻³, 0.33×10⁻³, 1.47×10⁻³ and 1.20×10⁻³ δA per μg protein per second, respectively. The use of acetone as co-solvent for the tyrosinase-catechin biocatalysis showed that acetone concentrations ranging from 5% to 30% (v/v) in the heptane reaction medium produced a decrease of 4.3% to 96.7% in tyrosinase activity. The results also indicated that the presence of 12.5% acetone in the reaction medium of dichloromethane, and 22.0% in those of toluene and dichloroethane produced a maximal increase of 42.6%, 92.1% and 71.8%, respectively, in tyrosinase activity. However, the overall findings indicated that additional increases in acetone concentration resulted in an inhibition of tyrosinase activity.     

Properties of amino-terminal parathyroid hormone-related peptides modified at positions 11–13

Biological properties of amino-terminal PTHrP analogues modified in the region 11–13 were examined using ROS 17/2.8 cells. [Leu¹¹,D-Trp¹²,Arg¹³,Tyr³⁶]PTHrP(1–36)amide had a 17-fold lower binding affinity for the receptor (apparent K_d: 5 × 10⁻⁸ M) than [Tyr³⁶]PTHrP(1–36)amide or [Arg^11,13,Tyr³⁶]PTHrP(1–36)amide (apparent K_d for both: 2 × 10⁻⁹ M). Moreover, it is only a weak partial agonist despite completely inhibiting radioligand binding. [Leu¹¹,D-Trp¹²,Arg¹³,Tyr³⁶,Cys³⁸]PTHrP(7–38) and PTHrP(7–34)amide had similar receptor affinities (apparent K_ds: 5 × 10⁻⁸ M and 8 × 10⁻⁸ M), while that of [Nle^8,18,Tyr³⁴]bPTH(7–34)amide was more than 10-fold lower (apparent K_d: 2 × 10⁻⁶ M). These changes in biological properties suggest that high affinity receptor binding requires both amino- and carboxyl-terminal domains of the PTHrP(1–36) sequence and/or intramolecular interactions which are impaired by the D-Trp substitution for Gly¹².     

Graft copolymerization of acrylic acid onto guar gum initiated by vanadium (V)–mercaptosuccinic acid redox pair

Guar gum has been modified by graft copolymerization with acrylic acid in aqueous medium using vanadium (V)–mercaptosuccinic acid redox system. The optimum reaction conditions affording maximum grafting ratio, efficiency, add on and conversion have been determined. The grafting parameters have been found to increase with increase in vanadium (V) concentration upto 1.0 × 10⁻² mol dm⁻³, but these parameters decrease on further increasing the vanadium (V) concentration. On increasing the mercaptosuccinic acid concentration from 1.0 × 10⁻² to 4.0 × 10⁻² mol dm⁻³ grafting ratio, efficiency and add on increase up to 2.0 × 10⁻² mol dm⁻³ but decrease with further increase in mercaptosuccinic acid concentration. On varying the acrylic acid concentration from 5.0 × 10⁻² to 30.0 × 10⁻² mol dm⁻³, maximum grafting ratio, efficiency and add on have been obtained at 20.0 × 10⁻² mol dm⁻³. The grafting ratio, add on and conversion increase, on increasing the H⁺ ion concentration from 1.5 × 10⁻¹ to 6.0 × 10⁻¹ mol dm⁻³. On increasing the guar gum concentration the grafting parameters increase. The grafting ratio, add on and conversion have been found to increase with time period while efficiency started decreasing after 120 min. It has been observed that %G increases on increasing the temperature up to 35 °C. The graft copolymer has been characterized by IR spectroscopy and thermogravimetric analysis.     

