Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.     

An 18-base-pair sequence is sufficient for termination of rolling-circle replication of plasmid pT181.

pT181 and related plasmids of gram-positive bacteria replicate by a rolling-circle mechanism. The replication initiator protein of pT181, RepC, has origin-specific nicking-closing activities. Replication of the plasmid pT181 leading strand initiates by covalent extension of the RepC-generated nick, and the origin of replication contains signals for both initiation and termination of DNA replication. We have investigated the sequence requirements for the initiation and termination steps by using plasmids containing two pT181 origins. In vitro replication experiments showed that 18- and 24-bp synthetic oligonucleotides containing the RepC nick site were active in the termination of replication. However, initiation of replication required a larger region which also includes the RepC binding site. Plasmids containing the 18- and 24-bp region were also found to be nicked by the RepC protein. Our results demonstrate that sequence requirements for initiation and termination of pT181 replication overlap, but while the RepC binding site is required for initiation, it is dispensable for termination.     

Initiation and termination of DNA transfer during conjugation of IncI1 plasmid R64: roles of two sets of inverted repeat sequences within oriT in termination of R64 transfer

Intercellular transfer of plasmid DNA during bacterial conjugation initiates and terminates at a specific origin of transfer, oriT. We have investigated the oriT structure of conjugative plasmid R64 with regard to the initiation and termination of DNA transfer. Using recombinant plasmids containing two tandemly repeated R64 oriT sequences with or without mutations, the subregions required for initiation and termination were determined by examining conjugation-mediated deletion between the repeated oriTs. The oriT subregion required for initiation was found to be identical to the 44-bp oriT core sequence consisting of two units, the conserved nick region sequence and the 17-bp repeat A sequence, that are recognized by R64 relaxosome proteins NikB and NikA, respectively. In contrast, the nick region sequence and two sets of inverted repeat sequences within the 92-bp minimal oriT sequence were required for efficient termination. Mutant repeat A sequences lacking NikA-binding ability were found to be sufficient for termination, suggesting that the inverted repeat structures are involved in the termination process. A duplication of the DNA segment between the repeated oriTs was also found after mobilization of the plasmid carrying initiation-deficient but termination-proficient oriT and initiation-proficient but termination-deficient oriT, suggesting that the 3' terminus of the transferred strand is elongated by rolling-circle-DNA synthesis.     

Sequence requirements for the termination of rolling-circle replication of plasmid pT181

Most small multicopy plasmids of Gram-positive bacteria and many in Gram-negative bacteria replicate by a rolling-circle (RC) mechanism. The replication initiator proteins encoded by the RC plasmids and single-stranded bacteriophages of Escherichia coli have origin-specific nicking-closing activities that are required for the initiation and termination of RC replication. We have investigated the sequence requirements for termination of RC replication of plasmid pT181. The initiator nick site is located in the loop of a hairpin region (IRII) within the pT181 origin of replication. By mutational analysis, we have found that several nucleotides within the stem of IRII which are critical for the initiation activity are dispensable for termination of replication. We also demonstrate that nucleotides in the right arm of IRII, but not the left arm, are absolutely required for termination of RC replication. We have also identified specific nucleotides in IRII that are critical for its termination activity. The sequence of the right arm of the hairpin must be located downstream of the initiator nick site for termination, suggesting that termination requires a specific orientation of the initiator protein at the origin.     

Sequence Analysis of a Small Cryptic Plasmid Isolated from Streptococcus suis Serotype 2

A small cryptic plasmid designated pSSU1 was isolated from Streptococcus suis serotype 2 strain DAT1. The complete sequence of pSSU1 was 4975 bp and contained six major open reading frames (ORFs). ORF1 and ORF2 encode for proteins highly homologous to CopG and RepB of the pMV158 family, respectively. ORF5 encodes for a protein highly homologous to Mob of pMV158. ORF4 encodes for a protein highly homologous to orf3 of pVA380-1 of S. ferus, but its function is unknown. There was no similarity between ORF3 and ORF6 and other protein sequences. In this plasmid, the ORF1 (CopG protein) was preceded by two multiples of direct repeat and the conserved nucleotides that could be the double-strand origin (DSO) of rolling circle replication (RCR) mechanism. The ORF5 (Mob protein) was followed by a potential hairpin loop that could be the single-strand origin (SSO) of RCR mechanism. The sequence, which was complementary to the leader region of Rep mRNA, was homologous to the countertranscribed RNA (ctRNA) of pLS1. Moreover, a 5-amino acid conserved sequence was found in C terminal of Rep and putative Rep proteins of several pMV158 family plasmids. These observations suggest that this plasmid replicates by use of the rolling circle mechanism. Received: 26 June 1999 / Accepted: 10 August 1999     

