Regularly alternating L,D-peptides. II. The double-stranded right-handed antiparallel beta-helix in the structure of t-Boc-(L-Phe-D-Phe)4-OMe

The crystal structure of Boc-(L-Phe-D-Phe)4-OMe has been determined by x-ray diffraction analysis. The peptide crystallizes in the triclinic system, space group P1 with a = 15.290 A, b = 15.163 A, c = 19.789 A, alpha = 102.49 degrees, beta = 96.59 degrees, gamma = 74.22 degrees, and Z = 2. The structure has been solved by coupling of the molecular replacement technique and expansion by tangent formula refinement of the set of known phases. Several cycles of Fourier calculations and least-squares refinement led to the location of 194 atoms of the two independent octapeptide chains and few molecules of cocrystallized solvent (chloroform, water, and methanol). The isotropic refinement converged to R = 0.13 for the 3077 "observed" reflections. The two independent octapeptide molecule form a dimer in the solid state: the two chains are associated by interstrand hydrogen bonds (12 of the type N-H ... O = C) with the formation of a double-stranded antiparallel right-handed -- beta 5.6-helix. These double helices can be represented as a cylinder with a hydrophilic inner core represented by the peptide units and an hydrophobic exterior constituted by the aromatic moieties. The dimensions of the cylinder are equal to those observed for Boc-(L-Val-D-Val)4-OMe. In the solid state the dimers pack with each other in an hexagonal fashion with the formation of layers; between the layers, solvent molecules fill empty spaces.     

Conformation and inhibitory properties of peptides based on the tissue kallikrein-aprotinin complex.

A series of peptides encompassing the primary binding segment (residues 12-19) of aprotinin has been synthesized and tested for their ability to inhibit porcine pancreatic kallikrein. A minimum sequence of five amino acids spanning residues 12-16 of aprotinin is necessary for inhibition of porcine pancreatic kallikrein. An octapeptide homologous with the binding segment of aprotinin has a Ki-value of 1.2 x 10(-4) M. The solution structure of the octapeptide was studied by one- and two-dimensional NMR methods for comparison with the known structure of the segment of aprotinin that contacts tissue kallikrein. NMR experiments suggest that the peptide is either a random coil or that it samples several conformations on the NMR time scale. Analysis of the molecular dynamics trajectory of the octapeptide also suggests that the peptide is highly flexible. Thus, inhibition by the octapeptide occurs because of its homology with residues 12-19 of aprotinin. Moreover, the absence of a stable solution conformation similar to that of the binding segment of aprotinin is consistent with the 150,000-fold increase in Ki of the octapeptide compared to intact aprotinin.     

Size and shape of the repetitive domain of high molecular weight wheat gluten proteins. I. Small-angle neutron scattering

The solution structure of the central repetitive domain of high molecular weight (HMW) wheat gluten proteins has been investigated for a range of concentrations and temperatures using mainly small-angle neutron scattering. A representative part of the repetitive domain (dB1) was studied as well as an "oligomer" basically consisting of four dB1 units, which has a length similar to the complete central domain. The scattering data over the entire angular range of both proteins are in quantitative agreement with a structural model based on a worm-like chain, a model frequently used in polymer theory. This model describes the "supersecondary structure" of dB1 and dB4 as a semiflexible cylinder with a length of about 235 and 900 A, respectively, and a cross-sectional diameter of about 15 A. The flexibility of both proteins is characterized by a persistence length of about 13 A. Their structures are thus quantitatively identical, which implies that the central HMW domain can be elongated while retaining its structural characteristics. It seems conceivable that the flexible cylinder results from a helical structure, which resembles the beta-spiral observed in earlier studies on gluten proteins and elastin. However, compared to the previously proposed structure of a (stiff) rod, our experiments clearly indicate flexibility of the cylinder.     

