<Emphasis Type="Italic">CAR1</Emphasis> deletion by CRISPR/Cas9 reduces formation of ethyl carbamate from ethanol fermentation by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Enormous advances in genome editing technology have been achieved in recent decades. Among newly born genome editing technologies, CRISPR/Cas9 is considered revolutionary because it is easy to use and highly precise for editing genes in target organisms. CRISPR/Cas9 technology has also been applied for removing unfavorable target genes. In this study, we used CRISPR/Cas9 technology to reduce ethyl carbamate (EC), a potential carcinogen, which was formed during the ethanol fermentation process by yeast. Because the yeast CAR1 gene encoding arginase is the key gene to form ethyl carbamate, we inactivated the yeast CAR1 gene by the complete deletion of the gene or the introduction of a nonsense mutation in the CAR1 locus using CRISPR/Cas9 technology. The engineered yeast strain showed a 98 % decrease in specific activity of arginase while displaying a comparable ethanol fermentation performance. In addition, the CAR1-inactivated mutants showed reduced formation of EC and urea, as compared to the parental yeast strain. Importantly, CRISPR/Cas9 technology enabled generation of a CAR1-inactivated yeast strains without leaving remnants of heterologous genes from a vector, suggesting that the engineered yeast by CRISPR/Cas9 technology might sidestep GMO regulation.     

Development of a genome editing technique using the CRISPR/Cas9 system in the industrial filamentous fungus <Emphasis Type="Italic">Aspergillus oryzae</Emphasis>

Objectives

To develop a genome editing method using the CRISPR/Cas9 system in Aspergillus oryzae, the industrial filamentous fungus used in Japanese traditional fermentation and for the production of enzymes and heterologous proteins.

Results

To develop the CRISPR/Cas9 system as a genome editing technique for A. oryzae, we constructed plasmids expressing the gene encoding Cas9 nuclease and single guide RNAs for the mutagenesis of target genes. We introduced these into an A. oryzae strain and obtained transformants containing mutations within each target gene that exhibited expected phenotypes. The mutational rates ranged from 10 to 20 %, and 1 bp deletions or insertions were the most commonly induced mutations.

Conclusions

We developed a functional and versatile genome editing method using the CRISPR/Cas9 system in A. oryzae. This technique will contribute to the use of efficient targeted mutagenesis in many A. oryzae industrial strains.

     

Seamless site-directed mutagenesis of the <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> genome using CRISPR-Cas9

CRISPR assisted homology directed repair enables the introduction of virtually any modification to the Saccharomyces cerevisiae genome. Of obvious interest is the marker-free and seamless introduction of point mutations. To fulfill this promise, a strategy that effects single nucleotide changes while preventing repeated recognition and cutting by the gRNA/Cas9 complex is needed. We demonstrate a two-step method to introduce point mutations at 17 positions in the S. cerevisiae genome. We show the general applicability of the method, enabling the seamless introduction of single nucleotide changes at any location, including essential genes and non-coding regions. We also show a quantifiable phenotype for a point mutation introduced in gene GSH1. The ease and wide applicability of this general method, combined with the demonstration of its feasibility will enable genome editing at an unprecedented level of detail in yeast and other organisms.     

Recent advances in CRISPR/Cas9 mediated genome editing in <Emphasis Type="Italic">Bacillus subtilis</Emphasis>

Genome editing using engineered nucleases has rapidly transformed from a niche technology to a mainstream method used in various host cells. Its widespread adoption has been largely developed by the emergence of the clustered regularly interspaced short palindromic repeats (CRISPR) system, which uses an easily customizable specificity RNA-guided DNA endonuclease, such as Cas9. Recently, CRISPR/Cas9 mediated genome engineering has been widely applied to model organisms, including Bacillus subtilis, enabling facile, rapid high-fidelity modification of endogenous native genes. Here, we reviewed the recent progress in B. subtilis gene editing using CRISPR/Cas9 based tools, and highlighted state-of-the-art strategies for design of CRISPR/Cas9 system. Finally, future perspectives on the use of CRISPR/Cas9 genome engineering for sequence-specific genome editing in B. subtilis are provided.     

