Characterization of the basic replicons of the chimeric R/Ent plasmid pCG86 and the related Ent plasmid P307

Restriction-enzyme fragments that can replicate autonomously after circularization were isolated from the chimeric R/Ent plasmid pCG86 and the Ent plasmid P307. Two such regions containing a basic replicon were located in each plasmid. One of the basic replicons of P307, RepFIB, is almost identical with one of the basic replicons of pCG86. The other basic replicon in P307, RepFIC, is partly homologous with the second basic replicon in pCG86, RepFIIA/RepFIC. The latter is a hybrid basic replicon and is in addition partly homologous with RepFIIA, a basic replicon present in IncFII R plasmids. By restriction-enzyme mapping and nucleotide-sequence analysis we have determined a site in the hybrid replicon where it ceases to be homologous with the RepFIIA basic replicon contained in the IncFII miniplasmid pSM1. The 2410-bp region of homology with pSM1 corresponds with a segment containing the origin of replication and all the genes responsible for replication control of pSM1.     

Properties and incompatibility behavior of miniplasmids derived from the bireplicon plasmid pCG86

Summary Many plasmids belonging to the F incompatibility groups contain more than one basic replicon. The chimeric plasmid pCG86 is an example of such a multireplicon plasmid. The two basic replicons of pCG86, RepFIIA/FIC and RepFIB have been cloned and re-ligated, the copy numbers of the clones have been determined, and the incompatibility behavior of plasmids containing the ligated replicons and the individual replicons has been studied. The bireplicon plasmids are not expected to be incompatible as recipients with monoreplicon RepFIB or RepFIIA/RepFIC plasmids, since when one replicon is challenged by an incoming replicon, the other should be able to handle the plasmid's replication. In our studies, we found that challenge with either monoreplicon plasmid resulted in incompatibility. This incompatibility was increased in bireplicon plasmids in which RepFIB was duplicated. We conclude that in the bireplicon plasmids, challenging the replication control of one replicon by an incompatible plasmid can interfere with the replication originating from the second replicon.     

Distribution of basic replicons having homology with RepFIA, RepFIB, and RepFIC among IncF group plasmids

Plasmids encoding F-like pili have been divided into groups on the basis of their incompatibility behavior. Three basic replicons have been recognized previously in the IncFI plasmid group and we have now examined their distribution in representative plasmids from 22 of the currently recognized incompatibility groups. The occurrence of these basic replicons was found to be rare outside of the IncF group, and significant hybridization was shown only for RepFIA to IncH1 and I group plasmids. Homology to the RepFIC basic replicon was found in all but one of the IncF group plasmids examined but RepFIA and RepFIB have a more restricted distribution. It appears likely that some plasmids carry vestiges of replicons which still express incompatibility but are incapable of replication. We suggest that evolutionary divergence among the plasmids of the IncF group has resulted from various genetic rearrangements among these basic replicons.     

Distribution of plasmid maintenance regions among IncFIV plasmids

The distribution of the IncFI basic replicons among IncFIV plasmids was assessed by DNA hybridization. In addition these and 20 other plasmids from 16 incompatibility groups were screened for the presence of IncIV, an incompatibility determinant recently found on the IncFIV plasmid R124. The IncIV determinant was found commonly but not universally among the IncFIV plasmids. It was also detected on the IncFI reference plasmid R386 and plasmids from IncB, IncI alpha and IncI gamma. The frequency and distribution of IncFI replicons among the IncFIV plasmids is similar to that observed in other F groups. The similarity of the IncFIV plasmids to plasmids of the other IncF groups and the failure to find replicons unique to IncFIV plasmids indicates that their division into a separate incompatibility group is not justified.     

Nucleotide sequence analysis of RepFIC, a basic replicon present in IncFI plasmids P307 and F, and its relation to the RepA replicon of IncFII plasmids.

