Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

On the reduction behaviour of 2-methoxyethyl and 2-methylthioethyl substituted zirconocene dichlorides: crystal structure of (η,σ-C5Me4CH2CH2S)2Zr

A reduction of previously reported 2-methoxyethyl and 2-methylthioethyl functionalized zirconocenedichlorides (η⁵-C₅Me₄CH₂CH₂EMe)(η⁵-C₅Me₅)(ZrCl₂ (E = O, S) and (η⁵-C₅Me₄CH₂CH₂EMe)(η⁵-C₅Me₄CH₂CH₂E′Me)ZrCl₂ (E = O, S; E′ = O, S) with Mg/Hg in THF leads unexpectedly to the products of O---Me and S---Me bond cleavage (η⁵,σ-C₅Me₄CH₂CH₂E)(η⁵-C₅Me₅)ZrMe (E = O, S), (η⁵,σ-C₅Me₄CH₂CH₂E)(η⁵-C₅Me₄CH₂CH₂E′Me)ZrMe (E = O, S; E′ = O), and (η⁵,σ-C₅Me₄CH₂CH₂S)₂Zr respectively. The crystal structure of (η⁵,σ-C₅Me₄CH₂CH₂S)₂Zr was established by X-ray analysis. At that same time the reduction of (ηsu5-C_{5Me4CH2CH2EMe)(η⁵-C5Me5)ZrCl2 (E> = O, S)} under 1 atm of CO gives either only the dicarbonyl derivative (η⁵-C₅Me₄CH₂CH₂EMe) (η⁵-C₆Me₅)Zr(CO)₂ (E = O) or a complex mixture of products (E = S).     

C60-fullerenides of ytterbium and lutetium

Cp^#₂Yb (Cp^#=C₅H₄(CH₂)₂NMe₂) has been obtained by reaction of YbI₂(THF)₂ with 2 equiv. of C₅H₄(CH₂CH₂NMe₂)K in THF. The X-ray structure analysis shows a bent structure with intramolecular coordination of both nitrogen atoms to ytterbium. The reaction of C₆₀-fullerene with Cp^#₂Yb leads to the formation of the fullerenide derivative [Cp^#₂Yb]₂C₆₀, which shows an ESR signal in the solid state and in THF solution at room temperature (solid: ΔH = 50 G, G = 1.9992; solution: ΔH = 10 G, G = 2.0001) and a magnetic moment of 3.6 BM. The lutetium fullerenides CpLu(C₆₀)(DME) (3) and Cp^*Lu(C₆₀)(DME)(C₆H₅CH₃) (4), (Cp = η⁵−C₅H₅, Cp^* = η⁵−C₅Me₅), were obtained by reaction of C₆₀ with CpLu(C₁₀H₈) (DME) and Cp^*Lu(C₁₀H₈) (DME) in toluene. Both complexes are paramagnetic (μ_eff = 1.4 and 0.9 BM) and exhibit temperature-dependent ESR signals (293 K: g = 1.992 and 2.0002 respectively).     

Reactions of the haloalcohols HO(CH2)nCl (n = 2, 3) with platinum(II) - alkynyl and -alkyne complexes. X-ray crystal structure of trans-[Pt(Me) {C(OCH2CH2Cl) (CH2Ph)} (PPh3)2] [BF4]

