Activity, specificity and structure of I-Bth0305I: a representative of a new homing endonuclease family

Novel family of putative homing endonuclease genes was recently discovered during analyses of metagenomic and genomic sequence data. One such protein is encoded within a group I intron that resides in the recA gene of the Bacillus thuringiensis 03058-36 bacteriophage. Named I-Bth0305I, the endonuclease cleaves a DNA target in the uninterrupted recA gene at a position immediately adjacent to the intron insertion site. The enzyme displays a multidomain, homodimeric architecture and footprints a DNA region of ~60 bp. Its highest specificity corresponds to a 14-bp pseudopalindromic sequence that is directly centered across the DNA cleavage site. Unlike many homing endonucleases, the specificity profile of the enzyme is evenly distributed across much of its target site, such that few single base pair substitutions cause a significant decrease in cleavage activity. A crystal structure of its C-terminal domain confirms a nuclease fold that is homologous to very short patch repair (Vsr) endonucleases. The domain architecture and DNA recognition profile displayed by I-Bth0305I, which is the prototype of a homing lineage that we term the 'EDxHD' family, are distinct from previously characterized homing endonucleases.     

An archaeal homing endonuclease I-PogI cleaves at the insertion site of the neighboring intron,which has no nested open reading frame

Homing endonucleases (HEs) of the LAGLIDADG family cleave intron/inteinless cognate DNA at, or near, the insertion site (IS) of their own intron/intein. Here, we describe a notable exception to this rule. Two introns, Pog.S1205 (length 32 bp) and Pog.S1213 (664 bp), whose ISs are 8 bp apart, exist within the 16S rRNA gene of the archaeon Pyrobaculum oguniense. Pog.S1213 harbors a nested open reading frame (ORF) encoding a 22 kDa monomeric protein, I-PogI, which contains two LAGLIDADG motifs and has optimal DNA cleavage activity at 90 degrees C. Intriguingly, I-PogI cleaves the Pog.S1205-less substrate DNA in the presence or absence of Pog.S1213. The cleavage site (CS) of I-PogI does not coincide with the IS of Pog.S1213 but with that of Pog.S1205. Thus, I-PogI activity both promotes the homing of its own intron, Pog.S1213, and guarantees co-conversion of the ORF-less intron Pog.S1205.     

A functional homing endonuclease in the Bacillus anthracis nrdE group I intron

The essential Bacillus anthracis nrdE gene carries a self-splicing group I intron with a putative homing endonuclease belonging to the GIY-YIG family. Here, we show that the nrdE pre-mRNA is spliced and that the homing endonuclease cleaves an intronless nrdE gene 5 nucleotides (nt) upstream of the intron insertion site, producing 2-nt 3' extensions. We also show that the sequence required for efficient cleavage spans at least 4 bp upstream and 31 bp downstream of the cleaved coding strand. The position of the recognition sequence in relation to the cleavage position is as expected for a GIY-YIG homing endonuclease. Interestingly, nrdE genes from several other Bacillaceae were also susceptible to cleavage, with those of Bacillus cereus, Staphylococcus epidermidis (nrdE1), B. anthracis, and Bacillus thuringiensis serovar konkukian being better substrates than those of Bacillus subtilis, Bacillus lichenformis, and S. epidermidis (nrdE2). On the other hand, nrdE genes from Lactococcus lactis, Escherichia coli, Salmonella enterica serovar Typhimurium, and Corynebacterium ammoniagenes were not cleaved. Intervening sequences (IVSs) residing in protein-coding genes are often found in enzymes involved in DNA metabolism, and the ribonucleotide reductase nrdE gene is a frequent target for self-splicing IVSs. A comparison of nrdE genes from seven gram-positive low-G+C bacteria, two bacteriophages, and Nocardia farcinica showed five different insertion sites for self-splicing IVSs within the coding region of the nrdE gene.     

Purification and characterization of the SegA protein of bacteriophage T4, an endonuclease related to proteins encoded by group I introns.

