Bifunctional oligonucleotide probes synthesized using a novel CPG support are able to detect single base pair mutations.

A novel multifunctional controlled pore glass, MF-CPG (Fig. 1), has been synthesized and used to incorporate 3' terminal primary aliphatic amines into synthetic oligonucleotides. MF-CPG consists of a unique succinic acid linking arm which possesses both a masked primary amine for label attachment and a dimethoxytrityl protected hydroxyl for nucleotide chain elongation. Using MF-CPG, we have devised a simple and convenient technique to attach non-radioactive labels to the 3' terminus of oligonucleotides. Bifunctional probes can then be constructed by 32P labeling the 5' terminus with T4 kinase and gamma 32P-ATP. Using such bifunctional oligonucleotide probes in conjunction with polymerase chain reaction (PCR) amplification, we were able to detect single base substitutions in a target segment of the human H-ras protooncogene employing either functionality. Our technique thus expands the potential applications for oligonucleotides as hybridization probes.     

Sequencing-independent method to generate oligonucleotide probes targeting a variable region in bacterial 16S rRNA by PCR with detachable primers

Oligonucleotide probes targeting the small-subunit rRNA are commonly used to detect and quantify bacteria in natural environments. We developed a PCR-based approach that allows synthesis of oligonucleotide probes targeting a variable region in the 16S rRNA without prior knowledge of the target sequence. Analysis of all 16S rRNA gene sequences in the Ribosomal Database Project database revealed two universal primer regions bracketing a variable, population-specific region. The probe synthesis is based on a two-step PCR amplification of this variable region in the 16S rRNA gene by using three universal bacterial primers. First, a double-stranded product is generated, which then serves as template in a linear amplification. After each of these steps, products are bound to magnetic beads and the primers are detached through hydrolysis of a ribonucleotide at the 3' end of the primers. This ultimately produces a single-stranded oligonucleotide of about 30 bases corresponding to the target. As probes, the oligonucleotides are highly specific and could discriminate between nucleic acids from closely and distantly related bacterial strains, including different species of VIBRIO: The method will facilitate rapid generation of oligonucleotide probes for large-scale hybridization assays such as screening of clone libraries or strain collections, ribotyping microarrays, and in situ hybridization. An additional advantage of the method is that fluorescently or radioactively labeled nucleotides can be incorporated during the second amplification, yielding intensely labeled probes.     

Nonradioactive labeling with chemically modified cytosine tails by the polymerase chain reaction.

We developed a modified nonradioactive method for the detection of DNA. This method makes use of the polymerase chain reaction for preparation of probes; that is, a DNA fragment inserted in the polylinker region of an M13 or pUC vector is amplified with primers that have a modified cytosine tail at the 5' terminus (C-tailed primers). By this method, large amounts of labeled probes can be obtained easily. After hybridization, modified cytosine tails can be detected immunologically. DNA labeled by this method could be used in plaque hybridization. We could detect 0.05 pg of dot-blotted labeled DNA in 30 min with an enzyme-catalyzed chemiluminescence reaction.     

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5' overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.     

Cassette labeling for facile construction of energy transfer fluorescent primers.

DNA primer sets, labeled with two fluorescent dyes to exploit fluorescence energy transfer (ET), can be efficiently excited with a single laser line and emit strong fluorescence at distinctive wavelengths. Such ET primers are superior to single fluorophore-labeled primers for DNA sequencing and other multiple color-based analyses [J. Ju, C. Ruan, C. W. Fuller, A. N. Glazer and R. A. Mathies (1995) Proc. Natl. Acad. Sci. USA 92, 4347-4351]. We describe here a novel method of constructing fluorescent primers using a universal ET cassette that can be incorporated by conventional synthesis at the 5'-end of an oligonucleotide primer of any sequence. In this cassette, the donor and acceptor fluorophores are separated by a polymer spacer (S6) formed by six 1',2'-dideoxyribose phosphate monomers (S). The donor is attached to the 5' side of the ribose spacer and the acceptor to a modified thymidine attached to the 3' end of the ribose spacer in the ET cassette. The resulting primers, labeled with 6-carboxy-fluorescein as the donor and other fluorescein and rhodamine dyes as acceptors, display well-separated acceptor emission spectra with 2-12-fold enhanced fluorescence intensity relative to that of the corresponding single dye-labeled primers. With single- stranded M13mp18DNA as the template, a typical run with these ET primers on a capillary sequencer provides DNA sequences with 99% accuracy in the first 550 bases using the same amount of DNA template as that typically required using a four-color slab gel automated sequencer.     

