Biokinetic analyses of adaptation and succession: microbial activity in composting municipal sewage sludge

The interactions between temperature and the microbial communities in composting municipal sewage sludge were studied to determine the optimal temperature range for efficient decomposition (stabilization) of the sludge. Information concerning thermophilic successions in such communities was also obtained. Samples were taken from several different temperature areas in a production-scale composting pile throughout the 19-day processing run. Optimum temperatures for microbial activity, determined as the rate of [14C]acetate incorporation into microbial lipids, were determined for each sample. Biomass was determined from the lipid phosphate content of the sample. Maximal activities were generally found in samples coming from lower-temperature areas (25 to 45 degrees C), whereas samples from high temperatures (55 to 74 degrees C) usually had relatively little activity. The temperature giving the optimum activity in samples incubated at a variety of temperatures during the assay tended to increase as the composting time progressed, but never exceeded about 50 degrees C. Many of these temperature response curves were similar in nature to curves reported for purified enzyme systems and pure cultures of bacteria. Comparisons of the apparent energies of activation calculated for different temperature ranges over time also indicated that the overall community was better adapted to higher temperatures during the latter part of the composting run. It was also found that the relationship between the apparent energies of activation and the apparent energies of inactivation (apparent heats of denaturation) consistently changed with sample temperature throughout the composting run, suggesting that the microbial communities from hotter samples were better adapted to high temperatures than those from cooler samples, and vice versa.(ABSTRACT TRUNCATED AT 250 WORDS)     

Physical and Chemical Correlates of Microbial Activity and Biomass in Composting Municipal Sewage Sludge

Various physical and chemical parameters were monitored to evaluate their influence on the microbial communities present in composting municipal sewage sludge. Temperature, moisture content, depth, pH, protein content, total nitrogen, total carbon, lipid phosphate biomass, and the rates of microbial incorporation of substrates into lipids were measured at several times throughout the 17- to 19-day composting runs. Temperature was found to have the most consistent and dramatic effect on microbial activity and biomass. When temperatures exceeded 55 to 60°C, microbial activity fell dramatically, usually by more than 1 order of magnitude. Microbial activity was generally greatest in samples taken from the 35 to 50°C areas of the composting piles. Changes in the composition of the compost over time included increased pH, increased protein content, and decreased total organic content. The changes in these parameters appeared to reflect the microbial activity and biomass present. The results of this study indicate that the rate of composting may best be optimized by controlling the composting temperatures, provided that the other parameters fall within reasonable limits in the starting material.     

Characteristics of rice straw and sewage sludge as composting materials in Valencia (Spain)

This work supports the idea that composting can be useful for minimizing the rice straw and sewage sludge environmental impact. Several physical, chemical and microbiological properties of these raw materials were analyzed. The characteristics of the rice straw were complementary to those of the sewage sludge for the application of composting. The C/N ratios suitable for a rapid increased in microbial activity were the lowest (17-24). A temperature of 62 degrees C during 48 h removed pathogenic microorganisms from rice straw and sewage sludge mixture. The results obtained in the present work suggested that these materials could be use in the composting process.     

The influence of temperature and moisture contents regimes on the aerobic microbial activity of a biosolids composting blend

To understand the relationships between temperature, moisture content, and microbial activity during the composting of biosolids (municipal wastewater treatment sludge), well-controlled incubation experiments were conducted using a 2-factor factorial design with six temperatures (22, 29, 36, 43, 50, and 57 degrees C) and five moisture contents (30, 40, 50, 60, and 70%). The microbial activity was measured as O2 uptake rate (mg g(-1) h(-1)) using a computer controlled respirometer. In this study, moisture content proved to be a dominant factor impacting aerobic microbial activity of the composting blend. Fifty percent moisture content appeared to be the minimal requirement for obtaining activities greater than 1.0 mg g(-1) h(-1). Temperature was also documented to be an important factor for biosolids composting. However, its effect was less influential than moisture content. Particularly, the enhancement of composting activities induced by temperature increment could be realized by increasing moisture content alone.     

Effect of temperature on bacterial species diversity in thermophilic solid-waste composting.