Modulation by somatostatin of nerve-mediated activation of glycogenolysis in the perfused rat liver

Perivascular nerve stimulation of rat livers perfused in situ with erythrocyte-free Krebs-Henseleit buffer at constant pressure in a non-recirculating system resulted in an increase of glucose and lactate production and in a decrease of portal flow. Infusion of somatostatin in different concentrations (2 × 10⁻⁷, 10⁻⁸, 10⁻⁹ mol·l⁻¹) reduced the nerve-mediated activation of glucose release maximally to 66%. There was only a slight effect on the lactate output, the nerve-mediated reduction of portal flow was unaltered. In controls, somatostatin alone had no effect on the metabolic and hemodynamic parameters. In order to differentiate between a presynaptic and postsynaptic mechanism, the noradrenaline overflow was calculated. The unaltered release of the neurotransmitter in the presence or absence of somatostatin excluded a presynaptic mechanism. To mimic the nerve effects on the carbohydrate metabolism and on the hemodynamics, noradrenaline (2 × 10⁻⁷ mol·l⁻¹) was infused instead of the nerve stimulation over a period of 5 min. Somatostatin did not change the endocrine effects of the catecholamine under these conditions. The nerve-dependent effect of somatostatin suggests that other neurotransmitters (e.g. VIP) or mediators (e.g. prostanoids) may be influenced by somatostatin.     

Optimizing the formulation of a myoglobin molecularly imprinted thin-film polymer--formed using a micro-contact imprinting method

Thin-film myoglobin molecularly imprinted polymers have been fabricated using a micro-contact approach. By initially selecting the cross-linker on the basis of it having a minimal recognition for the template and using this as a starting point for functional monomer selection, we have produced myoglobin imprinted polymers with exceptionally high selectivities.

The affinity of the polymers, for myoglobin, when prepared with a variety of different cross-linkers and no functional monomer was evaluated. Of these, tetraethylene glycol dimethacrylate (TEGDMA) exhibited the lowest affinity for the template species. Methyl methacrylate (MMA) was chosen as the functional monomer as when it was used in conjunction with TEGDMA, it exhibited maximum selectivity for the template compared to polymers made with other functional monomers.

With a MMA to TEGDMA ratio of 1 to 3, the myoglobin molecularly imprinted polymer adsorbed 15.03 ± 0.89 × 10⁻¹¹ mole/cm² of template from a 5.68 × 10⁻⁷ M myoglobin solution, compared to 2.58 ± 0.02 × 10⁻¹¹ mole/cm² for a polymer of similar composition, but formed in the absence of a template. Various washing conditions, using alkaline media to remove the template, were investigated. An extraction solvent comprising 2 wt.% SDS and 0.6 wt.% NaOH used at 80 °C for 30 min was shown to give the highest imprinting factor i.e. 5.83 with 72.82% myoglobin removal.

The saturation kinetics of template binding to the thin-film MIP were examined and found to display a simple two-phase profile typical of non-cooperative binding. A Scatchard binding plot showed the dissociation constant (K_d) for the specific binding phase to be 3.4 × 10⁻⁷ M and the binding site capacity to be 7.24 × 10⁻¹¹ mole/cm². For the non-specific binding phase, K_d was found to be 1.355 × 10⁻⁵ M and the binding site capacity was determined as 9.62 × 10⁻¹⁰ mole/cm².

Selectivity experiments were carried out in both single protein and binary protein systems all using a total protein concentration of 5.68 × 10⁻⁷ M. The molar ratio of adsorbed myoglobin to IgG, HSA and hemoglobin was found to 115.5, 230.9 and 2.5, respectively. While, in binary competition systems, myoglobin selectivity to IgG, HSA and hemoglobin was, respectively, 94.18, 98.21 and 61.09%. Rebinding in natural biological matrices, i.e. human serum or urine, showed the imprinted films to have significantly greater uptake than non-imprinted films. Re-binding in undiluted urine was found to be a facile process, with the imprinting factor, i.e. the ratio of MIP to NIP binding, being determined as 37.4.     

