土生鳞伞对Cd2+的吸附特性

以土生鳞伞（Pholiota terrestris Overh.）子实体为生物吸附剂吸附水溶液中的Cd2+,分析吸附剂用量、初始pH值、初始重金属浓度、反应时间这4个因素对吸附的影响,并采用Langmuir和Freundlich等温吸附模型及准一级、准二级动力学模型拟合土生鳞伞的生物吸附特性.结果表明:水溶液中Cd2+...     

微藻对污水中重金属的生物吸附(英文)

在我国,水源污染问题异常突出,特别是水体重金属污染情况非常严重,因此,如何有效治理水体重金属污染成为了摆在科技工作者面前十分紧迫的任务。利用微藻生物吸附来治理水体重金属污染是一种经济、简便、有效可行的方法,具有极其广阔的应用前景。论文介绍了我国近年水体污染的状况及水体重金属污染特点;综述了水体重金属污染对水体植物、水体动物以及人类潜在的危害;比较了几种常见治理重金属污染的方法;分析了微藻吸附水体重金属的优点,并阐述了微藻对重金属生物吸附的机理及影响生物吸附过程的外在因素;最后提出了今后的研究发展方向。     

胶质芽孢杆菌对Zn2+、Cd2+的生物吸附

目的:考察胶质芽孢杆菌对Cd2 、Zn2 的耐受能力.方法:通过改变培养条件及吸附条件研究胶质芽孢杆菌对Cd2 、Zn2 的生物吸附性能.在此实验基础上,在含有Cd2 、Zn2 的培养基中对胶质芽孢杆菌进行不同浓度梯度驯化,提高其对Cd2 Zn2 的生物富集能力.结果:胶质芽孢杆菌最大Cd2 耐受浓度在100mg·L-1左右,最大Zn2 耐受浓度在100～110mg·L-1.通过改变吸附条件,考察吸附时间、吸附pH值、菌体投加量对其生物吸附性能的影响,结果表明:当Cd2 、Zn2 浓度均为5mmol·L-1,菌投量分别为40.0gdry cell·L-1、29.8gdry cell·L-1时,胶质芽孢杆菌对Cd2 、zn2 的吸附率分别可达87.45%、97.50%.胶质芽孢杆菌经重金属离子浓度梯度驯化培养数代,经过8、9代的驯化,对Cd2 、Zn2 吸附性能均有改善.结论:胶质芽孢杆菌经过驯化,在适宜的吸附条件下可以对Cd2 、Zn2 进行有效的生物吸附,在处理重金属离子废水方面有潜在的应用前景.     

黏土矿物中重金属离子的吸附规律及竞争吸附

采用等温吸附法,研究了重金属铜、铅、镉、镍在膨润土中的吸附特征,发现膨润土对铜、铅的吸附明显强于镉、镍,吸附强度大小顺序为Pb2 >Cu2 >Ni2 >Cd2 。Langmuir和Freundlich方程对这4种金属离子等温吸附的拟合均呈极显著关系。Pb2 、Cd2 、Ni2 分别与Cu2 的双组分竞争吸附表明,黏土矿物对4种离子具有"选择性吸附"。在Pb2 、Ni2 、Cd2 的存在条件下,黏土矿物对Cu2 的吸附产生不同程度的下降;100mg/LCu2 对Pb2 的影响不大,但可完全抑制Ni2 、Cd2 的吸附。建立了IAS和LCA模型来预测Pb2 与Cu2 的双组分竞争吸附,并对LCA模型进行修正,提出了更符合实际情况的竞争吸附模型。文章最后用LCA修正模型对Pb2 与Cu2 的双组分竞争吸附进行了模拟。     

固定化海洋微藻对污水中Ni2+的吸附

采用海藻酸钠包埋小球藻和叉鞭金藻,制得含藻细胞的固定化胶球,用其对Ni^2 进行生物吸附,研究了固定化小球藻和固定化叉鞭金藻对污水中Ni^2 的吸附率。结果表明：对于同一种固定化微藻,处于对数生长中期时对Ni^2 吸附效果较好,且吸附过程主要在前4h完成;Ni^2 浓度越大,吸附率越高;固定化微藻比悬浮态微藻吸附率高;在相同的实验条件下,固定化小球藻比固定化叉鞭金藻吸附率高。     

