Direct biochemical measurements of signal relay during Dictyostelium development

Upon starvation, individual Dictyostelium discoideum cells enter a developmental program that leads to collective migration and the formation of a multicellular organism. The process is mediated by extracellular cAMP binding to the G protein-coupled cAMP receptor 1, which initiates a signaling cascade leading to the activation of adenylyl cyclase A (ACA), the synthesis and secretion of additional cAMP, and an autocrine and paracrine activation loop. The release of cAMP allows neighboring cells to polarize and migrate directionally and form characteristic chains of cells called streams. We now report that cAMP relay can be measured biochemically by assessing ACA, ERK2, and TORC2 activities at successive time points in development after stimulating cells with subsaturating concentrations of cAMP. We also find that the activation profiles of ACA, ERK2, and TORC2 change in the course of development, with later developed cells showing a loss of sensitivity to the relayed signal. We examined mutants in PKA activity that have been associated with precocious development and find that this loss in responsiveness occurs earlier in these mutants. Remarkably, we show that this loss in sensitivity correlates with a switch in migration patterns as cells transition from streams to aggregates. We propose that as cells proceed through development, the cAMP-induced desensitization and down-regulation of cAMP receptor 1 impacts the sensitivities of chemotactic signaling cascades leading to changes in migration patterns.     

Direct force measurements between siRNA and chitosan molecules using force spectroscopy

Information on the interaction strength between small interfering RNA (siRNA) and chitosan can contribute to the understanding of the formation and stability of chitosan/siRNA nanoparticles used as siRNA delivery systems for gene silencing. In this study, we utilize atomic force microscopy to obtain force spectroscopy results of the interaction strengths between siRNA and chitosan measured in physiological phosphate buffered saline buffer at different pH. The force measurements revealed that the adhesive interactions decreased in force strength and force frequency as the pH was increased from 4.1 to 6.1, 7.4, and 9.5, exhibiting distinct multimodal distributions of the interaction forces between siRNA and chitosan molecules at acidic pH and only negligible adhesive forces were observed at neutral or high pH. The strong pH dependence of siRNA-chitosan interactions can provide a convincing rationale for siRNA/chitosan complex formation and nanoparticle stability under low acidic conditions. These findings demonstrate that the use of force spectroscopy for the adhesive force measurements allows an evaluation of the complexing ability between siRNA and chitosan that can be utilized to predict nanoparticle stability.     

Direct force measurements of the streptavidin-biotin interaction

The interaction between streptavidin and its ligand, biotin, were studied by direct force measurements. The complimentary approaches of surface force apparatus (SFA) and atomic force microscopy (AFM) were used to elucidate both long-range and short-range adhesive interactions of the streptavidin biotin interaction. The high spatial resolution of the SFA provided a detailed profile of the intersurface forces of apposing surfaces functionalized with streptavidin and biotin. Measurements obtained by the SFA corresponded to long and intermediate-range forces that are important in determining ligand receptor association. AFM was used to measure the unbinding force of individual streptavidin biotin complexes. These measurements revealed the short-range interactions (i.e. hydrophobic and hydrogen bonding forces) that stabilize the intermolecular bond.     

Direct measurements of the mechanical stability of zinc-thiolate bonds in rubredoxin by single-molecule atomic force microscopy

Zinc (Zn) is one of the most abundant metals and is essential for life. Through ligand interactions, often with thiolate from cysteine residues in proteins, Zn can play important structural roles in organizing protein structure and augmenting protein folding and stability. However, it is difficult to separate the contributions of Zn-ligand interactions from those originating from intrinsic protein folding in experimental studies of Zn-containing metalloproteins, which makes the study of Zn-ligand interactions in proteins challenging. Here, we used single-molecule force spectroscopy to directly measure the mechanical rupture force of the Zn-thiolate bond in Zn-rubredoxin. Our results show that considerable force is needed to rupture Zn-thiolate bonds (∼170 pN, which is significantly higher than the force necessary to rupture the coordination bond between Zn and histidines). To our knowledge, our study not only provides new information about Zn-thiolate bonds in rubredoxin, it also opens a new avenue for studying metal-ligand bonds in proteins using single-molecule force spectroscopy.     