RepFIC is a basic replicon of IncFI plasmid P307 which is located within a 3.09-kilobase SmaI fragment. The nucleotide sequence of this region has been determined and shown to be homologous with the RepFIIA replicon of IncFII plasmids. The two replicons share three homologous regions, HRI, HRII, and HRIII, which are flanked by two nonhomologous regions, NHRI and NHRII. A comparison of coding regions reveals that the two replicons have several features in common. RepFIC, like RepFIIA, codes for a repA2 protein with its amino-terminal codons in HRI and its carboxy-terminal codons in NHRI. Although the codons for the repA1 proteins are located in NHRII, the DNA region containing a putative promoter, ribosomal binding site, and initiation codons is located in HRII. This region also codes for an inc RNA. There are nine base-pair differences between the inc RNA of RepFIIA and that of RepFIC, and as a result, RepFIC and RepFIIA replicons are compatible. An EcoRI fragment from the F plasmid which shows homology with RepFIC of P307 has also been sequenced. This fragment contains only a portion of RepFIC, including the genes for the putative repA2 protein and inc RNA. The region coding for a putative repA1 protein is interrupted by the transposon Tn1000 and shows no homology with the repA1 region of RepFIIA and RepFIC of P307. Our comparative and structural analyses suggest that RepFIC and RepFIIA, although different, have a similar replication mechanism and thus can be assigned to the same replicon family, which we designate the RepFIIA family.     

RepFIC, a basic replicon of IncFI plasmids that has homology with a basic replicon of IncFII plasmids

It was found that a DNA segment containing genes for autonomous replication and its control (basic replicon) present in the IncFI plasmid P307 has homology with RepA, a basic replicon present in IncFII plasmids. The basic replicon in P307 is referred to as RepFIC and the homologous basic replicon in IncFII plasmids is referred to as RepFIIA. In 11 other IncFI plasmids studied a region that has homology with RepFIC and RepFIIA was demonstrated. Thus, of the several basic replicons present in IncFI plasmids, RepFIC is evolutionarily related to a basic replicon of IncFII plasmids.     

Nucleotide sequence and replication characteristics of RepFIB, a basic replicon of IncF plasmids.

A second autonomous replicon of P307, RepFIB, has been isolated that has significant homology with other replicons in IncFI group plasmids. Eleven homologous repeats of 21 base pairs are present on the sequence and flank an open reading frame capable of coding for a protein of about Mr = 40,000. This protein was identified by maxicell analysis of cloned RepFIB. A series of deletion mutations of RepFIB were inserted into a DNA polymerase I-dependent vector and examined for their replication proficiency in a polA1 strain. These experiments defined a minimal replication region of 1.6 kilobases which includes the three repeats immediately upstream and downstream of the open reading frame. Deletion of a second set of repeats further downstream doubled the copy number of a chimeric plasmid replicating under RepFIB control. It was concluded that these repeats control the copy number of the replicon. Incompatibility tests showed that all three sets of repeats could express incompatibility with a resident RepFIB plasmid.     

Analysis of a region in plasmid R386 containing two functional replicons

A miniplasmid has been obtained from R386 by ligating EcoRI fragments with a fragment carrying a kanamycin-resistance gene. It contains a 6.8-kb Eco fragment of R386 which hybridizes strongly with several IncFI plasmid DNAs but not with the primary or secondary replicons of the F plasmid. This mini-R386 is incompatible with certain IncFI plasmids, and it appears to be one example of a previously unidentified replicon widely distributed in the IncFI group. A region of R386 not closely linked to the 6.8-kb fragment is involved in copy number control of the mini-R386, and a sequence in the same region interacts with mini-F partition functions to cause incompatibility. The 6.8-kb fragment also restricts growth of T7 bacteriophage, and an adjacent fragment restricts phage T4 growth. A further R386 sequence, sharing homology with the F secondary replicon, is capable of autonomous replication. Hence R386, like F, contains at least two functional replicons.     

Identification of the origin of replications and partial characterization of plasmid pRK100

In search for the evolutionary origin of the conjugative F-like plasmid pRK100, the plasmid's functional replication regions were identified. Additionally targeted genetic analysis was used to investigate origins of other regions of the plasmid. Construction of minireplicons via ligation of Tn1725 with plasmid fragments and targeted cloning of putative replication regions, followed by sequence analysis indicated two functional replication regions, a F plasmid related RepFIB and a R1 plasmid related RepFIIA replication region. Partial nucleotide sequencing of regions of the plasmid revealed genes that encode a putative enterochelin iron uptake system previously associated with an Escherichia coli pathogenicity island, PAI III536, and the pColV-like aerobactin genes. In addition, a homologue of the R100 plasmid related rmoA gene was found that exhibits strong similarity to hha/ymoA encoding the Hha/YmoA class of modulators of gene expression. PCR and hybridization experiments further demonstrated that pRK100 harbors multiple IS2 and IS3 insertion sequences that may have facilitated in the acquisition of elements from other DNA molecules. These data together with the previous identification of a F-like tra region and a pColIa-like colicin Ia, indicate that pRK100 has a highly mosaic structure with elements derived from many different known large natural plasmids.     