CRISPR/Cas9-mediated efficient editing in <Emphasis Type="Italic">phytoene desaturase</Emphasis> (<Emphasis Type="Italic">PDS</Emphasis>) demonstrates precise manipulation in banana cv. Rasthali genome

The clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) has been reported for precise genome modification in many plants. In the current study, we demonstrate a successful mutation in phytoene desaturase (RAS-PDS) of banana cv. Rasthali using the CRISPR/Cas9 system. Two PDS genes were isolated from Rasthali (RAS-PDS1 and RAS-PDS2), and their protein sequence analysis confirmed that both PDS comprises conserved motifs for enzyme activity. Phylogenetic analysis of RAS-PDS1 and RAS-PDS2 revealed a close evolutionary relationship with other monocot species. The tissue-specific expression profile of RAS-PDS1 and RAS-PDS2 in Rasthali suggested differential regulation of the genes. A single 19-bp guide RNA (gRNA) was designed to target the conserved region of these two RAS-PDS and transformed with Cas9 in embryogenic cell suspension (ECS) cultures of cv. Rasthali. Complete albino and variegated phenotype were observed among regenerated plantlets. DNA sequencing of 13 plants confirmed the indels with 59% mutation frequency in RAS-PDS, suggesting activation of the non-homologous end-joining (NHEJ) pathway. The majority of mutations were either insertion (1–5) or deletion (1–4) of nucleotides near to protospacer adjacent motif (PAM). These mutations have created stop codons in RAS-PDS sequences which suggest premature termination of RAS-PDS protein synthesis. The decreased chlorophyll and total carotenoid contents were detected in mutant lines that revealed the functional disruption of both RAS-PDS genes. Our results demonstrate that genome editing through CRISPR/Cas9 can be applied as an efficient tool for banana genome modification.     

Efficient genome editing in cultured cells and embryos of Debao pig and swamp buffalo using the CRISPR/Cas9 system

Myostatin (MSTN), a protein encoded by growth differentiation factor 8 (GDF8), is primarily expressed in skeletal muscle and negatively regulates the development and regeneration of muscle. Accordingly, myostatin-deficient animals exhibit a double-muscling phenotype. The CRISPR/Cas9 system has proven to be an efficient genome-editing tool and has been applied to gene modification in cells from many model organisms such as Drosophila melanogaster, zebrafish, mouse, rat, sheep, and human. Here, we edited the GDF8 gene in fibroblasts and embryos of Debao pig and swamp buffalo using the CRISPR/Cas9 system. The CRISPR/Cas9-mediated mutation efficiency in fibroblasts was as high as 87.5% in pig and 78.9% in buffalo. We then obtained single-cell clones with mutations at the specific sites of the GDF8 gene by screening with G418 in fibroblasts of pig and buffalo. In addition, the frequencies of Cas9/gRNA-mediated mutations were at 36 and 25% in the intracytoplasmic sperm injection embryos of pig and in vitro fertilization embryos of buffalo, respectively. Our work demonstrates that the Cas9/gRNA system is a highly efficient and fast tool for genome editing in cultured cells and embryos of Debao pig and swamp buffalo. These results can be helpful for the establishment of a new animal strain that can generate more meat.     

Gene expression profiles of the thermotolerant yeast <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> strain KKU-VN8 during high-temperature ethanol fermentation using sweet sorghum juice

Objectives

To investigate gene expression profiles of the thermotolerant yeast Saccharomyces cerevisiae strain KKU-VN8, a potential high-ethanol producer, in response to various stresses during high-temperature ethanol fermentation using sweet sorghum juice (SSJ) under optimal conditions.

Results

The maximal ethanol concentration obtained by S. cerevisiae KKU-VN8 using SSJ at 40 °C was 66.6 g/l, with a productivity of 1.39 g/l/h and a theoretical ethanol yield of 81%. Quantitative RT-PCR assays were performed to investigate the gene expression profiles of S. cerevisiae KKU-VN8. Differential expression of genes encoding heat-shock proteins (HSP82, HSP104, SSA4), genes involved in trehalose metabolism (TPS1, TPS2, NTH1) and genes involved the glycolytic pathway (ADH1, ADH2, CDC19) at various time points during fermentation was observed. The expression levels of HSP82, HSP104, SSA4, ADH1 and CDC19 were significantly higher than those of the controls (10.2-, 4-, 8-, 8.9- and 5.9-fold higher, respectively). In contrast, the expression levels of TPS1, TPS2, NTH1 and ADH2 were approx. 2-fold less than those of the controls.

Conclusions

The highly expressed genes encoding heat-shock proteins, HSP82 and SSA4, potentially play an important role in helping S. cerevisiae KKU-VN8 cope with various stresses that occur during high-temperature fermentation, leading to higher ethanol production efficiency.

