Multiple alanine replacements within alpha-helix 126-134 of T4 lysozyme have independent, additive effects on both structure and stability.

In a systematic attempt to identify residues important in the folding and stability of T4 lysozyme, five amino acids within alpha-helix 126-134 were substituted by alanine, either singly or in selected combinations. Together with three alanines already present in the wild-type structure this provided a set of mutant proteins with up to eight alanines in sequence. All the variants behaved normally, suggesting that the majority of residues in the alpha-helix are nonessential for the folding of T4 lysozyme. Of the five individual alanine substitutions it is inferred that four result in slightly increased protein stability and one, the replacement of a buried leucine with alanine, substantially decreased stability. The results support the idea that alanine is a residue of high helix propensity. The change in protein stability observed for each of the multiple mutants is approximately equal to the sum of the energies associated with each of the constituent substitutions. All of the variants could be crystallized isomorphously with wild-type lysozyme, and, with one trivial exception, their structures were determined at high resolution. Substitution of the largely solvent-exposed residues Asp 127, Glu 128, and Val 131 with alanine caused essentially no change in structure except at the immediate site of replacement. Substitutions of the partially buried Asn 132 and the buried Leu 133 with alanine were associated with modest (< or = 0.4 A) structural adjustments. The structural changes seen in the multiple mutants were essentially a combination of those seen in the constituent single replacements. The different replacements therefore act essentially independently not only so far as changes in energy are concerned but also in their effect on structure. The destabilizing replacement Leu 133-->Ala made alpha-helix 126-134 somewhat less regular. Incorporation of additional alanine replacements tended to make the helix more uniform. For the penta-alanine variant a distinct change occurred in a crystal-packing contact, and the "hinge-bending angle" between the amino- and carboxy-terminal domains changed by 3.6 degrees. This tends to confirm that such hinge-bending in T4 lysozyme is a low-energy conformational change.     

Structural analysis of the temperature-sensitive mutant of bacteriophage T4 lysozyme, glycine 156----aspartic acid

The structure of the mutant of bacteriophage T4 lysozyme in which Gly-156 is replaced by aspartic acid is described. The lysozyme was isolated by screening for temperature-sensitive mutants and has a melting temperature at pH 6.5 that is 6.1 degrees C lower than wild type. The mutant structure is destabilized, in part, because Gly-156 has conformational angles (phi, psi) that are not optimal for a residue with a beta-carbon. High resolution crystallographic refinement of the mutant structure (R = 17.7% at 1.7 A resolution) shows that the Gly----Asp substitution does not significantly alter the configurational angles (phi, psi) but forces the backbone to move, as a whole, approximately 0.6 A away from its position in wild-type lysozyme. This induced strain weakens a hydrogen bond network that exists in the wild-type structure and also contributes to the reduced stability of the mutant lysozyme. The introduction of an acidic side chain reduces the overall charge on the molecule and thereby tends to increase the stability of the mutant structure relative to wild type. However, at neutral pH this generalized electrostatic stabilization is offset by specific electrostatic repulsion between Asp-156 and Asp-92. The activity of the mutant lysozyme is approximately 50% that of wild-type lysozyme. This reduction in activity might be due to introduction of a negative charge and/or perturbation of the surface of the molecule in the region that is assumed to interact with peptidoglycan substrates.     

Fluctuations in free or substrate-complexed lysozyme and a mutant of it detected on x-ray crystallography and comparison with those detected on NMR