The chloro complexes trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄, react with 1-alkynes HC---C---R in the presence of NEt₃ to afford the corresponding acetylide derivatives trans-[Pt(Me) (C---C---R) (PPh₃)₂] (R = p-tolyl (1), Ph (2), C(CH₃)₃ (3)). These complexes, with the exception of the t-butylacetylide complex, react with the chloroalcohols HO(CH₂)_nCl (n = 2, 3) in the presence of 1 equiv. of HBF₄ to afford the alkyl(chloroalkoxy)carbene complexes trans-[Pt(Me) {C[O(CH₂)_nCl](CH₂R) } (PPh₃)₂][BF₄] (R = p-tolyl, N = 2 (4), N = 3 (5); R=Ph, N = 2 (6)). A similar reaction of the bis(acetylide) complex trans-[Pt(C---C---Ph)₂(PMe₂Ph)₂] with 2 equiv. HBF₄ and 3-chloro-1-propanol affords trans-[Pt(C---CPh) {C(OCH₂CH₂CH₂Cl)(CH₂Ph) } (PMe₂Ph)₂][BF₄] (7). T alkyl(chloroalkoxy)-carbene complex trans-[Pt(Me) {C(OCH₂CH₂Cl)(CH₂Ph) } (PPh₃)₂][BF₄] (8) is formed by reaction of trans-[Pt(Me)(Cl)(PPh₃)₂], after treatment with AgBF₄ in HOCH₂CH₂Cl, with phenylacetylene in the presence of 1 equiv. of n-BuLi. The reaction of the dimer [Pt(Cl)(μ-Cl)(PMe₂Ph)]₂ with p-tolylacetylene and 3-chloro-1-propanol yields cis-[PtCl₂{C(OCH₂CH₂CH₂Cl)(CH₂C₆H₄-p-Me}(PMe₂Ph)] (9). The X-ray molecular structure of (8) has been determined. It crystallizes in the orthorhombic system, space group Pna2₁, with a = 11.785(2), B = 29.418(4), C = 15.409(3) Å, V = 4889(1) ų and Z = 4. The carbene ligand is perpendicular to the Pt(II) coordination plane; the PtC(carbene) bond distance is 2.01(1) Å and the short C(carbene)-O bond distance of 1.30(1) Å suggests extensive electronic delocalization within the Pt---C(carbene)---O moietry.     

Reaction of [Pt{Fe(CO)3(NO)}2(PhCN)2] with diphenyl(2-pyridyl)phosphine selenide. Crystal structure of [(CO)3Fe(μ3-Se){Pt(CO)P(2-C5H4N)Ph2}2] and its theoretical study

The reaction between the linear trinuclear complex [Pt{Fe(CO)₃(NO)}₂(PhCN)₂] and Ph₂(2-C₅H₄N)PSe led to the isolation and characterization of the 46-electron cluster [(CO)₃Fe(μ₃-Se){Pt(CO)P(2-C₅H₄N)Ph₂}₂] (1), whose structure has been determined by X-ray diffraction methods. The cluster typology, which consists of an open triangle Pt---Fe---Pt capped by a μ₃-Se atom, is rather rare. The chemical bonding in 1 and in similar systems has been analyzed through density functional theory (DFT) and qualitative MO approaches. A strict analogy with the well understood L₂M(μ-acetylene)ML₂ systems is invoked by considering 1 as formed by the (CO)₃FeSe tetrahedral unit stabilized by sidewise interactions of the triple bond with two d¹⁰-L₂M fragments. Otherwise, the 18-electron (CO)₃FeSe monomer is unstable as an isolate molecule. This is confirmed by our DFT calculations that indicate how the well characterized dimer (CO)₃Fe(μ-Se₂)Fe(CO)₃ lies as much as, approximately, 58 kcal mol⁻¹ deeper in energy. Finally, by considering an analogy with [L₂M(μ-dichalcogen)ML₂]^{0, +2} redox systems (M=Pd, Pt), reduction of 1 to a dianion has been hypothesized and the structure of the latter has been tentatively explored by DFT calculations.     

Control of the migratory aptitudes of vinyl and aryl ligands in ruthenium(II) complexes

Complexes Ru(CO)₂ (CH=CHR) (C₆H₄X-4)L₂ (R=^tBu, Ph, OEt; X=H, Cl, OMe; L=PMe₃, PMe₂Ph, P(OMe)₂Ph) in which the two phosphorus ligands are mutually cis (isomer 1) react readily with ligands ^tBuNC, CO and P(OMe)₃ to give complexes in which one of the organic ligands has migrated onto a carbonyl ligand. Vinyl migration products (5) retain the mutually cis geometry of the phosphorus ligands, and are unstable: one of the decomposition products is the ketone RCH=CHC(O)C₆H₄X-4. Phenyl migration products (4) are stable and have the phosphorus ligands in mutually trans positions; an X-ray crystal structure of Ru(CO) (CN^tBu) {C(O)Ph} (CH=CHPh) (PMe₂Ph)₂ was obtained. In both cases, the incoming ligand enters trans to the newly formed acyl ligand. Vinyl migration is favoured over aryl migration by electron-donating substituents on the vinyl ligand, electron-withdrawing substituents on the aryl ligand, good σ-donor phosphorus ligands and use of ^tBuNC as the incoming ligand. The rate of phenyl migration in Ru(CO)₂(CH=CHPh)Ph(PMe₂Ph)₂ is independent of ^tBuNC concentration: k=1.5 × 10⁻³ s⁻¹ at 20°C. Isomer 3 of complexes Ru(CO)₂(CH=CHR) (C₆H₄X-4)L₂ in which the phosphorus ligands are mutually trans is much less reactive towards migration reactions. The reactivity of isomer 1 is attributed to the steric strain of two mutually cis phosphorus ligands.     