Analysis of proportion regulation in slugs of Dictyostelium discoideum using a monoclonal antibody and a FACS-IV

A quantitative assay for estimating the proportion of prespore cells in D. discoideum slugs was established by labelling disaggregated slug cells with a prespore specific monoclonal antibody and analysing the cell population with a FACS-IV. The method is validated using a wild-type strain and its stalky mutant. "Wild-type" strains have different proportions of prespore cells and it is demonstrated that slugs of some strains have an increased percentage of prespore cells when migrated in the dark compared to the light and in the presence of EGTA. The technique is rapid and will make possible genetic analysis of proportion regulation in D. discoideum.     

Aerial migration of the Dictyostelium slug

The Dictyostelium slug lays down curved marks in its slime sheath trail as it migrates across an agar substrate. These 'footprints' are caused by elevation of the slug anterior as it initiates a period of aerial migration and can be used as a measure of the slug's propensity for this behavior. A variety of factors have been found to affect the number of footprints created per distance migrated. Smaller slugs produce a higher incidence of footprints than larger slugs. Migration in the light and lower temperatures during migration increase footprint incidence. Activated charcoal reduces, while exogenous addition of ammonia increases, the incidence of footprints. Simulation of the three-dimensional (3D) environment of the soil suggests that aerial migration plays a role in the slug's movement through the cavities of its natural environment. A model proposes that aerial migration is initiated by a small group of continually changing prestalk cells that acts as a pacemaker and is moved around the circumference of the slug tip by the rotation of the prestalk cells. As this pacemaker reaches the upper surface of the slug it can initiate aerial migration.     

Mechanisms of force generation and force transmission during interstitial leukocyte migration

For innate and adaptive immune responses it is essential that inflammatory cells use quick and flexible locomotion strategies. Accordingly, most leukocytes can efficiently infiltrate and traverse almost every physiological or artificial environment. Here, we review how leukocytes might achieve this task mechanistically, and summarize recent findings on the principles of cytoskeletal force generation and transduction at the leading edge of leukocytes. We propose a model in which the cells switch between adhesion‐receptor‐mediated force transmission and locomotion modes that are based on cellular deformations, but independent of adhesion receptors. This plasticity in migration strategies allows leukocytes to adapt to the geometry and molecular composition of their environment.     

Direct force measurements between cellulose surfaces and colloidal silica particles

The interaction of cellulose layers with colloidal silica particles was investigated by direct force measurements with the atomic force microscope (AFM). Upon approach, repulsive forces were found between the negatively charged silica particles and the cellulose surface. The forces were interpreted quantitatively in terms of electrostatic interactions due to overlap of diffuse layers originating from negatively charged carboxylic groups on the cellulose surface. The diffuse layer charge density of cellulose was estimated to be 0.80 mC/m2 at pH 9.5 and 0.21 mC/m2 at pH 4. The forces upon retraction are characterized by molecular adhesion events, whereby individual cellulose chains desorb from the probe surface. The retraction profiles are dominated by well-defined force plateaus, which correspond to single-chain desorption forces of 35-42 pN. We surmise that adsorption of cellulose to probe surfaces is dominated by nonelectrostatic forces, probably originating from hydrogen bonding. Electrostatic contributions to desorption force could be detected only at high pH, where the silica surface is highly charged.     

Exosome-mediated transduction of mechanical force regulates prostate cancer migration via microRNA

Physical cues in the extracellular microenvironment regulate cancer cell metastasis. Functional microRNA (miRNA) carried by cancer derived exosomes play a critical role in extracellular communication between cells and the extracellular microenvironment. However, little is known about the role of exosomes loaded miRNAs in the mechanical force transmission between cancer cells and extracellular microenvironment. Herein, our results suggest that stiff extracellular matrix (ECM) induced exosomes promote cancer cell migration. The ECM mechanical force regulated the exosome miRNA cargo of prostate cancer cells. Exosome miRNAs regulated by the ECM mechanical force modulated cancer cell metastasis by regulating cell motility, ECM remodeling and the interaction between cancer cells and nerves. Focal adhesion kinase mediated-ECM mechanical force regulated the intracellular miRNA expression, and F-actin mediate-ECM mechanical force regulated miRNA packaging into exosomes. The above results demonstrated that the exosome miRNA cargo promoted cancer metastasis by transmitting the ECM mechanical force. The ECM mechanical force may play multiple roles in maintaining the microenvironment of cancer metastasis through the exosome miRNA cargo.     