Continuously thermophilic composting was examined with a 4.5-liter reactor placed in an incubator maintained at representative temperatures. Feed was a mixture of dried table scraps and shredded newspaper wetted to 55% moisture. One run at 49 degrees C (run A) employed a 1:4 feed-to-compost ratio, while the other runs used a 10:1 ratio and were incubated at 50, 55, 60, or 65 degrees C. Due to self-heating, internal temperatures of the composting mass were 0 to 7 degrees C hotter than the incubator. Two full-scale composting plants (at Altoona, Pa., and Leicester, England) were also examined. Plate counts per gram (dry weight) on Trypticase soy broth (BBL Microbiology Systems) with 2% agar ranged from 0.7 X 10(9) to 5.3 X 10(9) for laboratory composting and 0.02 X 10(9) to 7.4 X 10(9) for field composting. Fifteen taxa were isolated, including 10 of genus Bacillus, which dominated all samples except that from run A. Species diversity decreased markedly in laboratory composting at 60 degrees C and above, but was similar for the three runs incubated at 49, 50, and 55 degrees C. The maximum desirable composting temperature based on species diversity is thus 60 degrees C, the same as that previously recommended based on measures of the rate of decomposition.     

Effect of temperature on bacterial species diversity in thermophilic solid-waste composting

Continuously thermophilic composting was examined with a 4.5-liter reactor placed in an incubator maintained at representative temperatures. Feed was a mixture of dried table scraps and shredded newspaper wetted to 55% moisture. One run at 49 degrees C (run A) employed a 1:4 feed-to-compost ratio, while the other runs used a 10:1 ratio and were incubated at 50, 55, 60, or 65 degrees C. Due to self-heating, internal temperatures of the composting mass were 0 to 7 degrees C hotter than the incubator. Two full-scale composting plants (at Altoona, Pa., and Leicester, England) were also examined. Plate counts per gram (dry weight) on Trypticase soy broth (BBL Microbiology Systems) with 2% agar ranged from 0.7 X 10(9) to 5.3 X 10(9) for laboratory composting and 0.02 X 10(9) to 7.4 X 10(9) for field composting. Fifteen taxa were isolated, including 10 of genus Bacillus, which dominated all samples except that from run A. Species diversity decreased markedly in laboratory composting at 60 degrees C and above, but was similar for the three runs incubated at 49, 50, and 55 degrees C. The maximum desirable composting temperature based on species diversity is thus 60 degrees C, the same as that previously recommended based on measures of the rate of decomposition.     

The influence of lignin content and temperature on the biodegradation of lignocellulose in composting conditions

The aim of this research was to study the influence of lignin content and composting temperature on the biodegradation of lignin-containing pulp and paper products in a controlled composting test (European standard prEN 14046). Lignin reduced the biodegradation of the samples, and there was a linear correlation between the lignin content and the biodegradation of pulp and paper products at 58°C. The influence of incubation temperature (35, 50 and 58°C) on biodegradation was studied using bleached kraft paper containing 0.2 wt% lignin and mechanical pulp (stone-ground wood) containing 24–27 wt% lignin. Mechanical pulp biodegraded better at lower temperatures, while kraft paper biodegraded well at all three temperatures. Microbial activity was evaluated by measuring CO₂ evolution and the change in ATP content, and fungal biomass by measuring the ergosterol content during the composting experiments. Kraft paper strongly increased microbial activity during the controlled composting test, but the activity returned to the background level at the end of the composting test. The proportion of sample carbon converted to microbial biomass carbon was considerably higher at lower incubation temperatures. Changes in microbial community structure during biodegradation of mechanical pulp and kraft paper at 50°C were studied by the PCR-based technique denaturing gradient gel electrophoresis. Changes in the microbial community were observed during the intensive degradation phase of kraft paper. Electronic Publication     

Bacterial function and community structure in reactors treating biopolymers and surfactants at mesophilic and thermophilic temperatures