A mutant lysozyme in which Arg14 and His15 were deleted together exhibited higher activity toward glycol chitin than the wild-type lysozyme. Moreover, the mutant lysozyme, which is less stable than the wild-type lysozyme by 7 degrees C, showed a shift of temperature dependence of activity to the low temperature side compared with the wild-type lysozyme [Protein Eng. 7, 743-748 (1994)]. In the free enzyme, the internal motion of the mutant lysozyme was similar to that of the wild-type. The internal motions of the wild-type and mutant lysozymes in the enzyme-substrate complex increased more than those in the free enzymes. Moreover, the increased internal motions of the substrate-complexed mutant lysozyme were greater than those of the substrate-complexed wild-type lysozyme in several residues [J. Mol. Biol. 286, 1547-1565 (1999)]. The structure of the mutant lysozyme was very similar to that of the wild-type lysozyme. Both structures were also alike in the complex of the trimer of N-acetyl-D-glucosamine. The mobility from B-factors agreed to some degree with that from order parameters in the regions showing great mobility of the protein, but this was not the case in the regions showing fast motion. However, we came to the same conclusion that the increased activity of the mutant lysozyme is due to the increase in the fluctuation of the lysozyme molecule. B-factor and order parameter do not always exhibit harmony because the time-scale of the analysis of mobility is different. However, they are not incompatible but complementary for detecting precise protein motions.     

Tolerance of T4 lysozyme to proline substitutions within the long interdomain alpha-helix illustrates the adaptability of proteins to potentially destabilizing lesions.

To investigate the ability of a protein to accommodate potentially destabilizing amino acid substitutions, and also to investigate the steric requirements for catalysis, proline was substituted at different sites within the long alpha-helix that connects the amino-terminal and carboxyl-terminal domains of T4 lysozyme. Of the four substitutions attempted, three yielded folded, functional proteins. The catalytic activities of these three mutant proteins (Q69P, D72P, and A74P) were 60-90% that of wild-type. Their melting temperatures were 7-12 degrees C less than that of wild-type at pH 6.5. Mutant D72P formed crystals isomorphous with wild-type allowing the structure to be determined at high resolution. In the crystal structure of wild-type lysozyme the interdomain alpha-helix has an overall bend angle of 8.5 degrees. In the mutant structure the introduction of the proline causes this bend angle to increase to 14 degrees and also causes a corresponding rotation of 5.5 degrees of carboxyl-terminal domain relative to the amino-terminal one. Except for the immediate location of the proline substitution there is very little change in the geometry of the interdomain alpha-helix. The results support the view that protein structures are adaptable and can compensate for potentially destabilizing amino acid substitutions. The results also suggest that the precise shape of the active site cleft of T4 lysozyme is not critical for catalysis.     

The role of cysteine oxidation in the thermal inactivation of T4 lysozyme

Wild-type T4 lysozyme contains unpaired cysteine residues at positions 54 and 97. To investigate the role these residues play in the thermal inactivation of the wild-type, we constructed a double mutant with these cysteines replaced with valine and serine. This molecule, T4 lysozyme (C54V/C97S), is more stable than the wild-type to inactivation at 70 degrees C at pH 6.5 and 8.0. Guanidine hydrochloride reactivation experiments and SDS-PAGE on the inactivated products show that the wild-type is susceptible to varying degrees of oxidative damage, depending on buffer conditions, while the cysteine-minus mutant inactivates only by other pathways. The products of thermal, oxidative inactivation of the wild-type are disulfide-linked oligomers. The dependence of inactivation rate on temperature suggests that the formation of these aggregates depends on prior thermal unfolding of the T4 lysozyme molecule.     

Structural and thermodynamic analysis of the packing of two alpha-helices in bacteriophage T4 lysozyme

