Directly repeated, 20-bp sequence of plasmid R1162 DNA is required for replication, expression of incompatibility, and copy-number control

DNA required in cis for the replication of the broad-host-range plasmid R1162 is located on two contiguous HpaII fragments of 210 and 370 bp. The latter of these contains three and one-half, perfectly conserved, 20-bp directly repeated sequences. The significance of these for plasmid replication, incompatibility, and copy-number control was examined by generating deletions into these repeats and testing the properties of the remaining DNA. We conclude from the results that the direct repeats are essential for expression of incompatibility and for the decrease in copy number observed when the directly repeated DNA is cloned into R1162. Little, if any, additional DNA is required from the ori region for these properties. Moreover, deletions of intermediate size result in an intermediate level of incompatibility, indicating the importance of the periodic structure of the direct repeats. The directly repeated DNA is also required for an active origin of replication, as are additional, nonrepeated sequences adjacent to this DNA. The properties of the direct repeats are discussed with respect to their possible role in the replication of R1162 DNA.     

Amplification of a major membrane-bound DNA sequence of Bacillus subtilis.

A membrane-bound DNA sequence from Bacillus subtilis was subcloned into a plasmid which can replicate in Escherichia coli but not in B. subtilis. This plasmid hybridized with an 11-kilobase HindIII fragment which is the major particle-bound fragment in lysates treated with HindIII. The plasmid integrated into the B. subtilis chromosome at the region of homology, conferring chloramphenicol resistance on the recipient. The inserted resistance was mapped close to purA by using the generalized transducing phage AR9. In one chloramphenicol-resistant strain, the pMS31 region was repeated at least 20 times. A large proportion of the copies of the cloned region were present in the particle fraction, indicating that the capacity to bind this region of the chromosome was substantially in excess of the normal dose of the region. The structure of the particle-bound region was sensitive to ionic detergents and high salt concentrations but was not greatly affected by RNase or ethidium bromide. The basis of a specific DNA-membrane interaction can now be studied by using the amplified region, without the complications of sequences required for autonomous plasmid replication.     

The presence of repeated DNA sequences and a partial restriction map of the pSym of Rhizobium fredii USDA193

The large, 350-kb Sym (symbiotic) plasmid pRjaUSDA193 of Rhizobium fredii was examined to determine the frequency of repeated sequences present and to produce a physical and genetic map of a large region of the plasmid. A novel hybridization method, the Southern Cross, revealed that the plasmid pRjaUSDA193 contained many repeated sequences and assisted in restriction enzyme mapping of a 100-kb region containing nod genes. A cosmid clone bank was prepared with the broad-host-range cosmid pVK102. The restriction enzymes HindIII, HpaI, and KpnI were used to construct a physical map of overlapping clones. Labeled nod gene sequences were used to determine their location in the mapped region.     

Genetic organization of plasmid R1162 DNA involved in conjugative mobilization.

DNA involved in the mobilization of broad-host-range plasmid R1162 was localized to a region of 2.7 kilobases within coordinates 3.4 to 6.1 kilobases on the R1162 map. By examining the transfer properties of plasmids containing cloned fragments of DNA from within this region, we showed that at least four trans-active products and a cis-active site (oriT) were involved in mobilization. A cloned DNA fragment of 155 base pairs was capable of providing full oriT activity. This fragment was located within 600 base pairs of DNA containing the origin of replication of R1162, and its nucleotide sequence and that of neighboring DNA were determined. Activation of oriT required R1162-encoded, trans-acting products. Deletions which resulted in the loss of one or more of these had a variable effect on transfer efficiency and indicated the presence of both essential and nonessential Mob products. Regions encoding these products flanked oriT and in one case appeared to overlap a gene essential for plasmid replication. The implications of these findings with respect to the broad host range of R1162 are discussed.     

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.     