Synthetic peptide analogs to barnacle settlement pheromone

Barnacle pheromone enhances the rate of settlement and metamorphosis of larvae of Balanus amphitrite Darwin. Analogs to the heterogeneous pheromone peptides were sought. Settlement assays were used to assess both the pheromone and the potential analogs. The pheromone has a lower threshold of activity at a concentration of 0.2 μg BSA protein equivalence l⁻¹. Treatment with carboxypeptidase eliminates biological activity. Series of dipeptides were tested to determine if dipeptides could promote settlement. Combinations of acidic, neutral, and basic amino acids in dipeptides were examined. Specific small peptides can mimic barnacle pheromone. Only peptides with a basic carboxy-terminal amino acid and either a neutral or a basic amino-terminal amino acid enhance settlement. Six peptides were shown to mimic pheromone activity at concentrations comparable to the native molecule. Some peptides were more potent than others. The most effective peptides were L-leucyl-L-arginine and L-histidyl-L-lysine which had a lower threshold of settlement enhancement of 2.0×10⁻¹⁰ M and caused a 130% increase in settlement rate at 2.0×10⁻⁸ M. Glycyl-glycyl-L-arginine, glycyl-L-histidyl-L-lysine, L-leucyl-glycyl-L-arginine and L-tyrosyl-L-arginine had thresholds between 2.0×10⁻⁸ M and 2.0×10⁻⁹ M. Peptide pheromone analogs should be useful in determining the nature and mechanism of barnacle pheromone receptor interactions.     

Aerobic treatment of black olive wastewater and the effect of an ozonation stage

The reduction of the pollutant organic matter present in wastewaters generated in the black olive production process is studied by an aerobic degradation, and by the combination of two successive steps: an ozonation pretreatment followed by an aerobic degradation. In the single aerobic process, in addition to the biomass evolution which is followed during each experiment, the removal of the pollutant load is evaluated by means of global parameters which are directly related with the organic matter, as the chemical oxygen demand and the total phenolic compounds content. A kinetic study is performed by using the Monod model, which applied to the experimental data, provides the specific kinetic parameters of this model: the kinetic constant for the substrate decomposition rate, the cellular yield coefficient and the kinetic constant for the biomass decrease during the death phase of microorganisms. In the combined process, an ozonation pretreatment is conducted with experiments where the ozone partial pressure is varied, and an important reduction in the phenolic compounds is achieved. The kinetic parameters of the following aerobic degradation stage are also evaluated, and the effect of the chemical oxidation pretreatment on this biological stage is discussed.     

Effect of nomegestrol acetate on estrone-sulfatase and 17β-hydroxysteroid dehydrogenase activities in human breast cancer cells

It is well recognized that estradiol (E₂) is one of the most important hormones supporting the growth and evolution of breast cancer. Consequently, to block this hormone before it enters the cancer cell or in the cell itself, has been one of the main targets in recent years. In the present study we explored the effect of the progestin, nomegestrol acetate, on the estrone sulfatase and 17β-hydroxy-steroid dehydrogenase (17β-HSD) activities of MCF-7 and T-47D human breast cancer cells. Using physiological doses of estrone sulfate (E₁S: 5 × 10⁻⁹ M), nomegestrol acetate blocked very significantly the conversion of E₁S to E₂. In the MCF-7 cells, using concentrations of 5 × 10⁻⁶ M and 5 × 10⁻⁵ M of nomegestrol acetate, the decrease of E₁S to E₂ was, respectively, −43% and −77%. The values were, respectively, −60% and −71% for the T-47D cells. Using E₁S at 2 × 10⁻⁶ M and nomegestrol acetate at 10⁻⁵ M, a direct inhibitory effect on the enzyme of −36% and −18% was obtained with the cell homogenate of the MCF-7 and T-47D cells, respectively. In another series of studies, it was observed that after 24 h incubation of a physiological concentration of estrone (E₁: 5 × 10⁻⁹ M) this estrogen is converted in a great proportion to E₂. Nomegestrol acetate inhibits this transformation by −35% and −85% at 5 × 10⁻⁷ M and 5 × 10⁻⁵ M, respectively in T-47D cells; whereas in the MCF-7 cells the inhibitory effect is only significant, −48%, at 5 × 10⁻⁵ M concentration of nomegestrol acetate. It is concluded that nomegestrol acetate in the hormone-dependent MCF-7 and T-47D breast cancer cells significantly inhibits the estrone sulfatase and 17β-HSD activities which converts E₁S to the biologically active estrogen estradiol. This inhibition provoked by this progestin on the enzymes involved in the biosynthesis of E₂ can open new clinical possibilities in breast cancer therapy.     