Photocatalyzed isomerization of 1-pentene by Ru3(CO)12 adsorbed onto porous Vycor glass

UV photolysis of Ru₃(CO)₁₂ physisorbed onto porous Vycor glass leads to the oxidative addition product (μ-H)Ru₃(CO)₁₀(μ-OSi). The latter reacts thermally with 1-pentene to form a stable adduct, HRu₃(CO)₁₀(OSi)(1-C₅H₁₀), and photolysis of the adduct results in isomerization of the alkene. HRu₃(CO)₁₀(OSi)(1-C₅H₁₀) + hv → (μ-H)Ru₃(CO)₁₀(μ-OSi) + 2-pentene As with other photoactivated hybrid systems, the cis-/trans-2-pentene product ratio changes during photolysis. Unlike the other systems, where light generates a thermal catalyst, the data gathered here indicate a photoassisted catalytic process in which photoactivation of HRu₃(CO)₁₀(OSi)(1-C₅H₁₀) leads to an excited state similar to a π-allyl complex.     

Dinuclear sulfide–thiolate complexes [Pt2(μ-S)(μ-SR)(PPh3)4] as cationic metalloligands

The cationic monoalkylated derivatives of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄], viz. [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = n-Bu, CH₂Ph) are themselves able to act as metalloligands towards the Ph₃PAu⁺ and R′Hg⁺ (R′ = Ph or ferrocenyl) fragments, by reaction with Ph₃PAuCl or R′HgCl, respectively. The resulting dicationic products [Pt₂(μ-SR)(μ-SAuPPh₃)(PPh₃)₄]²⁺ and [Pt₂(μ-SR)(μ-SHgR′)(PPh₃)₄]²⁺ are readily isolated as their hexafluorophosphate salts, and have been fully characterised by spectroscopic techniques and an X-ray structure determination on [Pt₂(μ-SR)(μ-SHgFc)(PPh₃)₄](PF₆)₂.     

Chiroptical properties of heterotrimetallic ‘wing-tip’ butterflies; synthesis and crystal structure of (μ-H)Ru2Fe2PdC(CO)12 (η-ß-C10H15)

HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) cluster was prepared in the reaction of (Et₄N) [HFe₂Ru₂C(CO)₁₂] with [Pd(η³-ß-C₁₀H₁₅)Cl]₂. X-ray structural study of HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) (where ß-C₁₀H₁₅ is ß-pinenyl) revealed a wing-tip butterfly geometry of the metal core and (1R, 2S, 3S, 5R) absolute configuration for both crystallography independent molecules in the crystal. Chiroptical properties of this cluster are compared with other clusters containing a Pd(η³-ß-C₁₀H₁₅) fragment and discussed.     

Organometallic chemistry of diphosphazanes. Rhodium(I) complexes of RN(PX2)2 (R = C6H5; X = OC6H5, OC6H4Br−p, R = CH3; X = OC6H5)