     

<Emphasis Type="Italic">Arabidopsis glutamate:glyoxylate aminotransferase 1</Emphasis> (Ler) mutants generated by CRISPR/Cas9 and their characteristics

Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated 9 (CRISPR/Cas9) technology provides an efficient tool for editing the genomes of plants, animals and microorganisms. Glutamate:glyoxylate aminotransferase 1 (GGAT1) is a key enzyme in the photorespiration pathway; however, its regulation mechanism is largely unknown. Given that EMS-mutagenized ggat1 (Col-0 background) M2 pools have been generated, ggat1 (Ler background) should be very useful in the positional cloning of suppressor and/or enhancer genes of GGAT1. Unfortunately, such ggat1 (Ler) mutants are not currently available. In this study, CRISPR/Cas9 was used to generate ggat1 (Ler) mutants. Two GGAT1 target single-guide RNAs (sgRNAs) were constructed into pYLCRISPR/Cas9P_35S-N, and flowering Arabidopsis (Ler) plants were transformed using an Agrobacterium tumefaciens-mediated floral dip protocol. Eleven chimeric and two heterozygous GGAT1-edited T1 lines of target 1 were separately screened from positive transgenic lines. Two ggat1 homozygous mutants, CTC-deletion and T-deletion at target 1, were generated from T2 generations of the 13 T1 lines. The edited mutation sites were found to be stable through generations regardless of whether the T-DNA was present. In addition, the genetic segregation of the mutation sites obeyed the Mendelian single gene segregation rule, and no mutations were detected at the possible off-target site. Also, the two independent ggat1 mutants had similar photorespiration phenotypes and down-regulated GGAT enzyme activity. Together, these results indicate that genetically stable ggat1 (Ler) mutants were generated by CRISPR/Cas9 genome editing, and these mutants will be used to promote the positional cloning of suppressor and/or enhancer genes of GGAT1 in our subsequent study.     

CRISPR/Cas9 in rice can induce new mutations in later generations,leading to chimerism and unpredicted segregation of the targeted mutation

CRISPR/Cas9 is a novel tool for targeted mutagenesis and is applicable to plants, including rice. Previous reports on CRISPR/Cas9 in rice have demonstrated that target mutations are transmitted to the next generation in accordance with Mendelian law, but heritability of the target mutation and the role of inherited Cas9 gene have not been fully elucidated. Here, we targeted the rice phytoene desaturase gene, mutants of which exhibit an albino phenotype, by using CRISPR/Cas9 and analyzed segregation of target mutations. Agrobacterium-mediated methods using immature embryos successfully transformed a CRISPR/Cas9 system into five rice cultivars and subsequently induced mutation. Unpredicted segregations, with more mutants than theoretically predicted, were frequently found in T₁ plants from monoallelic T₀ mutants. Chimeric plants with both biallelic and monoallelic mutated cells were also observed in the T₁. Next, we followed segregation of a target mutation in the T₂ from monoallelic T₁ mutants. When T₁ mutants possessed Cas9, unpredicted segregations of the target mutation and chimeric plants were observed again in the T₂. When T₁ mutants did not possess Cas9, segregation of the target mutations followed Mendelian law and no chimeric plants appeared in the T₂. T₂ mutants with Cas9 had mutations different from the original ones found in T₀. Our results indicated that inherited Cas9 was still active in later generations and could induce new mutations in the progeny, leading to chimerism and unpredicted segregation. We conclude that Cas9 has to be eliminated by segregation in T₁ to generate homozygous mutants without chimerism or unpredicted segregation.     

Gene inactivation using the CRISPR/Cas9 system in the nematode <Emphasis Type="Italic">Pristionchus pacificus</Emphasis>

The diplogastrid nematode Pristionchus pacificus is a nematode model system for comparative studies to Caenorhabditis elegans and integrative evolutionary biology aiming for interdisciplinary approaches of evo-devo, population genetics, and ecology. For this, fieldwork can be combined with laboratory studies, and P. pacificus has a well-developed methodological toolkit of forward genetics, whole genome sequencing, DNA-mediated transformation, and various –omics platforms. Here, we establish CRISPR/Cas9-based gene inactivation and describe various boundary conditions of this methodology for P. pacificus. Specifically, we demonstrate that most mutations arise within the first 9 hours after injections. We systematically tested the efficiency of sgRNAs targeting different exons in Ppa-dpy-1 and characterized the molecular nature of the induced mutations. Finally, we provide a protocol that might also be useful for researchers working with other non-Caenorhabditis nematodes.     