Identification and molecular genetic analysis of replication functions of the bacteriocinogenic plasmid pIP404 from Clostridium perfringens

The replication functions of the bacteriocinogenic plasmid pIP404, from Clostridium perfringens, were localized to a 2.8-kb EcoRI-EcoRV fragment by cloning into a vector deficient for replication in Bacillus subtilis. This fragment contains two genes, cop and rep, which encode proteins and an 800-bp noncoding segment of complex structure consisting of multiple tandemly repeated sequences. The Cop protein is involved in copy number control, whereas the rep gene product is essential for plasmid replication. By deletion analysis the minimal origin of replication was defined as the rep gene plus most of the repeated sequences. A powerful promoter producing a 150-nucleotide RNA molecule, RNA1, that could act as an anti-sense RNA to the rep gene was detected in the "origin-like" region. In contrast to most other small plasmids of gram-positive bacteria, pIP404, and its derivatives, does not appear to replicate via a single stranded intermediate in either C. perfringens or B. subtilis.     

Trans- and cis-acting elements for the replication of P1 miniplasmids

Replication-deficient mutants of the unit-copy miniplasmid lambda-P1:5R were isolated after hydroxylamine mutagenesis. Complementation tests showed that the majority of these mutants are defective in the production of the repA protein product. Two of these mutants have suppressible nonsense (amber) mutations. The DNA sequence of one of these, repA103, has been determined. The lesion lies within the repA open reading frame, showing that the repA product is essential for plasmid replication. Complementation of deletion mutants of lambda-P1:5R by repA protein showed that the origin of replication lies to the left of repA and that this 300-base-pair origin region is the only portion of the DNA essential for plasmid replication if repA protein is supplied in trans. Six of the 21 hydroxylamine-induced mutants were not complemented by repA. Replication of three of these could be restored by introduction into the plasmid of a wild-type origin region, suggesting that they were origin-defective. The DNA sequence of two mutants was determined. Mutant rep-11 has a 43-base-pair deletion within the incC sequence (incC is a series of five direct repeats of a 19-base-pair sequence known to be involved in the regulation of plasmid replication). The deletion appears to have been generated by homologous recombination between two repeats. Mutant rep-30 has a single base substitution in a region just to the left of incC that destroys one of five G-A-T-C (dam methylation) sites in this region. As lambda-P1:5R is unable to establish itself as a plasmid in a methylase-defective (dam-) strain, it seems probable that methylation of the G-A-T-C sequences is important for origin function. The incC region and the sequences to its left appear to constitute an essential part of the origin of replication.     

Genetic characterization of the stabilizing functions of a region of broad-host-range plasmid RK2.

One of the regions responsible for the stable inheritance of the broad-host-range plasmid RK2 is contained within the PstI C fragment, located from coordinates 30.8 to 37.0 kb (P.N. Saurugger, O. Hrabak, H. Schwab, and R.M. Lafferty, J. Biotechnol. 4:333-343, 1986). Genetic analysis of this 6.2-kb region demonstrated that no function was present that stabilized by selectively killing plasmid-free segregants. The sequence from 36.0 to 37.0 kb mediated a twofold increase in plasmid copy number, but this region was not required for stabilization activity. The PstI C fragment was shown to encode a multimer resolution system from 33.1 to 35.3 kb. The resolution cis-acting site was mapped to 140 bp, sequenced, and observed to contain two directly repeated sequences of 6 and 7 bases and two perfect inverted repeats of 6 and 8 bases. The trans-acting factor(s) was mapped and functionally determined to encode a resolvase capable of catalyzing recombination at high frequency between cis-acting sites in either direct or inverted orientation. Multimer resolution alone did not account for complete plasmid stabilization by the PstI C fragment, since removal of regions adjacent to the 35.3-kb border of the minimal mrs locus dramatically reduced stabilization. The minimal region required for complete stabilization, from 32.8 to 35.9 kb, was capable of fully stabilizing plasmids independently of the replicon or the recA proficiency of the host. Stabilization activity was also fully expressed in several diverse gram-negative bacteria, whereas the F plasmid par locus functioned only in Escherichia coli. On the basis of these observations, we conclude that under the growth conditions used, the minimal stabilization locus encodes both an mrs activity and a stabilization activity that has the properties of a par locus.     