Reactions of [Rh(COD)Cl]₂ with the ligand RN(PX₂)₂ (1: R = C₆H₅; X = OC₆H₅) give mono- or disubstituted complexes of the type [Rh₂(COD)Cl₂{ν²−C₆H₅N(P(OC₆H₅)₂)₂}] or [RhCl{ν²−C₆H₅ N(P(OC₆H₅)₂)₂ }]₂ depending on the reaction conditions. Reaction of 1 with [Rh(CO)₂Cl]₂ gives the symmetric binuclear complex, [Rh(CO)Cl{μ−C₆H₅N(P(OC₆H₅)₂)₂} ₂, whereas the same reaction with 2 (R = CH₃; X = OC₆H₅) leads to the formation of an asymmetric complex of the type [Rh(CO)(μ−CO)Cl{μ−CH₃N(P(OC₆H₅)₂)₂}₂ containing both terminal and bridging CO groups. Interestingly the reaction of 3 (R = C₆H₅, X = OC₆H₄Br−p with either [Rh(COD)Cl]₂ or [Rh(CO)₂Cl]₂ leads only to the formation of the chlorine bridged binuclear complex, [RhCl{ν²−C₆H₅N(P(OC₆H₄Br−p)₂)₂}]₂. The structural elucidation of the complexes was carried out by elemental analyses, IR and ³¹P NMR spectroscopic data.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Ammonia ruthenium complexes for the access to new hydrido, carbonyl and isocyanide ruthenium-alkynyl derivatives

The potential in preparative chemistry of the precursors trans-[Ru(NH₃)(CC---R¹)(Ph₂PCH₂CH₂PPh₂)₂]PF₆ (3) has been studied. They offer a convenient access, by NH₃ displacement, to new functional alkynyl-ruthenium derivatives. Complexes 3 react with alkynes HCC---R² to give unsymmetrical trans-Ru(---CC---R¹)(---CC---R²)(dppe)₂ compounds 4a-c, and with sodium methoxide in methanol they open the route to a variety of mixed hydride complexes 5a-c, trans-Ru(H)(---CC---R¹)(dppe)₂. In contrast, with carbon monoxide or isocyanides CN---R³ (R³:CH₂Ph, C₆H₁₁, Me₃C) they allow the preparation of cationic derivatives trans-(Ru(CO)(---CC---R¹)(dppe)₂]PF₆ (6a-c) or trans-[Ru(CNR³)(---CC---R¹)(dppe)₂]PF₆ (7a-d).     

The synthesis and structural characterization of carborane oligomers connected by carbon-carbon and carbon-boron bonds between icosahedra

The reaction of dilithiated o-carborane (closo-1,2-Li₂-1,2-C₂B₁₀H₁₀) with CuCl₂ gives 1,1′-bis(o-carborane) (1), 1,3′-bis(o-carborane) (2) and 1,4′-bis(o-carborane) (3). Compound 2 (C₄B₂₀H₂₂) crystallizes in the monoclinic space group P2₁/n with A = 6.9275(6), B = 9.7655(8), C = 12.356(1) Å, β = 90.028(2)° and Z = 2. The structure was solved by direct methods and refined to R = 0.048 and R_w = 0.074. Compound 3 (C₄B₂₀H₂₂) crystallizes in the orthorhombic space group P2₁2₁2₁ with A = 6.8854(5), B = 12.523(1), C = 19.847(1) Å and Z = 4. The structure was solved by direct methods and refined to R = 0.078 and R_w = 0.091. The coupling reaction of dilithiated m-carborane (closo-1,7-Li₂-1,7-C₂B₁₀H₁₀) with CuCl₂ results in the formation of 1,1′-bis(m-carborane) (4) and tetra(m-carborane) (5).     

Molecular structure of the carbon-bound phosphorus ylide complex trans-dichlorobis(benzoyltri-n-butylphosphorane)palladium(II)

The molecular structure of trans-[Pd(PhC(O)CHP(n-C₄H₉)₃)₂Cl₂] has been determined via a single crystal X-ray diffraction study: triclinic,P1,a = 8.876(2),b = 10.908(3),c = 11.938(4)Å, = 97.06(2)°, β = 102.79(2)°, γ = 100.51(2)°,V= 1092.1(5)ų,Z = 1 and R(F) = 4.61%. The phosphorus ylide molecules are bound to the palladium atom through their methine carbon atoms, the overall coordination geometry about the palladium being square planar. The protons in the ortho-positions of the two phenyl group are poised above and below the palladium atom, suggesting that the complex is a precursor of the ortho-metalated complex [Pd(μ-Cl)(C₆H₄C(O)CHP(n-C₄H₉)₃)]₂ synthesized earlier in our laboratory.     