Microbial communities capable of degrading biopolymers and surfactants typically found in graywater were selected in continuous-flow bioreactors operated at 30, 44, 53, or 62°C. The effect of temperature upon microbial activity and community composition was determined. Microbial respiration of the organic components of the medium (including linear alkylbenzene sulfonate) was detected in samples from each reactor. The microbial community in each reactor was adapted to the operating temperature. Nucleic acid-based analyses of community composition showed that distinct consortia were present at each temperature. Community complexity was inversely related to temperature. The specific maintenance rate was twofold higher at 62°C than at the lower temperatures. Under starvation conditions, microbes in the 62°C system lost membrane integrity 30- to 100-fold faster than microbes at lower temperatures. Received 02 April 1999/ Accepted in revised form 17 May 1999     

Temporal microbial diversity changes in solvent-degrading anaerobic granular sludge from low-temperature (15 degrees C) wastewater treatment bioreactors

Anaerobic sludge granules were obtained from laboratory-scale anaerobic bioreactors used to treat pharmaceutical-like (methanol-, acetone- and propanol-contaminated) wastewater under low-temperature conditions (15 degrees C). The microbial diversity and diversity changes of the sludge samples were ascertained by applying 16S rRNA gene cloning and terminal restriction fragment length polymorphism (TRFLP) analyses, respectively, and using sludge samples from the inoculum, throughout and at the conclusion of the bioreactor trial. Data from genetic fingerprinting correlated well with those from physiological activity assays of the reactor biomass. Specifically, for example, TRFLP profiles indicated the dominance of hydrogenotrophic methanogens within the archaeal community, thus supporting the findings of specific methanogenic activity measurements. TRFLP data supported the hypothesis that the deviation between the replicated reactors, in terms of treatment efficiency, was associated with succession within the microbial communities present, and indicated that community development was linked to both operating temperature and wastewater composition. Fluorescence in situ hybridization (FISH) was also applied, to quantitatively assess the abundance of selected microbial groups, and revealed the underestimation of the abundance Methanosarcina by gene cloning analysis and demonstrated the spatial arrangement of these organisms within the architecture of the low-temperature solvent-degrading anaerobic biofilms.     

Monitoring the biological activity of the composting process: Oxygen uptake rate (OUR), respirometric index (RI), and respiratory quotient (RQ)

Composting of several organic wastes of different chemical composition (source-separated organic fraction of municipal solid waste, dewatered raw sludge, dewatered anaerobically digested sludge and paper sludge) was carried out under controlled conditions to study the suitability of different biological indexes (oxygen uptake rate, respirometric index, and respiratory quotient) to monitor the biological activity of the composting process. Among the indexes tested, oxygen uptake rate (also referred to as dynamic respirometric index) provided the most reliable values of microbial activity in a compost environment. On the other hand, values of the static respirometric index measured at process temperature, especially in the early stages of the composting process, were significantly lower than those of the dynamic index, which was probably due to oxygen diffusion limitations present in static systems. Both static and dynamic indexes were similar during the maturation phase. Static respirometric index measured at 37 degrees C should not be used with samples obtained during the thermophilic phase, since it resulted in an underestimation of the respiration values. Respiratory quotient presented only slight variations when changing the process temperature or the waste considered, and its use should be restricted to ensure aerobic conditions in the composting matrix.     

Effect of compost temperature on oxygen uptake rate, specific growth rate and enzymatic activity of microorganisms in dairy cattle manure

Investigations were carried out to find out the relationship between temperature and microbial activity in dairy cattle manure composting using oxygen uptake rate, specific growth rate and enzymatic activities during autothermal and isothermal composting experiments. In autothermal composting, oxygen uptake rate and specific growth rate were found to be most intensive in order of 43 degrees C, 60 degrees C and 54 degrees C. Isothermal composting at 54 degrees C resulted highest levels of enzymatic activity and promoted the volatile solids reduction. Based on the maximum enzymatic activity, specific growth rate appeared to be more closely linked with microbial activity in compost than with oxygen uptake rate. The enhancement of specific growth rate, enzymatic activity and volatile solids reduction were induced at 54 degrees C in cattle manure composting.     