Synthesis of graft copolymer (k-carrageenan-g-N,N-dimethylacrylamide) and studies of metal ion uptake, swelling capacity and flocculation properties

Graft copolymer of k-carrageenan and N,N-dimethylacrylamide has been synthesized by free radical polymerization using peroxymonosulphate/glycolic acid redox pair in an inert atmosphere. The grafting parameters i.e. grafting ratio, add on and efficiency decrease with increase in concentration of k-carrageenan from 0.6 to 1.4 g dm⁻³ and hydrogen ion from 3 × 10⁻³ to 7 × 10⁻³ mol dm⁻³, but these grafting parameters increase with increase in concentration of N,N-dimethylacrylamide from 16 × 10⁻² to 32 × 10⁻² mol dm⁻³, and peroxymonosulphate from 0.8 × 10⁻² to 2.4 × 10⁻² mol dm⁻³. The metal ion sorption, swelling behaviour and flocculation properties have been studied. The intrinsic viscosity of pure and grafted samples has been measured by using Ubbelohde capillary viscometer. Flocculation capability of k-carrageenan and k-carrageenan-g-N,N-dimethylacrylamide for both coking and non-coking coals has been studied for the treatment of coal mine waste water. The graft copolymer has been characterized by Infrared (IR) spectroscopy and thermogravimetric analysis.     

Spectrophotometric and kinetic studies of the binding of Ni, Co, and Mg to poly(dG-dC) · poly(dG-dC). Determination of the stoichiometry of the Ni-induced B → Z transition

Data are reported for the binding of Ni²⁺, Co²⁺, and Mg²⁺ to the B-form of double-stranded poly(dG-dC) at ionic strength conditions I = 0.001 M, 0.01 M, and 0.1 M. The apparent binding constants for Ni²⁺ and Co²⁺ are about the same and are 2- to 3-fold higher than those for Mg²⁺. Kinetic studies indicate that Mg²⁺ binds to the polynucleotide mainly (or solely) as a mobile cloud (electrostatically, outer-sphere), whereas the transition metal ions undergo site binding (inner-sphere coordination) with poly(dG-dC). The kinetic data suggest that an Ni²⁺ ion coordinates to more than one binding site at the polynucleotide, presumably to G-N₇ and a phosphate group.

At low ionic strength conditions the addition of Ni²⁺ induces a B → Z conformational transition in poly(dG-dC). As demonstrated by UV absorption and CD spectroscopy, the transition occurs at I = 0.001 M already when 3 × 10⁻⁵ – 7 × 10⁻⁵ M of Ni²⁺ are added to 8 × 10⁻⁵ M (in monomeric units) of poly(dG-dC), and at I = 0.01 M between 2.5 × 10⁻⁴ and 4.5 × 10⁻⁴ M of Ni²⁺. Using murexide as an indicator of the concentration of free Ni²⁺ ions, the amount of Ni²⁺ which is bound to the polynucleotide could be determined. At I = 0.001 M it was established that the B → Z transition begins when 1 Ni²⁺ is bound coordinatively per four base pairs, and the transition is complete when 1 Ni²⁺ is bound coordinatively per three base pairs. It is this coordinated Ni²⁺ which induces the B → Z transition.     