Crystal structure of the E. coli dipeptidyl carboxypeptidase Dcp: further indication of a ligand-dependent hinge movement mechanism

Dcp from Escherichia coli is a 680 residue cytoplasmic peptidase, which shows a strict dipeptidyl carboxypeptidase activity. Although Dcp had been assigned to the angiotensin I-converting enzymes (ACE) due to blockage by typical ACE inhibitors, it is currently grouped into the M3 family of mono zinc peptidases, which also contains the endopeptidases neurolysin and thimet oligopeptidase (TOP). We have cloned, expressed, purified, and crystallized Dcp in the presence of an octapeptide "inhibitor", and have determined its 2.0A crystal structure using MAD methods. The analysis revealed that Dcp consists of two half shell-like subdomains, which enclose an almost closed two-chamber cavity. In this cavity, two dipeptide products presumably generated by Dcp cleavage of the octapeptide bind to the thermolysin-like active site fixed to side-chains, which are provided by both subdomains. In particular, an Arg side-chain backed by a Glu residue, together with two Tyr phenolic groups provide a charged anchor for fixing the C-terminal carboxylate group of the P2' residue of a bound substrate, explaining the strict dipeptidyl carboxypeptidase specificity of Dcp. Tetrapeptidic substrates are fixed only via their main-chain functions from P2 to P2', suggesting a broad residue specificity for Dcp. Both subdomains exhibit very similar chain folds as the equivalent but abducted subdomains of neurolysin and TOP. Therefore, this "product-bound" Dcp structure seems to represent the inhibitor/substrate-bound "closed" form of the M3 peptidases, generated from the free "open" substrate-accessible form by a hinge-bending mechanism. A similar mechanism has recently been demonstrated experimentally for ACE2.     

Amino-acids and peptides. Part 48. Synthesis of bradykinyl-chloromethane

An analogue of the local tissue hormone bradykinin, in which the terminal carboxy group is replaced by a chloromethyl ketone function, has been synthesised. A protected octapeptide, synthesised by the picolyl ester "handle" procedure, was coupled to N delta, N omega-dibenzyloxycarbonyl-L-arginyl-choromethane; the product was deprotected by hydrogen fluoride, giving bradykinyl-chloromethane. The preservation of the reactive chloromethyl ketone group and the entire structure of the product was confirmed by fast atom bombardment mass spectrometry. On the rat uterus and guinea-pig ileum bradykinyl-chloromethane was a weak agonist showing no antagonism of responses to bradykinin.     

Solid state structural analysis of the cyclooctapeptide cyclo- (Pro1-Pro-Phe-Phe-Ac6c-Ile-D-Ala-Val8)

A solid state analysis of the cyclic octapeptide c(-Pro(1)-Pro-Phe-Phe-Ac(6)c-Ile-D-Ala-Val(8)-) (C8-CLA), containing the Pro-Pro-Phe-Phe sequence, followed by the bulky helicogenic C(alpha,alpha)-dialkylated 1-aminocyclohexane-1-carboxylic acid (Ac(6)c) residue and a D-Ala residue in position 7, has been carried out by x-ray diffraction.The crystals, grown from a DMSO solution, are monoclinic, space group P2(1) with a = 13.458(3) A, b = 19. 404(5) A, c = 21.508(4) A, and beta = 90.83(6) degrees, with two independent cyclic molecules in the asymmetric unit, two DMSO molecules, and three water molecules. The structure has been solved using the half and bake procedure by Sheldrick, and refined to final R1 and wR2 indices of 0.0613 and 0.1534 for 9867 reflections with I > 2sigma(I).This cyclic peptide, a deletion analogue of the naturally occurring cyclic nonapeptide cyclolinopeptide A [c(Pro-Pro-Phe-Phe-Leu-Ile-Ile-Leu-Val), CLA] has been designed to study the influence of the ring size reduction on the conformational behavior of CLA and more in general to obtain structural information on asymmetric cyclic octapeptides.The compound exhibits, in the solid state, a "banana-twisted" conformation with a cis peptide bond located between the two proline residues. Five intramolecular H bonds stabilize the structure: one type VIa beta-turn, two consecutive type III/I beta-turns, one gamma-turn, and one C(16) bend.The structure has also been compared with either the solution structure previously reported by us and obtained by nmr and computational analysis, and with solid state structural data reported in the literature on cyclic octapeptides.     