Although not encoded by an intron, the bacteriophage T4 SegA protein shares common amino acid motifs with a family of proteins found within mobile group I introns present in fungi and phage. Each of these intron-encoded proteins is thought to initiate the homing of its own intron by cleaving the intronless DNA at or near the site of insertion. Previously, we have found that SegA also cleaves DNA. In this report, we have purified the SegA protein and characterized this endonuclease activity extensively. SegA protein cleaved circular and linear plasmids, DNA containing unmodified cytosines, and wild-type T4 DNA containing hydroxymethylated, glucosylated cytosines. In all cases, certain sites on the DNA were highly preferred for cleavage, but with increasing protein concentration or time of incubation, cleavage occurred at many sites. SegA cleaving activity was stimulated by the presence of ATP or ATP gamma S. Sequence analysis of three highly preferred cleavage sites did not reveal a simple consensus sequence, suggesting that even among highly preferred sites, SegA tolerates many different sequences. A T4 segA amber mutant that we constructed had no phenotype, and PCR analyses indicated that several T-even-related phages lack the segA gene. Taken together, our results show that SegA is an endonuclease with a hierarchy of site specificity, and these results are consistent with the insertion of segA DNA into the T4 genome some time after the divergence of the closely consistent with the insertion of segA DNA into the T4 genome some time after the divergence of the closely related T-even phages.     

Double strand break-induced recombination in Chlamydomonas reinhardtii chloroplasts.

The mechanisms of chloroplast recombination are largely unknown. Using the chloroplast-encoded homing endonuclease I-CreI from Chlamydomonas reinhardtii, an experimental system is described that allows the study of double strand break (DSB)-induced recombination in chloroplasts. The I-CreI endonuclease is encoded by the chloroplast ribosomal group I intron of C.reinhardtii and cleaves specifically intronless copies of the large ribosomal RNA (23S) gene. To study DSB-induced recombination in chloroplast DNA, the genes encoding the I-CreI endonuclease were deleted and a target site for I-CreI, embedded in a cDNA of the 23S gene, was integrated at an ectopic location. Endonuclease function was transiently provided by mating the strains containing the recombination substrate to a wild-type strain. The outcome of DSB repair was analyzed in haploid progeny of these crosses. Interestingly, resolution of DSB repair strictly depended upon the relative orientation of the ectopic ribosomal cDNA and the adjacent copy of the 23S gene. Gene conversion was observed when the 23S cDNA and the neighbouring copy of the 23S gene were in opposite orientation, leading to mobilization of the intron to the 23S cDNA. In contrast, arrangement of the 23S cDNA in direct repeat orientation relative to the proximal 23S gene resulted in a deletion between the 23S cDNA and the 23S gene. These results demonstrate that C.reinhardtii chloroplasts have an efficient system for DSB repair and that homologous recombination is strongly stimulated by DSBs in chloroplast DNA.     

The nicking homing endonuclease I-BasI is encoded by a group I intron in the DNA polymerase gene of the Bacillus thuringiensis phage Bastille

Here we describe the discovery of a group I intron in the DNA polymerase gene of Bacillus thuringiensis phage Bastille. Although the intron insertion site is identical to that of the Bacillus subtilis phages SPO1 and SP82 introns, the Bastille intron differs from them substantially in primary and secondary structure. Like the SPO1 and SP82 introns, the Bastille intron encodes a nicking DNA endonuclease of the H-N-H family, I-BasI, with a cleavage site identical to that of the SPO1-encoded enzyme I-HmuI. Unlike I-HmuI, which nicks both intron-minus and intron-plus DNA, I-BasI cleaves only intron-minus alleles, which is a characteristic of typical homing endonucleases. Interestingly, the C-terminal portions of these H-N-H phage endonucleases contain a conserved sequence motif, the intron-encoded endonuclease repeat motif (IENR1) that also has been found in endonucleases of the GIY-YIG family, and which likely comprises a small DNA-binding module with a globular ββααβ fold, suggestive of module shuffling between different homing endonuclease families.     

