A mechanically strong matrix for protein electrophoresis with enhanced silver staining properties.

Duracryl is a mechanically strong and elastic acrylamide-based matrix, useful for a wide variety of electrophoretic applications. The matrix is stable as a refrigerated solution for one year. Upon addition of appropriate catalysts, Duracryl forms a polymer-reinforced polyacrylamide gel matrix suitable for electrophoresis. The polymer-reinforced gel is superior to conventional polyacrylamide gels in terms of mechanical strength, elasticity and protein silver staining properties. Protein detection sensitivity by silver staining, as well as the linear response of silver deposition versus protein load, is equivalent to standard acrylamide/N,N'-methylene bisacrylamide gels. Additionally, the silver staining properties of the Duracryl matrix result in proteins appearing as monochromatic shades of grey instead of red, brown and yellow, as is the case of conventional polyacrylamide matrices. Monochromatic shades of grey are more suitable for image analysis and densitometry. The matrix is compatible with standard electroblotting and protein N-terminal sequencing procedures. Low acrylic acid content and conductivity allow incorporation of the matrix into isoelectric focusing gels. The matrix was found not to alter polypeptide migration relative to the standard acrylamide/N,N'-methylene bisacrylamide matrix.     

An optimized procedure for sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of hydrophobic peptides from an integral membrane protein

A procedure for successful analysis of the hydrophobic tryptic peptides of the Neurospora crassa plasma membrane H+-ATPase by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) is described. The features of this procedure that are essential for the best results include (i) treatment of the hydrophobic peptide samples with neat trifluoroacetic acid, (ii) dissolution and disaggregation of the hydrophobic peptide samples with SDS at 0 degrees C, (iii) SDS-PAGE of the hydrophobic peptide samples in gels containing a 200:1 ratio of acrylamide to bisacrylamide and a 5-20% convex acrylamide gradient, and (iv) silver-staining of the gels after electrophoresis. This method results in the reproducible resolution and visualization of the H+-ATPase hydrophobic tryptic peptides, which range in size from ca. 5 to 21 kDa, as well as other peptides and proteins ranging in size from ca. 2.5 to 150 kDa. The methods described should also prove useful in other studies where resolution and visualization of hydrophobic peptides of integral membrane proteins are required.     

Polyacrylamide gels with modified cross-linkages

The retention of low molecular weight proteins during electrophoresis through gradient polyacrylamide gels was improved when a gradient of N,N′,N″-triallyl citric triamide (TACT) was superimposed on the gradient of acrylamide and N,N′-methylenebisacrylamide (MBA). Gels cross-linked only with N,N′-(1,2-dihydroxyethylene)bisacrylamide (DHEBA) are soluble in dilute periodic acid or dilute aqueous solutions of bases. DHEBA cross-linked gradient gels have a smaller pore structure at high acrylamide concentrations and a more open structure at low acrylamide concentrations than gels cross-linked with MBA. Proteins labeled with tritium and carbon-14 were fractionated through DHEBA cross-linked gradient gels and the isotopes measured after solution of the gel with periodic acid. The mild solubilizing conditions enhanced isotope resolution. The characteristics of several cross-linking molecules are discussed and reasons advanced for the superiority of those with acrylamido end groups.     

Reversible covalent immobilization of ligands and proteins on polyacrylamide gels

Ligands and proteins were covalently but reversibly immobilized on polyacrylamide gels using novel acrylic monomers whose syntheses are reported here. These reagents have an acrylyl group at one end for copolymerization into gels, an N-succinimidyl ester at the other allowing rapid immobilization of molecules having an available primary amino group, and a cleavable disulfide bond in the middle. Two immobilization methods were developed using these reagents. In the first method, a ligand with a primary amino group was treated with the immobilization reagent in anhydrous ethanol and the resulting amide derivative was purified and copolymerized with acrylamide and bisacrylamide resulting in the desired reversible immobilization. In the second method, the immobilization reagents (at densities up to 50 mumol/ml) were directly copolymerized with acrylamide and bisacrylamide to form activated gels of the desired shape and porosity. Proteins or other ligands in aqueous buffers were then added to the activated gels resulting in their covalent immobilization. Ligands or proteins immobilized using the methods reported here remained stably bound even when gels were subjected to boiling in detergents or high-ionic-strength buffers. Immobilized ligands were readily released (greater than 97%) from gels by treatment with quantitative amounts of aqueous dithiothreitol (DTT) under mild conditions. Immobilized proteins were also released (up to 87%) from the gels by DTT treatment. Small ligands (e.g., aminohexyl glycosides), active enzymes, and glycoproteins were immobilized, and then recovered, using these reagents.     