A restriction map of IncFIV plasmid R124

A physical and genetic map of the 125.7-kb IncFIV plasmid R124 was constructed using the restriction enzymes Sal1 and EcoR1. Two discrete regions involved in plasmid replication were identified on the plasmid genome. One region was located on a 4.66-kb segment of an EcoR1 fragment at map coordinates 73.87 to 78.53 kb. Another was located within an 8.05-kb segment of an EcoR1 fragment at map coordinates 113.40 to 121.45. This region was very unstable but, when ligated to the 3.21-kb EcoR1 fragment E13 located at map coordinates 18.83 to 22.06 kb, replication was stable. Thus, at least three regions of R124 widely separated around the genome are associated with plasmid replication and stable maintenance. Each of these three regions expressed incompatibility with R124. The Tc resistance gene of R124 was located on the contiguous EcoR1 fragments E8 and E12 located at map coordinates 100.49 to 113.40.     

A replication region of the IncHI plasmid, R27, is highly homologous with the RepFIA replicon of F

A region of the IncHI plasmid R27 has been found to share very close nucleotide sequence homology with the RepFIA replicon of F. This region has been located on a 1.6 kb segment of R27 plasmid DNA, and corresponds to ori-2 and the E gene of F. The incC repeat sequence region shows reduced homology, with the F repeats being an imperfect subset of a larger repeated sequence found in R27. The E gene homologue of R27 is able to initiate replication from the F ori-2 sequence and to repress the E gene promoter of F. The results are consistent with the observed incompatibility behaviour of R27, and have a bearing on the specificity of interaction of E protein with its DNA-binding sites.     

Molecular homology and incompatibility in the IncFI plasmid Group

The usual grounds for the inclusion of a plasmid in a particular incompatibility group are its mutual incompatibility with a type plasmid of that group, and, in some cases, the demonstration of shared regions of specific homology, presumed to be related to DNA replication. We have found that some plasmids classified as IncFI on genetical grounds share no homology with the previously described incompatibility regions of F on the basis of hybridization of specific radioactive probes to restriction enzyme digests of DNA from these plasmids. Others show homology with some or all of the regions of the F plasmid that can express incompatibility. The incompatibility behaviour of these plasmids has been examined to determine the relationship between the possession of regions of homology and the expression of incompatibility. Three plasmids, ColV3-K30, pHH507 and Entp307, show homology only with the secondary replicon of F and appear to use sequences homologous with the secondary F replicon in their replication. The results are consistent with the propositions that some contemporary IncFI plasmids arose by the integration of several replicons, and, in general, the replicon not being used for replicon expresses its incompatibility, as does the replicon being used for replication. We conclude that incompatibility of two plasmids with F does not necessarily demonstrate relatedness of the plasmids to each other, and that inclusion within the IncFI group can result from the possession of any of several combinations of inc sequences.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.     

Cloning and characterization of a replicon region of the IncHII plasmid pHH1457

A replicative region of the large conjugative plasmid pHH1457 (incompatibility group HII (IncHII)) was cloned. A 1.4-kbp region, in a stable pSBII14 clone, containing a PolI-independent replicon and determinants for the HII incompatibility phenotype, was selected and characterized. High incompatibility with IncHII plasmids was corroborated. Independent replication of the insert was demonstrated by ligation to an antibiotic resistance cassette. pSBII14 was used as a probe to identify IncHII plasmids from other members of the H complex: IncHI (IncHI1, IncHI2 and IncHI3 subgroups). Hybridization experiments revealed a high homology with the replication region of IncHII plasmids, but not with IncHI1 or IncHI3 plasmid prototypes. Homology with IncHI2 plasmids was observed, suggesting the presence of IncHII-like replicons among this subgroup of plasmids. This is the first report of the characterization of an IncHII plasmid maintenance region.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Km^s. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

Comparison of 10 IncP plasmids: homology in the regions involved in plasmid replication.