Packing interactions in bacteriophage T4 lysozyme were explored by determining the structural and thermodynamic effects of substitutions for Ala98 and neighboring residues. Ala98 is buried in the core of T4 lysozyme in the interface between two alpha-helices. The Ala98 to Val (A98V) replacement is a temperature-sensitive lesion that lowers the denaturation temperature of the protein by 15 degrees C (pH 3.0, delta delta G = -4.9 kcal/mol) and causes atoms within the two helices to move apart by up to 0.7 A. Additional structural shifts also occur throughout the C-terminal domain. In an attempt to compensate for the A98V replacement, substitutions were made for Val149 and Thr152, which make contact with residue 98. Site-directed mutagenesis was used to construct the multiple mutants A98V/T152S, A98V/V149C/T152S and the control mutants T152S, V149C and A98V/V149I/T152S. These proteins were crystallized, and their high-resolution X-ray crystal structures were determined. None of the second-site substitutions completely alleviates the destabilization or the structural changes caused by A98V. The changes in stability caused by the different mutations are not additive, reflecting both direct interactions between the sites and structural differences among the mutants. As an example, when Thr152 in wild-type lysozyme is replaced with serine, the protein is destabilized by 2.6 kcal/mol. Except for a small movement of Val94 toward the cavity created by removal of the methyl group, the structure of the T152S mutant is very similar to wild-type T4 lysozyme. In contrast, the same Thr152 to Ser replacement in the A98V background causes almost no change in stability. Although the structure of A98V/T152S remains similar to A98V, the combination of T152S with A98V allows relaxation of some of the strain introduced by the Ala98 to Val replacement. These studies show that removal of methyl groups by mutation can be stabilizing (Val98----Ala), neutral (Thr152----Ser in A98V) or destabilizing (Val149----Cys, Thr152----Ser). Such diverse thermodynamic effects are not accounted for by changes in buried surface area or free energies of transfer of wild-type and mutant side-chains. In general, the changes in protein stability caused by a mutation depend not only on changes in the free energy of transfer associated with the substitution, but also on the structural context within which the mutation occurs and on the ability of the surrounding structure to relax in response to the substitution.(ABSTRACT TRUNCATED AT 400 WORDS)     

Analysis of the effectiveness of proline substitutions and glycine replacements in increasing the stability of phage T4 lysozyme.

It was previously shown that the two replacements Gly 77-->Ala (G77A) and Ala 82-->Pro (A82P) increase the thermostability of phage T4 lysozyme at pH 6.5. Such replacements are presumed to restrict the degrees of freedom of the unfolded protein and so decrease the entropy of unfolding [B. W. Matthews, H. Nicholson, and W. J. Becktel (1987) Proceedings of the National Academy of Science USA Vol. 84, pp. 6663-6667]. To further test this approach, three additional replacements--G113A, K60P and A93P--have been constructed. On the basis of model building, each of these three replacements was judged to be less than optimal because it would tend to introduce unfavorable van der Waals contacts with neighboring parts of the protein. The presence of such contacts was verified for G113A and K60P by conformational adjustments seen in the crystal structures of these mutant proteins. In the case of G113A there are backbone conformational changes of 0.5-1.0 A in the short alpha-helix, 108-113, that includes the site of substitution. In the case of K60P the pyrrolidine ring shows evidence of strain. The thermal stability of each of the three variants at both pH 2.0 and pH 6.5 was found to be very close to that of wild-type lysozyme. The results suggest that the procedure used to predict sites for both Xaa-->Pro and Gly-->Ala is, in principle, correct. At the same time, the increase in stability expected from substitutions of this type is modest, and can easily be offset by strain associated with introduction of the alanine or proline. This means that the criteria used to select substitutions that will increase thermostability have to be stringent at least. In the case of T4 lysozyme this severely limits the number of sites. The analysis reveals a significant discrepancy between the conformational energy surface predicted for the residue preceding a proline and the conformations observed in crystal structures.     

Selection of stabilized 3-isopropylmalate dehydrogenase of Saccharomyces cerevisiae using the host-vector system of an extreme thermophile, Thermus thermophilus

A leuB strain of Thermus thermophilus TTY1, was transformed with a plasmid vector that directed expression of 3-isopropylmalate dehydrogenase (IPMDH) of Saccharomyces cerevisiae encoded by the LEU2 gene. The original strain could not grow at 50 degrees C without leucine, probably because of the low stability of S. cerevisiae IPMDH. The mutants that could grow without leucine were selected at 50 degrees, 60 degrees, 62 degrees, 65 degrees, 67 degrees, and 70 degrees C, step by step. All the mutant strains except for one isolated at 50 degrees C accumulated mutations. Mutations were serially accumulated: Glu255Val, Asn43Tyr, Ala62Thr, Asn110Lys, and Alal 12Val, respectively, at each step. The analyses of residual activity after heat treatment and the denaturation profile as monitored by circular dichroism showed that thermal stability was increased with accumulation of the mutations. The kinetic parameters of most mutant enzymes were similar to those of the wild type. However, some mutant enzymes showed a reverse correlation between stability and activity: the enzymes with a large increase in thermal stability showed lower activity. Although the wild-type enzyme is unstable in the absence of glycerol, the stabilizing effect of glycerol was not observed for all the mutant enzymes containing the Glu255Val substitution, which is assumed to be located at the hydrophobic interface between two subunits.     