Synthesis and application of circularizable ligation probes

We describe a PCR-based approach for the synthesis of circularizable ligation probes (CLiPs). CLiPs are single-stranded probes that consist of target-specific ends separated by a noncomplementary "linker" sequence. When hybridized to a target, the CLiP forms a nicked circle that may be sealed by DNA ligase only if the 5' and 3' ends show perfect Watson-Crick base pairing, thus enabling the discrimination of single nucleotide polymorphisms. Primers incorporating target sequence at their 5' end and plasmid sequence at the 3' end were used in a PCR amplification. In addition, the antisense primer was 5' labeled with biotin, and the amplification was performed in the presence of fluorescently labeled dUTP. The resulting PCR product was captured with streptavidin-coated paramagnetic beads, and the top strand, which forms the CLiP, was alkali eluted. This PCR-based method has allowed the synthesis of CLiPs that are larger and more highly labeled than has previously been possible, with ligation efficiencies similar to those of the purest chemically synthesized padlock probes. Ligations performed in the presence of cognate or mismatched sequence were analyzed by denaturing PAGE using a fluorescent DNA sequencer. Genotyping using target immobilized to nylon membranes was also performed. The CLiPs were readily able to distinguish between mutant and wild-type alleles for the common genetic disorder, 21-hydroxylase deficiency. Additionally, CLiPs of different lengths were synthesized and compared.     

Analysis of oligonucleotide microarrays by 3' end labeling using fluorescent nucleotides and terminal transferase

A simple enzymatic labeling procedure is described to determine spot quality in oligonucleotide microarrays. By using fluorescently labeled dideoxynucleotides or ribonucleotides as substrate for terminal deoxynucleotidyl transferase (TdT), a single fluorophore can be covalently attached at the 3' end of each oligonucleotide probe molecule in the spot. Fluorescein-12-ddUTP CyTM3-ddUTP Cy5-UTP, and Cy3-UTP were compared as TdT substrates for 3' end labeling an array of 1273 hexamer probes. Cy5-UTP was found to show minimal bias toward probe base composition and is therefore well suited for quantitative analysis of microarray spots where the oligonucleotide probes are coupled via a 5' end linkage to the solid phase.     

Incorporation of cytosine arabinoside monophosphate into DNA at internucleotide linkages by human DNA polymerase alpha.

The incorporation of cytosine arabinoside monophosphate (araCMP) into DNA at internucleotide linkages by DNA polymerase alpha (DNA pol alpha) has been investigated by using oligonucleotide primed DNA templates. The products of reactions catalyzed by DNA pol alpha in vitro were analyzed on polyacrylamide gels to measure insertion of araCMP, extension from an araCMP 3' terminus, and binding of the enzyme to an araCMP 3' terminus. The results show that insertion of araCMP opposite dGMP in the DNA template is about 3-fold less efficient than insertion of dCMP. Extension from an araCMP 3' terminus by addition of the next complementary nucleotide is approximately 2000-fold less efficient than extension from a correctly base-paired 3' terminus. In the absence of the second substrate, dNTP, DNA pol alpha binds with approximately equal affinities to DNA templates that contain oligonucleotide primers with araCMP or dCMP positioned at the 3' terminus. In the presence of dNTP, the enzyme extends the araCMP 3' terminus or dissociates, but it is not trapped at the araCMP 3' terminus in a nonproductive ternary complex as is observed at the ddCMP 3' terminus. To determine if slow phosphodiester bond formation contributes to the observed extension rate from the araCMP 3' terminus by DNA pol alpha, oligonucleotide primers with araCMP positioned at the 3' terminus were elongated by addition of the alpha-phosphorothioate analogue of the next complementary nucleotide. The rate of extension from araCMP by addition of 2'-deoxyadenosine 5'-O-phosphorothioate (dAMP alpha S) was 6-fold slower than by addition of dAMP, indicating that bond formation is partially rate limiting in the extension reaction. Thus, inefficient extension from the araCMP 3' terminus is the major determinant contributing to the low incorporation frequency of araCMP into DNA by DNA pol alpha, and this inefficiency can be attributed, in part, to slower phosphodiester bond formation at the araCMP 3' terminus.     