Genetic and physical map of a P1 miniplasmid

The prophage form of bacteriophage P1 is a unit-copy plasmid which is maintained with great fidelity in its Escherichia coli host. The plasmid maintenance functions of P1 are clustered in one region of the genome. An 11.5-kilobase fragment from this region has been cloned into a lambda delta att vector and promotes stable unit-copy plasmid maintenance. The properties of the lambda vector facilitated the isolation of deletion mutants affecting the P1 DNA. Twenty-eight deletion mutants were isolated, and their lesions were mapped by physical techniques. The genetic properties of the mutants with respect to plasmid replication, stability of plasmid maintenance, and ability to exert incompatibility effects against P1 and P7 plasmids were determined. These properties, along with those of several subfragments of the P1 insert cloned into high-copy-number plasmid vectors, allow the construction of an unambiguous genetic and physical map of the maintenance functions. A region of less than 3 kilobases, the rep region, is essential for plasmid replication and contains the incA incompatibility determinant within an 800-base-pair segment. Immediately adjacent to rep is a second region of approximately 3 kilobases which is required for stable plasmid maintenance, but not replication. This region, par, contains a second incompatibility element incB which is approximately 1 kilobase in size. The par region appears to specify equipartition of plasmid copies to daughter cells during cell division.     

Fine-structure analysis of the DNA sequence requirements for autonomous replication of Saccharomyces cerevisiae plasmids.

An autonomously replicating segment, ARS, is located 293 base pairs downstream from the histone H4 gene at the copy-I H3-H4 locus. The sequences needed for autonomous replication were defined by deletion analysis to include an ARS consensus sequence and an additional 3'-flanking region. External deletions into the 3'-flanking yeast sequences resulted in a loss of replication function. However, disruptions of the required 3'-flanking domain by either 10-base-pair linker-scanning substitutions or larger internal deletions did not impair autonomous replication. Thus, replication is dependent upon a flanking chromosome domain, but not an exact DNA sequence. The extent of the yeast sequences required in the 3'-flanking domain is variable depending on the nature of neighboring plasmid vector sequences. That is, there are certain vector sequences that prohibit replication when they are placed too close to the ARS consensus. These results suggest that the functional 3'-flanking domain of the H4 ARS is a specific DNA or chromatin structure or both.     

Aerobactin iron uptake sequences in plasmid ColV-K30 are flanked by inverted IS1-like elements and replication regions.

By using Southern blot hybridization procedures, we found that a specific sequence within a 16.3-kilobase HindIII restriction fragment of pColV-K30 was also present in at least three other pColV-K30 HindIII fragments. Restriction endonuclease mapping of these HindIII fragments indicated that two of these repeated sequences, identified as IS1-like, occur in reverse orientation adjacent to the ends of the aerobactin iron uptake region, also included in the 16.3-kilobase HindIII fragment. There are two distinct replication regions enclosing the IS1-flanked aerobactin genes. A pColV-K30 BamHI restriction endonuclease fragment, carrying one of these replication regions, showed homology with the F plasmid EcoRI fragment f5, which carries the F replication sequences.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

Minimal region necessary for autonomous replication of pTAR.

The native 44-kilobase-pair plasmid pTAR, discovered in a grapevine strain of Agrobacterium tumefaciens, contains a single origin of DNA replication confined to a 1.0-kilobase-pair region of the macromolecule. This region (ori) confers functions sufficient for replication in Agrobacterium and Rhizobium species but not in Pseudomonas solanacearum, Pseudomonas glumae, Pseudomonas syringae pv. savastanoi, Xanthomonas campestris pv. campestris, and Escherichia coli. ori contains a repA gene that encodes a 28,000-dalton protein required for replication. Nucleotide sequencing of repA and its promoter region revealed four 8-base-pair palindromic repeats upstream of the repA coding region. Deletion of these repeats alters repA expression and plasmid copy number. Downstream of repA are three additional repeats in a region essential for replication. A locus responsible for plasmid partitioning (parA) and a putative second locus regulating plasmid copy number are part of the origin region and are required for stable plasmid maintenance.