CRISPR/Cas9 editing of carotenoid genes in tomato

CRISPR/Cas9 technology is rapidly spreading as genome editing system in crop breeding. The efficacy of CRISPR/Cas9 in tomato was tested on Psy1 and CrtR-b2, two key genes of carotenoid biosynthesis. Carotenoids are plant secondary metabolites that must be present in the diet of higher animals because they exert irreplaceable functions in important physiological processes. Psy1 and CrtR-b2 were chosen because their impairment is easily detectable as a change of fruit or flower color. Two CRISPR/Cas9 constructs were designed to target neighboring sequences on the first exon of each gene. Thirty-four out of forty-nine (69%) transformed plants showed the expected loss-of-function phenotypes due to the editing of both alleles of a locus. However, by including the seven plants edited only at one of the two homologs and showing a normal phenotype, the editing rate reaches the 84%. Although none chimeric phenotype was observed, the cloning of target region amplified fragments revealed that in the 40% of analyzed DNA samples were present more than two alleles. As concerning the type of mutation, it was possible to identify 34 new different alleles across the four transformation experiments. The sequence characterization of the CRISPR/Cas9-induced mutations showed that the most frequent repair errors were the insertion and the deletion of one base. The results of this study prove that the CRISPRCas9 system can be an efficient and quick method for the generation of useful mutations in tomato to be implemented in breeding programs.     

Combinatorial metabolic pathway assembly in the yeast genome with RNA-guided Cas9

The yeast Saccharomyces cerevisiae is an important industrial platform for the production of grain and cellulosic ethanol, isobutanol, butanediol, isoprenoids, and other chemicals. The construction of a successful production strain usually involves multiple gene knockouts and chromosomal integration of expression cassettes to redirect the metabolic fluxes for the conversion of sugars and other feed stocks into the desired product. RNA-guided Cas9 based genome editing has been demonstrated in many prokaryotic and eukaryotic hosts including S. cerevisiae, in which it has been additionally exploited as a tool for metabolic engineering. To extend the utilization of RNA-guided Cas9 as a metabolic pathway building tool, we demonstrated the direct assembly and chromosomal integration of up to 17 overlapping DNA fragments encoding the beta-carotene biosynthetic pathway. Furthermore, we generated a combinatorial strain library for the beta-carotene biosynthetic pathway, directly integrated into the yeast genome to create a diverse library of strains. This enabled the screening of combinatorial libraries in stable chromosomally integrated strains for rapid improvements of product titers. This combinatorial approach for pathway assembly will significantly accelerate the current speed of metabolic engineering for S. cerevisiae as an industrial platform, and increase the number of strains that can be simultaneously evaluated for enzyme screening, expression optimization and protein engineering to achieve the titer, rate and yield necessary for the commercialization of new industrial fermentation products.     

Changes in intracellular metabolism underlying the adaptation of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> strains to ethanol stress

Saccharomyces cerevisiae is often stressed by the ethanol which accumulates during the production of bioethanol by the fermentation process. The study of ethanol-adapted S. cerevisiae strains provide an opportunity to clarify the molecular mechanism underlying the adaptation or tolerance of S. cerevisiae to ethanol stress. The aim of this study was to clarify this molecular mechanism by investigating the ethanol adaptation-associated intracellular metabolic changes in S. cerevisiae using a gas chromatography–mass spectrometry-based metabolomics strategy. A partial least-squares-discriminant analysis between the parental strain and ethanol-adapted strains identified 12 differential metabolites of variable importance with a projection value of >1. The ethanol-adapted strains had a more activated glycolysis pathway and higher energy production than the parental strain, suggesting the possibility that an increased energy production and energy requirement might be partly responsible for an increased ethanol tolerance. An increased glycine content also partly contributed to the higher ethanol tolerance of the ethanol-adapted strains. The decreased oleic acid content may be a self-protection mechanism of ethanol-adapted strains to maintain membrane integrity through decreasing membrane fluidity. We suggest that while being exposed to ethanol stress, ethanol-adapted S. cerevisiae cells may remodel their metabolic phenotype and the composition of their cell membrane to adapt to ethanol stress and acquire higher ethanol tolerance.     