Comparison of organic matter degradation and microbial community during thermophilic composting of two different types of anaerobic sludge

Changes in organic matter degradation and microbial communities during thermophilic composting were compared using two different types of anaerobic sludge, one from mesophilic methane fermentation, containing a high concentration of proteins (S-sludge), and the other from thermophilic methane fermentation, containing high concentrations of lipids and fibers (K-sludge). The difference in the organic matter degradation rate corresponded to the difference in the organic matter constituents; the CO(2) evolution rate was greater in the composting of S-sludge than of K-sludge; moreover, the NH(3) evolution resulting from the protein degradation was especially higher in the composting of S-sludge. Then the differences in the microbial communities that contributed to each composting were determined by the PCR-DGGE method. Ureibacillus sp., which is known as a degrader with high organic matter degradation activity, was observed during the composting of S-sludge, whereas Thermobifida fusca, which is a well known thermophilic actinomycete that produces enzymes for lignocellulose degradation, were observed during the composting of K-sludge.     

Enhancement of the thermophilic stage in cattle waste composting by addition of tofu residue

The microbial degradation and temperature rise during the composting of a cattle waste and rice straw mixture blended with tofu (soybean curd) residue was investigated using an insulated and unheated in-vessel composter (effective volume, 12 1) and a static pile with passive aeration. The addition of 11% (dry weight basis) of tofu residue shortened the time required for temperature to reach the thermophilic phase and increased the duration of the temperatures above 55 degrees C significantly, but the maximum temperature was not affected by the additive level. As shown by the change in BOD, most of the easily biodegradable matter in the tofu residue was consumed during 12 days of composting. The same results were observed in the temperature profile of the static pile with passive aeration. Tofu residue addition yielded a higher maximum temperature and a nearly two times longer duration of temperatures above 55 degrees C in almost all locations of the pile. The use of tofu residue as a co-composting material would promote thermophilic degradation throughout the entire composting mass.     

Composting Process Control Based on Interaction Between Microbial Heat Output and Temperature

Rational composting process control involves the interrelated factors of heat output, temperature, ventilation, and water removal. The heat is released microbially at the expense of organic material; temperature is an effect and, because it is a determinant of microbial activity, it is also a cause of heat output; ventilation supplies oxygen and removes heat, mainly through the vaporization of water; water removal results from heat removal. These relationships were implemented in a field-scale process of static-pile configuration, using a mixture of sewage sludge and wood chips. Heat removal was matched to heat output through a temperature feedback control system, thereby maintaining biologically favorable temperatures. The observations indicate that fundamentally there are two kinds of composting systems: those that are and those that are not temperature self-limiting. The self-limiting system reaches inhibitive temperatures (>60°C) which debilitate the microbial community, suppressing decomposition, heat output, and water removal. In contrast, non-self-limiting temperatures (<60°C) support a robust community, promoting decomposition, heat output, and water removal.     

Comparison of microbial communities in four different composting processes as evaluated by denaturing gradient gel electrophoresis analysis

AIMS: We aimed to systematically understand the composting processes by a comparison of microbial communities during four full-scale composting processes. METHODS AND RESULTS: Microbial communities during the four different full-scale composting processes were analysed by denaturing gradient gel electrophoresis combined with measurement of physicochemical parameters. Two composting processes utilized sewage sludge and two utilized food-waste. Comparison of the four processes indicated that the concentration of dissolved organic carbon was higher in the food-waste-composting than in the sewage-sludge-composting processes, and microbial communities varied with composting substrate. The tendency for different microbes to appear in the composting process with different concentrations of dissolved organic carbon agreed with a previous study that showed that microbial succession occurred with a decrease in dissolved organic carbon in a laboratory-scale food-waste-composting process. CONCLUSIONS: Our results suggested that the main factor affecting microbial communities in the composting process is the concentration of dissolved organic materials. SIGNIFICANCE AND IMPACT OF THE STUDY: In addition to studying microbial communities involved in composting, this research is also the first to study composting mechanisms using molecular methods. The results of our studies may be helpful in the design and management of composting processes.     