A discontinuous and highly porous sodium dodecyl sulfate-polyacrylamide slab gel system of high resolution

A highly porous and efficient discontinuous sodium dodecyl sulfate-polyacrylamide slab gel electrophoresis system is described. The slab get consists of two porous layers of acrylamide of the following composition: 4% acrylamide, 0.04% bisacrylamide for the stacking gel, and 10% acrylamide, 0.1% bisacrylamide for the separating gel, both layers having different buffers. The separating gel mixture (final pH 9.0) and the buffers of the electrode chamber (pH 8.45) consist of Tris and glycine in such a ratio that no acid or base is necessary to adjust the pH. The resulting gel system has the following advantages: (a) it is able to resolve the components from large-volume samples (up to 200 microliter) after an overnight electrophoresis run while still maintaining the capacity to produce very sharp bands; (b) it has a high and broad resolution, allowing the separation on the same gel of proteins with apparent molecular masses between 10,000 and 450,000 Da; (c) it is very easy to prepare and shows excellent reproducibility in the electrophoretic patterns; (d) when used as a second dimension in tandem with isoelectric focusing, it improves the resolving power of two-dimensional gel electrophoresis; and finally, (e) its low crosslinker-to-acrylamide ratio allows the effective and rapid transfer of proteins to nitrocellulose membrane, thus improving the usefulness of protein blotting. In all cases, adrenal medullary chromaffin cell proteins were used as test samples.     

Models of protein modification in Tris-glycine and neutral pH Bis-Tris gels during electrophoresis: effect of gel pH

The pH of conventional Tris-glycine SDS-PAGE gels during a run is determined to be 9.5, in contrast to Bis-Tris-Mes gels where the pH is 7.2. Concentrations of free acrylamide are determined to be less than 10mM in commercial gels of both types, and it is found that of the major components in these gels, only glycine and protein amine or sulfhydryl functions are likely to react with residual acrylamide during the time frame of typical separations. The addition of acrylamide to sulfhydryl groups on proteins is modeled using glutathione and cysteine at acrylamide concentrations found in the commercial gels. Rate constants are determined for these reactions as well as for reaction with glycine at the pH that proteins will encounter in these gel types. The half-life for glutathione sulfhydryl at 10mM acrylamide and pH 7.2 is more than 4h at room temperature. Rates are significantly lower in Bis-Tris-Mes gels than in Tris-glycine gels, reducing the risk of adventitious protein modification. Commercial Bis-Tris-Mes gels provide a sample reduction buffer at pH 8.5 versus the conventional pH 6.8 of Tris-glycine gels. It is shown that significantly less protein degradation occurs during sample preparation at the higher pH used with Bis-Tris gels.     

The methyl-accepting chemotaxis proteins of E. coli: a repellent-stimulated, covalent modification, distinct from methylation

The methyl-accepting chemotaxis proteins (MCPs) of Escherichia coli are integral membrane proteins that have been shown to undergo reversible methylation in response to the addition of attractants. We have shown that a second, rapid modification of MCPI and MCPII occurs, which is repellent-stimulated. This modification, which is not methylation, was detected because it causes a decrease in mobility of the MCPs on 7.5% SDS-polyacrylamide gels with a high acrylamide to bisacrylamide ratio. We have designated this modification as the CheB-modification, as it is dependent on the CheB gene product. The CheB-modification causes a decrease in the isoelectric point of MCPII by one or two charge groups. The CheB-modification is not necessary for the methylation, nor does it preclude methylation of the MCPs. Both the CheB-modified form and the unmodified, unmethylated forms of the MCPs are stable to treatment with base, which results in the hydrolysis of the methylesters (demethylation) of the MCPs. The potential role of CheB-modification in chemotaxis is discussed.     

Bacteriophage lambda repressor allelic modulation of the Rex exclusion phenotype

The sensitivity of delta red-gam delta ren mutants of bacteriophage lambda to Rex exclusion by lambda rexA+ rexB+ lysogens is modulated by the prophage cI repressor allele. We show the following: (i) lambda spi156 delta nin5 forms plaques on a cI+-rexA+-rexB+ lysogen with 10(5)-fold higher efficiency than on cI[Ts]-rexA+-rexB+ derivatives. (ii) The cI[Ts]857 allele augmentation of Rex exclusion is recessive to cI+. (iii) The cI857-mediated increase in Rex exclusion activity involves the participation of a genetic element mapping outside of cI-rexA-rexB.     

Imidazole-SDS-Zn reverse staining of proteins in gels containing or not SDS and microsequence of individual unmodified electroblotted proteins.

A reverse staining procedure is described for the detection of proteins in acrylamide and agarose gels with and without SDS. Protein detection occurs a few minutes after electrophoresis. The sensitivity on acrylamide gels is higher than that of Coomassie blue staining either on acrylamide gels or on electrotransferred membranes. Sequencing of protein bands only detected by reverse staining on the gel and not by Coomassie blue is demonstrated.     