Cortisol and testosterone: Inhibitory agents of the mineralocorticoid pathway. Is there a physiopathological meaning in adrenal tumors?

The authors incubated adrenal mitochondria to study the in vitro action of cortisol and testosterone on the transformation of corticosterone and 18-hydroxycorticosterone into aldosterone. The results show that cortisol at concentrations of 5 × 10⁻⁶ and 10⁻⁴ M inhibit the conversion of corticosterone into aldosterone by 23.6 to 90%; testosterone 5 × 10⁻⁵ and 10⁻⁴ M inhibit the reaction by 78.4 and 87.2%, respectively. The inhibition of the conversion of 18-hydroxycorticosterone into aldosterone is 12.5 to 91% by cortisol with concentrations ranging from 5 × 10⁻⁷ to 5 × 10⁻⁵ M and testosterone 5 × 10⁻⁵ and 10⁻⁴ M inhibits the reaction by 87.3 and 91%, respectively. Aldosterone (10⁻⁸ and 10⁻⁶ M) does not inhibit aldosterone biosynthesis from corticosterone or 18-hydroxycorticosterone. It thus appears that cortisol and testosterone have an effect on the aldosterone biosynthesis pathways in mitochondria. This action may be located at the binding site of the cytochrome P450 11β, which catalyzes all hydroxylation steps in the mineralocorticoid biosynthesis pathway. Because cortisol and testosterone may interfere with aldosterone biosynthesis, and since functional zonation is expected in adrenal carcinomas, the presence of these steroids in substantial amounts could explain the very low plasma aldosterone level usually observed, in adrenal carcinomas studies in our laboratory.     

Synthesis and inhibitory activity of optically active 2-benzyl-3-mercaptopropanoic acid against carboxypeptidase A

Both enantiomers of 2-benzyl-3-mercaptopropanoic acid were synthesized starting with racemic 3-acetylthio-2-benzylpropanoic acid methyl ester using a kinetic resolution with -chymotrypsin as a key step, and their inhibitory activities against carboxypeptidase A were determined to show that the S-isomer is much more potent (K_i = 7.8 × 10⁻⁹ M) than the racemic acid (K_i = 1.1 × 10⁻⁸ M).     

Direct glucose determination in blood using a reagentless optical biosensor

This paper demonstrates that glucose determination in blood can be done directly (without sample pretreatment) using a reagentless reversible biosensor based on the intrinsic spectroscopic properties of peroxidase (HRP). The biosensor, prepared by HRP and glucose oxidase entrapment in a polyacrylamide gel matrix, works in continuous mode, presents a linear response range from 1.5 × 10⁻⁶ up to 5.5 × 10⁻⁵ M and can be used for at least 750 measurements; in the best conditions (0.1 M pH 6 phosphate buffer, HRP and GOx amounts in the polymersation mixture for the sensor film preparation 0.0165 and 0.0010 g, respectively) the minimum samples rate is 30 h⁻¹. For glucose determination, blood is simply diluted in water (until haemolysis is completed) and fed into the sensor without a cleaning step between samples; the blood absorption is corrected in a simple way by working at a proper reference wavelength. The biosensor signals have been mathematically modeled in order to facilitate the design of sensors based on the same idea for other biochemical compounds.     

Kinetics of molecular weight reduction of poly(glutamic acid) by in situ depolymerization in cell-free broth of Bacillus subtilis

Poly(glutamic acid) (PGA) is a water soluble, biodegradable biopolymer that is produced by microbial fermentation. Recent research has shown that poly(glutamic acid) can be used in drug delivery applications for the controlled release of paclitaxel (Taxol) in cancer treatment. The molecular weight of microbial poly(glutamic acid) is generally larger than what is required for drug delivery. As such, molecular weight reduction is a necessary step in producing poly(glutamic acid) for this application. Poly(glutamic acid) produced by Bacillus subtilis IFO 3335 was subjected to in situ depolymerization in the cell-free fermentation broth. Molecular weight reduction was measured, and an empirical kinetic model was used to correlate the experimental data. The kinetic rate constant, k, was found to be 6.92 × 10⁻⁶ h⁻¹ at pH 7.0 and 37 °C, which were the optimum depolymerization conditions.     