Genetic Insertions and Diversification of the PolB-Type DNA Polymerase (gp43) of T4-Related Phages

In Escherichia coli phage T4 and many of its phylogenetic relatives, gene 43 consists of a single cistron that encodes a PolB family (PolB-type) DNA polymerase. We describe the divergence of this phage gene and its protein product (gp43) (gene product 43) among 26 phylogenetic relatives of T4 and discuss our observations in the context of diversity among the widely distributed PolB enzymes in nature. In two T4 relatives that grow in Aeromonas salmonicida phages 44RR and 25, gene 43 is fragmented by different combinations of three distinct types of DNA insertion elements: (a) a short intercistronic untranslated sequence (IC-UTS) that splits the polymerase gene into two cistrons, 43A and 43B, corresponding to N-terminal (gp43A) and C-terminal (gp43B) protein products; (b) a freestanding homing endonuclease gene (HEG) inserted between the IC-UTS and the 43B cistron; and (c) a group I intron in the 43B cistron. Phage 25 has all three elements, whereas phage 44RR has only the IC-UTS. We present evidence that (a) the split gene of phage 44RR encodes a split DNA polymerase consisting of a complex between gp43A and gp43B subunits; (b) the putative HEG encodes a double-stranded DNA endonuclease that specifically cleaves intron-free homologues of the intron-bearing 43B site; and (c) the group I intron is a self-splicing RNA. Our results suggest that some freestanding HEGs can mediate the homing of introns that do not encode their own homing enzymes. The results also suggest that different insertion elements can converge on a polB gene and evolve into a single integrated system for lateral transfer of polB genetic material. We discuss the possible pathways for the importation of such insertion elements into the genomes of T4-related phages.     

Genetic Analysis of the Chlamydomonas Reinhardtii I-Crei Mobile Intron Homing System in Escherichia Coli

We have developed and used a genetic selection system in Escherichia coli to study functional requirements for homing site recognition and cleavage by a representative eukaryotic mobile intron endonuclease. The homing endonuclease, I-CreI, was originally isolated from the chloroplast of the unicellular green alga Chlamydomonas reinhardtii. I-CreI homing site mutants contained base pair substitutions or single base deletions that altered the rate of homing site cleavage and/or product release. I-CreI endonuclease mutants fell into six phenotypic classes that differed in in vivo activity, toxicity or genetic dominance. Inactivating mutations clustered in the N-terminal 60% of the I-CreI amino acid sequence, and two frameshift mutations were isolated that resulted in premature translation termination though retained partial activity. These mutations indicate that the N-terminal two-thirds of the I-CreI endonuclease is sufficient for homing site recognition and cleavage. Substitution mutations altered in four potential active site residues were examined: D20N, Q47H or R70A substitutions inactivated endonuclease activity, whereas S22A did not. The genetic approach we have taken complements phylogenetic and structural studies of mobile intron endonucleases and has provided new information on the mechanistic basis of I-CreI homing site recognition and cleavage.     

The evolution of homing endonuclease genes and group I introns in nuclear rDNA

Group I introns are autonomous genetic elements that can catalyze their own excision from pre-RNA. Understanding how group I introns move in nuclear ribosomal (r)DNA remains an important question in evolutionary biology. Two models are invoked to explain group I intron movement. The first is termed homing and results from the action of an intron-encoded homing endonuclease that recognizes and cleaves an intronless allele at or near the intron insertion site. Alternatively, introns can be inserted into RNA through reverse splicing. Here, we present the sequences of two large group I introns from fungal nuclear rDNA, which both encode putative full-length homing endonuclease genes (HEGs). Five remnant HEGs in different fungal species are also reported. This brings the total number of known nuclear HEGs from 15 to 22. We determined the phylogeny of all known nuclear HEGs and their associated introns. We found evidence for intron-independent HEG invasion into both homologous and heterologous introns in often distantly related lineages, as well as the "switching" of HEGs between different intron peripheral loops and between sense and antisense strands of intron DNA. These results suggest that nuclear HEGs are frequently mobilized. HEG invasion appears, however, to be limited to existing introns in the same or neighboring sites. To study the intron-HEG relationship in more detail, the S943 group I intron in fungal small-subunit rDNA was used as a model system. The S943 HEG is shown to be widely distributed as functional, inactivated, or remnant ORFs in S943 introns.     