Identification of the octapeptide [Met]enkephalin -Arg6-Gly7-Leu8 in extracts of bovine adrenal medulla

The primary structure of the 5300 dalton adrenal enkephalin-containing polypeptide was shown to contain at its carboxyl terminus the sequence -Lys-Arg-Tyr-Gly-Gly-Phe-Met-Arg-Gly-Leu-COOH (Jones $\text{et al}$., (1981) Proc. Natl. Acad. Sci. USA, in press). From knowledge of the type of processing that occurs at paired basic amino acid residues such as -Lys-Arg-, it was predicted that the octapeptide Tyr-Gly-Gly-Phe-Met-Arg-Gly-Leu should be produced and exist in free form in the adrenal gland. This octapeptide has now been purified from bovine adrenal chromaffin granules. Its structure was determined by amino acid analysis, carboxypeptidase Y time course hydrolysis and sequential digestion with trypsin and carboxypeptidase B. The octapeptide has 35% the opiate receptor binding activity of [Met]enkephalin.     

Region X, the cell-wall-attachment part of staphylococcal protein A

The sequence of region X of staphylococcal protein A has been determined. The hypothesis has been put forward that this region spans the Staphylococcus aureus cell wall and is responsible for the binding to the peptidoglycan. The primary amino acid sequence of region X was determined for two strains exhibiting cell-wall-bound protein A, Cowan I and 8325-4. The sequence determination of the Cowan I material is partial and was performed by Edman degradation, in contrast to the sequence of the 8325-4 material which was completely analyzed by nucleotide sequencing of the corresponding gene. The region consists of two structurally different domains, a highly repetitive region (Xr), with an octapeptide structure repeated approximately 12 times, and a C-terminal domain (Xc) with an unique sequence. A comparison between the two strains reveals a high mutual homology as well as a high internal homology between the octapeptide structures. Six out of eight amino acids are identical in the repetition of this structure throughout region Xr in both proteins and the other two are changed in a rather regular pattern.     

A strong homology exists between the active T-cell binding gp120 octapeptide of human immunodeficiency virus and the subtilisin cleavage peptide of bovine ribonuclease A

A homology has been found between an octapeptide involved in attachment of the human immunodeficiency virus to helper/inducer T cells and an octapeptide segment of bovine pancreatic ribonuclease A. This segment (residues 19-26) contains the sites for subtilisin cleavage of this enzyme into the S-peptide and S-protein. From the X-ray crystal structure of ribonuclease, this sequence is known to be exposed to solvent and interacts little with the rest of the protein. A structure for the human immunodeficiency virus attachment peptide can be deduced from this homology, as a well-defined structure has been determined for this sequence in ribonuclease. This can be readily accomplished using previously developed computer methods based upon conformational energy calculations. The calculated structure for human immunodeficiency virus peptide is identical to the ribonuclease segment (19-26) in backbone conformation. It is stabilized by internal interactions of nonpolar residues, and by exposure of polar hydroxyl groups. The results suggest that the T-cell human immunodeficiency virus receptor may be hydrophilic in nature and that conservation of the sequence in two presumably functionally unrelated proteins is related to the need for conservation of exposed structure.     

Identification of novel members of the serum amyloid A protein superfamily as constitutive apolipoproteins of high density lipoprotein.

A novel serum amyloid A protein (SAA) has been identified as a normal apolipoprotein component of non-acute phase high density lipoprotein. This novel SAA has been designated "constitutive" SAA (C-SAA) to distinguish it from "acute phase" SAA (A-SAA). C-SAA was partially sequenced, and immunochemical analyses indicated that it constitutes a distinct subclass of apolipoproteins within the SAA superfamily. A C-SAA cDNA clone was isolated from a human liver library and sequenced. The clone predicts a pre-C-SAA molecule of 130 residues from which an 18-residue leader peptide is cleaved. The 112-residue mature molecule is 8 residues longer than human A-SAA; the size difference is due to the presence of an octapeptide between positions 70 and 77 that is not found in the corresponding region of human A-SAA. Paradoxically, octapeptides of similar composition are found at similar positions in the A-SAAs of a number of other species. The C-SAA octapeptide specifies the first two residues of a NSS tripeptide, the only potential N-linked glycosylation site in the molecule. Studies indicate that approximately 50% of these sites are glycosylated, thereby giving rise to two size classes, 14 and 19 kDa, of C-SAA in vivo. Human acute phase liver contains little C-SAA mRNA relative to the levels of A-SAA mRNA, and the treatment of PLC/PRF/5 hepatoma cells with monocyte-conditioned medium does not induce C-SAA mRNA concentrations to detectable levels, in contrast to the massive induction of A-SAA mRNA observed. C-SAA is therefore not a major acute phase reactant.     