We have examined the DNA homology in the replication regions of 10 IncP plasmids independently isolated from several different countries. Two regions of RK2, the best-studied plasmid of this group, are required for vegetative DNA replication: the origin of replication (oriV) and the trfA region, which codes for a gene product necessary for replication. Six of nine IncP plasmids studied were identical to RK2 in the oriV and trfA regions as shown by Southern hybridization. Three P plasmids, R751, R772, and R906, showed weaker homology with the RK2 trfA, region and hybridized to different-sized HaeII fragments than the other six plasmids. R751, R772, and R906 hybridized to the region of the RK2 replication origin which expresses P incompatibility but differed markedly from RK2 and the other six plasmids in the GC-rich region of the origin required for replication. These data indicate that the P-group plasmids can be divided into two subgroups: IncP alpha, which includes the RK2-like plasmids, and IncP beta which includes the R751-like plasmids.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Kms. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

Cloning and characterization of a region responsible for the maintenance of megaplasmid pTAV3 of Paracoccus versutus UW1

Using cointegrate formation, we constructed a basic replicon of the megaplasmid/mini-chromosome pTAV3 of Paracoccus versutus UW1. It is composed of two adjacent modules, responsible for plasmid replication (rep) and partitioning (par). Functional analysis of the par region identified a determinant of incompatibility (inc2), whose presence is crucial for proper partitioning (the partitioning site). Database searches revealed that the only known replicon with significant homology to that of pTAV3 is encoded by the chromosome cII of Rhodobacter sphaeroides 2.4.1. Incompatibility studies showed that closely related basic replicons are also encoded by megaplasmids (above 400 kb) harbored by four strains of P. pantotrophus. Basic replicons of the pTAV3-type are able to maintain large bacterial genomes, therefore they appear to be good candidates for the construction of vectors specific for Alphaproteobacteria.     

Isolation and location on the R27 map of two replicons and an incompatibility determinant specific for IncHI1 plasmids.

Two replicons were isolated independently from different IncHI1 plasmids. One was isolated from R27, and a second was isolated from pIP522. We demonstrate, by DNA-DNA hybridization experiments, that these maintenance regions are different and that they are specific to, and carried by, all IncHI1 plasmids tested. In view of this specificity we decided to designate the replicon isolated from R27 as RepHI1A and the replicon isolated from pIP522 as RepHI1B. These two autoreplicative regions are not related to a third replicon present in all IncHI1 plasmids that bears homology with RepFIA and that expresses the characteristic incompatibility of IncHI1 subgroup plasmids toward F factor (D. Saul, D. Lane, and P. L. Bergquist, Mol. Microbiol. 2:219-225, 1988; D. E. Taylor, R. W. Hedges, and P. L. Bergquist, J. Gen. Microbiol. 131:1523-1530, 1985). These results demonstrate that all IncHI1 plasmids tested contain at least three replicons. An incompatibility (Inc) region that hybridizes specifically to all the IncHI1 plasmids was previously isolated (M. Couturier, F. Bex, P. L. Bergquist, and W. K. Maas, Microbiol. Rev. 52:375-395, 1988). Although this Inc locus is not located in an autoreplicative region of IncHI1 plasmids, we observed that this locus stabilizes a low-copy-number replicon. This Inc locus is probably a component of an active partition locus involved in the maintenance of IncHI1 plasmids. The nucleotide sequence of the Inc region contains direct repeats of 31 bp. In addition, this incompatibility determinant hybridizes specifically with IncHI1 plasmids but expresses incompatibility toward plasmids of both IncHI subgroups (IncHI1 and IncHI2). In this communication, we present the mapping of these maintenance elements on the R27 genome.     

Incompatibility and replication of plasmids]

The identified basic replicons rep1 and rep2 of plasmid pAP42 belong to different groups of incompatibility (inc FIX and inc FVIII). The replicons are partly incompatibile with other inc F-groups too. The results indicate connection between plasmid incompatibility and their replication.