The fractionation of high-molecular-weight ribonucleic acid by polyacrylamide-gel electrophoresis

1. Gels were prepared with recrystallized acrylamide and bisacrylamide. Electrophoresis was in tris-sodium acetate-EDTA buffer for 0.5 to 3hr. Gels were scanned at 280 or 265mmu. Techniques are described for slicing and radioactive counting. 2. The mobility of RNA was inversely related to the sedimentation coefficient and varied with gel concentration. Electrophoresis in 2.2-2.6% gels gives a fractionation similar to density-gradient centrifugation. It shows the two ribosomal RNA components, the 45s precursor, transfer RNA and minor components. In 5% and 7.5% gels, 4s and 5s RNA separated and ribosomal RNA was excluded. 3. The resolution is greater and more detailed than by centrifugation, and many samples can be analysed simultaneously and rapidly.     

Purification of the bacteriophage lambda xis gene product required for lambda excisive recombination

Excision of the lambda prophage from the chromosome of its Escherichia coli host requires the products of the two viral genes int and xis. This paper reports a purification of the lambda xis gene product using a complementation assay in which functional Xis must be added to purified Int and an E. coli-derived host factor extract. Excisive recombination between a left (attL) and right (attR) prophage attachment site cloned on the same plasmid DNA substrate occurred efficiently under these conditions. Purified Int and Xis together could not carry out excision in vitro unless an extract derived from the E. coli host was added; purified integration host factor satisfied this requirement. Xis appears to have a molecular weight of 8800 as determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. It possesses no detectable endonuclease or topoisomerase activities, does not appear to bind DNA to filters, and does not increase the ability of Int to bind DNA. The addition of Xis not only stimulated excisive recombination in vitro but also inhibited integrative recombination. Xis protected Int protein from heat inactivation, suggesting a possible interaction between the two proteins. In light of these observations, possible roles for Xis in recombination are discussed.     

尿素改善SDS-PAGE分离小分子肽的效果

目的：探讨尿素对Tricine—SDS—PAGE系统分离小分子蛋白的影响。方法：利用常规SDS-PAGE和Tricine-SDS-PAGE分离小分子肽,比较不同组成的分离胶的分离效果。结果：调整聚丙烯酰胺凝胶的分子组成,使丙烯酰胺和甲叉双丙烯酰胺的交联度为5．05％,能够改善小分子肽的分离效果。加入36％的尿素比加入甘油可以更有效分离1kD的小肽。但尿素胶聚合太快影响分离效果。结论：尿素改善SDS—PAGE分离小分子肽的效果,制作尿素胶时,宜采用低浓度的AP和TEMED使凝胶慢速聚合。     

Refined definition of the 56K and other autoantigens in the 50–60 kDa region

Alteration of the acrylamide: bisacrylamide ratio in the SDS-polyacrylamide gel used for Western blotting strongly improved the unambiguous detection of antibodies against 50–60 kDa autoantigens present in autoimmune patient sera. The relative migration of Ro 52, the 56K autoantigen and calreticulin increased with reduced acrylamide: bisacrylamide ratios in contrast to that of Ro60, La and Jo-1. These analyses indicated that these six autoantigens correspond to six distinct polypeptides.Further analyses using recombinant calreticulin showed that (i) the 56K autoantigen is neither identical nor related to calreticulin and (ii) calreticulin is not a Ro autoantigen.A series of experiments designed to better characterize the 56K autoantigen showed that (i) the antigen is not detectable in fixed cells, presumably due to masking of the epitopes; (ii) about equal amounts of the antigen were recovered in nuclear and cytoplasmic cell, fractions after enucleation of the cells; (iii) the 56K autoantigen is not stably associated with either RNA or other proteins.Abbreviations a- anti- - CaR calreticulin - NHS normal human serum - NRS normal rabbit serum - r recombinant - RA rheumatoid arthritis - SLE systemic lupus erythematosus - SS Sjögren's syndrome     

Comparison of the structures of cro and lambda repressor proteins from bacteriophage lambda

The three-dimensional structures of cro repressor protein and of the amino-terminal domain of lambda repressor protein, both from bacteriophage lambda, are compared. The second and third alpha-helices, alpha 2 and alpha 3, are shown to have essentially identical conformations in the two proteins, confirming the significance of the amino acid sequence homology previously noted between these and other DNA binding proteins in the region corresponding to these helices. The correspondence between the two-helical units in cro and lambda repressor protein is better than the striking agreement noted previously between two-helical units in cro and catabolite gene-activator protein. Parts of the first alpha-helices of repressor and cro show a structural correspondence that suggests a revised sequence homology between the two proteins in their extreme amino-terminal regions. In particular, there is a short loop between the alpha 1 and alpha 2 helices of lambda repressor that is missing from cro. This structural difference may account for the observed differences found with different cros and repressors in the pattern of phosphates whose ethylation prevents the binding of these proteins to their specific recognition sites. Although the two proteins have strikingly similar alpha 2-alpha 3 helical units that are presumed to bind to DNA in an essentially similar manner, stereochemical restrictions prevent the alpha 2-alpha 3 units of the respective proteins aligning on the DNA in exactly the same way.     