Yeast mutants with enhanced ability to secrete human lysozyme: Isolation and identification of a protease-deficient mutant

Summary Yeast mutant strains which secrete large amounts of human lysozyme were screened using an agar medium containing bacterial cells. Nine mutants secreted over 10 times more lysozyme than the wild-type parent strain. The mRNA levels for lysozyme in the mutants were not higher than that of the wild-type strain. Three of the mutant strains were deficient in carboxypeptidase Y activity. It was found that the protease deficiency was caused by a deficiency in conversion of proenzyme to mature enzyme in ssl1 mutant cells. The ssl1 gene was found to be closely linked to the centromere and determine both the efficiency of secretion of lysozyme and the processing of carboxypeptidase Y.Abbreviations CPY carboxypeptidase Y (yscY) - HLY a synthetic gene for human lysozyme     

Structure of a stabilizing disulfide bridge mutant that closes the active-site cleft of T4 lysozyme.

The engineered disulfide bridge between residues 21 and 142 of phage T4 lysozyme spans the active-site cleft and can be used as a switch to control the activity of the enzyme (Matsumura, M. & Matthews, B.W., 1989, Science 243, 792-794). In the oxidized form the disulfide increases the melting temperature of the protein by 11 degrees C at pH 2. The crystal structure of this mutant lysozyme has been determined in both the reduced and oxidized forms. In the reduced form, the crystal structure of the mutant is shown to be extremely similar to that of wild type. In the oxidized form, however, the formation of the disulfide bridge causes the alpha-carbons of Cys 21 and Cys 142, on opposite sides of the active-site cleft, to move toward each other by 2.5 A. In association with this movement, the amino-terminal domain of the protein undergoes a rigid-body rotation of 5.1 degrees relative to the carboxy-terminal domain. This rotation occurs about an axis passing through the junction of the amino-terminal and carboxy-terminal domains and is also close to the axis that best fits the apparent thermal motion of the amino-terminal domain seen previously in crystals of wild-type lysozyme. Even though the engineered Cys 21-Cys 142 disulfide links together the amino-terminal and carboxy-terminal domains of T4 lysozyme, it does not reduce the apparent mobility of the one domain relative to the other. The pronounced "hinge-bending" mobility of the amino-terminal domain that is suggested by the crystallographic thermal parameters of wild-type lysozyme persists in the oxidized (and reduced) mutant structures. In the immediate vicinity of the introduced disulfide bridge the mutant structure is more mobile (or disordered) than wild type, so much so that the exact conformation of Cys 21 remains obscure. As with the previously described disulfide bridge between residues 9 and 164 of T4 lysozyme (Pjura, P.E., Matsumura, M., Wozniak, J.A., & Matthews, B.W., 1990, Biochemistry 29, 2592-2598), the engineered cross-link substantially enhances the stability of the protein without making the folded structure more rigid.     

Surface histidine residue of archaeal histone affects DNA compaction and thermostability

Archaeal histone, which possesses only the core domain part of eukaryal histone, induced DNA compaction by binding to DNA. Based on structural modeling, tetramer formation by dimer-dimer interaction is considered to require two intermolecular ion pairs formed between histidine and aspartate. To examine the role of the ion pairs on DNA compaction, mutant histones were constructed and analyzed using HpkB from Thermococcus kodakaraensis KOD1 as a model protein. The mutant histones, HpkB-H50A, HpkB-H50V, and HpkB-H50G were constructed by replacing conserved surface His50 with Ala, Val, and Gly, respectively. Circular dichroism analysis indicated no significant difference between wild-type and mutants in their structures. Gel mobility shift assays showed that all mutants possessed DNA binding ability, like wild-type HpkB, however all mutants compacted DNA less efficiently than the wild-type. Moreover, all mutants could not maintain the nucleosome-like structure (compacted form of DNA) above 80 degrees C. These results suggest that surface ion pairs between His and Asp play an important role in maintenance of nucleosome structure and DNA stabilization at high temperature.     