小球藻对水溶液中Zn2+、Cd2+的吸附

对小球藻生物吸附Zn^2 ,Cd^2 的影响因素进行了研究,发现小球藻对Zn^2 ,Cd^2 的生物吸附主要经历了快速的物理吸附和缓慢的化学吸附两个步骤;pH值是影响Zn^2 ,Cd^2 生物吸附的一个重要因素,pH值为6-7时,小球藻对Zn^2 ,Cd^2 的去除率较高,在实验条件下去除率可达87%以上;研究还表明,小球藻干粉比新鲜藻能富集更多的Zn^2 ,Cd^2 。用Freundlich方程模拟吸附等温线,拟合良好。     

细菌吸附Pd2+的研究

从不同来源的细菌菌株中筛选获得一株吸附Ｐｄ＾２＋能力较强的菌株Ｒ０８,经鉴定为地衣芽孢杆菌（Ｂａｃｉｌｌｕｓ ｌｉｃｈｅｎｉｆｏｒｍｉｓ）Ｒ０８。Ｒ０８死菌体吸附Ｐｄ＾２＋的最适ｐＨ值３．５,其吸附作用是一种快速而非依赖温度的过程。吸附作用受菌体浓度和Ｐｄ＾２＋浓度影响。在起始Ｐｄ＾２＋浓度２００ｍｇ／Ｌ、菌浓度０．４ｇ／Ｌ、ｐＨ３．５和３０℃条件下,吸附４５ｍｉｎ,吸附量为２２４．８ｍｇ／ｇ。透     

废啤酒酵母吸附水溶液中Cu2+的性能及机理研究

用废啤酒酵母吸附水溶液中Cu2+,考察了溶液pH值、Cu2+浓度和吸附时间对Cu2+吸附的影响。结果表明：废啤酒酵母吸附Cu2+在4-6个小时内达到吸附平衡,酸性条件利于吸附,以pH为5时最佳,吸附等温曲线符合Langmuir模式。用电位滴定及FTIR分析的方法确定生物吸附剂主要含有磺酸基、羧基及氨基等功能团。生物吸附剂对Cu2+的吸附以单分子层的化学吸附为主,功能团在不同的pH条件下呈现不同的电离性能,在吸附过程中发挥重要作用。     

根霉吸附水体中重金属铬与吸附机理的研究

以根霉RhizopusLH2死菌体为吸附剂进行水体中六价铬的吸附研究.结果表明,Cr(VI)的生物吸附最优条件为:温度28℃,pH为2;线性回归相关系数为0.98,符合Langmuir吸附等温线模型;傅立叶红外变换光谱分析推断吸附机理为质子化氨基在Cr(VI)的生物吸附中起主要作用.     

球衣菌对工业废水中Cu2+吸附条件的研究

利用球衣菌FQ32制备生物吸附剂,研究其对Cu^2＋的耐受能力,并以连江某工厂含Cu^2＋废水为样液,对其进行吸附条件试验,分析了影响吸附率和吸附量的因素,结果表明,球衣菌FQ32对Cu^2＋的耐受能力大于150mg／L。在工业废水中Cu^2＋的浓度为23．1mg／L,吸附剂用量为0．2g／L,30℃,pH值6．0,吸附时间10min的条件下,该吸附剂对Cu^2＋的吸附率达到85．2％,吸附量达91．21mg／g。     

Bioremoval of heavy metals by the use of microalgae

Bioremoval, the use of biological systems for the removal of metal ions from polluted waters, has the potential to achieve greater performance at lower cost than conventional wastewater treatment technologies for metal removal. Bioremoval capabilities of microalgae have been extensively studied, and some commercial applications have been initiated. Although microalgae are not unique in their bioremoval capabilities, they offer advantages over other biological materials in some conceptual bioremoval process schemes. Selected microalgae strains, purposefully cultivated and processed for specific bioremoval applications, have the potential to provide significant improvements in dealing with the world-wide problems of metal pollution. In addition to strain selection, significant advances in the technology appear possible by improving biomass containment or immobilization techniques and by developing bioremoval process steps utilizing metabolically active microalgae cultures. The latter approach is especially attractive in applications where extremely low levels of residual metal ions are desired. This review summarizes the current literature, highlighting the potential benefits and problems associated with the development of novel algal-based bioremoval processes for the abatement of heavy metal pollution.     