Molecular modeling and chemical modification for finding peptide inhibitor against severe acute respiratory syndrome coronavirus main proteinase

Severe acute respiratory syndrome (SARS) is a respiratory disease caused by a newly found virus, called SARS coronavirus. In this study, the cleavage mechanism of the SARS coronavirus main proteinase (Mpro or 3CLpro) on the octapeptide NH2-AVLQ downward arrowSGFR-COOH was investigated using molecular mechanics and quantum mechanics simulations based on the experimental structure of the proteinase. It has been observed that the catalytic dyad (His-41/Cys-145) site between domains I and II attracts the pi electron density from the peptide bond Gln-Ser, increasing the positive charge on C(CO) of Gln and the negative charge on N(NH) of Ser, so as to weaken the Gln-Ser peptide bond. The catalytic functional group is the imidazole group of His-41 and the S in Cys-145. Ndelta1 on the imidazole ring plays the acid-base catalytic role. Based on the "distorted key theory" [K.C. Chou, Anal. Biochem. 233 (1996) 1-14], the possibility to convert the octapeptide to a competent inhibitor has been studied. It has been found that the chemical bond between Gln and Ser will become much stronger and no longer cleavable by the SARS enzyme after either changing the carbonyl group CO of Gln to CH2 or CF2 or changing the NH of Ser to CH2 or CF2. The octapeptide thus modified might become an effective inhibitor or a potential drug candidate against SARS.     

A 9 A two-dimensional projected structure of cholera toxin B-subunit-GM1 complexes determined by electron crystallography.

Highly ordered two-dimensional crystals of cholera toxin B-subunit pentamers have been grown by specific interaction with planar lipid films containing monosialoganglioside GM1. Electron diffractograms of frozen-hydrated crystals show diffraction peaks extending to beyond 4 A, while electron images diffract to 8 A. A two-dimensional projected structure of cholera toxin B-subunit-GM1 complex has been calculated at 9 A resolution by combining electron diffraction and image data. Crystals present an approximate pgg projection symmetry, with unit cell dimensions a = 119(+/- 1) A, b = 123(+/- 1) A, gamma = 90 degrees. Each pentameric assembly presents two concentric rings of electron scattering density, separated by an area of lower density. The outer and inner rings are centered at 25 A and and 11 A from the pentamer centre, respectively. The apparent projected density of the outer ring is larger than that of the inner ring. We propose that the outer and inner density rings correspond respectively to the peripheral beta-sheet arrangement and the central alpha-helix barrel, recently identified in the crystal structure of the heat-labile enterotoxin from Escherichia coli.     

Folding interpenetration in a gliadin model: the role of the characteristic octapeptide motif

A model of a rheologically relevant protein, omega-gliadin, is proposed and studied in this work by means of molecular dynamics techniques. The model is based on an octapeptide repeat motif that is experimentally described as characteristic of that protein and as constituting it almost entirely. The initial molecular structure consisted of 20 such repeats. It was optimized and the dynamics developed along 980 ps, at dielectric constant epsilon = 80. Remarkable structural features were observed for the model built, such as an elongated twisted tubular overall structure with a peculiar interpenetrating folding pattern, of a very regular character, organized strand formation, topologically segregated sites on the outer surface with an alternate hydrophilic/hydrophobic character and a hydrophilic inner cavity. Dynamics produced significantly more relaxed structures, but was not able to change the main geometric features presented by the original structure. Preliminary attempts of correlating some structural/dynamic aspects observed for the model with features of gliadin rheological behavior are presented.     