Reactions of tungsten phosphonium carbyne complexes with aryloxide nucleophiles to form aryloxycarbyne and η-ketenyl complexes

Tungsten phosphoranylideneketene complexes of the type Tp′(CO)(p-OC₆H₄R)W(η²-(C,C)---O=CC---PR′₂Ph) (R=NO₂, R′=Me (6a); R=NO₂, R′=Ph (6b); R=CN, R′=Me (7a); R=CN, R′=Ph (7b); R=Cl, R′=Ph (8b)) have been synthesized from phosphonium carbyne precursors in a reaction that reflects coupling of carbonyl and carbyne ligands. In addition to these products, aryloxycarbyne complexes Tp′(CO)₂WCO(p-C₆H₄NO₂) (9a), Tp′(CO)₂WCO(p-C₆H₄CN) (9b), and Tp′(CO)₂WCO(p-C₆H₄Cl) (9c)) have been prepared via substitution of the phosphonium carbyne phosphine with an aryloxide nucleophile. The product ratio of substitution at the carbyne carbon to carbonyl–carbyne coupling can be tuned by variation of the aryloxide para-substituent. Aryloxy carbyne complexes are the favored products with stronger nucleophiles, while weaker nucleophiles result in a mixture of aryloxy carbyne complexes and η²-ketenyl coupled complexes. Formation of η²-ketenyl complexes is favored for the least nucleophilic aryloxides. Ketenyl complexes 6a and 6b were methylated at the ketenyl oxygen to form cationic alkyne complexes [Tp′(CO)(p-OC₆H₄NO₂)W(η²-(C,C)---CH₃OCCPR₂Ph)][OTf] (R=Me (10a), R=Ph (10b)). The structures of η²-ketenyl complexes 6a and 7b and the structure of cationic alkyne complex 10a were determined by X-ray crystallography.     

1,3-dithianes with acid functionalities: potent inhibitors and candidate affinity probes for the gaba-gated chloride channel

2 ,5 -1,3-Dithianes of the type (CH₃)C-CH(CH₂S)₂CH-C₆H₄-CC-R (R = CO₂H, CH₂CH₂CO₂H and CH₂CH₂PO₃H₂) are potent blockers of the GABA-gated chloride channel with 50% inhibition at 5–10 nM. Functionalization of the acid moieties provides candidate photoaffinity ligands [R = C(O)CHN₂ and CH₂CH₂C(O)CHN₂], affinity columns, and hapten-protein conjugates for antibody production.     

Chemistry of vinylidene complexes XI. Synthesis of trinuclear MnFePt complexes by means of consecutive assembling out of mono- and dimetal vinylidene precursors

The dimetal μ-vinylidene complexes Cp(CO)₂MnPt(μ-C = CHPh)L₂ (L = tert.-phosphine or -phosphite), which have been obtained by coupling of the mononuclear complex Cp(CO)₂Mn=C=CHPh and unsaturated PtL₂ unit, add smoothly the Fe(CO)₄ moiety to produce trimetal MnFePt compounds. The μ₃-vinylidene cluster CpMnFePt(μ₃-C=CHPh)(CO)₆(PPh₃) was prepared in quantitative yields from the reactions of Cp(CO)₂MnPt(μ-C=CHPh)(PPh₃)L (L = PPh₃ or CO) with Fe₂(CO)₉ in benzene at 20 °C. The phosphite-substituted complexes Cp(CO)₂Mnpt(μ-C=CHPh)L₂ (L = P(OEt)₃ or P(OPrⁱ)₃) react under analogous conditions with Fe₂(CO)₉ to give mixtures (2:3) of the penta- and hexacarbonyl clusters, CpMnFePt(μ₃-C = CHPh)(CO)₅L₂ and CpMnFePt(μ₃-C = CHPh)(CO)₆L, respectively. The similar reaction of the dimetal complex Cp(CO)₂MnPt(μ-C = CHPh)(dppm), in which the Pt atom is chelated by dppm = Ph₂PCH₂PPhPin2 ligand, gives only a 15% yield of the analogous trimetal μ₃-vinylidene hexacarbonyl product CpMnFePt(μ₃-C = CHPh)(CO)(dppm), but the major product (40%) is the tetranuclear μ₄-vinylidene cluster (dppm)PtFe₃(μ₄-C = CHPh)(CO)₉. The IR and ¹H, ¹³C and ³¹P NMR data for the new complexes are reported and discussed.     