A variant of Orpinomyces joyonii 1,3-1,4-beta-glucanase with increased thermal stability obtained by random mutagenesis and screening

A thermostable variant of an Orpinomyces joyonii beta-glucanase was identified by screening a mutant library constructed using error-prone PCR products. The mutant, designated 2011D, had one amino acid substitution (Val replaced Asp-70). 2011D showed similar catalytic efficiency to its wild-type enzyme, LicA. The temperature at which 50% inactivation occurred after heat treatment for 10 min was increased by 14 degrees C for 2011D, in comparison to those of wild-type enzyme.     

Second-site revertants of an inactive T4 lysozyme mutant restore activity by restructuring the active site cleft

Substitution of Thr26 by Gln in the lysozyme of bacteriophage T4 produces an enzyme with greatly reduced activity but essentially unaltered stability relative to wild type. Spontaneous second-site revertants of the mutant were selected genetically; two of them were chosen for structural and biochemical characterization. One revertant bears (in addition to the primary mutation) the substitution Tyr18----His, the other, Tyr18----Asp. The primary mutant and both revertant lysozyme genes were reconstructed in a plasmid-based expression system, and the proteins were produced and purified. The two revertant lysozymes exhibit enzymatic activities intermediate between wild type and the primary mutant; both also exhibit melting temperatures approximately 3 degrees C lower than either the wild type or the primary mutant. Crystals suitable for X-ray diffraction analysis were obtained from both revertant lysozymes, but not the primary mutant. Structures of the double mutant lysozymes were refined at 1.8-A resolution to crystallographic residuals of 15.1% (Tyr18----His) and 15.2% (Tyr18----Asp). Model building suggests that the side chain of Gln26 in the primary mutant is forced to protrude into the active site cleft, resulting in low catalytic activity. In contrast, the crystal structures of the revertants reveal that the double substitutions (Gln26 and His18, or Gln26 and Asp18) fit into the same space that is occupied by Thr26 and Tyr18 in the wild-type enzyme; the effect is a restructuring of the surface of the active site cleft, with essentially no perturbation of the polypeptide backbone. This restructuring is effected by a novel series of hydrogen bonds and electrostatic interactions that apparently stabilize the revertant structures.     

Role of surface hydrophobic residues in the conformational stability of human lysozyme at three different positions

To evaluate the contribution of the amino acid residues on the surface of a protein to its stability, a series of hydrophobic mutant human lysozymes (Val to Gly, Ala, Leu, Ile, Met, and Phe) modified at three different positions on the surface, which are located in the alpha-helix (Val 110), the beta-sheet (Val 2), and the loop (Val 74), were constructed. Their thermodynamic parameters of denaturation and crystal structures were examined by calorimetry and by X-ray crystallography at 100 K, respectively. Differences in the denaturation Gibbs energy change between the wild-type and the hydrophobic mutant proteins ranged from 4.6 to -9.6 kJ/mol, 2.7 to -1.5 kJ/mol, and 3.6 to -0.2 kJ/mol at positions 2, 74, and 110, respectively. The identical substitution at different positions and different substitutions at the same position resulted in different degrees of stabilization. Changes in the stability of the mutant proteins could be evaluated by a unique equation considering the conformational changes due to the substitutions [Funahashi et al. (1999) Protein Eng. 12, 841-850]. For this calculation, secondary structural propensities were newly considered. However, some mutant proteins were not adapted to the equation. The hydration structures around the mutation sites of the exceptional mutant proteins were affected due to the substitutions. The stability changes in the exceptional mutant proteins could be explained by the formation or destruction of the hydration structures. These results suggest that the hydration structure mediated via hydrogen bonds covering the protein surface plays an important role in the conformational stability of the protein.     