Sequence Analysis of Small Cryptic Plasmids Isolated from Selenomonas ruminantium S20

Two small cryptic plasmids designated pONE429 and pONE430 were isolated from a rumen bacterium, Selenomonas ruminantium S20. The complete sequence of pONE429 was 2100 bp and contained one open reading frame (ORF) of 201 amino acids. The sequence of pONE430 had 1527 bp and one ORF of 171 amino acids with the similarity of replication protein (Rep protein) of pOM1, pSN2, and pIM13 isolated from Butyrivibrio fibrisolvens, Staphylococcus aureus, and Bacillus subtilis, respectively. In these plasmids, the upstream nucleotide sequence of Rep protein had the conserved nucleotides which could be double-strand origin (DSO) of rolling circle replication (RCR) mechanism. The plasmids of pONE429, pONE430, pJJMI, pJDB21, and pS23 were isolated from S. ruminantium strains and had similar regions that were located within a <450-bp nucleotide. These similar regions may be the location that was recognized by the host strain, S. ruminantium. Received: 10 July 1998 / Accepted: 11 September 1998     

Characterization of the specific DNA nicking activity of restriction endonuclease N.BstNBI

N.BstNBI is a unique restriction endonuclease isolated from Bacillus stearothermophilus. We have characterized the recognition sequence and the cleavage site of N.BstNBI. Mapping of cleavage sites of N.BstNBI showed that it recognizes an asymmetric sequence, 5' GAGTC 3', and cleaves only on the top strand 4 base pairs away from its recognition sequence. To verify the nicking activity of N. BstNBI, we have constructed two plasmids containing a single recognition sequence (pNB1) or no recognition site (pNB0). When pNB1 and pNB0 were incubated with the enzyme, N.BstNBI nicked only the plasmid pNB1, suggesting that N.BstNBI is a specific nicking endonuclease.     

Characterization,sequence and mode of replication of plasmid pNB2 from the thermophilic bacterium Clostridium thermosaccharolyticum

The 1882-bp nucleotide sequence of the cryptic plasmid pNB2 isolated from the thermophilic bacterium Clostridium thermosaccharolyticum was determined. pNB2 DNA has very low GC content (27%) and may serve as a model for studying the modes of maintenance and replication of AT-rich DNA under conditions of thermophilic growth. The plasmid sequence revealed three open reading frames (ORFs) which would encode polypeptides of 289, 68 and 59 amino acids, respectively, and these proteins were synthesized in E. coli extracts primed with the plasmid. We found that the product of ORF289 may be initiated at the non-ATG start codon, TTG, and has similarities with the conserved motifs of Rep proteins encoded by rolling circle (RC) plasmids of the pC194/pUB110 family. Southern hybridization analysis of lysates of C. thermosaccharolyticum cells harboring pNB2 revealed single-stranded intermediates, suggesting that this plasmid is able to replicate in clostridial cells via the RC mechanism. The most significant similarities are found between pNB2 Rep protein and the Rep proteins of three RC plasmids of the pC194 family (pTB913, pBC1 and pST1) isolated from thermophilic bacteria. Comparative analysis of these Rep proteins showed that despite the significant level of divergence, these Rep proteins share a high degree of similarity in the regions of five well-known conserved domains of RC Rep proteins and fall into two groups in accordance with the similarities found in their active sites.     

Characterization, sequence and mode of replication of plasmid pNB2 from the thermophilic bacterium Clostridium thermosaccharolyticum

 The 1882-bp nucleotide sequence of the cryptic plasmid pNB2 isolated from the thermophilic bacterium Clostridium thermosaccharolyticum was determined. pNB2 DNA has very low GC content (27%) and may serve as a model for studying the modes of maintenance and replication of AT-rich DNA under conditions of thermophilic growth. The plasmid sequence revealed three open reading frames (ORFs) which would encode polypeptides of 289, 68 and 59 amino acids, respectively, and these proteins were synthesized in E. coli extracts primed with the plasmid. We found that the product of ORF289 may be initiated at the non-ATG start codon, TTG, and has similarities with the conserved motifs of Rep proteins encoded by rolling circle (RC) plasmids of the pC194/pUB110 family. Southern hybridization analysis of lysates of C. thermosaccharolyticum cells harboring pNB2 revealed single-stranded intermediates, suggesting that this plasmid is able to replicate in clostridial cells via the RC mechanism. The most significant similarities are found between pNB2 Rep protein and the Rep proteins of three RC plasmids of the pC194 family (pTB913, pBC1 and pST1) isolated from thermophilic bacteria. Comparative analysis of these Rep proteins showed that despite the significant level of divergence, these Rep proteins share a high degree of similarity in the regions of five well-known conserved domains of RC Rep proteins and fall into two groups in accordance with the similarities found in their active sites. Received: 25 April 1996 / Accepted: 20 June 1996     