Hypomorphic phenotype of <Emphasis Type="Italic">Foxn1</Emphasis> gene-modified rats by CRISPR/Cas9 system

The Foxn1 gene is known as a critical factor for the differentiation of thymic and skin epithelial cells. This study was designed to examine the phenotype of Foxn1-modified rats generated by the CRISPR/Cas9 system. Guide-RNA designed for first exon of the Foxn1 and mRNA of Cas9 were co-injected into the pronucleus of Crlj:WI zygotes. Transfer of 158 injected zygotes resulted in the birth of 50 offspring (32 %), and PCR identified five (10 %) as Foxn1-edited. Genomic sequencing revealed the deletion of 44 or 60 bp from and/or insertion of 4 bp into the Foxn1 gene in a single allele. The number of T-cells in the peripheral blood lymphocytes of mutant rats decreased markedly. While homozygous deleted mutant rats had no thymus, the mutant rats were not completely hairless and showed normal performance in delivery and nursing. Splicing variants of the indel-mutation in the Foxn1 gene may cause hypomorphic allele, resulting in the phenotype of thymus deficiency and incomplete hairless. In conclusion, the mutant rats in Foxn1 gene edited by the CRISPR/Cas9 system showed the phenotype of thymus deficiency and incomplete hairless which was characterized by splicing variants.     

Effective screen of CRISPR/Cas9-induced mutants in rice by single-strand conformation polymorphism

Key message

A method based on DNA single-strand conformation polymorphism is demonstrated for effective genotyping of CRISPR/Cas9-induced mutants in rice.

Abstract

Clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated 9 (Cas9) has been widely adopted for genome editing in many organisms. A large proportion of mutations generated by CRISPR/Cas9 are very small insertions and deletions (indels), presumably because Cas9 generates blunt-ended double-strand breaks which are subsequently repaired without extensive end-processing. CRISPR/Cas9 is highly effective for targeted mutagenesis in the important crop, rice. For example, homozygous mutant seedlings are commonly recovered from CRISPR/Cas9-treated calli. However, many current mutation detection methods are not very suitable for screening homozygous mutants that typically carry small indels. In this study, we tested a mutation detection method based on single-strand conformational polymorphism (SSCP). We found it can effectively detect small indels in pilot experiments. By applying the SSCP method for CRISRP-Cas9-mediated targeted mutagenesis in rice, we successfully identified multiple mutants of OsROC5 and OsDEP1. In conclusion, the SSCP analysis will be a useful genotyping method for rapid identification of CRISPR/Cas9-induced mutants, including the most desirable homozygous mutants. The method also has high potential for similar applications in other plant species.

     

A protocol for custom CRISPR Cas9 donor vector construction to truncate genes in mammalian cells using pcDNA3 backbone

Background

Clustered regularly interspaced short palindromic repeat (CRISPR) RNA-guided adaptive immune systems are found in prokaryotes to defend cells from foreign DNA. CRISPR Cas9 systems have been modified and employed as genome editing tools in wide ranging organisms. Here, we provide a detailed protocol to truncate genes in mammalian cells using CRISPR Cas9 editing. We describe custom donor vector construction using Gibson assembly with the commonly utilized pcDNA3 vector as the backbone.

Results

We describe a step-by-step method to truncate genes of interest in mammalian cell lines using custom-made donor vectors. Our method employs 2 guide RNAs, mutant Cas9D10A nickase (Cas9?=?CRISPR associated sequence 9), and a custom-made donor vector for homologous recombination to precisely truncate a gene of interest with a selectable neomycin resistance cassette (NPTII: Neomycin Phosphotransferase II). We provide a detailed protocol on how to design and construct a custom donor vector using Gibson assembly (and the commonly utilized pcDNA3 vector as the backbone) allowing researchers to obtain specific gene modifications of interest (gene truncation, gene deletion, epitope tagging or knock-in mutation). Selection of mutants in mammalian cell lines with G418 (Geneticin) combined with several screening methods: western blot analysis, polymerase chain reaction, and Sanger sequencing resulted in streamlined mutant isolation. Proof of principle experiments were done in several mammalian cell lines.

Conclusions

Here we describe a detailed protocol to employ CRISPR Cas9 genome editing to truncate genes of interest using the commonly employed expression vector pcDNA3 as the backbone for the donor vector. Providing a detailed protocol for custom donor vector design and construction will enable researchers to develop unique genome editing tools. To date, detailed protocols for CRISPR Cas9 custom donor vector construction are limited (Lee et al. in Sci Rep 5:8572, 2015; Ma et al. in Sci Rep 4:4489, 2014). Custom donor vectors are commercially available, but can be expensive. Our goal is to share this protocol to aid researchers in performing genetic investigations that require custom donor vectors for specialized applications (specific gene truncations, knock-in mutations, and epitope tagging applications).