Use of site-directed mutagenesis to obtain isomorphous heavy-atom derivatives for protein crystallography: cysteine-containing mutants of phage T4 lysozyme

Five different cysteine-containing mutants of the lysozyme from bacteriophage T4 were used to explore the feasibility of using site-directed mutagenesis to generate isomorphous heavy-atom derivatives for protein crystallography. Cysteines 54 and 97, present in wild-type lysozyme, can be readily reacted with mercuric ion to produce an excellent isomorphous heavy-atom derivative. Mutants with an additional cysteine at position 86, 146, 153 or 157, or with Cys 97 replaced by Val, were engineered by site-directed mutagenesis. The mutant lysozyme Thr 157----Cys reacts with mercuric chloride to give an excellent new derivative although Cys 157 is only approximately 60% substituted with the heavy atom. The cysteine at position 146 is largely buried but reacts readily with mercuric chloride. In this case the isomorphism is poor and the resultant derivative is of marginal quality. Cys 153 reacts rapidly with mercuric ion but the derivative crystals do not diffract. The mutant Pro 86----Cys does not yield a particularly good heavy-atom derivative. This is due in part to a loss of isomorphism associated with the mutation. In addition, Cys 86 shows very little reactivity towards mercurials even though it is fully exposed to solvent. The mutation Cys 97----Val was used to explore the possibility of creating an independent derivative by deleting a heavy-atom site already present in wild-type lysozyme. In all cases that were tested, the quality of the heavy-atom derivative was improved by using as an isomorphous pair mercury-substituted mutant versus non-substituted mutant rather than mercury-substituted mutant versus (non-substituted) wild-type lysozyme.(ABSTRACT TRUNCATED AT 250 WORDS)     

Crystal structures of K33 mutant hen lysozymes with enhanced activities

Using random mutagenesis, we previously obtained K33N mutant lysozyme that showed a large lytic halo on the plate coating Micrococcus luteus. In order to examine the effects of mutation of K33N on enzyme activity, we prepared K33N and K33A mutant lysozymes from yeast. It was found that the activities of both the mutant lysozymes were higher than those of the wild-type lysozyme based on the results of the activity measurements against M. luteus (lytic activity) and glycol chitin. Moreover, 3D structures of K33N and K33A mutant lysozyme were solved by X-ray crystallographic analyses. The side chain of K33 in the wild-type lysozyme hydrogen bonded with N37 involved in the substrate-binding region, and the orientation of the side chain of N37 in K33 mutant lysozymes were different in the wild-type lysozyme. These results suggest that the enhancement of activity in K33N mutant lysozyme was due to an alteration in the orientation of the side chain of N37. On the other hand, K33N lysozyme was less stable than the wild-type lysozyme. Lysozyme may sacrifice its enzyme activity to acquire the conformational stability at position 33.     

The effects of multiple ancestral residues on the Thermus thermophilus 3-isopropylmalate dehydrogenase

Previously, we showed that mutants of Thermus thermophilus 3-isopropylmalate dehydrogenase (IPMDH) each containing a residue (ancestral residue) that had been predicted to exist in a postulated common ancestor protein often have greater thermal stabilities than does the contemporary wild-type enzyme. In this study, the combined effects of multiple ancestral residues were analyzed. Two mutants, containing multiple mutations, Sup3mut (Val181Thr/Pro324Thr/Ala335Glu) and Sup4mut (Leu134Asn/Val181Thr/Pro324Thr/Ala335Glu) were constructed and show greater thermal stabilities than the wild-type and single-point mutant IPMDHs do. Most of the mutants have similar or improved catalytic efficiencies at 70 degrees C when compared with the wild-type IPMDH.     

Isolation and characterization of an Escherichia coli mutant having temperature-sensitive farnesyl diphosphate synthase.