霉菌吸附重金属离子的研究进展

介绍了目前国内外采用霉菌吸附分离废水中重金属离子的研究情况,总结了不同霉菌的吸附能力,讨论了霉菌吸附重金属离子的影响因素、机理以及固定化技术,最后展望了霉菌吸附重金属的发展趋势.     

Chitin nanofibrils for rapid and efficient removal of metal ions from water system

Joint mechanical defibrillation was successfully used to downsize chitin micro-particles (CMP) into nanofibrils without changing its chemical or crystalline structure. The fine chitin nanofibrils (CNF) bearing width of about 50 nm and length of more than 1 μm were then developed as heavy metal ion sorbents. The uptake performance of CNF dependent on pH, ionic concentration, time, and temperature was investigated. Results show that fixation amount of Cd(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III) on CNF was up to 2.94, 2.30, 2.22, 2.06, 1.46, and 0.31 mmol/g, respectively, much higher than CMP due to high specific surface area and widely distributed pores of CNF. Adsorption kinetics of CMP and CNF followed pseudo-second-order model and Freundlich isotherm although CNF exhibited higher rate constant and sorption capacity than that of CMP. The defibrillated CNF is renewable, feasible, easily recyclable, and is thought as good candidate for heavy metal ion treatment due to their low sorption energy, rapid and efficient uptake capacity.     

CadA, the Cd2+-ATPase from Listeria monocytogenes, can use Cd2+ as co-substrate

CadA is a membrane protein of the P-type ATPase family which is the major determinant of the resistance to Cd2+ in Listeria monocytogenes. During its catalytic cycle, CadA undergoes auto-phosphorylation from ATP at Asp398, which allows Cd2+ translocation across the membrane. In the reverse mode, Asp398 is phosphorylated from Pi. From the data obtained so far, the CadA catalytic mechanism is similar to that proposed for the sarcoplasmic reticulum Ca2+-ATPase, the model of the P-type ATPase family. We show here that CadA is sensitive to two different ranges of Cd2+ concentration. The 0.1-10 microM range of added CdCl2 corresponds to Cd2+ binding at the transport site of unphosphorylated CadA which induces the reaction of the enzyme with ATP and impairs its reaction with Pi. The 0.1-1 mM range of added CdCl2 could correspond to Cd2+ binding to the transport site accessible from the extracellular medium. In addition, although it is widely accepted that the actual substrate of P-type ATPases is the MgATP complex, we show here that CadA can also perform its cycle in the absence of Mg2+, using CdATP in the place of MgATP at the catalytic site.     

Biosorption of heavy metals by Bacillus thuringiensis strain OSM29 originating from industrial effluent contaminated north Indian soil

The study was navigated to examine the metal biosorbing ability of bacterial strain OSM29 recovered from rhizosphere of cauliflower grown in soil irrigated consistently with industrial effluents. The metal tolerant bacterial strain OSM29 was identified as Bacillus thuringiensis following 16S rRNA gene sequence analysis. In the presence of the varying concentrations (25–150 mgl⁻¹) of heavy metals, such as cadmium, chromium, copper, lead and nickel, the B. thuringiensis strain OSM29 showed an obvious metal removing potential. The effect of certain physico-chemical factors such as pH, initial metal concentration, and contact time on biosorption was also assessed. The optimum pH for nickel and chromium removal was 7, while for cadmium, copper and lead, it was 6. The optimal contact time was 30 min. for each metal at 32 ± 2 °C by strain OSM29. The biosorption capacity of the strain OSM29 for the metallic ions was highest for Ni (94%) which was followed by Cu (91.8%), while the lowest sorption by bacterial biomass was recorded for Cd (87%) at 25 mgl⁻¹ initial metal ion concentration. The regression coefficients obtained for heavy metals from the Freundlich and Langmuir models were significant. The surface chemical functional groups of B. thuringiensis biomass identified by Fourier transform infrared (FTIR) were amino, carboxyl, hydroxyl, and carbonyl groups, which may be involved in the biosorption of heavy metals. The biosorption ability of B. thuringiensis OSM29 varied with metals and was pH and metal concentration dependent. The biosorption of each metal was fairly rapid which could be an advantage for large scale treatment of contaminated sites.     