Role of the double-strand origin cruciform in pT181 replication

pT181 is a small rolling-circle plasmid from Staphylococcus aureus whose initiator protein, RepC, melts the plasmid's double-strand origin (DSO) and extrudes a cruciform involving IR II, a palindrome flanking the initiation nick site. We have hypothesized that the cruciform is required for initiation, providing a single-stranded region for the assembly of the replisome (R. Jin et al., 1997, EMBO J. 16, 4456-4566). In this study, we have tested the requirement for cruciform extrusion by disrupting the symmetry of the IR II palindrome or by increasing its length. The modified DSOs were tested for replication with RepC in trans. Rather surprisingly, disruption of the IR II symmetry had no detectable effect on replication or on competitivity of the modified DSO, though plasmids with IR II disrupted were less efficiently relaxed than the wild type by RepC. However, in conjunction with IR II disruption, modification of the tight RepC binding site IR III blocked replication. These results define two key elements of the pT181 initiation mechanism--the IR II conformation and the RepC binding site (IR III)--and they indicate that pT181 replication initiation is sufficiently robust to be able to compensate for significant modifications in the configuration of the DSO.     

Mutational analysis of the R64 oriT region: requirement for precise location of the NikA-binding sequence.

Conjugative DNA transfer of IncI1 plasmid R64 is initiated by the introduction of a site- and strand-specific nick into the origin of transfer (oriT). In R64 oriT, 17-bp (repeat A and B) and 8-bp inverted-repeat sequences with mismatches are located 8 bp away from the nick site. The nicking is mediated by R64 NikA and NikB proteins. To analyze the functional organization of the R64 oriT region, various deletion, insertion, and substitution mutations were introduced into a 92-bp minimal R64 oriT sequence and their effects on oriT function were investigated. This detailed analysis confirms our previous prediction that the R64 oriT region consists of an oriT core sequence and additional sequences necessary for full oriT activity. The oriT core sequence consists of the repeat A sequence, which is recognized by R64 NikA protein, and the nick region sequence, which is conserved among various origins of transfer and is most probably recognized by NikB protein. The oriT core sequence is sufficient for NikAB-mediated oriT-specific nicking. Furthermore, it was shown that the repeat A sequence is essential for localization to a precise position relative to the nick site for oriT function. This seems to be required for the formation of a functional ternary complex consisting of NikA and NikB proteins and oriT DNA. The repeat B sequence and 8-bp inverted repeat sequences are suggested to be required for the termination of DNA transfer.     

Bacillus anthracis and Bacillus cereus PcrA helicases can support DNA unwinding and in vitro rolling-circle replication of plasmid pT181 of Staphylococcus aureus

Replication of rolling-circle replicating (RCR) plasmids in gram-positive bacteria requires the unwinding of initiator protein-nicked plasmid DNA by the PcrA helicase. In this report, we demonstrate that heterologous PcrA helicases from Bacillus anthracis and Bacillus cereus are capable of unwinding Staphylococcus aureus plasmid pT181 from the initiator-generated nick and promoting in vitro replication of the plasmid. These helicases also physically interact with the RepC initiator protein of pT181. The ability of PcrA helicases to unwind noncognate RCR plasmids may contribute to the broad-host-range replication and dissemination of RCR plasmids in gram-positive bacteria.     

Conjugal mobilization of plasmid DNA: termination frequency at the origin of transfer of plasmid R1162.

Conjugal transfer of plasmid R1162 is initiated and terminated at a 38-bp origin of transfer (oriT). Plasmids containing two directly repeated copies of oriT were used to determine the actual frequency of termination at this site. This frequency was calculated both for oriTnic, a mutated origin that cannot act as the initiation site of transfer, and for an unmutated oriT where transfer had been initiated. In both cases, the termination frequency decreased as the distance between the initiation and termination sites became greater and was significantly less than one for plasmids the size of R1162. A substantial proportion of recipient cells received more than one plasmid copy during transfer. Our results indicate that termination is inefficient but that this is partly compensated for by the transmission of multiple plasmid copies.     

Characterization of a small cryptic plasmid,pHP51, from a Korean isolate of strain 51 of Helicobacter pylori

The nucleotide sequence of a 3955-bp Helicobacter pylori plasmid, pHP51 was determined, and two open reading frames, ORF1 and ORF2, were identified. The deduced amino acid sequence of ORF1 was highly conserved (87-89%) among plasmid replication initiation proteins, RepBs. The function of ORF2 was not assigned because it lacked known functional domains or sequence similarity with other known proteins, although it had a HPFXXGNG motif that was also found in the cAMP-induced filamentation (fic) gene. Three kinds of repeats were present on the plasmid outside of the ORFs, including the R1 and R2 repeats that are common in H. pylori plasmids. One 100-bp sequence detected in the noncoding region of pHP51 was highly similar to the genomic sequence of H. pylori 26695.     