Nitric oxide stimulates prostaglandin synthesis in cultured rabbit gastric cells

Both prostaglandins (PGs) and nitric oxide (NO) have cytoprotective and hyperemic effects in the stomach. However, the effect of NO on PG synthesis in gastric mucosal cells is unclear. We examined whether sodium nitroprusside (SNP), a releaser of NO, stimulates PG synthesis in cultured rabbit gastric mucus-producing cells. These cells did not release NO themselves. Co-incubation with SNP (2 × 10⁻⁴, 5 × 10⁻⁴, 10⁻³ M) increased PGE₂ synthesis, and SNP (10⁻³ M) increased PGI₂ synthesis in these cells. Hemoglobin, a scavenger of NO, (10⁻⁵ M) eliminated the increase in PGE₂ synthesis by SNP, but methylene blue, an inhibitor of soluble guanylate cyclase, (5 × 10⁻⁵ M) did not affect the increase in PGE₂ synthesis by SNP. 8-bromo guanosine 3′ : 5′-cyclic monophosphate (8-bromo cGMP), a cGMP analogue, (10⁻⁶, 10⁻⁵, 10⁻⁴, 10⁻³ M) did not affect PGE₂ synthesis. These findings suggest that NO increased PGE₂ and PGI₂ synthesis via a cGMP-independent pathway in cultured rabbit gastric cells.     

Continuous production of lactic acid from whey permeate by Lactobacillus helveticus in two chemostats in series

The effect of dilution rate on the production of lactic acid from whey permeate by Lactobacillus helveticus has been investigated. In the first chemostat of a two-stage system, total conversion (98.1%) and maximum lactic acid concentration (43.7 g l⁻¹) were obtained at a dilution rate (D_Itot) of 0.06 h⁻¹. Maximum volumetric productivities of lactic acid (8.27 g l⁻¹ h⁻¹) and biomass (1.90 g l⁻¹ h⁻¹) occurred at D_Itot of 0.40 h⁻¹. The fraction of -lactate in the product was found to increase with dilution rate and reached a maximum of 66% at the same dilution rate. The maximum specific growth rate (μ_max) on this medium was 0.7 h⁻¹. A Y_ATP (max) value of 22.4 g dry weight (mol ATP)⁻¹ and a maintenance coefficient of 8.0 mmol ATP (g dry weight h)⁻¹ were determined. The second stage, in series with the first, confirmed these results and further showed that the total residence time could be reduced by 50%, compared with a single chemostat for the same nearly complete level of substrate conversion.     

Displacement of [H]GABA binding to bovine brain receptors by sulfur-containing analogues

The displacement of [³H]GABA binding to GABA receptors of bovine brain cortical membranes by some sulfur-containing compounds (homothiotaurine, thiotaurine and carboxymethylcysteamine) was investigated and their potency was compared to that of other known sulfur-containing analogues of GABA, such as homotaurine, homohypotaurine and taurine. Displacement studies showed homotaurine to be more effective as a GABA displacer than homohypotaurine and homothiotaurine (IC₅₀: 3.9 × 10⁻⁸, 6.7 × 10⁻⁷ and 6.8 × 10⁻⁷ M, respectively). Saturation experiments showed that the effect of taurine, homothiotaurine, homotaurine and homohypotaurine was due to a loss of high-affinity GABA sites (K_d = 10.7 nM). Homotaurine seems also to interact with low-affinity sites, decreasing the affinity constant, whereas the number of binding sites remains unchanged.