Crystallization and preliminary X-ray studies of I-PpoI: a nuclear, intron-encoded homing endonuclease from Physarum polycephalum.

The homing endonuclease I-PpoI is encoded by an optional third intron, Pp LSU 3, found in nuclear, extrachromosomal copies of the Physarum polycephalum 26S rRNA gene. This endonuclease promotes the lateral transfer or "homing" of its encoding intron by recognizing and cleaving a partially symmetric, 15 bp homing site in 26S rDNA alleles that lack the Pp LSU 3 intron. The open reading frame encoding I-PpoI has been subcloned, and the endonuclease has been overproduced in E. coli. Purified recombinant I-PpoI has been co-crystallized with a 21 bp homing site DNA duplex. The crystals belong to space group P3(1)21, with unit cell dimensions a = b = 114 A, c = 89 A. The results of initial X-ray diffraction experiments indicate that the asymmetric unit contains an enzyme homodimer and one duplex DNA molecule, and that the unit cell has a specific volume of 3.4 A3/dalton. These experiments also provide strong evidence that I-PpoI contains several bound zinc ions as part of its structure.     

Purification and characterization of the DNA cleavage and recognition site of I-ScaI mitochondrial group I intron encoded endonuclease produced in Escherichia coli

The second intron in the mitochondrial cytb gene of Saccharomyces capensis, belonging to group I, encodes a 280 amino acid protein containing two LAGLIDADG motifs. Genetic and molecular studies have previously shown that this protein has a dual function in the wild-type strain. It acts as a specific homing endonuclease I-ScaI promoting intron mobility and as a maturase promoting intron splicing. Here we describe the synthesis of a universal code equivalent to the mitochondrial sequence coding for this protein and the in vitro characterization of I-ScaI endonuclease activity, using a truncated mutant form of the protein p28bi2 produced in Escherichia coli. We have also determined the cleavage pattern as well as the recognition site of p28bi2. It was found that p28bi2 generates a double-strand cleavage downstream from the intron insertion site with 4 nt long 3′-overhangs. Mutational analysis of the DNA target site shows that p28bi2 recognizes a 16–19 bp sequence from positions –11 to +8 with respect to the intron insertion site.     

I-OmiI and I-OmiII: Two intron-encoded homing endonucleases within the Ophiostoma minus rns gene

The mitochondrial small subunit ribosomal RNA (rns) gene of the ascomycetous fungus Ophiostoma minus [strain WIN(M)371] was found to contain a group IC2 and a group IIB1 intron at positions mS569 and mS952 respectively. Both introns have open reading frames (ORFs) embedded that encode double motif LAGLIDADG homing endonucleases (I-OmiI and I-OmiII respectively). Codon-optimized versions of I-OmiI and I-OmiII were synthesized for overexpression in Escherichia coli. The in vitro characterization of I-OmiII showed that it is a functional homing endonuclease that cleaves the rns target site two nucleotides upstream (sense strand) of the intron insertion site generating 4 nucleotide 3′ overhangs. The endonuclease activity of I-OmiII was tested using linear and circular substrates and cleavage activity was evaluated at various temperatures. The I-OmiI protein was expressed in E. coli, but purification was difficult, thus the endonuclease activity of this protein was tested via in vivo assays. Overall this study showed that there are many native forms of functional homing endonucleases yet to be discovered among fungal mtDNA genomes.     