Direct discrimination between models of protein activation by single-molecule force measurements

The limitations imposed on the analyses of complex chemical and biological systems by ensemble averaging can be overcome by single-molecule experiments. Here, we used a single-molecule technique to discriminate between two generally accepted mechanisms of a key biological process--the activation of proteins by molecular effectors. The two mechanisms, namely induced-fit and population-shift, are normally difficult to discriminate by ensemble approaches. As a model, we focused on the interaction between the nuclear transport effector, RanBP1, and two related complexes consisting of the nuclear import receptor, importin beta, and the GDP- or GppNHp-bound forms of the small GTPase, Ran. We found that recognition by the effector proceeds through either an induced-fit or a population-shift mechanism, depending on the substrate, and that the two mechanisms can be differentiated by the data.     

Glycogen degradation during migration of presumptive cell types in Dictyostelium discoideum.

During the time course of differentiation in Dictyostelium discoideum, glycogen was found to accumulate from the amoebae stage to the culmination stage of development. Upon sorocarp formation (23 h), glycogen was rapidly degraded. Ultramicrotechniques, utilizing amplification of glycogen by enzymatic cycling, were used to follow glycogen metabolism in pre-stalk and prespore cells during the differentiation cycle. Both cell types accumulated glycogen at nearly the same rate. By the pseudoplasmodium stage of development glycogen had accumulated to 50% of its maximum value, and no differences were found between pre-stalk and pre-spore cells. Glycogen was degraded as pre-stalk cells migrated into the position for stalk construction. At the culmination stage of development stalk cells near the base were devoid of glycogen while pre-stalk cells near the apex of the stalk showed no loss of glycogen. The complete loss of glycogen from stalk cells occurred over a distance occupied by approximately 100 cells, and over a time period of approx. 1 h. Pre-spore cells at the culmination stage showed no loss of glycogen even though separated from stalk cells by only a thin cellulose sheath. The degradation of prespore cell glycogen did not commence until stalk construction was completed and the pre-spore mass had reached the apex of the stalk. Pre-spore cells at the culmination stage contained high levels of glycogen while only 2 h later, total degradation had occurred.     

Expression of prestalk and prespore proteins in minute, two-dimensional Dictyostelium slugs.

We show that exceedingly small two-dimensional slugs of Dictyostelium differentiate normally and have an anterior prestalk zone and a posterior prespore zone. Using GFP as a marker attached to the appropriate promoter, prestalk expression is concentrated in the anterior, while prespore expression is produced in the posterior, closely resembling what is found in normal, large slugs.     

Control of phototactic migration in Dictyostelium discoideum

Phototactic migration of pseudoplasmodia of the cellular slime mold, Dictyostelium discoideum, is directed by a response at the anterior tip. Horizontal light appears to be focused by refraction at the surface of the pseudoplasmodium such that it acts preferentially on the distal cells. We have been able to show that light stimulates the rate of pseudoplasmodial movement up to 80%. This increase is dependent on the intensity of the incident light. Thus it appears that light can control the direction of migration by increasing the rate of movement on the distal side. The anterior cells are then turned toward the light by cohesion to the more slowly moving proximal side. Migration rate in the dark may be limited by the rate of synthesis or deposition of the surface sheath surrounding the pseudoplasmodium. It is suggested that light increases the rate of migration by stimulating the formation of the surface sheath. Localized stimulation would then result in a turning response.     

Direct measurements of cell number using computer-aided video microscopy

Quantitative studies in cell culture require accurate measurements of cell density and kinetics. We have developed a direct, rapid, and noninvasive method for measuring cell number in monolayer culture. Using computer-aided video microscopy, cell number was measured without detaching or chemically destroying the cells, thereby allowing sequential measurements in the same cell population. Cell number measured by computer-aided microscopy closely correlated with hemocytometer counts and determinations of total cell protein. For high-density monolayers of mesenchymal cells, however, staining was required for accurate counts. Unlike other techniques for measuring cell density, computer-aided microscopy was especially accurate in medium- to low-density cultures (less than 6000 cells/cm2). In addition, we applied this technique to the construction of separate proliferation curves for glomerular mesangial and vascular endothelial cells in coculture. These measurements by cell type in coculture are impossible using conventional methods for determining cell number.     