Effects of feedstock, airflow rate, and recirculation ratio on performance of composting systems with air recirculation

The thermodynamics, kinetics, and energy use of composting systems with air recirculation were determined for feedstocks comprising paper mill sludge and biosolids. Results were developed by simulating the composting system using a two-dimensional finite difference numerical model. Incorporated into the simulation model was independent regulation of temperature and oxygen using a closed loop feedback control system with a two-stage fan setting. Results showed that at low airflows and high recirculation ratios, heat removal by the exhaust gas was insufficient to maintain set point temperatures with the result that process temperatures increased and eventually limited the reaction rate. Types of feedstock, magnitude of airflow and recirculation ratio all affected the energy use of the system. Although recirculation leads to high energy use, it can produce high quality compost by having a temperature gradient of less than 2 degrees C across the bed.     

Profiling of a microbial community under confined conditions in a fed-batch garbage decomposer by denaturing gradient gel electrophoresis

In order to determine the conditions for the maximum performance of a fed-batch composting (FBC) reactor, polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) was used to analyze the microbial communities established under the confined conditions of moisture content and environmental temperature. To evaluate the effects of microbial community structures on the performance of FBC reactors, degradation experiments using small-scale reactors and model waste were conducted under confined environmental conditions. A high degradation rate was observed under a wide range of MC conditions (30-60%) and at higher than usual temperatures (30-50 degrees C). The microbial communities that formed in the experimental FBC reactors were analyzed by DGGE of PCR-amplified 16S rRNA genes. The DGGE banding patterns at the same level as the degradation rates were similar even if the environmental conditions were different. Sequence analysis of the DGGE bands revealed the primary microbes which act in the reactor.     

用ERIC-PCR结合分子杂交监测焦化废水处理系统(A2/O)中微生物群落结构的变化

建立一种不依赖纯培养 ,可以在废水处理工业现场使用的监测微生物群落结构变化的分子技术。以处理焦化工业废水(A2 /O生物膜工艺 )不同构筑物中的悬浮污泥的微生物群落为研究对象 ,每周采样 1次 ,连续 4周。获得悬浮污泥总 DNA的ERIC- PCR指纹图谱 ,结合分子杂交进一步区分相同条带间的不同序列信息。结果表明 ,在缺氧池 (A2池 )和好氧池 (O池 )之间 ,各个采样点的 ERIC- PCR图谱差异不大 ,悬浮污泥在各构筑物之间交流充分 ;同一采样点的图谱在不同采样时期具有明显差异 ,显示了在此期间微生物群落的连续动态变化过程。通过对生物膜系统中悬浮污泥的微生物群落结构的指纹图谱分析 ,可开发出对该系统微生物群落结构动态变化进行检测的技术     

Comparison of temperature effects on soil respiration and bacterial and fungal growth rates

Temperature is an important factor regulating microbial activity and shaping the soil microbial community. Little is known, however, on how temperature affects the most important groups of the soil microorganisms, the bacteria and the fungi, in situ. We have therefore measured the instantaneous total activity (respiration rate), bacterial activity (growth rate as thymidine incorporation rate) and fungal activity (growth rate as acetate-in-ergosterol incorporation rate) in soil at different temperatures (0-45 degrees C). Two soils were compared: one was an agricultural soil low in organic matter and with high pH, and the other was a forest humus soil with high organic matter content and low pH. Fungal and bacterial growth rates had optimum temperatures around 25-30 degrees C, while at higher temperatures lower values were found. This decrease was more drastic for fungi than for bacteria, resulting in an increase in the ratio of bacterial to fungal growth rate at higher temperatures. A tendency towards the opposite effect was observed at low temperatures, indicating that fungi were more adapted to low-temperature conditions than bacteria. The temperature dependence of all three activities was well modelled by the square root (Ratkowsky) model below the optimum temperature for fungal and bacterial growth. The respiration rate increased over almost the whole temperature range, showing the highest value at around 45 degrees C. Thus, at temperatures above 30 degrees C there was an uncoupling between the instantaneous respiration rate and bacterial and fungal activity. At these high temperatures, the respiration rate closely followed the Arrhenius temperature relationship.