The transition of polymers into a network of polymers alters per se the water activity

We have found that polyacrylamide gels cross-linked with bisacrylamide induce a larger macromolecular osmotic pressure than the non cross-linked gels. This means also that in the cross-linked gels hydration water is held more tightly to the polymer, i.e., more work is needed to remove water, than in the non cross-linked gel. Since the chemical nature of the two gels is extremely similar, we propose that the formation of the network alters per se the water activity.     

Agarose-acrylamide gradient gel electrophoresis of proteins

A new agarose-acrylamide gradient slab gel electrophoresis system is described. The preparation of this new gel has been facilitated by the use of agarose with a relatively low gelation temperature. Fractionation of marker proteins and crosslinked proteins from a subcellular cytoskeletal preparation on agarose-acrylamide gradient gels is compared to that found using other acrylamide gel electrophoresis systems.     

Fractionation and characterization of DNA at sites of replication from rat liver nuclei

Regenerating rat liver nuclei when sonicated and centrifuged in a Cs2SO4 gradient were fractionated into three distinct bands. These bands were designated as light band (LB), middle band (MB), and heavy band (HB) according to their density. LB and MB were shown to consist of large granular particles with varying electron densities, but LB also contained remnants of nuclear membrane. When analysed by gel electrophoresis, LB and MB displayed more than 35 bands of proteins. The third fraction, HB, consisted largely of small chromatin fibers and its proteins were predominantly the four histones of the nucleosomal core particle. Following short pulses with [3H]thymidine in vivo, the specific activity of DNA in LB and MB was significantly higher than that of bulk DNA contained in HB. DNA in all three fractions became equally labelled as the duration of the labelling interval increased beyond 30 min. Newly synthesized DNA was characterized by electrophoresis on analytical 1.7% acrylamide -0.5% agarose composite gels. After a 1-min labelling interval in vivo, 17% of the rapidly labelled DNA from LB and MB was stationary at the gel origin like replication forks from E. coli, but only 3% of HB DNA had zero mobility. Electron microscopy confirmed the presence of DNA replication forks in LB, MB, and HB. With increasing time of synthesis the proportion of labelled DNA exhibiting zero mobility decreased in all three fractions. Denaturation of DNA or digestion of single-stranded DNA with S1 nuclease released newly synthesized DNA from the gel origin. Ribonuclease was without effect. DNA recovered from LB and MB also had a higher molecular weight than the HB DNA. Together these results indicate (1) that LB and MB are enriched in newly replicated DNA; (2) that an increased proportion of newly replicated DNA in LB and MB is associated with DNA replication forks; and (3) that the replicating DNA recovered in LB and MB may be associated with other nuclear constituents in situ because this DNA appears to be protected from the more frequent chain breaks introduced into the bulk of chromatin (HB) by sonication.     

Lac repressor — Lac operator complexes

Complexes between the Lac repressor and a small DNA operator fragment (29 base pairs) were investigated using polyacrylamide gel electrophoresis and solution X-ray scattering. Titration of the DNA fragment with the repressor, followed by gel electrophoresis showed that only two types of complexes are formed with repressor/operator ratios of 0.5 and 2. Radii of gyration and forward scattered intensities were obtained from Guinier plots for repressor/operator ratios ranging from 0.3 to 2. They demonstrated that the first complex contains one repressor and two operators, whereas the second one contains four repressors and two operators. Mixing operator and repressor in equimolar concentrations leads to a mixture of both complexes. A possible model for the four repressor/two operator complex is proposed.     

Synaptic intermediates in bacteriophage lambda site-specific recombination: integrase can align pairs of attachment sites.

Bacteriophage lambda uses site-specific recombination to move its DNA into and out of the Escherichia coli genome. The recombination event is mediated by the recombinase integrase (Int) together with several accessory proteins through short specific DNA sequences known as attachment sites. A gel mobility shift assay has been used to show that, in the absence of accessory proteins, Int can align and hold together two DNA molecules, each with an attachment site, to form stable non-covalent 'bimolecular complexes'. Each attachment site must have both core and arm binding sites for Int to participate in a bimolecular complex. These stable structures can be formed between pairs of attL and attP attachment sites, but cannot include attB or attR sites; they are inhibited by integration host factor (IHF) protein. The bimolecular complexes are shown to represent a synaptic intermediate in the reaction in which Int protein promotes the IHF-independent recombination of two attL sites. These complexes should enable a detailed analysis of synapsis for this pathway.