Three-dimensional structure of rhesus rotavirus by cryoelectron microscopy and image reconstruction

The structure of rhesus rotavirus was examined by cryoelectron microscopy and image analysis. Three-dimensional reconstructions of infectious virions were computed at 26- and 37-A resolution from electron micrographs recorded at two different levels of defocus. The major features revealed by the reconstructions are (a) both outer and inner capsids are constructed with T = 13l icosahedral lattice symmetry; (b) 60 spikelike projections, attributed to VP4, extend at least 100 A from the outer capsid surface; (c) the outer capsid, attributed primarily to VP7, has a smoothly rippled surface at a mean radius of 377 A and is perforated by 132 aqueous holes ranging from 40-65 A in diameter; (d) the inner capsid has a "bristled" outer surface composed of 260 trimeric-shaped columns of density, attributed to VP6, which merge with a smooth, spherical shell of density at a lower, mean radius of 299 A, and which is perforated by holes in register with those in the outer capsid; (e) a "core" region contains a third, nonspherical shell of density at a mean radius of 225 A that encapsidates the double-stranded RNA genome; and (f) the space between the outer and inner capsids forms an open aqueous network that may provide pathways for the diffusion of ions and small regulatory molecules as well as the extrusion of RNA. The assignment of different viral structural proteins to specific features of the reconstruction has been tentatively made on the basis of excluded volume estimates and previous biochemical characterizations of rotavirus.     

Ring conformation of cyclic octapeptide cyclo (L-Pro-Sar)4 in the crystalline state

A single-crystal X-ray diffraction analysis has been made of the structure of the cyclic octapeptide cyclo(L-Pro-Sar)4. The material [C32H48O8N8 X (21/4) H2O X (1/2) CH3OH, Mr = 799.43] crystallizes in the monoclinic space group C2 with cell dimensions a = 14.544 (3), b = 11.902 (2), c = 14.064 (3), and beta = 122.26 (2) degrees (lambda = 1.54178 A, T = 293 K). The final R value for the 1980 observed reflections is 0.079. The ring conformation has the peptide bond sequences of cis-cis-trans-trans-cis-cis-trans-trans (Pro-Sar-Pro peptide bond linkages are cis-cis- or trans-trans). The pyrrolidine rings in the four proline residues take an envelope form in which the gamma-carbon atom deviates from the plane of the remaining four atoms in the ring.     

Life in Its Uniqueness Remains Difficult to Define in Scientific Terms

Abstract

The crystal structure of the dehydro octapeptide Boc-Val-ΔPhe-Phe-Ala-Leu-Ala-ΔPhe-Leu-OH has been determined to atomic resolution by X-ray crystallographic methods. The crystals grown by slow evaporation of peptide solution in methanol/water are orthorhombic, space group P2₁2₁2₁. The unit cell parameters are a= 8.404 (3), b= 25.598(2) and c = 27.946(3) Å, Z=4. The agreement factor is R= 7.58% for 3636 reflections having (IF₀I) ≥ 3σ (IF₀I). The peptide molecule is characterised by a 3₁₀-helix at the N-terminus and a π-turn at the C-terminus. This conformation is exactly similar to the helix termination features observed in proteins. The π-turn conformation observed in the octapeptide is in good agreement with the conformational features of π-turns seen in some proteins. The α_L-position in the π-turn of the octapeptide is occupied by ΔPhe⁷, which shows that even bulky residues can be accommodated in this position of the π-turns. In proteins, it is generally seen that aL- position is occupied by glycine residue. No intermolecular head-to-tail hydrogen bonds are observed in solid state structure of the octapeptide. A water molecule located in the unit cell of the peptide molecule is mainly used to hold the peptide molecule together in the crystal. The conformation observed for the octapeptide might be useful to understand the helix termination and chain reversal in proteins and to construct helix terminators for denovo protein design.     

Studies on phytohemagglutinins. XXVII. A study of the pea lectin binding site.