Synthesis and reactivity of early-late heterobimetallic complexes displaying a η-tantalum-alkylidene to palladium interaction

Tantalaalkylidene compounds, CHRTaCl₃L₂ (R=^tBu or CMe₂Ph, L=THF or 1/2dimethoxyethane) mixed with the cyclopalladated dimer [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)]₂, 1, afford good yields of heterodimetallic complexes [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CHR=TaCl₃L], 3a, 3b, in which the TaC unit is η²-interacting with the palladium atom, while a chloride ligand is bridging the tantalum and the palladium atoms. These compounds are fairly stable in air in the solid state and also in solution at RT. The interaction of the TaC unit with Pd in these bimetallic compounds is weak as shown by the ready formation of [Pd(2-C₆H₄CH₂NMe₂)PyCl] and CHRTaCl₃Py₂ upon treatement with pyridine. Compounds analogous to 3a, b can also be obtained with 12 electrons tantalum complexes. Thus treating the same cyclopalladated dimer 1 with CHRTa(OAr)₃ (OAr=2,6-diisopropylphenyloxy) led to a much more stable though electron deficient species: [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CH^tBu=Ta(OAr)₃], 3c. Substitution in 3a of one chloride ion by an alkyl group occurred at the tantalum metal via reaction with ZnR₂ (R=CH₂CMe₂Ph) leading to [Pd(2-C₆H₄CH₂NMe₂)(μ-Cl)(μ-CH^tBu=TaCl₃(CH₂CMe₂Ph)], 4 for which there is no free rotation around the new TaC bond and in which one of the methylene protons is strongly interacting with the palladium centre. This compound is believed to mimic an intermediate to the formation of tantalacarbyne derivative, which was obtained earlier via reaction of the uncomplexed tantalacarbene compound with dialkylzinc compounds.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

Affinity probes for the GABA-gated chloride channel: 5e-tert-Butyl-2e-[4-(substituted-ethynyl)phenyl]-1,3-dithianes with photoactivatable, fluorescent, biotin, agarose and protein substituents

Affinity probes for the noncompetitive blocker or picrotoxinin site of the γ-aminobutyric acid (GABA)-gated chloride channel were designed for four types of applications: photoaffinity reagents to covalently label the binding site; fluorescent probes for receptor analysis; biotinylated compounds and agarose/sepharose conjugates for affinity chromatography; ligand-protein/enzyme conjugates for immunoassay. These 5e-tert-butyl-2e-[4-(substituted-ethynyl)phenyl]-1,3-dithianes were optimized by structure-activity studies for potency as inhibitors of ³H ethynylbicycloorthobenzoate binding to bovine brain membranes, measured as the concentration for 50% inhibition (IC₅₀). Preferred compounds are 5e-(CH₃)₃CCH(CH₂S)₂CH-2e-C₆H₄-4-CCCH₂OCH₂C(O)R, wherein R confers the following properties and 1C₅₀ values: R = SCH₂CH₂SCH₂C(O)C₆H₄-4-N₃, photo-affinity, 9 nM; R = NHCH₂CH₂NHC(O)C₆H₂-2-OH,5-1,4-N₃, photoaffinity, 105 nM; R = SCH₂CH₂S-4-benzofurazan-7-NO₂, fluorescent, 13 nM; R = SCH₂CH₂SCH₂-5-fluorescein, fluorescent, 27 nM; R = NHCH₂CH₂NH[C(O)(CH₂)₅NH]₂-biotin, affinity chromatography, 190 nM. The most potent photoaffinity ligand (IC₅₀ 9 nM) was labeled at 7 Ci mmol⁻¹ by reacting the appropriate thiol with ³H 4-azidophenacyl bromide (obtained by alumina-catalyzed tritium exchange of its enolizable hydrogens). The first steps have been taken in using the NCB site for affinity chromatography of the GABA_A receptor in CHAPS-solubilized bovine brain membranes with the dithiane-biotin probe and an avidin-acrylic bead system or with an analogous dithiane-agarose/sepharose column eluting with GABA or dithiane as above (R = OH). A protein conjugate of a related dithiane-monosulfone elicited production of specific antisera in rabbits. These findings illustrate the diversity and utility of new affinity probes prepared in the alkynylphenyldithiane series.