Direct force measurement of single DNA–peptide interactions using atomic force microscopy

The selective interactions between DNA and miniature (39 residues) engineered peptide were directly measured at the single‐molecule level by using atomic force microscopy. This peptide (p007) contains an α‐helical recognition site similar to leucine zipper GCN4 and specifically recognizes the ATGAC sequence in the DNA with nanomolar affinity. The average rupture force was 42.1 pN, which is similar to the unbinding forces of the digoxigenin–antidigoxigenin complex, one of the strongest interactions in biological systems. The single linear fit of the rupture forces versus the logarithm of pulling rates showed a single energy barrier with a transition state located at 0.74 nm from the bound state. The smaller k_off compared with that of other similar systems was presumably due to the increased stability of the helical structure by putative folding residues in p007. This strong sequence‐specific DNA–peptide interaction has a potential to be utilized to prepare well‐defined mechanically stable DNA–protein hybrid nanostructures. Copyright © 2013 John Wiley & Sons, Ltd.     

Biomolecular force measurements and the atomic force microscope

The atomic force microscope (AFM) is a surface-sensitive instrument capable of imaging biological samples at nanometer resolution in all environments including liquids. The sensitivity of the AFM cantilever, to forces in the pico Newton range, has been exploited to measure breakaway forces between biomolecules and to measure folding-unfolding forces within single proteins. By attaching specific antibodies to cantilevers the simultaneous imaging of target antigens and identification of antigen-antibody interactions have been demonstrated.     

Direct observation of active protein folding using lock-in force spectroscopy

Direct observation of the folding of a single polypeptide chain can provide important information about the thermodynamic states populated along its folding pathway. In this study, we present a lock-in force-spectroscopy technique that improves resolution of atomic-force microscopy force spectroscopy to 400 fN. Using this technique we show that immunoglobulin domain 4 from Dictyostelium discoideum filamin (ddFLN4) refolds against forces of ∼4 pN. Our data show folding of this domain proceeds directly from an extended state and no thermodynamically distinct collapsed state of the polypeptide before folding is populated. Folding of ddFLN4 under load proceeds via an intermediate state. Three-state folding allows ddFLN4 to fold against significantly larger forces than would be possible for a mere two-state folder. We present a general model for protein folding kinetics under load that can predict refolding forces based on chain-length and zero force refolding rate.     

Dissociation kinetics of an enzyme-inhibitor system using single-molecule force measurements

We report on an improved method to interpret single molecule dissociation measurements using atomic force microscopy. We describe an easy to use methodology to reject nonspecific binding events, as well as estimating the number of multiple binding events. The method takes nonlinearities in the force profiles into account that result from the deformation of the used polymeric linkers. This new method is applied to a relevant enzyme-inhibitor system, latent matrix metalloprotease 9 (ProMMP-9, a gelatinase), and its inhibitor, tissue inhibitor of metalloproteases 1 (TIMP 1), which are important players in cancer metastasis. Our method provides a measured kinetic off-rate of 0.010 ± 0.003 s(-1) for the dissociation of ProMMP9 and TIMP1, which is consistent with values measured by ensemble methods.     

Dynamic force measurements of avidin-biotin and streptavdin-biotin interactions using AFM

Using atomic force microscopy (AFM) we performed dynamic force measurements of the adhesive forces in two model systems: avidin-biotin and streptavidin-biotin. In our experiments we used glutaraldehyde for immobilization of (strept)avidin on the tip and biotin on the sample surface. Such interface layers are more rigid than those usually reported in the literature for AFM studies, when (strept)avidin is coupled with biotinylated bovine albumin and biotin with agarose polymers. We determined the dependence of the rupture forces of avidin-biotin and streptavidin-biotin bonds in the range 300-9600 pN/s. The slope of a semilogarithmic plot of this relation changes at about 1700 pN/s. The existence of two different regimes indicates the presence of two activation barriers of these complexes during the dissociation process. The dissociation rates and activation energy barriers, calculated from the Bell model, for the avidin-biotin and streptavidin-biotin interactions are similar to each other for loading rates > 1700 pN/s but they are different from each other for loading rates < 1700 pN/s. In the latter case, the dissociation rates show a higher stability of the avidin-biotin complex than the streptavidin-biotin complex due to a larger outer activation barrier of 0.8 k(B)T. The bond-rupture force is about 20 pN higher for the avidin-biotin pair than for the streptavidin-biotin pair for loading rates < 1700 pN/s. These two experimental observations are in agreement with the known structural differences between the biotin binding pocket of avidin and of streptavidin.