Discrimination Amongst Leishmania by Polymerase Chain Reaction and Hybridization with Small Subunit Ribosomal DNA Derived Oligonucleotides

ABSTRACT. A method for discriminating among Leishmania is described, based upon small subunit ribosomal DNA sequence differences. The method was to amplify the entire 2.2 kb small subunit rDNA by polymerase chain reaction using conserved primers specific for the 5' and 3' termini of the small subunit ribosomal RNA, and then hybridize the product dotted onto nylon membranes with labeled oligonucleotides. The design of the hybridization probes was based upon complete small subunit rDNA sequences from L. amazonensis, L. major and L. guyanensis and partial sequences of L. mexicana, L. braziliensis, L. tropica and L. chagasi. A high degree of sequence similarity (> 99%) among species was found. However, sufficient sequence divergence occurred to permit the design of internal oligonucleotide probes specific for species complexes. This procedure successfully discriminated amongst a wide range of Leishmania isolates. The method detected as few as 10 cultured organisms and detected parasites in tissue samples from experimentally infected animals. Non-radioactive labeling showed the same specificity and sensitivity as radioactive probes.     

Fixed archival tissue

The labeling of oligonucleotide probes using a fluorescein-labeled nucleotide is described. The reaction is characterized by careful control of the nucleotide and probe molar ratio in order to produce a tail that gives good detection sensitivity without compromising hybridization stringency control of the probe sequence. The labeling reaction can be easily monitored for incorporation of the fluorescent label and the probes can be used in many applications.     

Detection of hyperthermophilic archaea of the genus Desulforococcus by hybridization with oligonucleotide probes

Based on the analysis of nucleotide sequences of 16S rRNA, oligonucleotide probes were designed for the detection and identification of representatives of the genus Desulfurococcus (kingdom Crenarchaeota of the domain Archaea). The detection procedure included obtaining of PCR products on DNA isolated from pure cultures, enrichments, or natural samples with a Crenarchaeota-specific primer pair designed: Cren 7F (5'-TTCCGGTTGATCCYGCCGGACC-3') and Cren 518R (5'-GCTGGTWTTACCGCGGCGGCTGA-3'). The PCR products were hybridized with Dig-11-dUTP-labeled oligonucleotide probes targeting the genus Desulfurococcus (Dco 198, 5'-CGTTAACYCCYGCCACACC-3) and its species D. mobilis (Dco_mob 198, 5'-CGTTAACCCCTGCCACACC-3') and D. amylolyticus (Dco_amy 198, 5'-CGTTAACCCCCGCCACACC-3'). With the use of these primers and probes, four new strains isolated from hydrotherms of Kamchatka and Kunashir Island were identified as members of the species Desulfurococcus amylolyticus. Desulfurococcus representatives were detected in several natural samples, including a sample taken from a marine hydrotherm at the Kunashir Island; this demonstrates that representatives of this genus occur not only in terrestrial but also in marine environments.     

Early steps in the path of nascent ribonucleic acid across the surface of ribonucleic acid polymerase, determined by photoaffinity labeling

The photoaffinity probes beta-(4-azidophenyl) adenosine 5'-diphosphate (N3PhppA) and beta-(4-azidophenyl) adenylyl-(3'--5')-uridine 5'-diphosphate (N3PhppApU) were used to determine the RNA polymerase subunit contacts made by the 5' ends of three nascent RNA chains. Ternary enzyme-poly[d(A-T)].oligonucleotide complexes were prepared in which the nascent oligonucleotide contained a photoaffinity label at the 5' end and a 32P radiolabel only at the 3' end. The length of the RNA was fixed at two, three, or four nucleotides. Photolysis of the ternary complexes was followed by dissociation, polyacrylamide gel electrophoresis, autoradiography, and scintillation counting. With a dinucleotide probe, the enzyme subunits labeled were beta' (71%) and sigma (21%). Photolysis of the ternary complex containing trinucleotide RNA also resulted in labeling of the beta' (64%) and sigma (35%) subunits. With a tetranucleotide, the beta' subunit was very heavily labeled (88%), and a small amount of labeling of the beta (7%) and sigma (4%) subunits was observed. The alpha subunit was not labeled with any of the probes. These results imply that a conformational change, possibly involving dissociation of the sigma subunit, occurs in the enzyme as the ribonucleotide is elongated from a tri- to a tetranucleotide.