乳酸菌对重金属吸附作用的研究进展

重金属污染是人们关注的食品安全问题热点之一,使用食品安全级乳酸菌吸附重金属成为了新的研究方向。本文在分析环境和食品中汞、镉、铅污染的来源及对人类危害的基础上,对微生物与重金属的相互作用进行介绍,重点归纳了乳酸菌作为重金属吸附剂的潜能,以及吸附重金属的作用机制和研究现状,为研发高效吸附重金属的乳酸菌吸附剂提供了可行性的思路。     

Mutations in dsbA and dsbB, but not dsbC, lead to an enhanced sensitivity of Escherichia coli to Hg2+ and Cd2+

The Dsb proteins are involved in disulfide bond formation, reduction and isomerisation in a number of Gram-negative bacteria. Mutations in dsbA or dsbB, but not dsbC, increase the proportion of proteins with free thiols in the periplasm compared to wild-type. We investigated the effects of mutations in these genes on the bacterial resistance to mercuric and cadmium salts. Mutations in genes involved primarily in disulfide formation (dsbA and dsbB) generally enhanced the sensitivity to Hg2+ and Cd2+ while a mutation of the dsbC gene (primarily an isomerase of disulfide bonds) had no effect. Mutations of the dsb genes had no effect on the expression of the mercury-resistance determinants of the transposon Tn501.     

Biosorption of three textile dyes from contaminated water by filamentous green algal Spirogyra sp.: Kinetic,isotherm and thermodynamic studies

A freshwater filamentous green alga Spirogyra sp. was used as an inexpensive and efficient biosorbent for the removal of C.I. Acid Orange 7 (AO7), C.I. Basic Red 46 (BR46) and C.I. Basic Blue 3 (BB3) dyes from contaminated water. The effects of various physico–chemical parameters on dye removal efficiency were investigated, e.g. contact time, pH, initial dyes concentration, the amount of alga, temperature and biosorbent particle size. Dyes biosorption was a quick process and reactions reached to equilibrium conditions within 60 min. The biosorption capacity of three dyes onto alga was found in the following order: BR46 > BB3> AO7. The values of thermodynamic parameters, including ΔG, ΔH and ΔS, indicated that the biosorption of the dyes on the dried Spirogyra sp. biomass was feasible, spontaneous and endothermic. The pseudo-first order, pseudo-second order and the intraparticle diffusion models were applied to the experimental data in order to kinetically describe the removal mechanism of dyes, with the second one showing the best fit with the experimental kinetic biosorption data (R² = 0.99). It was also found that the adsorption process followed the Freundlich isotherm model with the highest value of correlation coefficients (0.99) and the biosorption capacity being estimated to be 13.2, 12.2 and 6.2 mg g⁻¹ for BR46, BB3 and AO7, respectively.     

Equilibrium and kinetics studies of heavy metal ions biosorption on green algae waste biomass

The biosorption of Pb(II), Cd(II), and Co(II), respectively, from aqueous solution on green algae waste biomass was investigated. The green algae waste biomass was obtained from marine green algae after extraction of oil, and was used as low-cost biosorbent. Batch shaking experiments were performed to examine the effects of initial solution pH, contact time and temperature. The equilibrium biosorption data were analyzed using two isotherm models (Langmuir and Freundlich) and two kinetics models (pseudo-first order and pseudo-second order). The results indicate that Langmuir model provide best correlation of experimental data, and the pseudo-second order kinetic equation could best describe the biosorption kinetics of considered heavy metals.     

Biodegradation of phenols by microalgae

Two green microalgae, Ankistrodesmus braunii and Scenedesmus quadricauda, degraded phenols (each tested at 400 mg ml^–1) selected from olive-oil mill wastewaters, within 5 days, with a removal greater than 70%. Green algae may, therefore, represent an alternative to other biological treatment used for the biodegradation of phenol-containing wastewaters.