The I-CeuI endonuclease recognizes a sequence of 19 base pairs and preferentially cleaves the coding strand of the Chlamydomonas moewusii chloroplast large subunit rRNA gene.

The I-CeuI endonuclease is a member of the growing family of homing endonucleases that catalyse mobility of group I introns by making a double-strand break at the homing site of these introns in cognate intronless alleles during genetic crosses. In a previous study, we have shown that a short DNA fragment of 26 bp, encompassing the homing site of the fifth intron in the Chlamydomonas eugametos chloroplast large subunit rRNA gene (Ce LSU.5), was sufficient for I-CeuI recognition and cleavage. Here, we report the recognition sequence of the I-CeuI endonuclease, as determined by random mutagenesis of nucleotide positions adjacent to the I-CeuI cleavage site. Single-base substitutions that completely abolish endonuclease activity delimit a 15-bp sequence whereas those that reduce the cleavage rate define a 19-bp sequence that extends from position -7 to position +12 with respect to the Ce LSU.5 intron insertion site. As the other homing endonucleases that have been studied so far, the I-CeuI endonuclease recognizes a non-symmetric degenerate sequence. The top strand of the recognition sequence is preferred for I-CeuI cleavage and the bottom strand most likely determines the rate of double-strand breaks.     

Cleavage and recognition pattern of a double-strand-specific endonuclease (I-creI) encoded by the chloroplast 23S rRNA intron of Chlamydomonas reinhardtii.

Several group-I introns have been shown to specifically invade intron-minus alleles of the genes that contain them. This type of intron mobility is referred to as 'intron homing', and depends on restriction endonucleases (ENases) encoded by the mobile introns. The ENase cleaves the intron-minus allele near the site of intron insertion, thereby initiating gene conversion. The 23S (LSU) rRNA-encoding gene (LSU) of the chloroplast genome of Chlamydomonas reinhardtii contains a self-splicing group-I intron (CrLSU) that has a free-standing open reading frame (ORF) of 163 codons. Translation of CrLSU intron RNA in cell-free systems produces a polypeptide of approx. 18 kDa, the size expected for correct translation of the ORF. The in vitro-synthesized 18-kDa protein cleaves plasmid DNA that contains a portion of LSU where the intron normally resides, but lacking the intron itself. Cleavage by the intron-encoded enzyme (I-CreI) occurs 5 bp and 1 bp 3' to the intron insertion site (in the 3'-exon) in the top (/) and bottom (,) strands, respectively, resulting in 4-nt single-stranded overhangs with 3'-OH termini. We also show that the recognition sequence of I-CreI spans the cleavage site and is 24 bp in length (5'-CAAAACGTC,GTGA/GACAGTTTGGT).     

Protein footprinting approach to mapping DNA binding sites of two archaeal homing enzymes: evidence for a two-domain protein structure.

The archaeal intron-encoded homing enzymes I-PorI and I-DmoI belong to a family of endonucleases that contain two copies of a characteristic LAGLIDADG motif. These endonucleases cleave their intron- or intein- alleles site-specifically, and thereby facilitate homing of the introns or inteins which encode them. The protein structure and the mechanism of DNA recognition of these homing enzymes is largely unknown. Therefore, we examined these properties of I-PorI and I-DmoI by protein footprinting. Both proteins were susceptible to proteolytic cleavage within regions that are equidistant from each of the two LAGLIDADG motifs. When complexed with their DNA substrates, a characteristic subset of the exposed sites, located in regions immediately after and 40-60 amino acids after each of the LAGLIDADG motifs, were protected. Our data suggest that the enzymes are structured into two, tandemly repeated, domains, each containing both the LAGLIDADG motif and two putative DNA binding regions. The latter contains a potentially novel DNA binding motif conserved in archaeal homing enzymes. The results are consistent with a model where the LAGLIDADG endonucleases bind to their non-palindromic substrates as monomeric enzymes, with each of the two domains recognizing one half of the DNA substrate.