Localization of the nic site of IncN conjugative plasmid pCU1 through formation of a hybrid oriT.

The N-type oriT of plasmid pMUR274 was cloned on a 474-bp RsaI-SspI fragment, and the nucleotide sequence was determined. A comparison of the pMUR274 oriT sequence and the sequence of the oriTs of IncN plasmid pCU1 and IncW plasmid R388 demonstrated 57 and 28% identity, respectively. Intramolecular, site-specific recombination between the pCU1 oriT and the oriT of pMUR274 resulted in the formation of a hybrid oriT containing one half of each parental sequence. The junction point of the hybrid occurred within a 10-bp sequence, GCTATACACC, present in both parental sequences and represents the nic site of each oriT. Mutation of the first A or second T residue within the 10-bp junction sequence reduced transfer less than 20-fold, while mutation of either the second or third A residue reduced transfer over 1,000-fold. Site-specific recombination between a wild-type pCU1 oriT and these four mutant pCU1 oriTs demonstrated that nic lies between the second T and second A residues of the 10-bp junction sequence. Site-specific recombination between wild-type and mutant pCU1 oriTs also demonstrated that point mutations to the right of nic reduced both initiation and termination of transfer while point mutations to the left of nic reduced termination but had little or no effect on initiation. A 28-bp deletion within the AT-rich region 39 bases to the right of nic reduced both initiation and termination, while deletion of a 6-bp inverted repeat sequence at the right-most boundary of the minimal oriT region reduced initiation but not termination.     

The mobilization and origin of transfer regions of a Thiobacillus ferrooxidans plasmid: relatedness to plasmids RSF1010 and pSC101

The components for the mobilization function of a plasmid DNA during conjugation include a cis-acting sequence (the origin of transfer, oriT) and a transacting sequence coding for mobilization (Mob) proteins. By genetic and deletion analysis, we have located the mobilization region of pTF1, a cryptic plasmid previously isolated from a Thiobacillus ferrooxidans strain. Within a 2797 bse-pair sequenced region, several open reading frames (ORFs) were predicted; two of the ORFs are divergently transcribed and they encode proteins of calculated molecular masses, 42.6kD (ORF2) and 11.4kD (ORF6). Surprisingly, these protein sequences are substantially similar to two of the previously characterized mobilization proteins of the Escherichia coli IncQ plasmid, RSF1010. Moreover, the pTF1 ORF2 (now designated MobL) sequence is also found to be similar to a presumed mobilization protein of plasmid pSC101. Regions of sequence identity of plasmids pTF1, RSF1010 and pSC101 include their oriT sites. By alkaline agarose gel electrophoresis and DNA sequencing, we have established the location of the relaxation complex nick site within the oriT of pTF1. An identical nick site, which is adjacent to a characteristic 10 base-pair inverted repeat sequence, is also found for plasmid RSF1010. A recombinant plasmid containing a 42 base-pair synthetic piece of DNA encompassing the pTF1 inverted repeat and nick sequence was shown to be oriT-active.     

Plus-origin mapping of single-stranded DNA plasmid pE194 and nick site homologies with other plasmids.

Staphylococcus aureus plasmid pE194 manifests a natural thermosensitivity for replication and can be established in several species, both gram positive and gram negative, thus making it attractive for use as a delivery vector. Like most characterized plasmids of gram-positive bacteria, pE194 generates single-stranded DNA. The direction of pE194 replication is clockwise, as determined by the strandedness of free single-stranded DNA. Significant homology exists between a 50-base-pair sequence in the origin of pE194 and sequences present in plasmids pMV158 (Streptococcus agalactiae), pADB201 (Mycoplasma mycoides), and pSH71 (Lactococcus lactis). We used an initiation-termination reaction, in which pE194 initiates replication at its own origin and is induced to terminate at the related pMV158 sequence, to demonstrate that pE194 replicates by a rolling-circle mechanism; the initiation nick site was localized to an 8-base-pair sequence.     

Effects of different nitrogen sources on lignocellulose degradation and APPL production

Naphthalene utilizing bacteria were isolated from several sites above and below the discharge from a coking plant. The distribution of the bacteria was influenced by the effluent. Of these isolates, 11·4% obtained from the effluent discharge site, contained plasmids. No conjugal transfer of naphthalene utilizing ability was observed in over 1000 matings. Curing and transformation experiments demonstrated that one plasmid pNB33 (101 kb) was concerned with naphthalene catabolism.