Under defined mild conditions the reaction of the pea lectin with 2-nitrophenylsulfenyl chloride results in sulfenylation of only 2 of the 10 tryptophan residues of the lectin molecule with simultaneous loss of biological activity. Both sulfenylated tryptophan residues belong to the two heavy subunits of the lectin. Enzymic hydrolysis and separation of the tryptic peptides yields only one homogeneous yellow peptide containing the modified tryptophan residue. The isolated peptide has the following sequence (NPS, nitrophenylsulfenyl): HAsp-Val-Val-Pro-Glu-(2-NPS-Trp)-Val-ArgOH. The octapeptide is either directly a part of the pea lectin binding site or it plays an important role in maintaining the tertiary structure of the binding site. According to the amino acid composition and amino acid sequence, the octapeptide isolated from the pea lectin is almost identical with that part of the peptide chain of concanavalin A near to which the location of the sugar binding site is supposed to be.     

Dipeptide backbone conformation and antibody recognition of a viral octapeptide epitope.

The peptide YKGTMDSG (Tyr-Lys-Gly-Thr-Met-Asp-Ser-Gly) represents an important antigenic determinant from the glycoprotein G2 of the pathogenic Rift Valley fever virus. By preparing a series of single-residue substitution peptides, the importance to antigenicity of individual residues within this octapeptide has been determined. Here, we investigated a simple and rapid computational analysis to test for correlations between the observed antigenicity of the substitution analogue peptides and the calculated conformational preferences in local regions of the peptides. Conformational energy analyses were carried out on all dipeptide combinations represented in the wild-type octapeptide and in the single-residue substitution analogue peptides. Conformational similarities and differences between wild-type and substitution dipeptide pairs were determined. The results of these computational analyses were then compared with the data on the relative antigenicity of the wild-type octapeptide and the substitution analogues. This comparison revealed a positive correlation. Substitution peptides showing changes in antigenicity possessed significant changes in the calculated backbone conformation relative to wild type in the dipeptides encompassing the residue substitution. Substitution peptides showing no change in antigenicity similarly showed no significant changes in dipeptide conformation. The potential utility of dipeptide conformational energy analyses and this preliminary structure-activity correlation are discussed.     

Fine Structure of the Endogenous Stages of Eimeria labbeana. I. The First Generation Merozoites

SYNOPSIS. The fine structure of the 1st generation merozoites of Eimeria labbeana from the ileal mucosa of artificially infected pigeons ( Columba livia ) was investigated and described. The 1st generation merozoites which appeared between 36-48 hr after infection averaged 4.4 × 2.1 μm in size. The 3-membraned pellicle was irregular in texture and harbored a single micropore, and many micropore-like invaginations. Closely apposed to the inner pellicular membrane were seen 22 microtubules, each 22–25 nm in diameter. An apical vesicle, 50 nm in diameter, seen at the anterior extremity, was connected with the common duct of the micronemes. The conoid consisted of 9 spiral elements, each 30 × 25 nm. The paired organelle (rhoptries) varied in length (1.4–2.2 μm), and the ductules (23 nm diameter) were composed of 2 inner tubules, each 6 nm in diameter. A unit membrane enveloped the partially alveolar and differentially osmiophilic interior of the bulbous regions of the rhoptries. The "rod-like structure"was found to be tubular and represented the common duct of the micronemes.     

Structure and conformation of linear peptides. VIII. Structure of t-Boc-glycyl-L-phenylalanine

The crystal structure of t-Boc-glycyl-L-phenylalanine (C14H22N2O5, molecular weight = 298) has been determined. Crystals are monoclinic, space group P2(1), with a = 7.599(1) A, b = 9.576(2), c = 12.841(2), beta = 97.21(1) degrees, Z = 2, Dm = 1.149, Dc = 1.168 g X cm-3. Trial structure was obtained by direct methods and refined to a final R-index of 0.064 for 1465 reflections with I greater than 1 sigma. The peptide unit is trans planar and is nearly perpendicular to the plane containing the urethane moiety. The plane of the carboxyl group makes a dihedral angle of 16.0 degrees with the peptide unit. The backbone torsion angles are omega 0 = -176.9 degrees, phi 1 = -88.0 degrees, psi 1 = -14.5 degrees, omega 1 = 176.4 degrees, phi 2 = -164.7 degrees and psi 2 = 170.3 degrees. The phenylalanine side chain conformation is represented by the torsion angles chi 1 = 52.0 degrees, chi 2 = 85.8 degrees.