The screening of a collection of highly mutagenized strains of Escherichia coli for defects in isoprenoid synthesis led to the isolation of a mutant that had temperature-sensitive farnesyl diphosphate synthase. The defective gene, named ispA, was mapped at about min 10 on the E. coli chromosome, and the gene order was shown to be tsx-ispA-lon. The mutant ispA gene was transferred to the E. coli strain with a defined genetic background by P1 transduction for investigation of its function. The in vitro activity of farnesyl diphosphate synthase of the mutant was 21% of that of the wild-type strain at 30 degrees C and 5% of that at 40 degrees C. At 42 degrees C the ubiquinone level was lower (66% of normal) in the mutant than in the wild-type strain, whereas at 30 degrees C the level in the mutant was almost equal to that in the wild-type strain. The polyprenyl phosphate level was slightly higher in the mutant than in the wild-type strain at 30 degrees C and almost the same in both strains at 42 degrees C. The mutant had no obvious phenotype regarding its growth properties.     

What is the average conformation of bacteriophage T4 lysozyme in solution? A domain orientation study using dipolar couplings measured by solution NMR

Lysozyme from T4 bacteriophage is comprised of two domains that are both involved in binding substrate. Although wild-type lysozyme has been exclusively crystallized in a closed form that is similar to the peptidoglycan-bound conformation, a more open structure is thought to be required for ligand binding. To determine the relative arrangement of domains within T4 lysozyme in the solution state, dipolar couplings were measured in several different dilute liquid crystalline media by solution NMR methods. The dipolar coupling data were analyzed with a domain orientation procedure described previously that utilizes high- resolution X-ray structures. The cleft between the domains is significantly larger in the average solution structure than what is observed in the X-ray structure of the ligand-free form of the protein (approximately 17 degrees closure from solution to X-ray structures). A comparison of the solution domain orientation with X-ray-derived structures in the protein data base shows that the solution structure resembles a crystal structure obtained for the M6I mutant. Dipolar couplings were also measured on the lysozyme mutant T21C/T142C, which was oxidized to form an inter-domain disulfide bond (T4SS). In this case, the inter-domain solution structure was found to be more closed than was observed in the crystal (approximately 11 degrees). Direct refinement of lysozyme crystal structures with the measured dipolar couplings using the program CNS, establishes that this degree of closure can be accommodated whilst maintaining the inter-domain cystine bond. The differences between the average solution conformations obtained using dipolar couplings and the crystal conformations for both forms of lysozyme investigated in this study illustrate the impact that crystal packing interactions can have on the arrangement of domains within proteins and the importance of alternative methods to X-ray crystallography for evaluating inter-domain structure.     

The role of quaternary interactions on the stability and activity of ascorbate peroxidase.

Point mutations at the dimer interface of the homodimeric enzyme ascorbate peroxidase (APx) were constructed to assess the role of quaternary interactions in the stability and activity of APx. Analysis of the APx crystal structure shows that Glu112 forms a salt bridge with Lys20 and Arg24 of the opposing subunit near the axis of dyad symmetry between the subunits. Two point mutants, E112A and E112K, were made to determine the effects of a neutral (alanine) and repulsive (lysine) mutation on dimerization, stability, and activity. Gel filtration analysis indicated that the ratio of the monomer to dimer increased as the dimer interface interactions went from attractive to repulsive. Differential scanning calorimetry (DSC) data exhibited a decrease in both the transition temperature (Tm) and enthalpy of unfolding (deltaHc) with Tm = 58.3 +/- 0.5 degrees C, 56.0 +/- 0.8 degrees C, and 53.0 +/- 0.9 degrees C and deltaHc = 245 +/- 29 kcal/mol, 199 +/- 38 kcal/mol, and 170 +/- 25 kcal/mol for wild-type APx, E112A, and E112K, respectively. Similar changes were observed based on thermal melting curves obtained by absorption spectroscopy. No change in enzyme activity was found for the E112A mutant, and only a 25% drop in activity was observed for the E112K mutant which demonstrates that the non-Michaelis Menten kinetics of APx is not due to the APx oligomeric structure. The cryogenic crystal structures of the wild-type and mutant proteins show that mutation induced changes are limited to the dimer interface including an alteration in solvent structure.